data in the chart values

Similar Questions

• ORA-03297: file contains data beyond the requested value of RESIZING

  Hi all
  I am trying to increase the size of my space of system tables. The tablespace contains a data size 900MB file and it may increase to 2 GB.
  I would like to change this to autoextend I'll operate on the database csscan.
  When to change the autoextend and unlimited file I get: ORA-03297: file contains data beyond the requested value of RESIZING
  
  I also tried to increase the data file of 4 GB, but still the same. I see that there is more then enough space on the file system.
  Need help.
  Oracle Enterprise edt 10.2.0.5
  Concerning
  933746

  The first statement is that originally the problem - you try to shrink the file, develops it not.

  The autoextend (second statement) should be fine as is.

• problems with the date in the chart in the first instance

  Hello

  I have a date selection field (P2_START_DT), which has a default value in a table

  Here's the code I used to set the default (thanks again to the expert for assistance)

  Start

  Select max (REC_DATE) dt in: P2_START_DT

  from TABLE_A;

  return: P2_START_DT;

  end;

  on the same page, I have a report (Type: SQL query) and a chart that takes P2_DATE as a parameter

  This is a sample report SQL condition

  ...

  where

  RECORD_DATE >: P2_START_DT

  This is a condition of samlpe SQL used for the graphics

  ...

  where

  RECORD_DATE >: P2_START_DT

  condition is about the same for both

  My problem is that when the page is loaded for the first time, the P2_DATE field and the report shows good data but my chart shows nothing.

  to test, I added a button to submit the page.

  When I click on the button both my chart and the report shows the right data... suggesting that for some reason any graph is not picking up the default value for P2_START_DT when the page is first loaded

  Please notify.

  The default value for your item is not saved in session state until you offer page.  When your chart is rendered the first time the value of your object in session state (which makes graphic references) is not defined.

  Create a calculation for your section header to set the value of the element in the session before the rendering of the graphics state.

  Calculate the point: P2_START_DT

  Calculation Point: before header

  Type of calculation: (single return value) SQL query

  Calculation:

  select max(REC_DATE) dt
  from TABLE_A;
  

  Condition Type: point value / Expression 1 a NULL column

  Expression 1: P2_START_DT

• You cannot change the chart value axis when there are several types of graphics in a single diagram

  Illustrator can do graphics with bars and lines / columns, for example in the docs:

  

  http://help.Adobe.com/en_US/Illustrator/CS/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html

  However, when I create a chart like this, I seem to lose the ability to manually set the y-axis using 'override calculated values.

  To reproduce this problem:

  1. Create a chart as in the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers as well as the lines align perfectly - have a go until just less than 20, a up to a little less than 250, therefore it do not markers and the number of divisions on each side.
  2. Try to make the markers and numbers of divisions to the height, so in fact, the side that is going up 20 going up to 25 and has the same number of divisions on the other side.

  Everything I have tried does not work:

  • If I select the entire chart and go to the "Chart Type", I can not set the options for the value axis. In earlier versions, it's gray, in CS6 I can access, but clicking on 'OK' does nothing.
  • If I select the entire chart and chose the type of a chart, I can set options for the axis value, but that the selected chart type, and then applies the entire table.
  • If I use the direct Selection tool to select one of the series and open the "Chart Type" options, changing the options of the y-axis has no effect
  • If I use the direct Selection tool to select all series that share an axis and open the "Chart Type" options, changing the options of the y-axis always has no effect
  • If I use the direct Selection tool to select the Group of ticks axis itself, or the axis line and groups of ticks axis themselves, of axis labels, axis and graduations of the axis line, or axis labels, axis line, graduations of the axis and series of related data, etc., by changing the options of the axis also has no effect

  It seems that this feature is broken and it seems that the example in the manual has been carefully chosen to use a rare combination of numbers where it would actually look right.

  I thought about it. Like everything to do with the horrible ancient neglected graphic Illustrator tool, it is ridiculously clumsy and involves the caution around what is shamefully bad programming for a professional expensive product.

