data recovery, which is losing vista recovery form

Similar Questions

• Recovery software data and the partition for Vista?

  I have a HP desktop computer that started having problems starting. Startup Repair couldn't fix, but showed "no OS installed. I guess it's a corrupted MBR/MBT problem.

  In any case, I made the fatal mistake assuming that Vista has the same functionality of XP restore/recovery and would simply repair the file system not complete format/reinstall. Within two seconds, I realized that it was reformatting the drive and disconnected from the computer (because you can't give up a recovery).

  Now, of course, the player starts not at all and displays "No MBR".  I removed the disk and put it in an external USB box to see the content. It only shows a new Windows and a few other folders with one or two files system in them.

  Anyway, I know that all the old data has been not overwritten in 2 seconds, if it is still there. Not to mention, HP no longer ships of installation disks of Windows and preload in place of the images in a separate partition. I need to recover this option to re - install Vista, in the worst case scenario.

  So, I need/file recovery at least get software partition all my data. There are a hundred apps out there, and it is difficult to tell which are the best (they are quite expensive). I can't find any reputable sites that do an actual test on the Soft full - for example, C/Net only tests the features of the limited demo version.

  At the very least, I would like to recover my lost data on an external drive, then recover if possible, the installation of Vista partition and do a clean install on the disk.

  Are there apps free open source reliable and easy to use? So far, I am considering

  EASEUS Data Recovery Wizard Smart Partition Recovery

  Try this info below.

  You may need to contact the data recovery for it experts.

  Be warned: they are very $$$.

  Data recovery:

  Use Knoppix Live CD to try to recover your data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Which of the 2 hard drives do I need to do data recovery on my Sony PCG-8Z1L laptop

  The Sony I have laptop comes with two hard drives RAID.  Hard drives has failed and I have to pay for data recovery, but they charge $300 per car.  Which two players would have my photos and documents installed on so I could get that one back?

  Hi RC2121,

  If you said that the Unit came with a RAID set (raid 0 interleaves), there are two disks.  You can read more about it here.  RAID configuration 0 save files on the two pilots, which means that on one half and the other half on the 2nd disk.  Therefore, the answer is two discs.

  Nick-

• Speed of data recovery of DIAdem data base using data Finder Toolkit in LabVIEW

  I have developed a LabVIEW code using the toolkit OR database search to extract the data from the tiara. I formed queries for data extraction. But data recovery takes more time to retrieve the data.

  I have attached my image of LabVIEW code with this post. In what I circled the VI 'Waveform results', which is the VI toolkit database search that takes more time for extraction. My trial, application takes only a few milliseconds to run, but 'Results to Waveform.vi' takes about 35 seconds. I also want to run the same type of search for 5 times. In total, it will be taken approximately 1.5 minutes to 2 minutes for the execution.

  Is there another alternative way to do this research? Kindly help me to resolve this.

  Thank you

  Driss

  Hi Nanda,

  If you want to extract all the data channel of each channel group you can use the channel group object type of result for the Query.vi to run instead of the channel.

  When you load the channels through its channels of content groups are treated as a unit and the loading process should be faster. Hope that helps.

  Kind regards
  Eva

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Options of data recovery for crashed HARD drive

  My friend HARD drive gone bad. She has not saved. She has her thesis on it (any resemblance to characters from the fictional movie, living or dead, is coincidentalt. "It's true).

  I know there are options to recover the data. But I'm not familiar with all of them and how much they cost.

  One of her friends which is a network administrator, and continued his studies of masters in computer security will attempt to recover the data for it. I fear that it may just try to boot from a CD and try to read the data, which can worsen the damage.

  What other options does have?

  Thank you

  If it crashed, she may need data recovery specialists.

  These are some $$$.

  You can read this:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Types of backup destination VMware Data Recovery

  IM test VMware Data Recovery and reading it can save to different destinations. Here's a sentence from of the Administrator's guide.

  You can store backups on network, VMDK shares, or RDM.

  The only option I see is the network share and make a folder called VMwareDataRecovery with other files and folders in it. If I backup more 1 VM to this nextwork share looks like it mixes everything together. I was under the impression that you can save in a file single vdmk.

  The only options I have under VMware Data Recovery for Destinations are Refresh, add a share of Nework, Format, Mount, Unmount, Extend and integrity check

  Remove you it from the virtual computer by means of the settings?  If so, have you selected the option to remove the virtual machine and remove the disc?  If you have them removed from the virtual computer through the settings, then you can delete browser data store.  It will come to your space.  Also, see IO errors is because you took the disk to the virtual machine without removing firstly by vDR Console's Configuration.

