Data-loading text file

Similar Questions

• Download data from text file for Hyperion ESSBASE by FDM.

  Hello
  
  I want to upload data from text file for Hyperion ESSBASE by FDM. The file format is given below.
  
  
  Entity, Department, designation, effective, SalaryPaid
  E11001, BSG, AsstManager, 12, 820000
  E11001, BSG, Manager, 6, 740000
  
  
  Where staff and SalaryPaid is the Member of the account dimension. Entity, Department, and designations are the dimensiosn in the ESSBASE.
  
  Is it possible to download the file above using FDM, can we have two account member in the line?
  
  I am brand new with FDM. ask for your help.
  
  Kind regards
  Sunil

  Create two scripts to import (choose Import Data Pump when you are prompted for the type of import script)

  (1) call the GetAccounts 1st and 2nd PutAccounts
  (2) associate GetAccounts size amount in your import format.
  (3) associate PutAccounts with the account dimension in your import format
  (4) adding NZP expression to dimension of amount
  (5) in GetAccounts put the following code...
  +' Get the names of account in the header line.
  If DW. Utilities.fParseString (strRecord, 5, 4, ",") = "number of head" Then
  + ' Local variables for the account names.
  + Acct1 dim +.
  + Acct2 dim +.
  +     +
  + ' Head Count (column 4 of 5) +.
  + Acct1 = DW. Utilities.fParseString (strRecord, 4, 5, ",") +.
  + ' Wages (column 5 of 5) +.
  + Acct2 = DW. Utilities.fParseString(strRecord, 5, 5, ",") +.
  +     +
  End If

  GetAccounts strField =

  (6) in PutAccounts put the following code...

  +'+ Local Variables
  Dim AcctName (2)
  Dim AmountVal (2)
  Dim z
  Dim rsAppend

  + "The names of individual account is analyzed and stored +"
  AcctName (1) = DW. Utilities.fParseString (RES. PvarTemp1, 2, 1, ',')
  AcctName (2) = DW. Utilities.fParseString (RES. PvarTemp1, 2, 2, ',')

  +' If student for accounts from here import file.
  AmountVal (1) = DW. Utilities.fParseString (strRecord, 5, 4, ",")
  AmountVal (2) = DW. Utilities.fParseString (strRecord, 5, 5, ",")

  +' Name of temporary importation work table +.
  strWorkTableName = RES. PstrWorkTable

  +' Create temporary table recordset trial balance +.
  Set rsAppend = DW. DataAccess.farsTable (strWorkTableName)

  For z = 01:58 ' this can change depending on the number of additional accounts processing

  + If IsNumeric (AmountVal (z)) Then +.
  +          +
  + If (z) AmountVal <> 0 Then +.
  +          +
  + ' Create a new record and to provide its field values.
  + rsAppend.AddNew +
  + rsAppend.Fields ("DataView") = "CDA" +.
  + rsAppend.Fields ("PartitionKey") = RES. PlngLocKey +.
  + rsAppend.Fields ("CatKey") = RES. PlngCatKey +.
  + rsAppend.Fields ("PeriodKey") = RES. PdtePerKey +.
  + rsAppend.Fields ("CalcAcctType") = 9 +.
  + rsAppend.Fields ("Account") = AcctName (z) +.
  + rsAppend.Fields ("Amount") = AmountVal (z) +.
  + rsAppend.Fields ("Entity") = 'chain of the entity here ' +.
  + rsAppend.Fields ("UD1") = "string C1 here +.
  + rsAppend.Fields ("node2") = "String C2 here +.
  + rsAppend.Fields ("UD3") = "String C3 here +.
  + rsAppend.Fields ("UD4") = "string C4 here +.
  + "Add folder to the collection +"
  + rsAppend.Update +
  +               +
  + End if +.
  +     +
  + End if +.

