Data and/or specifications

Similar Questions

• variable date and a specific time

  I'm trying to create a query that returns records in db, based on the date and time, the date changes (IsToday) but the time is a constant (16:30).
  
  < name CFPARAM = "IsToday" DEFAULT = "#CreateODBCDate (Now ()) #" >
  
  Is it possible to add a time constant to Now() so that only records with a datetime value that is less than 16:30 Now() would be identified?

  CreateDateTime (Year (Now (), Month (Now (), Day (Now (), 16, 30, 0)

• queryNew type date and time specific only to the second?

  I create a game or an application using queryNew() split a query longer into related parts.  One of the fields in the larger query is a date-time filed with millisecond data that relate to proplerly sort records.  Apparently, the queryNew() function time and date data types are accurate for only the second and is to truncate the necessary data from Ms.

  First question is possible to change this behavior and have the date of queryNew() and | or data types time be more accurate.

  Oh, and I am a muppet. Use 'timestamp' data type.

• How to plan to clear all alarms in Foglight on a specific date and time?

  Here's what I want to accomplish informing a group of people that all alarms will be erased and then foglight removes all the weapons on a specific date and time

  ..

  1

  I'd like to be able to plan / create a rule or any other option available to use... to be able to send an email through foglight or notification to a specific group of people telling them that all messages will be deleted.

  2nd

  What I'm looking for must be able to clear all alarms in Foglight to a date and a specific time.

  I just noticed this has not had a response.

  I hope that you could see the information contained in the KB, some items may have been written there so I recommend for anyone who wants to use it to test on a test server or check with the support, if there are recent scripts.

  How to purge the alarms? How to program the purge of alarms? (40651)

  Clear the alarms then X days (74729)

  How to clear alarms command line? How to program the clearing of alarms? (51324)

  Is there a way to clean only certain rules specific alarms? (73003)

  How to accuse reception/Clear old messages older then X number of days automatically (72146)

  Regarding the sending of notifications on a schedule, I think the simplest if to set that plan and create a rule with a true value, which is only applicable to this annex (annex rule or rule that is valid on a precise timetable) and has the action to send the notification to users on the alarms about to be cleared/purged.

  Hope this helps

  Golan

• How can I the date and time using regular expressions

  Hi all

  I have depolyed filtering the log agent. While setting properties, I would like to recover the file that is generated at the present time, but along the way, I am unable to define, what regular expression that I provide retireves date and time specific file...

  Leave with kindness, men know is it possible to do?

  Thanks in advance.

  Shiva

  This seems to be the same question I can't add a timestamp in logfilter, so I'll answer in this thread. Please check the two wires as "Answered" when the issue has been resolved.

  Kind regards

  Brian Wheeldon

• check total number date to a specific date and time:

  Hi all,
  
  How can I check total no date to a specific date and time:
  
  This is the sample data (on the entry_date field). I tried to use the SUBSTR to isolate the time, but he has just given a null value. Help, please. Thank you.
  
  for example: 29/09/2004 14:25:30

  Hello

  Try the following code.

  SELECT COUNT(*) FROM  WHERE TO_NUMBER(TO_CHAR(ENTRY_DATE, 'YYYYMMDDHH24MI')) BETWEEN TO_NUMBER(TO_CHAR(, 'YYYYMMDD') || '0600') AND TO_NUMBER(TO_CHAR(, 'YYYYMMDD') || '1000');
  

  Kind regards

  Manu.

• [OSB] Specification of date and hour format custom in the generator of MFL/Format

  It is possible to specify a date and time format customized by MFL (e.g. use of the Format, or directly from the MFL XML document generator). I work with a file format that contains dates of the form:
  Bq yyyymmmdd HHMM .
  that is a chain of fourteen characters, with a year to four numbers, three letters, two-digit day, a space as separator, followed by a two-digit hour and a two-digit minute. Each part is included in at least one of the available conversion specifiers, but date part, the part of time, or whole, are available in the form of a standard conversion specifier. I was not able to find a reference to formats date and hour customized using the Format generator or Non - XML data Mapping sample.
  
  Of course, the field can be treated as a string and converted downstream, but it had a native XML dateTime type as part of the conversion would be ideal.
  