  It is timing - to do things in a sequence of rigid counterintuitive that seems not to work then meets at the end:

  1. Create the chart but, for now, keep all the same chart type. If you've already set to have different graphics types, put the same thing for now.
  2. Select the entire chart and in the main window of Chart Types, set the value to "Both sides" axis
  3. In the drop-down menu, there should be a left and right axis (or top and bottom...). Set the parameters of the value axis for these now. It will look like it does for a single axis, because it will not change the other axis - naked with her...
  4. Select the data series you want to use the other axis using group selection. Go to graph Type and the value of the y-axis to the other and set the chart type that you want. All of a sudden all be put in place.
  5. If you need to change the settings for the value axis, select the entire chart, set the whole chart type to a chart, change the appropriate value axis by choosing it from the menu drop down and the re - apply types of graph as above.

  (the bug is - it should not necessary to set the graphic object to only have only one chart of type in order to access the axis options of value for two different y-axis)

• It is better to define a waveform properties of scale before or after sending new data to the chart?

  Hi, I wonder what is the best time to update the properties of the graphic scale waveform.

  I'm sampling data every 15 minutes for 192 samples, or 48 hours.  I want to draw these samples with x in absolute scale so the scale maximum x is time and x minimum scale at the time mode is x max in less than 48 hours (172800 seconds).  I want also to intermediate-scale markers 6 hours apart and to be multiples of 6 hours.  for example at 06:00, 12:00, 18:00.  It works by using nodes of property but sometimes intermediate markers are on the hour 6 multiple and sometimes they are at 6 hours after the scale min marker.  for example, 09:15, 15:15, 21:15.  Is there a way to ensure that the intermediate markers are on the hour 6 multiples?

  Thank you

  Neville

  Neville,

  I don't think there is a function of the order of execution by using nodes of property information across your graph. If you are concerned about the speed of your VI, I would recommend writing to the property node before update you the chart. I believe that this will ensure that the chart will update only once: when the new data is sent to the curve, as opposed to the update with the new data, then with the new scale.

• Save the data in the chart to the file constantly

  I'm analog data Aqcuerir of USB 6000 data acquisition and display on the chart. I have to save all the data in a file as well (text or excel... or at least a file). It is easy to configure so that the data is saved after the stop button was so press until the end of the race. However, I need to write to a file when running because he could be running for days. In such a period extended, the buffer is an overload, and the data is lost.

  Could you please indicate some kind of how to write data to a file constantly during measurement, wthout record in the buffer?

  
  

• Need for a versatile to pass data to the chart

  Hello

  I have a sub - vi that performs data analyses. I pulled out the results through a def type. I want that this type def to include data necessary to plot the results on a XY Chart.

  My problem is that the data will sometimes contain only 1 and sometimes multiple data series dear. or sometimes the output should be a cluster of two 1 d-tables, sometimes it must be an array of clusters. Is there a good way to do this?

  

  vs

  

  udka wrote:

  You can try using for loop with indexing enabled so you will come to know how much coulumns you have during execution and clusters and then indexing on so that you always have table of clusters.

  You are on the right track.  Just need a little before the loop to transpose the table (to properly make the indexing job) and remove the data from the x-axis.

  

• Pump diagram remapping of data with the default value of sequence (12 c feature)

  Hello

  in the 12 c Oracle database there is a new feature that allows you to set default values directly from a sequence:

  http://docs.Oracle.com/database/121/NEWFT/chapter12101.htm#NEWFT155

  This helps us to save the use of triggers to get the next value of an ID column for example the DDL of such a table might look something like this:

  CREATE TABLE "FOO"."MY_TABLE" ("ID" NUMBER(10,0) DEFAULT "FOO"."MY_TABLE_ID"."NEXTVAL", ...   );

  During the pattern FOO with Data Pump export and import the schema with the remap_schema option in the BAR diagram for example, mapping works fine for all the tables, triggers, etc. except those defaults (as Oracle always writes the schema information in these default values).

  The error in the output log that says 'FOO. MY_TABLE_ID"sequence is unknown, because the sequence is now called 'BAR. MY_TABLE_ID' - mapping so does not work for default values.

  Someone knows how to fix this?

