Data Guard and connectable to database

Similar Questions

• Problem link DB between active Data Guard and reports application database

  My version of the 11.2.0.2.0 and OS database is Oracle Solaris 10 9/10.
  I am facing a problem in my custody of data Active data base for purposes of tax. Active Data guard information is as below.
  
  SQL > select name, database_role, open_mode from v$ database;
  
  NAME DATABASE_ROLE OPEN_MODE
  --------- ---------------- --------------------
  ORCL PHYSICS READ SHALL ONLY APPLY
  
  Detail of the problem is less than
  ------------------------------
  I have created a db link (name: DATADB_LINK) between active data guard and report of application of data base for purposes of tax.
  SQL > create database DATADB_LINK link to connect to HR identified by HR using 'DRFUNPD ';
  Database link created.
  
  But when I run a query using db link to my database of enforcement report I got this error below.
  
  ORA-01555: snapshot too old: rollback segment number 10 with the name ' _SYSSMU10_4261549777$ ' too small
  ORA-02063: preceding the line of DATADB_LINK
  
  Then I see logfile named database alart Active Data Guard and get below error
  
  ORA-01555 caused by the following SQL statement (SQL ID: 11yj3pucjguc8, time of request = 1 sec, SNA: 0x0000.07c708c3): SELECT "A2". "' BUSINESS_TRANSACTION_REFERENCE ', 'A2 '. "' BUSINESS_TRANSACTION_CODE ', MAX (CASE 'A1'. "TRANS_DATA_KEY"WHEN "feature' AND 'A1'." " END OF TRANS_DATA_VALUE"), MAX (CASE 'A1'. "TRANS_DATA_KEY" WHEN 'otherFeature' THEN 'A1' '. "" END OF TRANS_DATA_VALUE")
  
  But the interesting point if I run the query report directly in the Active Data Guard database, I got never error.
  
  So it's a problem of link DB between active Data Guard and other databases?

  Fazlul Kabir Mahfuz wrote:
  My version of the 11.2.0.2.0 and OS database is Oracle Solaris 10 9/10.
  I am facing a problem in my custody of data Active data base for purposes of tax. Active Data guard information is as below.

  SQL > select name, database_role, open_mode from v$ database;

  NAME DATABASE_ROLE OPEN_MODE
  --------- ---------------- --------------------
  ORCL PHYSICS READ SHALL ONLY APPLY

  Detail of the problem is less than
  ------------------------------
  I have created a db link (name: DATADB_LINK) between active data guard and report of application of data base for purposes of tax.
  SQL > create database DATADB_LINK link to connect to HR identified by HR using 'DRFUNPD ';
  Database link created.

  But when I run a query using db link to my database of enforcement report I got this error below.

  ORA-01555: snapshot too old: rollback segment number 10 with the name ' _SYSSMU10_4261549777$ ' too small
  ORA-02063: preceding the line of DATADB_LINK

  Then I see logfile named database alart Active Data Guard and get below error

  ORA-01555 caused by the following SQL statement (SQL ID: 11yj3pucjguc8, time of request = 1 sec, SNA: 0x0000.07c708c3): SELECT "A2". "' BUSINESS_TRANSACTION_REFERENCE ', 'A2 '. "' BUSINESS_TRANSACTION_CODE ', MAX (CASE 'A1'. "TRANS_DATA_KEY"WHEN "feature' AND 'A1'." " END OF TRANS_DATA_VALUE"), MAX (CASE 'A1'. "TRANS_DATA_KEY" WHEN 'otherFeature' THEN 'A1' '. "" END OF TRANS_DATA_VALUE")

  But the interesting point if I run the query report directly in the Active Data Guard database, I got never error.

  So it's a problem of link DB between active Data Guard and other databases?

  Check this statement that applies to your environment

  * ORA-01555 on Active Data Guard Standby Database [1273808.1 ID] *.

  also

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:8908307196113

• 12 c database Data Guard and connectable to DR

  Hi all

  I have a database upgrade from 11.2.0.3 to 12.1.0.2 to come. The current set up is the PROD & DR are 11g data protection configuration and it works fine. The two databases are in ASM and the configuration is exactly the same as well PROD & DR sites. The database is currently 25 TB.