  Note that the Native Format Manager supports date formats specified by the user, as shown in [http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/nfb.htm#CCGJDGGJ].
  
  Thank you
  
  Geoff.
  
  Edited by: geofft 1 Sep 2008 11:09

  The asnwer is in your question:

  Note that the Native Format Manager supports date formats specified by the user, as shown in the http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/nfb.htm#CCGJDGGJ.

  It is not possible.

  Marc

• How to export my history of travel (including the date and time) to a text file?

  I need to collect data on the amount of time I spend on specific sites, research on my thesis topic. In my browsing history data. I need a way to export the data from the history file including the date and time information in a format that is easy to parse (.txt file delimited by commas, etc.)

  You are welcome

• Search a directory of data and display the data that is within the range of dates

  Hello

  I have a full idrectory of data from overtime, and I think of search in the directory and display the data files for specific dates. I only started this encoding yet but I figure I'll take the brain of some SMEs here labview and start in the right direction. My goal is to go through a comprehensive directory of data taken for a month or MORE csv files and select the data to process and display office files the date of its registration. If I take the data of last week, last month or last minute, it should just treat as an exact or more.

  Please help me get started on the right foot

  End date will be probably greater than the start date, right? So, end date must connect at the entrance to the upper limit. Then wire in the range? to the conditional terminal of a tunnel of conditional indexation.

  Lynn

• request to help build a vi to acquire a signal of pc6251 for the acquisition of data and perform fft it can u people please help me? Thanks in advance

  Hi all... I learn LabVIEW since few days.i want to acquire a signal of pc6251 of acquisition of data and perform fft it can u people please help me? Thanks in advance

  If you do only use LabVIEW for a few days, you should get familiar with it first by looking at some of the resources available here. After that, you can watch heredata acquisition.

  After reviewing these documents, you can post back with any specific questions.

• Send data and receive commands by VBAI of VB or c#

  Hi, anyone has examples on how to send VBAI data and receive commands by VBAI of VB or c#.

  I intend to hand over command to the VBAI on and outside, get the image and stop start.

  For the data to be send are the result of the calculation of the calculator function. The data send each time to do the math.

  I have search the forum and I know that this can be done by using labVIEW. However, due to the requirement of the question, I can't do it using labVIEW.

  Thank you.

  Yen

  Hi Yen,

  "" "You're almost there. '" Here are the steps for this example works.

  Once you open the inspection in Vision Builder, go to tools > Communication Device Manager...

  You must create a Modbus master device, which corresponds to your communication of VB with Vision Builder application.

  Click on the new device. Give it a name, say "VB program".

  Select Modbus TCP for the Protocol.

  Click OK.

  On the Modbus server line, click Start Server. This starts the background task which is listening on port 502 for incoming Modbus messages.

  Click OK to exit the dialog box.

  Now, a couple of things to understand about Modbus: the Protocol specifies how a device Modbus master can read and write registers located on a slave device. Vision Builder has 4 64 k save tables:

  -Coils (read/write binary, by the master).

  -Tor inputs (binary, not read by the master).

  -Entrance to the registers (16 bits, not read by the master).

  -Holding Registers (16-bit, read/write by the master).

  The tolerances of the inspection reading read minimum and maximum intensity in Modbus 0 x 0 and 0 x 1 operating records.

  If you want your VB application to write these values.

  Here's the Modbus function codes. You can get the full list by downloading the specification to Modbus.org Modbus.

  0 x 01 reading reels

  0x02 read discrete inputs

  0 x 03 playback record keeping

  0x04 read input registers

  0x05 write single coil

  0 x 06 write single register

  0x0F write multiple coils

  0x10 write multiple registers

  To use your example Modbus program to read and write registers Vision Builder, first enter the IP where Vision Builder is running:

  127.0.0.1 (localhost)

  For this example, use the function Code 6 to write a single business registration.

  The Modbus data must be formatted as follows: the first 2 bytes are the starting address, the following 2 bytes are the value (U16) you want to write to the registry. So to write the value 1 at 0 (corresponding to the intensity of the min), the data value Modbus 00000001. Click on send.

  Now, to set the maximum intensity at 50. Set the data to 00010050. Click on send.

