Data hold is supported on zLinux mainframe? Any limitation?

Similar Questions

• I can get the data of a hygrometer using the RS232 port with the following T75.2F:H17.0% using a RS232 data logger format. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  The setting below causes the error. Change for the second selection, output values of all channels.

  

• Is there currently an end date for CS6 support?

  Is there currently an end date for CS6 support? Is there currently an end date for CS6 support?

  A link to buy the CS6 via phone http://www.adobe.com/products/cs6.html read the part on the CS6 is more updated

• I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  Did you check help-> updates to see if they are available? You probably don't have the latest version of Camera Raw that was compatible with Photoshop elements 12 installed.

• Is Microsoft Failover Cluster ESXi 4.1 Shared Disk of NFS data store, it supported?

  Is Microsoft Failover Cluster ESXi 4.1 Shared Disk of NFS data store, it supported?

  We have a request from MS Failover Cluster configuration on Windows 2008 R2 2 guests with a storage shared for a web application. However, there is no VMFS storage of data or the ability of the CF to presending RDM. So, I created the disks shared on a NFS datastore using option "Setup for Failover Clustering and Microsoft Cluster Service" and have added the cluster disk and tested successful failover.

  But the MS cluster validation control cancelled storage and I want to know if that configuration is not taken because of supported.

  A notice would be useful.

  We are also working on setting up a cluster of ESXi for iSCSI storage, which can be leveraed for this purpose.

  Shyam-

  Its not supported.

  4.1, your only options supported are:

  • CF storage with pRDMs
  • iSCSI storage with initiators guest.

• Implementation of data hold

  I'm trying to implement data hold in the test configuration.
  
  name of the primary database is secondary test & db name is testdr... This is a primary database init.ora file...
  
  test.__db_cache_size = 3019898880
  test.__java_pool_size = 67108864
  test.__large_pool_size = 67108864
  test.__oracle_base='c:\app\administrator'#ORACLE_BASE the value of the environment
  test.__pga_aggregate_target = 2751463424
  test.__sga_target = 4093640704
  test.__shared_io_pool_size = 0
  test.__shared_pool_size = 872415232
  test.__streams_pool_size = 0
  * .audit_file_dest = "c:\app\administrator\admin\test\adump".
  * .audit_trail = "db".
  * full = '11.2.0.0.0'
  *.control_files='c:\app\administrator\oradata\test\control01.ctl','C:\app\Administrator\flash_recovery_area\test\control02.CTL '
  * .db_block_size = 8192
  * .db_domain = "
  * .db_name = 'test '.
  * .db_recovery_file_dest_size = 2g
  * .db_recovery_file_dest = "c:\app\administrator\flash_recovery_area".
  * .db_unique_name = 'test '.
  db_file_name_convert = "c:\app\Administrator\oradata\testdr\", "c:\app\Administrator\oradata\test\".
  log_file_name_convert = "c:\app\administrator\oradata\testdr\", "c:\app\administrator\oradata\test\".
  * .diagnostic_dest = "c:\app\administrator".
  *. Dispatchers ='(Protocol=TCP) (SERVICE = TESTXDB)"
  * .fal_client = 'TEST '.
  * .fal_server = "TESTDR.
  *. Log_archive_dest_1 = 'LOCATION = c:\app\administrator\oradata\backup VALID_FOR =(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME = test'
  * .log_archive_dest_2 = "SERVICE = ASYNC VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME = testdr TESTDR'"
  * .log_archive_dest_state_1 = 'ENABLE '.
  * .log_archive_dest_state_2 = 'REPORTER '.
  *.log_archive_format='ARC%S_%R.%T'
  * .memory_target = 6794772480
  * .open_cursors = 300
  * runoff = 150
  * .remote_login_passwordfile = "EXCLUSIVE."
  * .service_names = 'TEST '.
  * .standby_file_management = "AUTO".
  * .undo_tablespace = "UNDOTBS1.
  