  I understand how make the upgrade to 12 c, then let cascading changes through on the DR database - so NON - CBD on both sites. Thinking aloud here, I would plug in the PROD database into a new CBD. I suppose I create a CBD DR and then convert DR pluggable database, modify the dataguard config (as it is at the level of the container in 12 c) and plug into the DR database in the new CBD DR? Then copy the archivelogs of CBD PROD on the DR site to fix gaps. This approach wouldn't work?

  Thoughts everyone?

  Thank you

  Vic010

  OK Oracle confirmed - you must copy the data files to the doctor and then rebuild the database of DR... Is not ideal if your database is 25 to and in full swing. The last time, he had to rebuild the database, it took a week...

  Vic010

• Data Guard and auditor of the Apex

  Hi all

  I seem to be unable to understand the configuration of parameters for protective Apex listener when connecting to a database.

  We have a lot of servers of databases (without data guard) and we use the command line Wizard to generate the configuration file. It's straigthforeward and
  easy. We enter the server, port, and Service_name and it works.

  But for a guard database, there are two servers and I seem to be unable to set it in the right way. After doing some research I came across the parameter apex.db.customURL which should solve the problem.

  I removed the references to the server, port, and Service_name and put the key in.

  The result were errors of connection due to some incorrect port settings.

  SEVERE: The pool named: apex is not properly configured, error: IO error: format invalid number for the port number

  oracle.dbtools.common.jdbc.ConnectionPoolException: the pool named: apex is not properly configured, error: IO error: format invalid number for the port number

  at oracle.dbtools.common.jdbc.ConnectionPoolException.badConfiguration(ConnectionPoolException.java:65)

  What Miss me?

  Thank you
  Michael

  (Here's the rest of our configuration :)

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  < ! DOCTYPE SYSTEM property "http://java.sun.com/dtd/properties.dtd" > ""

  Properties of <>

  < comment > saved on Mon Oct 19 18:28:41 CEST 2015 < / comment >

  < key "debug.printDebugToScreen entry" = > false < / entry >

  < key "security.disableDefaultExclusionList entry" = > false < / entry >

  < key = "db.password entry" > @055EA3CC68C35F70CF34A203A8EE1A55D411997069F6AE9053B3D1F0B951D84E0E < / entry >

  < key = "enter cache.maxEntries" > 500 < / entry >

  < key = "enter error.maxEntries" > 50 < / entry >

  < key = "enter security.maxEntries" > 2000 < / entry >

  < key = "cache.directory entry" > / tmp/apex/cache < / entry >

  < enter key = "jdbc. DriverType"> thin < / entry >

  < key = "enter log.maxEntries" > 50 < / entry >

  < enter key = "jdbc. MaxConnectionReuseCount"> 1000 < / entry >

  < key "log.logging entry" = > false < / entry >

  < enter key = "jdbc. InitialLimit' > 3 < / entry >

  < enter key = "jdbc. MaxLimit' 10 > < / entry >

  < key = "enter cache.monitorInterval" 60 > < / entry >

  < key = "enter cache.expiration" > 7 < / entry >

  < key = "enter jdbc.statementTimeout" > 900 < / entry >

  < enter key = "jdbc. MaxStatementsLimit' 10 > < / entry >

  < key = "misc.defaultPage entry" > apex < / entry >

  < key = "misc.compress" / entry >

  < enter key = "jdbc. MinLimit"> 1 < / entry >

  < key = "cache.type entry" > lru < / entry >

  < key "cache.caching entry" = > false < / entry >

  < key "error.keepErrorMessages entry" = > true < / entry >

  < key = "cache.procedureNameList" / entry >

  < key = "cache.duration entry" > days < / entry >

  < enter key = "jdbc. InactivityTimeout"1800 > < / entry >

  < key "debug.debugger entry" = > false < / entry >

  < key = "enter db.customURL" > JDBC: thin: @(DESCRIPTION = (ADDRESS_LIST = (ADRESSE = (COMMUNAUTÉ = tcp.world) (PROTOCOL = TCP) (host = DB-ENDUR) (Port = 1520)) (ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL=TCP) (Host = DB-ENDURK) (PORT = 1521)) (LOAD_BALANCE = off)(FAILOVER=on)) (CONNECT_DATA = (SERVICE_NAME = ENDUR_PROD.) VERBUND.CO. «"" AT))) < / entry >»»»