  That said, I would do the following:

  1. Ensure that the VM vDR does not any VMDK attached other than the VMDK root which is 5 GB in size.

  2. Open the browser of data store and make sure that the former VMDK you created have disappeared.  If not, select them and click on delete.

  3. Go to the Configuration Console for vDR and look at Destinations of backup to make sure there is nothing there.  There should be nothing in the list of destinations, if there are, remove them.

  4. After checking the above, create a new size 15GB VMDK.

  5. Restart your virtual machine of vDR

  6. Go into the Console to Setup vDR and select the disk that you created in the backup Destinations, do a right click and select format.

  7. The size should report something similar to what my screenshot of previous shows.

  I would like to know if that works for you!

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• What is the cable of data recovery?

  With my flame came a wire called 'data '. What is the difference with a normal Micro USB cable? Is it connected differently?

  I noticed that when I connect to my flame using a standard Micro USB cable, then it behaves funny. I saw him restart spontaneously, and also saw him plug and unplug several times. With the cable of data recovery, connections appear to be stable, but I wonder why. The Keon has worked well with a standard Micro USB cable.

  Hi Fekle,

  I'm not sure what the difference is in the cable of data recovery. For me, when I use this cable to recharge, my camera flame has strangely, sometimes requires me to remove the battery before restarting the unit.

  I had written to T2M asking how to use the wire and this was their response:

  Please follow the instruction below to rescue the phone.
  

  Firstly, we send a Recovery Cable with RED label with Flame phone, which is placed outside of Flame package. Please make sure that you have it.
  

  Secondly, please download Emergency rescue tool from http://cds.w5v8t3u9.hwcdn.net/Flame%20Rescue%20Tool.zip, unzip it, run Flame.exe and follow the attached PPT instruction to start the rescue.
  

  -Ralph

• SSHD Toshiba MQ01ABD100H - Firmware / data recovery problem

  Hello!
  I have the mission critical data on a MQ01ABD100H of Toshiba to SSHD which was in a Sony VAIO for less than one year who decided to stop working from one day to the next. All I care about is the data. A professional data recovery company apparently reputable rated player, told me that it was a "mechanical failure", said they could recover the data and gave me a quote of $1500.00. A week later I was told something different; They said the platters and heads seem to agree and the problem seems to be on the circuit board and/or flash drive, and they didn't know how to recover the data. They told me that they have consulted Toshiba too. I asked them if they replaced the pcb Board and they would not tell me or answer questions more. I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  Here's what I know for sure; the bios of the machine of Sony VAIO Windows 8.1, correctly recognizes the drive. However, it does not start and is not accessible or recognized with cmd prompt Windows 8.1 UEFI options. The drive is not encrypted. After putting the reader into an external enclosure and its connection to another Win8.1 machine, the player starts with no extreme sounds of survey. Slowly, she clicks a few times as if the heads are looking, but then calms down and keeps running quietly. I have installed a Data Rescue PC3 software that recognizes the drive and its attributes correctly but can't read or clone. I have the Partition Wizard software mini tool, which recognizes the drive correctly, but shows the drive as being unreadable.

  That's what I'm trying to do. I'm looking for a donor on mine, with the same model drive, date, firmware, site, number of PCBS, hard drive code.

  Now, here is my unknowns and I appreciate everyone a preview with these. If I change the pcb edge myself, I need still more likely transfer the firmware for the new Board of Directors, even if I try it without doing it. I don't know where the firmware is stored, is there a rom chip or is it stored in the Flash Player. I'm not certain if, with this model of SSHD, if this can be done with replacement of the chip or the software? If it is stored on the Flash drive how is available independent of the HHD part? Must the reader Flash itself be harvested? But what happens if the flash player is bad, how can the firmware ever be recovered? Any ideas anyone? ... other than myself shot in the head, I'm kidding. I think that this may be a common problem that will often not resolved.

  I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  I am not an expert but if applications cannot access the data and cannot read data from the SSHD then you will need professional help...

  I found the storage Toshiba page where you could get details on this SSHD
  http://Toshiba.SEMICON-storage.com/e...ient-sshd.html

  Mate good luck...