  
  
  and here's a database standy init.ora file
  
  
  testdr.__db_cache_size = 3019898880
  testdr.__java_pool_size = 67108864
  testdr.__large_pool_size = 67108864
  testdr.__oracle_base='c:\app\administrator'#ORACLE_BASE the value of the environment
  testdr.__pga_aggregate_target = 2751463424
  testdr.__sga_target = 4093640704
  testdr.__shared_io_pool_size = 0
  testdr.__shared_pool_size = 872415232
  testdr.__streams_pool_size = 0
  * .audit_file_dest = "c:\app\administrator\admin\testdr\adump".
  * .audit_trail = "db".
  * full = '11.2.0.0.0'
  *.control_files='c:\app\administrator\oradata\testdr\control01.ctl','C:\app\Administrator\flash_recovery_area\testdr\control02.CTL '
  * .db_block_size = 8192
  * .db_domain = "
  * .db_name = "testdr.
  * .db_recovery_file_dest_size = 2g
  * .db_recovery_file_dest = "c:\app\administrator\flash_recovery_area".
  * .db_unique_name = "testdr.
  db_file_name_convert = "c:\app\Administrator\oradata\test\", "c:\app\Administrator\oradata\testdr\".
  log_file_name_convert = "c:\app\administrator\oradata\test\", "c:\app\administrator\oradata\testdr\".
  * .diagnostic_dest = "c:\app\administrator".
  *. Dispatchers ='(Protocol=TCP) (SERVICE = TESTXDB)"
  * .fal_client = "TESTDR.
  * .fal_server = 'TEST '.
  *. Log_archive_dest_1 = 'LOCATION = c:\app\administrator\oradata\backup VALID_FOR =(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME = testdr'
  * .log_archive_dest_2 = "SERVICE = ASYNC VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME test = TEST'"
  * .log_archive_dest_state_1 = 'ENABLE '.
  * .log_archive_dest_state_2 = 'ENABLE '.
  *.log_archive_format='ARC%S_%R.%T'
  * .memory_target = 6794772480
  * .open_cursors = 300
  * runoff = 150
  * .remote_login_passwordfile = "EXCLUSIVE."
  * .service_names = 'TEST '.
  * .standby_file_management = "AUTO".
  * .undo_tablespace = "UNDOTBS1.

  research your invalid entry in tnsnames.ora.

  Try this
  tnsping test

• Date-time info - when the last time any new record is inserted in a table

  Hi all
  
  is it possible to get information from Date and time - when the last time any new record is inserted in a table without triggers...?
  
  Thanks in advance.
  / Shakeel

  Hello

  user11981535 wrote:
  is it possible to get information from Date and time - when the last time any new record is inserted in a table without triggers...?

  Insert only, I don't think it's possible.
  But you can ora_rowscn pseudo-column and scn_to_timestamp the user function to get the time when the table was modified last:

  Scott@my11g SQL>select scn_to_timestamp(max(ora_rowscn)) lstmod from t1;
  
  LSTMOD
  ---------------------------------------------------------------------------
  13-DEC-10 05.05.22.000000000 PM
  
  Scott@my11g SQL>update t1 set val='stuff' where id=1;
  
  1 row updated.
  
  Scott@my11g SQL>commit;
  
  Commit complete.
  
  Scott@my11g SQL>select scn_to_timestamp(max(ora_rowscn)) lstmod from t1;
  
  LSTMOD
  ---------------------------------------------------------------------------
  13-DEC-10 05.07.19.000000000 PM
  

  But I'm not wheither it is reliable to be used on the production database.

• connection problem of data with the support of mobistar (Belgium)

  WiFi works. Data connection isn't.

  The signal 'H' or 'E' is highlighted. I tried with the parameters of android and iphone Mobistar Belgium Web site and with all types of authentication. But it is impossible to connect.

  I will try with a sim card from another carrier and let you know.

  In the meantime, does anyone know if there are any specific APN settings for mobistar.be?

  Hi yellowtrolley,

  Thank you for reporting this issue. Please try the following to the APN settings I found on this site nd make sure your specific device supports the following frequencies:

  • GSM 900/1800 (2G GSM) net
  • W CDMA 2100 (3 G UMTS)

  The APN settings:

  • username: mobistar
  • password: mobistar
  • Name of the APN: web.pro.be

  You can also try this page if you need more specific parameters.

  Please let us know if this solves your problem, or if you have other questions about your Firefox OS device.

  Thank you!! =)

  -Ralph

• Loud music on hold telephone support

  When I call technical support on Apple music on hold that I find difficult to deal with. I don't seem to find a way to lower and I refused my phone as low as it goes. I wear a hearing aid and the reverbates high decibels in my ear and it is difficult to hear the representative of tech because my ear was dynamited.  Someone help? It's not the music I'd choose, but I can deal with that... It is the strong music alters my hearing when wearing a hearing aid.

  Apple... any suggestions?

  Help someone else has this problem?

  I don't see that Apple that creates exceptional technological products cannot understand this. !