  < / properties >

  
  
  

  Hi Michael Weinberger,

  Michael Weinberger wrote:

  I seem to be unable to understand the configuration of parameters for protective Apex listener when connecting to a database.

  We have a lot of servers of databases (without data guard) and we use the command line Wizard to generate the configuration file. It's straigthforeward and
  easy. We enter the server, port, and Service_name and it works.

  But for a guard database, there are two servers and I seem to be unable to set it in the right way. After doing some research I came across the parameter apex.db.customURL which should solve the problem.

  I removed the references to the server, port, and Service_name and put the key in.

  Keep the references the server name, port and service. No need to delete.

  The result were errors of connection due to some incorrect port settings.

  SEVERE: The pool named: apex is not properly configured, error: IO error: format invalid number for the port number

  oracle.dbtools.common.jdbc.ConnectionPoolException: the pool named: apex is not properly configured, error: IO error: format invalid number for the port number

  at oracle.dbtools.common.jdbc.ConnectionPoolException.badConfiguration(ConnectionPoolException.java:65)

  What Miss me?

  You must create two entries in the configuration file "defaults.xml" for your ADR (formerly APEX Listener).

  One for db.connectionType and, secondly, for db.customURL, for example:

  customurl
  jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=
  (ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(HOST=DB-ENDUR)(Port = 1520))
  (ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(HOST=DB-ENDURK)(PORT = 1521))
  (LOAD_BALANCE=off)(FAILOVER=on))(CONNECT_DATA=(SERVICE_NAME=ENDUR_PROD.VERBUND.CO.AT)))
  

  Reference: http://docs.oracle.com/cd/E56351_01/doc.30/e56293/config_file.htm#AELIG7204

  NOTE: After you change the configuration file, don't forget to restart independent ADR / Java EE application server support if ADR is deployed on one.

  Also check if your URL for a JDBC connection is working properly and if there are any questions, you can turn on debugging for ADR:

  Reference:

  • http://docs.Oracle.com/CD/E56351_01/doc.30/e56293/trouble.htm#AELIG7206
  • http://docs.Oracle.com/CD/E56351_01/doc.30/e56293/trouble.htm#AELIG7207

  Directed by Tony, you should post the ADR related questions to the appropriate forum. Reference: ADR, SODA & JSON in the database

  You can also move this thread on the forum of the ADR.

  Kind regards

  Kiran

• Data Guard and Flashback

  I will be an active data guard with a primary instance and a secondary instance. I'm in the environment no CARS. My primary databases and Eve will be the flashback database on. I duration of blowback for one day, i.e., I should be able to flashback to the top of any time in the last 24 hours.

  When I do the RMAN backup on primary and remove the archiving log by using the rman command, RMA will not remove newspapers to archive that will be required for the flashback database (24 hours a day)?

  When I am applying newspapers archived on the backup site, I want to remove the archived logs that have been applied, but not required for the flashback database. How can I determine that? In the worst case scenario, I can always keep archived logs from 1 day to wait?

  1. Thank you.

  You need not remove the flashback logs.  Oracle automatically manages the removal of flashback logs.

  Configure retention policy to remove the archive logs more at some point.

  Configure archivelog deletion policy to manage the removal of logs that have been applied to the wait.

  for example:

  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;

  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;

  In the worst case if you discover you need archivelogs that have been removed from the drive, then you can restore them because they have already been backed up by RMAN.

