Data store Clusters does not

Similar Questions

• provisiond data store space does not match with the space of the VMs

  Hi guys,.

  I have the particular phenomenon on my cVenter environment. Space brought into service on data warehouses does not correspond with the really used capacity of the virtual machines.

  Details:
  VCenter: VMware vCenter 6.0.0 3634793
  ESXi: ESXi 5.5.0, 3568722
  Storage: The Netapp Cluster Mode
  NFS data warehouses

  Virtual machines allocate more space such as assigned. It could be 100% more space. There are no files that are responsible for this in the data store. We have allowed efficiency of storage which means on the Netapp deduplication.
  In the opinion of vCenter - the data store has a provisiond about 1 TB space and really about 550 GB space (space of each unique virtual machine).

  You know this problem or something like that?

  Best regards

  Thanks for your replies, but it's a feature of Netapp called fractional reserve.

  This reserved feature 0% or 100% of the space.

  Has anyone experiences with the option of fractional reserve and volumes NFS for ESXi? What is the best value for this?

  Romano

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• ODI-15005: data type "varchar" does not close in technology: file?

  Hello

  I created the interface that loads data from flat file (source) oracle (target).

  For this, I took LKM SQL FOR SQL and SQL TO ADD FILE IKM.

  Please check the source and target data types.

  

  When I am executing this interface, I get the error as

  ODI-15005: data type "varchar" does not close in technology: file.

  
  

  To resolve this error, I changed the types of flat file data.

  I went to the Manager of topology-> select technology of files-> data types: string - > orcle to the number data type.

  Even if I do not correct this error. Please help me.

  
  

  Thanks in advance,

  A.Kavya.
  

  Hello

  Can you please check what are the data types for the columns in your data target store. As you say it's a file, can you check if the data type for the two columns has the String value (and not varchar).

  Thank you

  Ajay

• try changing the settings of iTunes store password does not work: System does not recognize the apple id account password

  Hello.

  When I try to change the settings of iTunes store password does not work: System doent recognize the apple ID account password

  Sign out and then sign in again the apple between the device and what not ID recognize the password very well, but when Im going to change all password parameters, system ask me the password again, I write and ask again... n times.

  I tested in different devices, iphone and ipad, with two different accounts and beta of ios 9.2 and 9.2.1. Still the same error.

  The problem is that when I try to download a free app from app store ask me the password and does not work so I can't download any new script.

  Thanks for your help.

  Best regards.

  Hello bdepaco,

  Thank you for using communities of Apple Support.

  I see that you have any questions, change your password ID Apple via iTunes. Have you tried to change your Apple ID account page? Take a look at the following article for the steps:

  Change your Apple ID password

  Once you have changed your Apple ID password, it presents a few additional measures to be taken.

  What to do when you have changed your Apple ID email address or password

  Best regards.

• Vista Data Execution Prevention does not let me play tractor simulator 2013

  Vista Data Execution Prevention does not let me play tractor simulator 2013

  Moved from feedback

  Hi, Tractor1o1,

  If you choose to protect all programs, you can always turn off DEP for individual programs. If you think that a program does not run correctly when DEP is enabled, check for a compatible version of the DEP program or an update from the software publisher before you change your DEP settings.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

  Please do not duplicate messages.  It is a violation of the Code of conduct.  See the article "Please Don't ':

  "Post questions that are identical or similar to the questions you have already posted. When someone has an answer to your question, that person will respond. »

  http://answers.Microsoft.com/en-us/page/FAQ#faqCodeConduct

  Thank you.

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• Data Recovery Advisor does not work

  In our environment of RAC DB 12 c Data Recovery Advisor does not work? Why?

  The Data Recovery Advisor is only supported by ORACLE DB Single Instance!

  https://docs.Oracle.com/CD/E60665_01/db121/BRADV/rcmrepai.htm#BRADV246

• List of virtual machines in the data store that is not in stock

  Hi guys

  PowerCLI rookie here, sorry for the stupid questions.

  I'm trying to clean up a bunch of singehost with local data warehouses. So I need a script that can display a list of files of virtual machine on a data store that is not used by VMs in the inventory. One of the problems is that the files on the data store, isn't every means, named exactly the same as the virtual machine in the inventory.