  Next

  +' Close the recordset.
  rsAppend.close

  If DW. Utilities.fParseString (strRecord, 5, 4, ',') <> '0' then
  + PutAccounts = DW. Utilities.fParseString (RES. PvarTemp1, 2, 1, ',') +.
  On the other
  + RES. PblnSkip = True.
  End If

  You may need to change the aboveto that meet your exact needs, but the basic structure of the scripts should not change too

  Published by: SH on May 25, 2012 10:34

• Digital loading data from text file for Test of numerical limit

  I am a new user of TestStand 2014.  Just downloaded the demo ran successfully the computer.dll tutorial & example "loading limits a File.seq text"; & is now trying to build my own sequence from scratch.  I want to load a number from a text file using the property Loader.  The file contains the following:

  GGbeg
  484
  GGend

  My hand sequence contains 2 markets (see attachment):

  Charger property (which reads the text file & must store the number 484 in the Step.Result.Numeric variable, right?)

  GG-digital-test (which should test the number 484 in Step.Result.Numeric as a Data Source, right?)

  But when I run it, the measure indicates "0" for the value instead of "484".  What I am doing wrong?  Thank you in advance for your help!

  George

  Hi George,.

  The text file must be in the format, includes no property magazine. Use the following in the text file to make it work:

  GGbeg
  Result.Numeric
  GG-digital-test 484

  Value of the variable

  Value of the variable

  Value of the variable
  GGend

  In the Tools menu of the sequence editor, there are some 'Properties Export/Import' tool, which helps to create text files to be used with charger property stage. I highly recommend to create the new file using the tool and then edit the file to change the values.

  -Shashidhar

• Cannot find the file error when loading data from text file to Oracle

  Hello
  
  I have an interface where I am loading a data from the text file to Oracle.
  But when I try to do that I am getting following error.
  
  ODI-1227: SrcSet0 (load) task fails on the source FILES SAPMM connections.
  Caused by: java.sql.SQLException: file not found: d:/mdb/#General.get_filename
  to com.sunopsis.jdbc.driver.file.FileResultSet. < init > (FileResultSet.java:160)
  at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
  at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
  
  SAPMM is the name of the connection.
  I use get_filename to get the name of the file and it is fetching a correct value as long as this variable is updated in the previous stage of this interface.
  KM, used for loading is SQL file
  
  What would be the cause of this error?
  
  Thank you
  Mahesh

  Also a single query would be ok if I'm moving only generated package (according to your scenario3) scenario and not UI? It running properly?

  Yes... It runs successfully

• Error message ORA-01722 loading data from text file

  Hi all

  I want to load data into the table 'dh_healthcare '.

  with the columns:

  ...

  NUMBER OF RMI,

  NUMBER OF KUM,

  ...

  Loading data with the APEX data workshop, I got the error message ' ORA-01722: invalid number. "

  For example, ALEXIS has the following values:

  1.99

  6.49

  4.14

  ...

  KUM:

  139,30

  51.32

  165,23

  ...

  I tried to put the precision and scale in the column definition, but the same error message appears.
  When I changed the data type of these columns in VARCHAR2 (60) the data loaded without error message.

  Someone at - it an idea to solve the error?

  Thank you

  Ben

  This has to do with the settings of NLS Session about the decimal separator and the group separator.

  How you load the data in the table determines where and how you set the Session variables.

  MK

• Write data to text file generates the error

  Hi all

  I need to write data to a file using TestStand and I configired the entrance and outside like below, but I get the error message like ' an error occurred 'Write' calling in 'ITextStream' of 'Microsoft Scripting Runtime' [error Code:-2146828234].

  I followed the same procedure for reading text that works very well for me.

  Hope others might have faced the problem / or I do something wrong.

  Do what is necessary.

  

  Found problem while opening a file I used IO Mode ForReading instead of ForWriting.

  Unnecessarily the thread created, but then hope this can help someone later when they deal with a particular issue.