• Archive Data Guard and Flashback

  Hello
  
  I have a DB 11.2.0.1 with a database of pending.
  If I put a few tables to be in the flashback data archive, (support for FDA tables) will be copied to a db as well sleep?
  
  concerning

  Hello;

  I hesitate to answer because you don't seem to close your old questions or give points to those who help. But I also believe in giving the benefit of the doubt.

  If the FIU is configured on your watch then the answer is Yes.

  While this is not a requirement to use I would always use FRA with Data Guard.

  db_recovery_file_dest = ' / u01/app/oracle/flash_recovery_area.

  The following are some sample parameter values that might be used to configure a physical standby database to archive its standby redo log to the fast recovery area:
  
  LOG_ARCHIVE_DEST_2 = 'LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(STANDBY_LOGFILE,STANDBY_ROLE)' LOG_ARCHIVE_DEST_STATE_2=ENABLE
  

  Source

  DataGuard of Concepts and Administration 11g Release 2 (11.2) E10700-02

  With RMAN efficiently in an environment of Dataguard. [848716.1 ID]

  Best regards

  mseberg

  Published by: mseberg on December 1, 2012 13:53

• Removal of RMAN, Data Guard, and Archives journal

  Our DG Environment running Oracle 11 g R2
  We have a 3 node DG Environment with
  A primary being
  B and C being Active Data Guard Standby
  Backups are taken out of B and go directly to tape.
  Standby Redo Logs and fast recovery area are used
  
  
  
  Holding the recommendation of "Using Recovery Manager with Oracle Data Guard in Oracle Database 10g"
  RMAN primary control ('A')
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED PENDING
  
  RMAN standby ("B") where the backup is performed
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY
  
  RMAN set the other Standby ("C")
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED PENDING
  
  How can we know what newspaper Archives are eligible to be removed from 'A' and 'C '?
  When remove it takes place?
  How can say us when archiving logs are deleted from the 'A' and 'C '?

  Dear user10260925,

  The documentation that you read is reliable but not enough.

  The Oracle can handle the archivelog directory and know that you are eligible for deletion. Stuff you posted here was derived from the books online and is supported and can be used when the Oracle knows and manages the archivelogs. This is simply called the flash recovery area. Please read the FRA at this very moment.

  Under the personal component normal circumstances in the industry use a few scripts to achieve on backup archivelog deletion.

  Here's a useful example to you;

  # Remove old archivelogs
  ######################################
  00,30 * * * * /home/oracle/scripts/delete_applied_redo_logs_OPTSTBY.sh
  ######################################
  
  vals3:/home/oracle#cat /home/oracle/scripts/delete_applied_redo_logs_OPTSTBY.sh
  export ORACLE_SID=optstby
  export ORACLE_HOME=/oracle/product/10.2.0/db_1
  cd /db/optima/archive/OPTPROD/archivelog
  
  /oracle/product/10.2.0/db_1/bin/sqlplus "/ as sysdba" @delete_applied_redo_logs.sql
  grep arc delete_applied_redo_logs.lst > delete_applied_redo_logs_1.sh
  chmod 755 delete_applied_redo_logs_1.sh
  sh delete_applied_redo_logs_1.sh
  rm delete_applied_redo_logs_1.sh
  rm delete_applied_redo_logs.lst
  

  vals3:/home/oracle#cd /db/optima/archive/OPTPROD/archivelog
  vals3:/db/optima/archive/OPTPROD/archivelog#cat delete_applied_redo_logs.sql
  set echo off
  set heading off
  spool /db/optima/archive/OPTPROD/archivelog/delete_applied_redo_logs.lst
  select 'rm -f ' || name from v$archived_log where applied = 'YES';
  spool off
  exit
  vals3:/db/optima/archive/OPTPROD/archivelog#
  

  Hope that helps.

  Ogan

• Data Guard environment connection

  How should I make a data hold on patch?
  Our environment is RHEL 5.4, NON-RAC physical 1 and 2 Standby Active.
  
  I think since we have no quarterly maintenance windows for:
  (1) arrest Data Guard
  (2) patch and confirm each relevant databases
  (3) restart data guard
  
  
  Anyone can share there thoughts and experiences?
  