  Summer watching this, but I think the term "orphan" is "sent, in my view, it is:

  https://communities.VMware.com/thread/266913

  Also it is - this one, I think that I should be able to change it to do what I want:

  http://www.wooditwork.com/2011/08/11/adding-VMX-files-to-vCenter-inventory-with-PowerCLI-gets-even-easier/

  Any tips or hints to push me in the right direction would be appreciated.

  Please try:

  $AllFilesLocalDatastore = get-data store 'localdatastorename ' | Get-fileindatastore

  $FilesIdentifiedAsAssociatedToAllVMs = get-FilesIdentifiedAsAssociatedToAllVMs

  #The two functions above are available here http://thecrazyconsultant.com/find-orphaned-vmdk-files-workflow/

  Check the contents of the two variables for example with VGO or export-csv

  $AllFilesInESX01LocalDatastore | OGV

  Try:

  $FilesNotIdentifiedAsAssociatedToAnyVM = $AllFilesLocalDatastore | {foreach-object

  $FullPath = $_. FullPath

  If ($FilesIdentifiedAsAssociatedToAllVMs.FileName - notcontains $FullPath) {}

  Return $_

  }

  }

  $FilesNotIdentifiedAsAssociatedToAnyVM | OGV

  #The over a will contain all the files that are not identified as associated with any virtual computer

  $ProbablyOrphanedFiles = $FilesNotIdentifiedAsAssociatedToAnyVM | where {$_.} FileTypeFullName-match "VMware.Vim.Vm *"-GOLD ($_.) FileTypeFullName - eq "VMware.Vim.FileInfo" - AND ($_.) FullPath-match ".vmsd" - or $_. FullPath-match ".vmxf" - or $_. FullPath-match "aux.xml" - or $_. FullPath-match ".vswp" - GOLD ($_.) FullPath-match "hard" - AND $_. FullPath - notmatch 'ctk.vmdk') - GOLD ($_.) FullPath-match ".vmx" - AND $_. FullPath - notmatch ".vmx ~"- AND $_. FullPath - notmatch "." VMX.lck")))}

  $ProbablyOrphanedFiles | OGV

  Edit:

  Changed the name of the data store, it seems that he was not supposed to be in the first screenshot.

  Edit2:
  The first command control switch, more details in the last post in this thread

• Export model data as xml does not work

  Export model data as xml does not work

  Please advice on this subject? I created a template with editable regions - index.dwt, but when I try to export the model as xml - it is greyed out. I read another thread in this forum, but I'm not clear on the second stage of the given statement. Please click on the header to see step 2 on a previous thread.

  Please notify.

  THX

  Now that you have a template file, you can create a page by using the template file. Have a look here http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7ef da.html.

  Once you have created the page, you can export as XML.

  GRAMPS

• Date of Condition does not, not cming point value.

  Hi friends,
  
  I create a form to place order and I have created a MASTER table for fixed point rate between two appointments with price as A, B, C, D code.
  
  In the form, I for item
  
  : P1_ORDER_DATE
  : P1_ITEM_CODE
  : P1_PRICE_CATEGORY check the mailing list
  
  : P1_ITEM_RATE
  
  Rate of point, I put in Source,
  Source Type SQL - Quary
  Vale of source
  

  select RATE_1 from SAM_ITEM_MAS where ITEM_CODE =:P1_ITEM_CODE and  PRICE_CATEGORY=:P1_PRICE_CATEGORY and :P1_ORDER_DATE
   between FROM_DATE and TO_DATE

  My Table
  

  CREATE TABLE  "SAM_ITEM_MAS" 
     (     "ID" NUMBER NOT NULL ENABLE, 
       "ITEM_CODE" NUMBER, 
       "PRICE_CATEGORY" VARCHAR2(5), 
       "FROM_DATE" DATE, 
       "TO_DATE" DATE, 
       "RATE_1" NUMBER, 
       CONSTRAINT "SAM_ITEM_MAS_PK" PRIMARY KEY ("ID") ENABLE
     )
  /

  that does not code but if I run this code in the SQL command, then there working fine.but not to the order of the DAY: P1_ITEM_RATE.
  