• Convert data from text file to display for hex UDP transmission controls

  Hello

  I'm reading packets ethernet from a text file containing the actual hex data packets to then send these accurate return through a writing UDP hex data. I can't understand how to feed data into the function of writing UDP as real rather than characters ASCII hex data, as it does by default. I had the screen on the last VI before the writing of the UDP to "hexadecimal display mode" and if I manually type the hexadecimal values in the VI (hexadecimal string to binary String.vi - attached), then it passes the commands correctly. However,... when I fed the string of text in my text file data in this VI, it seems to be the substitution of this hexadecimal display on the VI input mode and the resulting entry in my UDP is still ASCII character mode. I tried to use a cast inside this VI, type... but that doesn't seem to work right. I have attached the main VI and VI which tries to prepare data before reading the UDP protocol. I've also attached an example of text file of data that I am an attempt of analysis.

  Any help would be appreciated,

  Thank you

  Hi jsrocket,

  the attached example should work as a transformation.

  Mike

• read and medium n data from text file

  I acquire [a waveform of reading] oscilloscope digital data that is stored in a column in a text file.

  I need to read selectable amount of data at average/parcel them points.

  So basically I want to have a text file with millions of data points, but I want to draw not to say that all 1000. data point. I tried a lot of things I found here on the forum, but as I'm new to LabView, none of them really worked.

  Does anyone have a suggestion.

  Thank you.

  
  

• How to write graph of waveform data to text file with the option to the user to do

  So, I'm new to labview and will have bad to write a program in particular.  I have a waveform graph that runs for 120 seconds, generating a sine curve.  I am, however, having a time difficult get the program to write the x and are coordinated in a text file.  I've attached what I have so far.

  The first task I was assigned was to write a program that creates a curve of snusoidal on the front panel by adding a data point every half second for 120 seconds.  The plot should starts only if the user presses a button to start.

  The next part is to give the user an option to write the data generated in a file of worksheet called 'sine.txt '.  The file name and location should be hard-coded.  The file must contain the x and there contact information of each data point in columns separated by tabs, also known as the delimited.

  I spent several hours refining the attached program, and I can't seem to make it work right.  Any suggestions would be helpful at this stage.

  Sincerely,

  A student of chemistry frustrated whose research mentor is out of town

  First, you create files Excel.  You create text files.  And it seems that your writing on a file already created X (time) vs Y (curve of data) that is delimited by tabs.

  All you do is simply too complicated or a Rube Goldberg.

  All you need is the joint.

• problem with the backup data in text file

  Hello

  The problem I am facing wihile, saving the data in the text file is that everytime when I'm slecting the path of the façade, data that are recorded are added with the previous data, not only in the new text, the new data set is saved but also, is there any previuos run for the program , the corresponding data is also present in this text file.

  However, when I change the same ''(file path) to 'constant' in the control block diagram, and then add the path of the file, it doesn't have this problem. Basically, changing the "file path" constant in the diagram of control block (so that it is displayed in the front panel) is at the origin of the problem.

  Help, please!

  Thank you

  Your shift on the loop Register For is not initialized. It will keep the value of the string since the last time that he performed. That initialize and it should solve your problem.

• Import data from text file of control of the ring.

  Is it possible to import data to a text ring with labview control.

  I have several definitions of register in the ring controls, but manual entry would take a lot of time.

  Was wondering if there was more automatic way, I could read the values from a file.

  Thank you

  Jim

  Using the first method gives you the ability to extend such that each column specifies a control of the ring if you need fill the multiple rings.

  This example assumes that all of the three rings contain the same number of elements. If this isn't the case, you will need to create a Subvi, which removes the empty elements. [Edit - create a text file that contains a column for each ring, separated by a tab character.]

  

• Write the measurement data in text file every 10 seconds for a duration of 2 seconds, creating a new file every time.

  Greetings,

  I'm working on an application for the acquisition of data that runs constantly and need to record data at intervals of 10 seconds for a duration of 2 seconds.

  On each interval recording, I have to create a new file that contains a number of journal in the name of the file (Test_1.txt, Test_2.txt,...);

  and add to the current time and date on the header of the file.

  My question is how can I do this with what I have so far?

  The attached vi is a notion of what I am trying to accomplish. The application also has the DAQmx read functions in the vicinity while loop.

  and a few manipulations of data. Apart from the main loop, I create and launch tasks DAQmx.

  Thank you for your help.

  Best regards

  Matej

  Hello

  Thought this one myself.