• Linux data recovery software

  I have recentaly lost my data from my Linux operating system. I used Stellar Phoenix Linux data recovery software. This [recovery Linux | http://www.data-recovery-linux.com/] software retrieves almost of my data. Demo version of the software is free in which you can see the preview of recoverable data.

  Hey

  Thanks for the link. :)

• taken over by "data recovery file. cannot remove

  I was ibvaded by a program? calls the data recovery. He wants 87,50 USD to fix my problem. (WHAT PROBLEM? OTHER THAN THEIR INVASION?) Now I have wrnings as "sector of disk not found". I tried the system restore, but no luck.

  Hello

  (1) have there been recent changes to the computer before the show?

  I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• Help to remove the partition on a hard drive and data recovery

  I have two hard drives in my PC, the C: drive is 80 GB, and the F: drive is 120 GB.  The second drive (120 GB) is divided into two partitions.  I just deleted the partitions and makes the hard drive again in a single disc, however I had some important files on the F: drive that I thought I had copied to the C: drive but they are not there.  Is there anyway that is using the software I can return the drive to two drives and recover my data, please help

  Hello

  First of all, do not use the hard drive. This can make things sunk. A few things may already be unrecoverable. I would even delete the drive letter to stop inadvertently automated processes to use.

  There are two ways I can think of.

  1. buy a partitioning software disk that supports the undelete partition. On windows XP PartitionMagic was a very good product if symantec will still sell it. Given that Symantec has continued to develop, I had to switch to product partition Paragon. Sound was trash to some things, cloning in particular a double boot with loads of partitions - it has an undelete function which I didn't use. The fact that you have created a new partition could mean that the restoration may not work. You may need to delete the current, probably empty, partition everything first and then perform the restoration.

  2. buy a data recovery software that will scan the hard drives, including the unpartitioned space. I chose R-Studio and it was very good stuff even recovery from hard drives that fail. It was not 100% effective, but it is perhaps down to the severity of failure rather than the product. In situations like yours, it was very effective.

  Please mark this as useful or response if applicable.

  Tricky

• CD data recovery

  Is there a way to access / retrieve data from a cd that was not closed after a computer get locked?  During a meeting of work on Word, the system locked up on a document record the routine and the cd extracted with the "close CD so it can be used on other computers ' and is now unaddressable. There are a lot of files that I would have access to the CD-ROM. All hope to access again?  Using Vista on a HP Pavilion dv9500 laptop.

  CD DVD data recovery links

  http://www.jufsoft.com/BadCopy/

  http://www.Google.com/search?SourceID=navclient&ie=UTF-8&OE=UTF-8&q=recover+data+from+CD

• Netflix in WMC «there was a problem of data recovery...» »

  I installed the latest round of updates (Ultimate) of Windows Vista and it apparently burst Netflix in WMC.  Now, I get the error:

  "There was a problem of data recovery. Make sure your internet connection is working and try again. »

  Internet works on the machine.  I reinstalled Silverlight (v4) and Netflix for WIndows Media Center.

  How to diagnose and repair the problem?

  Thank you!

  Keith...

  Sorry for the delay, but I've been busy (in my free time) trying to get this to work.

  I gave up trying to resuscitate MCE and installed a brand new Windows Vista Ultimate Edition with Service Pack 2.  After apply all WIndows patches and installation of Silverlight, I have the "Netflix" element in MCE.  He invites me to install, what I'm doing.  However, every time I start MCE and go to Netflix, he tells me to do reinstall - no login screen.

  I tried all the "mcupdate" article and then supported your steps above, but no go.

  I did this twice, so it wasn't just a fluke.  Apparently, the part of Netflix to MCE is not detect the plug-in that it installed.

  Any thoughts on what to do then?

  Thank you again...

  Keith...

  Later: I ran "mcupdate" after the steps you suggested, and now Netflix is gone again!

  Later: same problem on my other computer running MCE and Vista.  I don't want to mess up this computer so I left as what.

  Later: opening of a new post on problems become Netflix to work with a clean install.

• Failed to load movies Netflix in Media Center message appears to indicate there was a problem of data recovery. Check the works of your internet connection and try again.

  Original title: cannot load Netflix movies in Media Center

  Netflix photo click on the message appears indicating a problem of data recovery.  Check the works of your internet connection and try again.

  Hi Barbarasimonetti,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: You can follow the steps described in the article below

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  http://support.Microsoft.com/kb/972496

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************