Put the data of the set point in a waveform graph

Similar Questions

• Having bad to write the set Point to clip MFC

  I've already written a Subvi for reading and parsing the output of a scientific MFC of clamp (16 series), which works very well, however, I have some difficulty in sending a set-point in the MFC. I have attached a Subvi test as I write. All of the com parameters are matched to the CMF as well (19200 baud, 8 bits of data, no parity, 1 stop bit, no flow control). After setting the appropriate resources channel, I enter the following in the field of the buffer:

  \r\r\r\r\r\r\r32000\r

  which I believe must send the deposit to the MFC, but I am seeing no response. When I entered the same string in the VISA test panel in MAX, it works however. Anyone has an idea on what I'm doing wrong? Please also let me know if there is any additional information I could provide that would be useful. Thank you.

  You send the characters '-' and 'r', not a carriage return.

  Place the command string buffer writing '-' display of Codes in order to send '-' Codes correctly. It's a simple right click.

• I want to open links in a new window but cannot find where to put the setting. Having disabled the "open new windows in a new tab instead" box in the Options dialog box.

  When I click a link on a Web page or other software, I want to open in a window, completely new.

  You can hold the SHIFT key and click the left button of the mouse a link to open this link in a new window.

  The setting in tools > Options > tabs is only for links that specify a window target and you can hijack such a link in a new tab instead.

• What is the setting point in v2 profile us Web Coated Swop of gain?

  Hey guys,.

  This may seem a bit of a n00b question, but I really can't find that info all what I Googled it.

  What is the point of setting default in v2 profile us Web Coated SWOP of gain?

  Let me explain my dilemma:

  My printer told me to use the US Web Coated SWOP v2 this profile for a catalog that we will print. 4/4 on gloss 100 # book stock. However, I have used this profile in the past and the prints came out darker as I expected. I don't have a printer of high enough quality to be able to test this in-house, but I am sure that my monitor is too bright or set a contrast too high level. They told me that their standard mast is approximately 10-15%

  I assumed the SWOP v2 profile 20% fattening as seems to be the default for most of the other color settings, but I've never known with certainty. I am trying to decide if I need to use a custom profile with a highest point gain setting.

  Thanks for any help!

  Kenzier

  Hello Kenzier,

  the U.S. Web Coated SWOP ICC profile contains a reproduction of the tones (CRT) curve

  which can only be described accurately by Dot Gain or Gamma.

  For entry into the color settings > Gray we can proceed as follows:

  Color settings > Gray > grey load > (click on) USWebCoatedSWOP.icc > save gray

  This saves a 'black-ink-profile' with a similar name, which replaces the Dot Gain

  or Gamma settings.

  This profile can be interpreted by the ICC profile Inspector (free) program:

  Here we have kTRC (shades of black ink reproduction curve), the red line.

  With the diagonal black auxiliary, it reads 20% efficient fattening,

  the blue line.

  

  The printer should tell you a representative profile (a good approximation)

  for its actual process.

  Cordially - Gernot Hoffmann

• The set point is not not active?

  Hello
  
  How can I do the update to transmit an element?
  
  Let's say I have 3 fields on the page and focus on the first field. When I press tab, the focus must ignore the next (second) and lands of a 3rd.
  The second field (the one that must be passed) is a field of text (disabled, State of stops), read-only Condition Type and it is a static text with Substitutions of State of Session. In other words, it cannot be changed and cannot receive user input. It just shows the value it gets shape data...
  
  Thank you.

  Define a text field element (people with disabilities, is not save state)

• How to program the temperature exceeds the set point (sp), it will be reduced below sp

  I want to simulate a temperature between 15 and 30. When the temperature exceeds 26 it will slowly decrease until it reach below 26... I could only display in a different thermometer. How can I program it so that we can see the temp is reduced to a simple thermometer. Help me please?

  Publish what you have accomplished so far.

• How to manually set the end point of my sequence in the window of the exporter? (Newbie question)

  Hey guys, I think it was easy to do in older versions of first, but I'm not sure.  In the export window, I want to put the final point of the media that I export manually.  All I can use is the small triangle on the right, but that gives me no details.  Curiously, I can manually enter the starting point in time code, but not the end point (it is unclickable).

  Thoughts?

  Thank you!

  Hi BigBrother69,

  bigbrother69 wrote:

  In the export window, I want to put the final point of the media that I export manually.  All I can use is the small triangle on the right, but that gives me no details.

  In the export settings dialog box, drag the playhead to the intended to point, and then press 'o'.