  Hello

  I'm not Apple. I'm another user here on the forums. I did a little research and found this link for "Apple support for hard of hearing" click on this link and select "Get Started" this will bring you to two or three other screens where you describe simply or selected the closest match possible to describe your problem, it if does not exist and you can't see your problem, simply click on 'subject unregistered. , with a few words, describe the problem and click on 'ok' or 'next', then you should be able to chat with someone online, or set a reminder if you do not have to wait pending: https://www.apple.com/support/accessibility/contact/

  Cat guys are very good. Well the phone, people are too but I want to say is that if you want things to be silent rather than possible decibel telephone tips, then the cat will get my vote. They are generally available 24/7.

  Apple makes great products, which can generate a high demand for the service and support. Surely, it can be difficult to navigate through the jungle of possible solutions here on the forums.

  I hope this helps.

  Best

• Support for Vista? Any suspicion of another service pack to extend its life?

  I read theis page http://support.microsoft.com/gp/lifeselectindex.

  Y at - it no suspicion of another service pack for Vista Home Premium 32-bit or 64-bit extended life cycle?

  Why the life of XP would extend beyond Vista? I guess that last Vista a little more or less at the same time would end.

  Hello

  you need to ask these questions to Microsoft

  This is not Microsoft

  These are public Forums, hosted by Microsoft

  Care about the lifecycle of Windows

  http://Windows.Microsoft.com/en-us/Windows/products/lifecycle

  and Vista end of support is a later date with XP, not the other way around

  Desktop operating systems	Latest service pack	End of standard support	End of extended support
  Windows XP	Service Pack 3	April 14, 2009	April 8, 2014
  Windows Vista	Service Pack 2	April 10, 2012	11 April 2017

• Column data type not supported

  Hello

  I have Oracle 12 c installed in my system. I created an SP that returns a Table when I try to run it in SQL Developer, it gives me the correct results, but when I call it my DOTNET application it gives me the error-'datatype of the column unsupported. I'm trying to fill a dataset using a data adapter. To check I commented all the code in the procedure and returned the table using the code below.

  Declare
  rc sys_refcursor;
  Begin
         OPEN rc FOR SELECT 'Sayam' AS "Error" FROM dual;
         SYS.DBMS_SQL.RETURN_RESULT (rc, TRUE) ;
  END;
  

  But the problem was still same. This is the track of the same thing.

  Oracle.ManagedDataAccess.Client.OracleException took

  HResult =-1450

  Message = data type of column not supported

  Source = Oracle Data Provider for .NET, pilot managed

  ErrorCode =-1450

  DataSource =""

  Number =-1450

  Procedure =""

  StackTrace:

  at Oracle.ManagedDataAccess.Client.OracleParameter.PreBind (OracleConnectionImpl connImpl, ColumnDescribeInfo cachedParamMetadata, Boolean, bMetadataModified, Int32 arrayBindCount, ColumnDescribeInfo, paramMetaData, object & paramValue, Boolean isEFSelectStatement)

  at OracleInternal.ServiceObjects.OracleCommandImpl.InitializeParamInfo (ICollection paramColl, OracleConnectionImpl connectionImpl, ColumnDescribeInfo cachedParamMetadata [], Boolean & bMetadataModified, isEFSelectStatement Boolean, MarshalBindParameterValueHelper & marshalBindValuesHelper)

  to OracleInternal.ServiceObjects.OracleCommandImpl.ProcessParameters (OracleParameterCollection paramColl, OracleConnectionImpl connectionImpl, ColumnDescribeInfo cachedParamMetadata [], Boolean, bBindMetadataModified, isEFSelectStatement Boolean, MarshalBindParameterValueHelper & marshalBindValuesHelper, Boolean & bAllInputBinds)

  at OracleInternal.ServiceObjects.OracleCommandImpl.ExecuteReader (String commandText, OracleParameterCollection, CommandType commandType, OracleConnectionImpl connectionImpl, OracleDataReaderImpl paramColl & rdrImpl, longFetchSize of Int32, Int64 clientInitialLOBFS, OracleDependencyImpl orclDependencyImpl, scnForExecution of Int64 [], Int64 [] scnFromExecution, OracleParameterCollection, internalInitialLOBFS, OracleException & exceptionForArrayBindDML, Boolean isDescribeOnly, Boolean isFromEF, Boolean bBindParamPresent, Int64 & bindByPositionParamColl)

  at Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader (Boolean requery, fillRequest Boolean, CommandBehavior behavior)

  to Oracle.ManagedDataAccess.Client.OracleDataAdapter.Fill (DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, command IDbCommand, CommandBehavior behavior)

  at System.Data.Common.DbDataAdapter.Fill (DataSet dataSet)

  at DataAccessLayer.DataAccessService.OracleGetData_Load (String SPName, XElement QueryParam, Exception & e, Boolean bFlag) in d:\Sayam\April\Multiplay\DataAccessLayer\DataAccessLayer\DAS.cs:line 187

  Please let me know if I need to change anywhere.