  Step write data written minimum intensity of step to check the presence of CAP in the Modbus 0 x 0 registry entry and the status of the step in discreet entrance 0 x 0.

  To read the intensity Minimum written by VBAI, the value of the function 4 Code (enter reading registry). For the Modbus data, the first 2 bytes represent the address, 2 bytes, the number of registers to read. The value of data Modbus 00000001 to read a single registry entry to address 0. Click on send. The response data can be for example 0x1E, which corresponds to 30 decimal places.

  To read the status of the step, set the function Code 2 to read discrete inputs. The value data 00000001, to read the first register of the discreet entry table located at address 0. The response data is 0 or 1 (success or failure).

  I hope this helps. Let me know if you need other information. But this should help you get started.

  Best regards

  -Christophe

• Date and time in a table of numbers - is it possible?

  Hello

  I have a table with specific measurement data of float and I save it in a spreadsheet, so that I can easily open it with Excel.

  Now, I want to win the date of the end of time as well.

  To achieve this, I changed the table of double chain and converted into all the numbers and the date and time strings, but it is not very economical.

  Can I record the date and time in a digital format, which excel can interpret as the date and time?

  I think the following:

  These numbers:

  39303

  0,66134502

  converted to the format of date and time in excel are:

  09.08.2007

  15:52:20

  How to convert date and time to numbers in LabVIEW, so that excel can convert to the date and time again?

  Johannes

  LabVIEW 7.1 (!)

  Hi Johannes,

  This link should help.

  http://www.Ozgrid.com/Excel/ExcelDateandTimes.htm

  Mike

• How to include the install date and time in the registry keys

  Hi all

  I hope someone can help me. I'm creating a Setup program that includes properties in the construction specifications. I also wannt to include certain registry keys to add during installation:

  1. I understand the application installation directory by providing the key to [INSTALLDIR] value. This seems to work fine and I have no problem with that.

  2. the other key I would include (but I don't know how) indicates the date and the time of installation. Is it possible to automatically include this in a (similar to INSTALLDIR) registry key?

  I look forward to your expert advice!

  Kind regards

  Larry

  Larry,

  You can configure an exe must be run after Setup is finished. So, you can write a small application using the registry functions of Windows that retrieves the current timestamp and store it in some key.

  Norbert

• My problem is setting in my office date and time.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! every time I have to connect to my laptop, an error message will appear. I need to check my date and time. and when I check, it does not. I tried manually reseting but it did not work when I restart my computer. Also in my date & time zone there is no specific place which may work for me. Theres no philippines listed. And I tried the update at the time of the internet and the answer is successful. but when I re start my computer is the same problem I met.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Chances are good that the CMOS battery that powers the clock when the computer is shut down has not or it is so low, that it is working properly.  Try to replace the battery and see if that solves the problem with the clock not the hold time (and this willl happen if you use the time synchronization because when the power is off, the clock needs the battery to keep read time).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Group by Date and place of DateTime

  Hello

  I'm looking for some counts that are grouped by date / time to date.  For example, I run the query below.

  ALTER session SET NLS_DATE_FORMAT = "mm/dd/yyyy";

  SELECT count (distinct contact_id) as charges, created in the created_date

  of s_con_chrctr

  where created > = TO_CHAR('07/01/2015') and created < = TO_CHAR('07/10/2015')

  and created_by = 1-J9455J'

  Group by created;

  The results are as follows.

  COUNTIES	CREATED_DATE
  1	02/07/2015
  1	02/07/2015
  1	02/07/2015
  1	02/07/2015

  I think that what is happening because this column is a datetime column and his back one record for each time specific in this day.  The results, I'm looking for are...

  COUNTIES	CREATED_DATE
  15	02/07/2015
  17	03/07/2015
  35	04/07/2015
  11	05/07/2015

  How to change my query to group by date and not by date time?

  So created is a date, then do not compare with TO_CHAR literals.

  If you want to skip the part time in your account, use TRUNC:

  SELECT count (distinct contact_id) as charges, TRUNC (created) as created_date

  of s_con_chrctr

  where created > = TO_DATE (July 1, 2015 "," MM/DD/YYYY ') and created< to_date('07/11/2015',="">

  and created_by = 1-J9455J'

  TRUNC Group (created);