  Here is the solution, if anyone needs something similar.

  Best regards

  Matej

• extract data from text file to draw the graph

  Hello

  In the attached data file, I would like to extract the (real) % Freq column and then be able to plot them on a graph of % Freq vs other columns (i.e. % Freq vs Amp, or % Freq vs Test1...).

  Any help will be greatly appreciated.

  Thank you

  hiNi.

  hiNI,

  There are a lot of questions to ask, but to answer your question immediately ' How do I parwse the necessary data as numbers? (see the attachment, png)

  1. read worksheet

  2 table subset rated 19

  This should give you your numeric values for all your X and Y values.

  Chazzzmd

• Reading data from text file

  I would like to read data (sepereated of numbers with spaces) and write them in a table. That's what I have so far.

  Thank you.

  Try to use "worksheet reading File.vi. The only thing you will obviously need to change is the delimiter character, which seems to be a white. In the default configuration, spreadsheet files using the tabs as separators...

  Norbert

• Import data from text file

  Dear friends,
  
  I am facing an error below when the select statement
  
  SQL > select * from ext_test;
  ORA-29913: error in execution of legend ODCIEXTTABLEOPEN ORA-29400: data cartridge error error opening file c:\mydata\EXT_TEST_1948_3788.log
  
  
  
  I did it under labour. Please resolve above problem, I will be very thankful to you.
  
  
  CREATE or REPLACE DIRECTORY TEST_DIR AS "c:\mydata."
  GRANT READ, WRITE on DIRECTORY TEST_DIR FOR myuser.
  
  
  As myuser:
  SQL > CREATE TABLE ext_test
  2 (id NUMBER,
  3 empname VARCHAR2 (20).
  Note NUMBER 4)
  5 ORGANIZATION EXTERNAL
  6 (TYPE ORACLE_LOADER
  7 DEFAULT DIRECTORY TEST_DIR
  8 ACCESS SETTINGS
  9 (RECORDS DELIMITED BY NEWLINE
  10 FIELDS TERMINATED BY ', '.
  ' 11 JOINT POSSIBLY BY ' "'
  12 (id,
  13 empname
  14 rate
  15)
  16)
  17 RENTAL ("test.txt")
  (18);
  
  Table created.
  
  Concerning
  Kamran

  >

  Hi Keita,

  SQL > select * from ext_test;
  ORA-29913: error in execution of legend ODCIEXTTABLEOPEN ORA-29400: data cartridge
  Error opening file c:\mydata\EXT_TEST_1948_3788.log error

  You have no "LOGFILE" clause in the CREATE TABLE section - I wonder why she strives
  Create one if you did not?

  It's probably the permissions as Jac said. If you have checked that, look here

  http://orafaq.com/node/848
  http://www.adp-GmbH.ch/ora/Misc/ext_table.html
  http://www.Oracle-base.com/articles/9i/external-tables-9i.php
  [url www.oracle-developer.net/display.php?id=204]<=== exp.="" this="">

  The four sites above are very good for Oracle generally if you're looking for tips, tricks, & c.

  HTH,

  Paul...

  >
  >
  >

  I did it under labour. Please resolve above problem, I will be very thankful to you.

  CREATE or REPLACE DIRECTORY TEST_DIR AS "c:\mydata."
  GRANT READ, WRITE on DIRECTORY TEST_DIR FOR myuser.

  As myuser:
  SQL > CREATE TABLE ext_test
  2 (id NUMBER,
  3 empname VARCHAR2 (20).
  Note NUMBER 4)
  5 ORGANIZATION EXTERNAL
  6 (TYPE ORACLE_LOADER
  7 DEFAULT DIRECTORY TEST_DIR
  8 ACCESS SETTINGS
  9 (RECORDS DELIMITED BY NEWLINE
  10 FIELDS TERMINATED BY ', '.
  ' 11 JOINT POSSIBLY BY ' "'
  12 (id,
  13 empname
  14 rate
  15)
  16)
  17 RENTAL ("test.txt")
  (18);

  Table created.

  Concerning
  Kamran

  Published by: Paulie July 24, 2012 10:12