  Thanks in advance

  Concerning

  Hello

  Read this note, I think that it is an expected behavior:

  http://docs.Oracle.com/CD/E11882_01/server.112/e22490/dp_import.htm#SUTIL927

  REMAP_SCHEMA

  .

  Restrictions

  * The mapping cannot be 100 percent complete because there are some references to diagrams that importing is not able to find. For example, import will not find of references to patterns incorporated into the body of the definitions of triggers, types, views, procedures and packages.  -I think in your case it is the default value.

  * If any table in the schema are remapped contains object types defined by the user and this table changes between the time wherever it is exported and the time you are trying to import, and then import this table will fail. However, the import operation will continue.

  HTH,

  Pradeep

• Needing a maximum date using the group value of

  Create table student (dept number(10), dep_name varchar2(10),join_date date,years_attended number(10),end_date date);
   
  insert into student values (1,'I',to_date('3/7/1917','MM/DD/YYYY'),4,to_date('8/26/1987','MM/DD/YYYY'));
  insert into student values (1,'I',to_date('1/1/1900','MM/DD/YYYY'),4,to_date('8/26/1932','MM/DD/YYYY'));
  insert into student values (1,'D',to_date('1/1/1920','MM/DD/YYYY'),5,to_date('8/26/1994','MM/DD/YYYY'));
  insert into student values (1,'C',to_date('1/1/1920','MM/DD/YYYY'),6,to_date('8/26/1945','MM/DD/YYYY'));
  insert into student values (2,'I',to_date('7/1/1900','MM/DD/YYYY'),3,to_date('8/26/1932','MM/DD/YYYY'));
  insert into student values (2,'I',to_date('8/16/1916','MM/DD/YYYY'),9,to_date('8/26/1923','MM/DD/YYYY'));
  insert into student values (2,'D',to_date('8/16/1916','MM/DD/YYYY'),10,to_date('8/26/1987','MM/DD/YYYY'));
  insert into student values (3,'I',to_date('3/7/1917','MM/DD/YYYY'),4,to_date('8/26/1987','MM/DD/YYYY'));
  insert into student values (3,'D',to_date('7/28/1920','MM/DD/YYYY'),6,to_date('8/26/1945','MM/DD/YYYY'));
  insert into student values (3,'I',to_date('7/28/1920','MM/DD/YYYY'),8,to_date('8/26/1965','MM/DD/YYYY'));
  insert into student values (4,'I',to_date('12/31/1924','MM/DD/YYYY'),2,to_date('8/26/1998','MM/DD/YYYY'));
  insert into student values (4,'I',to_date('6/10/1929','MM/DD/YYYY'),1,to_date('8/26/1943','MM/DD/YYYY'));
  insert into student values (4,'C',to_date('1/17/1927','MM/DD/YYYY'),4,to_date('8/26/1955','MM/DD/YYYY'));
  insert into student values (4,'C',to_date('6/10/1929','MM/DD/YYYY'),30,to_date('8/26/1967','MM/DD/YYYY'));
  insert into student values (5,'D',to_date('2/10/1931','MM/DD/YYYY'),2,to_date('8/26/1943','MM/DD/YYYY'));
  insert into student values (5,'I',to_date('2/10/1931','MM/DD/YYYY'),24,to_date('8/26/1962','MM/DD/YYYY'));
  commit;

  I need a join_date of date value maximum for each Department. If max (join_date) has two records for each dept max (end_date) are to be considered. I used a select query

  select * from student where join_date in (select 
  max(join_date) from student group by dept);

  gives me the following result

  1     D     1/1/1920     5     8/26/1994
  1     C     1/1/1920     6     8/26/1945
  2     I     8/16/1916     9     8/26/1923
  2     D     8/16/1916     10     8/26/1987
  3     D     7/28/1920     6     8/26/1945
  3     I     7/28/1920     8     8/26/1965
  4     I     6/10/1929     1     8/26/1943
  4     C     6/10/1929     30     8/26/1967
  5     D     2/10/1931     2     8/26/1943
  5     I     2/10/1931     24     8/26/1962

  But I'm looking for the result that gives me only a maximum value for each column dept. First of all, it should look like to a maximum value of join_date, so two records even join_date max (end_date) are to be considered. The result should be sumthing like this

  1     D     1/1/1920     5     8/26/1994
  2     D     8/16/1916     10     8/26/1987
  3     I     7/28/1920     8     8/26/1965
  4     C     6/10/1929     30     8/26/1967
  5     I     2/10/1931     24     8/26/1962

  Can you please tell me how to rewrite the select query for results above.
  