  Thank you

  Siradji

  Hello

  I did a search for two days and found the link below to set up the DLL

  http://www.Oracle.com/technetwork/database/Windows/downloads/index-090165.html

  It worked well when installing using CMD

  Thank you.

• Transparent data encryption are supported with Oracle Advanced Replication?

  Which version of DB, TDE supported with Oracle Advanced Replication?

  user939188 wrote:
  Which version of DB, TDE supported with Oracle Advanced Replication?

  "Materialized views do not support columns that have been encrypted by using transparent data encryption."

  Source - http://oracle.su/docs/11g/server.112/e10706/repmview.htm

• Cannot create new Data Source - Oracle ODBC doesn't show any system DSN

  On Windows 7 x 64, installed Oracle 10 g using ODBC to connect to the Oracle database, but I am not able to create a new data source as Oracle ODBC doesn't show... illustrious system DSN only SQL server etc etc...

  If you have installed the 32-bit database Client, try the 32-bit ODBC administration tool: C:\Windows\SysWOW64\odbcad32.exe

  Note that 10.2.0.5 is the oldest version of "10g" supported on Windows 7.
  http://download.Oracle.com/docs/CD/B19306_01/Relnotes.102/b15680/TOC.htm#BABEBBJF

  As an alternative, try the customer Instant 11.2.
  For 32-bit applications: http://www.oracle.com/technetwork/topics/winsoft-085727.html
  64-bit / x 64: http://www.oracle.com/technetwork/topics/winx64soft-089540.html

• "of data type not supported" in the interactive report

  Hello
  
  I'm trying to download a file from a link to an itneractive report.
  
  In the section "attributes of report" interactive column, I defined in the section "links" in a column of the 'target', 'URL', and the URL like this:
  

  DOWNLOAD:CONVENTIONS:#FILE_BLOB#:#ID#::#MIME_TYPE#:#FICHIERS#:#LAST_UPDATE#::attachment:Conv

  When I run the interactive report, the link view this:
  Download: CONVENTIONS: [type]:188:C22.pdf:attachment:Conv of data not supported
  
  The table "CONVENTIONS" is defined as follows:
  ......
  ACTIVATE THE 'ID' NUMBER NOT NULL,
  VARCHAR2 (2048 BYTE) "FILES."
  'FILE_BLOB' BLOB,
  "LAST_UPDATE" DATE,
  'MIME_TYPE' VARCHAR2 (255 BYTE)
  
  Where is my mistake?
  
  Thanks for your help!
  
  Christian

  Hello Christina,

  Sorry Wizard, you need to use is the "form > form on Table with Report", because the normal create assistant interactive report allows you to enter a query.
  Once you have completed the wizard, take a look at the generated SQL statement (must use the dbms_lob.getlength) and the value in "number Format / Date" for this column.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

• Problem with data hold creating a Physical Standby Database turorial

  There is a tutorial for creating a Data Guard Physical Standby Database:
  http://www.Oracle.com/technology/OBE/11gr1_db/HA/DataGuard/physstby/physstdby.htm
  
  I tried to install it on two servers. One for a primary database (deuxieme for the physical standby.
  I have the error on creating C. the database of watch on the #6 action network:
  
  «On the rescue system, set the ORACLE_SID to your < SID physical standby > environment variable (i.e. orclsby1) and start the instance in NOMOUNT mode with the text initialization parameter file.»
  
  When I try to connect to the instance that is idle, there is an error pops up:
  
  C:\ > sqlplus / as sysdba
  
  SQL * more: version 11.1.0.7.0 - Production Thursday, May 21, 16:28:10 2009
  
  Copyright (c) 1982, 2008, Oracle. All rights reserved.
  
  ERROR:
  ORA-12560: TNS:protocol adapter error
  
  I ' v checked listener, and it is managed. There is no database service because there is still no database.
  
  The question is did some data installed a guard configuration using this tutorial? Are there errors in there? What should I do to complete the installation?

  On Windhose for any service must have been created using the oradim command.
  Oracle tutorials are usually centered on Unix, because Windhose is an odd man out, so they do not discuss.
  "Please do the needful" and create the service before the beginning of the instance in nomount mode

  Tip: oradim is documented and has a help = clause of y.

  IIRC there is an option in control database (in the part of the interview) that automates everything.

  ----------------
  Sybrand Bakker
  Senior Oracle DBA

  Experts: those who read documentation