  Thanks in advance.

  You can find the exact in measurements
  How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody [278641.1 ID]

• Active Data Guard and Undo and ora-01555

  Hello
  
  We have a 11.1.0.7 two nodes primary CARS with a physical standby single instance Active Data Guard. When you run an export datapump since the day before, we get an ORA-01555 while the undo_retention is well beyond the duration of watering for export.
  
  I'm looking to better understand the cancellation as part of Active Data Guard. Is there any dependency for cancellation between the primary (s) and the day before? Are the settings Cancel (undo_retention, tablespace... undo size) on the primary and independent intelligence on the other?
  
  Thank you.

  The wait is a physical expectation. An exact copy of the primary. The cancellation to sleep is controlled by it again come from the primary. When the cancellation is replaced in the primary, he gets crushed to the standby regardless of what it executes. You cannot cancel maintained around more on the eve, it is a replica of the primary.

  Increasing the undo tablespace and the primary undo_retention allows more Cancel to keep both primary and standby, but Eve is always controlled by the direction of the primary to cancel it. Of course, you must change the setting to sleep too so that everything is the same when you made the day before to a primary database.

  I hope this helps.

  Larry

• Data Guard and EHCC on Exadata - does work?

  Exadata Hybrid columnar Compression (OHCC) works when a database is in mode "force logging?
  
  I fear that it may not work because OHCC works only for inserts in direct mode, which means me no logging.
  
  We are in the process of purchasing a vault Exadata, a second target Data Guard.
  
  V11.2 documentation Data Guard is specifically stated that Data Guard doesn't support hybrid columnar compression, but I don't know what are the implications of this.
  
  I expect to have to solve the primary database Machine for 'forcing logging' Data Guard will be used.

  DataGuard physical or logical?

  Oracle fully supports data Guard physical standby and hybrid columnar Compression on Exadata.

  Direct support issues that may exist with Data Guard logic and therefore, at least at the present time, logic is not supported.

  The above is to the best of my knowledge that I don't have access to the documentation of the Exadata. But was certainly true of my
  last experience of HCC. Your Oracle sales representative should be able to provide the definitive answer quickly and I would be grateful
  post you here.

• Data Guard - Grid Control - Standby database

  Heys,
  
  now I have to Clusters RAC. The next step will be to set up a database on hold to prepare a graceful failover.
  
  But what are the next steps?
  I currently install GridControl on a separate host with the option: company Manager10g grid control by using an existing database
  The installation still work...
  
  What are the steps? All documentation? Tutorials?
  I need to install agents on each client in the cluster?
  As for name resolution?
  Any configuration of the necessary listener?
  The configuration is made via command line for the Data Guard?
  
  
  
  Christian

  Hello Christian,.

  Maybe you should have Data Guard documentation. Here's the URL:

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14239/TOC.htm

  There is also a section RAC.

  Greetings from Switzerland,
  David

  OCP 9i / 10g / 11g
  http://www.oratoolkit.ch/knowledge/HOWTO/installation/OTN.php

• Restore the size of the log in Data Guard configurations

  DB version: 11.2
  Platform: Solaris 10
  
  We have currently a DB production which is not Dataguard.It has a load of joint working: some processing OLTP and batch.
  Its size of redo log is * 100 * MB.
  
  We will create a database with the requirement very similair but this DB will have primary standby (Data guard) and real time applies.
  
  To adapt to the requirements of dataguard, we should reduce the size of the recovery online newspapers? That is to say. Transport of small pieces of roll forward is better than carrying more. Right?

  Hello;

  If you use "real-time applies" the key is not the size so that the standby Redo Logs.

  In most cases, 100 MB is fine. Newspapers to sleep again must be the same size that it again.

  With 'real time applies' SRL act as a buffer.

  Unless you have a real problem with the size of do it again I would not change it.

  An excellent source of information on this is 'Restore the Services of Transport' in ' Data Guard Concepts and Administration 11 g Release 2 (11.2) "E10700-02".