  Published by: user11872870 on August 2, 2011 17:29
  
  Published by: user11872870 on August 2, 2011 17:36

  Hello

  This is called a Query Top - N , and this is a way to do it:

  WITH     got_r_num     AS
  (
       SELECT     student.*
       ,     ROW_NUMBER () OVER ( PARTITION BY  dept
                                 ORDER BY          join_date     DESC
                           ,                end_date     DESC
                         )      AS r_num
       FROM    student
  )
  SELECT       dept, dep_name, join_date, years_attended, end_date
  FROM       got_r_num
  WHERE       r_num     = 1
  ORDER BY  dept
  ;
  

  Another way is similar to what you posted:

  SELECT    *
  FROM       student
  WHERE        (dept, join_date, end_date)
                 IN (
                      SELECT    dept
                 ,       MAX (join_date)
                 ,       MAX (end_date) KEEP (DENSE_RANK LAST ORDER BY join_date)
                 FROM      student
                 GROUP BY     dept
                 );
  

  I suspect that the first way (using ROW_NUMBER) will be faster.
  In addition, the ROW_NUMBER approach is guaranteed to return only 1 line by Department using the approach of GROUP BY, if there is a link on join_date and end_date then it will return all the contenders in this Department. using ROW_NUMBER, it is easy to add expressions to tie-break as much as you want, and, if there is still a tie, it will be arbirarily pick, one lines involved in the tie as #1.

  Thanks for posting the CREATE TABLE and INSERT! It is very useful.

  Published by: Frank Kulash, August 2, 2011 21:00
  Added GROUP BY alternative

• HSlider as the range of dates in the charts

  IM using hslider as a date range to view database
  on the dates selected for the chart.
  My problem is how to change the chart data, based on the selection of the date of the hslider
  Note: there are 3 sets of line in the table, so the data set should be based on the range of the hslider date selection
  
  Any idea! Examples

  found a use for good double cursor if you try to do something like google, thank you cards to brendan, good job.
  http://www.stretchmedia.ca/code_examples/chart_range_selection/main.html

• How to sort the data in the chart

  Hi, the data feeds that I show on my chart are a kind of account for each of their life cycle. For example, we have 20 in lifecycle = Production, 15 to life = pre direct cycle, 15 = testing life cycle, so on. I want to be able to sort the data by the nature of the life cycel, so in this case, the test-> advance live-> production rather than alphabetically. How to do this?

  Put a 2nd column in your report by using the field of life cycle and then write a CASE statement WHEN:

  CASE {cycle} during the 'Test' THEN 1
  WHEN 'pre Live' THEN 2
  and so on...
  ELSE 0 END

  Hide this column and use it as the sort order.

  see you soon
  Alex

• Constantly add data to the chart 2D

  Hi I'm going to be very difficult to deal with some great paintings. What I'm trying to do is create a program that monitors the 23 entries of a controller for cRIO. Here is the flow of the program:

  1. the program starts and collects 1 sample per second of each entry and place into a 2D array, which has 23 columns and 10 rows

  2 only collect 10 samples, constantly replace the samples in this array.

  3. once a threshold is crossed any of the entries take the previous table and add it to a different 2D array that contains 360 000 rows and 23 columns.

  4. once the table is inserted permanently add data of each entry in the new table at 100 samples/s.

  5. the big Board has 360 000 lines because the program must be able to record data for one hour if necessary.

  I used 23 separate tables and it worked OK but it was much to ineffective and the program was slow. I can't get data to enter in the right table and I'm pretty frustrated so any help will be much appreciated. Thank you

  Adam

  At least I'd be initialize your berries to the largest possible size that you may encounter. When adding data use the subset of table replace to update the table with your new data. In addition, I would put these paintings in a shift register. Avoid to display an indicator of control to data, do not use local variables or property nodes to access the data. or the other.