  Thank you
  Kevin

• Eurotherm 2404% manual power set point

  I'm using the LabView ET24xx driver. It works fine if I want to set and control in automated mode. I'm looking for the ability to create a vi that allows me to switch to manual mode (able to do that) and adjust the set value (can't do it). The set point in Manual Mode is generally the percentage of power. I would like to be able to establish to anything other than 0% or 100%, however when I use the driver it does not appear as a method of manipulation of this. I know I'm missing something, and any help would be greatly appreciated.

  Thank you

  Tennessee Paul

  Thank you, Robert. After a lot of research I found the solution:

  Use the VI: ET24XX configure OP key parameters 2. VI

  key point in the use of this VI. The power (or control) setting labeled power output target is in tenths. A value of 5 = 50%. A value of 0.5 = 5%. With this VI no value greater than 10 will work. The VI will timeout on the "Write" command, if the value is greater than 10. I don't know why this VI was established in this way. Remove the output target x 10 serving power and wiring of the power output target control directly in the table of generation within the VI allows a more intuitive entry of power, until we realize the value of the power output target is %.

• 3.6 spot healing Lightroom crashes, not showing do not set points

  I waited months to update to 3.6 because I finally got Lightroom works fine on my machine. Earlier versions would hang on the spot on the sharp heal tool I have to close it using the Task Manager. The problem comes when I edited a file in an external editor and I'm working on the tif file that was imported into Lightroom. The just spot Healing Brush tool will not work. This continues to happen even when I close Lightroom and return to the file later. This me really bums as it overwrites just my workflow!

  I also have a new problem. It could be that I touched something somewhere to cause the following behavior. When I work on an image with the adjustment brush, the set point disappears. It appears so if I want to change the brush settings the point are there not to click on an active brand, so I can adjust the settings again. It started just because I upgraded to 3.6. I think I was using 3.4 before and I've never had this problem.

  Thank you in advance for any help you can provide.

  There is a bug in Windows that will cause LR to hang when you move the circle 'source' (at least some) JPEG files. It can so happen with TIFF. Lightroom will lock tight for a period of time in seconds to several minutes.

  To work around the problem, you can set the processor affinity for Lightroom to use only a single core. Under windows, bring up the Windows Task Manager, go to the process tab, right-click on the process of Lightroom and choose Set Affinity... Disable everything except a processor.

  This bug will be fixed in LR 4, of course.

  HAL

• Average value of the waveform graph

  Hello everyone.

  Can I do an interval of time, where I can measure the average value of a waveform graph?

  for example the fom 0:30-0:45

  

  I have uploadet my VI
  :

  Thanks in advance

  Orlando

  
  

• Merge the signals and waveform graph

  Hi all

  I ask you what follows, because I have little knowledge about labview

  I have a function of merging signals which should take 7 signal as input. but I have no idea how to do to see the 7 signal on a waveform graph outputs. I want to show the 7 signals each of them on a waveform graph. (like research in the panet before I would see an array of unique waveform showing the 7 signals).

  can you guys help me?

  Thank you.

  I'm confused for... Please find attached a really simple screw that does the job you want...

  Are you tracing the curve of a graph or a chart? My VI control is a chart.

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• Is it possible to set the webapp point release date when submitting via ajax?

  I tried to put the release date of a webapp element when the element is entered via ajax.  So far I could not do so... is - it possible?

  For the format of name and the date in the field, I've referenced the API documentation.

  I tried the two release date and release date

  Here is the console of the variable before being submitted

  theItemName: Test

  strDate: 14/12/2014

  Here is the relevant sending code

  var testOpts = {}

  URL: profileAction

  data: {}

  ItemName: theItemName,

  Release date: strDate

  },

  type: 'POST',

  success: {function (data, txt, jqXHR)}

  Console.log ("submit success");

  },

  error: {function (jqXHR, txt, error)

  Console.log ("submit error");

  Returns false;

  }

  }

  $.ajax (testOpts)

  Anyone done this successfully?

  Thank you

  Dave

  Hi Dave,.

  The date format specified in the parameters section is incorrect, I have that fixed and will push the update shortly. Good date format is YYYY-MM-DD - sorry for the lack of consistency.

  I have just re-tested sample code here - reference guide - create web app element (that one had the correct format and it did not work properly.

  Thank you and have a nice weekend,

  Mihai

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• Mobile data does not and the name of the Access Point settings are not available

  I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.

  I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.

  There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says

  "Access Point name settings are not available for this user.

  Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?

  Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help

  This text is a bit misleading, which is something that I have forwarded internally as your comments.

  If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.

  Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.