  If you believe that your logs are too big departure "Troubleshooting performance problems with the database and base/MFG MRP [ID 100964.1]"

  Best regards

  mseberg

  Published by: mseberg on May 31, 2012 11:33

• Request to license Oracle Data Guard

  Nice day! at all. I don't know if this is already asked before, but I would like to ask for your help regarding my inquiry.
  
  We have an Oracle 10 g Database EE here in our company which is established in a RAC (2 nodes and 1 SAN). Of course, that are already approved.
  
  We intend to implement the Oracle Data Guard.
  
  Of course the Oracle Data Guard will run voluntarily for a disaster recovery, in the case that our CARS (especially the SAN) will crash, we would like to have a stand physically separated by our primary database server (stand by server is completely separate to our existing main server) server.
  
  My questions are:
  
  1. don't we have to take advantage of a new license for custody of data?
  2. what other license should we acquire for the above settings?
  3. we would have a separate Installation of Oracle database on the standby server?
  4. If we have a named user license 150 on the primary database should purchase us a new license user named 150 for the confirmation Server?
  5. are there other things I have to consider in what concerns the granting of licenses for our project?

  OK, here's how my speailist license put, Data Guard as a product is free, but is not the database instance. A physical standby is a database, it must be so licensed, however the expert of the license indicates that licenses you buy for the execution of the physical standby can be ubtained at a substantially reduced rate as they would be called limited licenses. It's not data hold is the cost, it is the cost of an another database on another machine. According to you, current license, you can be covered however, you may not. Everything I say is call a specialist to license Oracle Metalink support, call the guy or gal who has sold you Oracle licenses or appeal and certified Oracle partner/reseller can help you with a specialist of the license and have a licensing discussion/examination before implementation. Oracle support is not those who understand the licenses and how this all works, he did this and like them, always thought that data guard and physical databases Eve were free and included and recently corrected, hard enough I might add.

• Active Data Guard

  Hello
  Can we create an Active Data Guard in Oracle 10 g R2 release?
  
  
  Vinita

  Hi Vinita;

  Can we create an Active Data Guard in Oracle 10 g R2 release?

  You can not, you need to be level 11g. Please see:
  http://www.databasejournal.com/features/Oracle/article.php/3834931/using-Oracle-11gs-Active-Data-Guard-and-snapshot-standby-features.htm
  http://en.Wikipedia.org/wiki/Oracle_Data_Guard

  Respect of
  HELIOS

• The views using materialized for data warehousing and reporting

  Hello
  
  I would better understand the materialized views in Oracle in particular the use of the option: REFRESH QUICKLY ON COMMIT. The oracle database, we care is a PLM application and any of the tables to apply using the primary key constraints. Instead, the application uses a separate schema to store the key values for each object/save in the database. I would use Materialized View to the creation of a data warehouse smart to transfer only the lines that have updated since the last refresh of the warehouse. My understanding of the materialized views you can't define a until and unless you have a primary key constraint. It's fine and understandable.
  
  Can we have an oracle separate sid something like WSHD - data warehouse and using the database between the main site links - site WSHD always transfer lines that have changed since the last refresh with REFRESH QUICKLY ON COMMIT option? (Note: this is taking into account the fact that a database primary key constraints defined on the paintings of masters.)
  
  I guess you have to install MV NEWSPAPER tables on the main table and then create a materialized using option QUICKLY ON COMMIT REFRESH view?
  
  Am I wrong?
  
  Will there be another option for the transfer of the lines of main tables in the data warehouse in Oracle?
  
  Thank you very much.
  
  See you soon.
  Rohan
  
  Published by: José on 10/01/2009 00:21

  1. you can't define a materialized as ON COMMIT REFRESH in a separate database view. It must be in the database even if it's to refresh commit it.
  See http://hemantoracledba.blogspot.com/2008/06/mvs-with-refresh-on-commit-cannot-be.html

  2. you don't have to have a primary key to set a MV. You can set a MV WITH ROWID (except if you re-create the source table, you need to do a refresh of the MV because ROWID changes).
  See http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6002.htm#i2063793

  Hemant K Collette