  Also, do you need to have all the data in the application while it is running? You can use medium running or other methods to reduce the amount of data, you should keep in mind? May store data to disk and keep only part of it in memory and read only comprehensive data when you need it?

• Programmatically set the data on the secondary value axis

  I want to use the nodes property and another code LV to:

  1. create a secondary value axis

  2. take 1 3 tables (t, (t) f1, f2 (t)) and use of the table t for x a value, with f1 (t) on one axis as values y and f2 (t) on a secondary axis for several values of y.

  It was pretty easy with just a curve (bundle just two bays of 1 d and wire of the cluster of a graph), but the addition of this axis Y high school is difficult. Any help is appreciated!

  You can not dynamically add and remove axes. They can be added manually.

  It looks like you want a xy graph, which can support a number of data structures. The one I like best is a cluster containing a table of x vales and an array of the values there. If you want several locations on the graph is here, just feed it with a table of these clusters.

  Mike...

• How can I navigate another feature of a local html and remote html url and transmit data or the key, value pair?

  Hello

  I'm trying to integrate a local html file and a remote url base html file MAF 2.0.1 based app. I want to access another device (based amx) on click of a button on the html pages. How can I achieve the same?

  Already tried with the below which fails with call javascript directly on the page html itself.

  -HTML-

  <! DOCTYPE html >

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = windows-1252 "/ >"

  Home < title > < /title >

  < script type = "text/javascript" >

  document.addEventListener ("deviceready", callfeature, false);

  function callfeature() {}

  Alert ("callfeature called to map");

  adf.mf.api.gotoFeature ("sni.gps.demo.locationFeature", function (req, res) {})

  Alert ("full gotoFeature");

  },

  function (req, res) {}

  Alert ("gotoFeature failed with" + adf.mf.util.stringify (res));

  });

  Alert ("callfeature called to map closed");

  }

  < /script >

  < / head >

  < body >

  Simple mobile Web Page < h1 > < / h1 > < form method = "get" >

  < input id = "ip1" name = "name" / >

  <!-a href = "mycustomurlscheme://somedata" id = "myurl" > map < / a->

  < button type = "button" id = 'mybtn' name = "gpsbtn" onclick = "callfeature ()" >

  go to the feature

  < / button >

  < / make >

  < / body >

  < / html >

  Hello

  update to 2.1 MAF gives you , that can be added to HTML files the and remote access to the MAF since JavaScript API. Deepak mentioned "adf.mf.api.gotoFeature" and I can confirm it works HTML distance (and so it should be using local HTML). For the transmission of data, not sure whether the request URL object it. I would try here EL referencing a managed bean of application-scope defined in the scope of application (?). I tried beans controlled but so far has not tried to access the managed beans to a feature local or remote HTML using EL (although the EL is here)

  Frank

• Put the data of the set point in a waveform graph

  Hello

  In a graph of measure, which is the result of a waveform, I would add data of the set point as well. How can I add this data to set for the chart value?

  In a control loop system, the output is controlled by a labview program. I would like to see the point of this system as well as in the graph, these thresholds are changed at random times, so I don't know how to create a waveform of these data. Should I create a waveform of the setpoint, or y at - it another option to show the set value in the chart?

  See you soon,.

  Rolf

  That can make it much more difficult.

  At one point an array of 1000 points need to be assembled (obviously). How do depends greatly on your structure. Synchronize the time of the two signals can be very difficult. It would be easy if the set value only changed once a cycle of 1000 point.

  You may want to read the SP as an analog input, so you get 2 samples of the material here. In this way the two will always be synchronized. But I'm done alleady assumption, like this, the signal is an analog input (and the target value of one analogue output). What equipment do you use?

  I think always need you a loop to get data and a loop to set the SP. The two loops will be more parallel execution GLSL and synchroniseent. The trick is to synchronize, or for the deterministic timestamps in two loops. If you can make that happen, you 80% there. You could do loops timed loops (using the same clock). Then you get the timestamps in two loops. The MS loop has the queue changes, pushing the value and time. Then the loop of data can use values and hours to create examples of sp 1000.