  I want when I select P1_PRICE_CATEGORY as A, B, C, D, then the respective rates of Table SAM_ITEM_MAS should come point: P1_ITEM_RATE.
  
  Date condition oredr does not work.
  
  Thank you
  
  Published by: 805629 on December 28, 2010 23:32

  Hello

  Have you tried running the item as dates using TO_DATE() values:

  select RATE_1
  from SAM_ITEM_MAS
  where ITEM_CODE =:P1_ITEM_CODE
  and  PRICE_CATEGORY=:P1_PRICE_CATEGORY
  and TO_DATE(:P1_ORDER_DATE,'DD/MM/YYYY') between "FROM_DATE" AND "TO_DATE"
  

  (change the date format string to match the format of the page P1_ORDER_DATE element)

  You should probably change the name of the field to something else that TO_DATE since it is a name of Oracle function - try DATE_FROM and DATE_TO start_date and end_date or something like that. Otherwise, you need to use double quotes, as I have indicated above

  Andy

• Reconfigured HP Data Replication Group does not present as a group of SRM data store

  Hello

  I configured in two data centers with an EVA4000 on the source site and an EVA4400 on the destination site, countered with Continuous Access EVA of SRM.

  I had replicated two EVA virtual disks (and ESX data warehouses) on the EVA4000 Source called EXCHANGE01 and EXCHANGE02 that have been configured in separate groups, data replication (named EXCHANGE01-GROUP and EXCHANGE02 GROUP) of the HP Command View EVA. These have been picked up properly by SRM as replicated data stores.

  So I decided that it would be preferable to not not two data stores more as a single unit and therefore re-configured continued access by removing the virtual disk EXCHANGE02 of its data replication group and adding as a member of a GROUP named EXCHANGE01. After that, the GROUP named EXCHANGE01 is fail-over for Command View EVA unit and contains EXCHANGE01 to virtual disks and EXCHANGE02. The problem is that when I use the "Rescan replicated storage" option in SRM, you can still see the two Datastores EXCHANGE01 and EXCHANGE02. As it is, I need to create two groups, one by the data store, while in reality a continuous access switch the two as a single unit. The MRS server has been restarted, the berries reread several times, and in fact the EVA4000 has been restarted.

  Two things, I guess. Am I right in thinking that SRM should report to the Group of data replication HP (despite the fact that he refers to it as a\ group data store)? If I am, is there a way I can fix it (preference to short to remove all the replication groups in Command View EVA, a new analysis in the MRS and re - duplicate records?

  I have attached two screenshots - one to SRM showing the list of groups of data store after a new analysis and the other from Command View EVA, showing the Group of data recovery

  AX

  Hi Bob.

  The term SRM data store group is intentionally generic because MRS. support many different providers, and all could use a term "Replication group" as EVA does. If MRS. may correspond to a data store that was created on a LUN that the one being replicated is returned by the adapter, it considers that the store of data as being replicated. It's the storage provider for code adapter for return information LUN appropriate to their table - if you look at the SRM newspapers you will see EVA adapter returns each LUN replicated individually with no information about the relationship of Group of replication at all, so it would be impossible for SRM to have knowledge of this relationship as well.

  Although the LUN in a replication failover as one group power group, they can be taken individually for use during the test of SRM, so maybe it's one of the reasons why HP choice to list each ONE separately.

  In all cases, you have several alternatives: one is to keep your existing environment and configure two groups of protection; on the side of recovery, you can set up a restoration plan unique to switch both of these groups; In addition, you may have configured 2 other recovery plans, one for each protection group, which would be only used for the test, and which would test each LUN and virtual machines on it individually - this could reduce the load on the DR ESX servers during the test rather than to test simultaneously. Of course, you can create a single LUN as well and that of course would make the theoretical discussion - it could be better if your virtual machines must be tested together because the application dependencies.

  You might consider following up with HP if you want more insight as to the relationship of EVA "Replication groups" viz SRM, which is why they chose to not to expose information to the replication group.

• Data store space used not maching between VMWare and 3PAR

  Hello world

  I have a strange behavior between our environment VMWare and 3PAR storage system.

  I checked each data store of our cluster and for each of them, the space used in vSphere Client does not match the size of the user 'used' their volume associated with 3PAR.  The value displayed in VMware is higher.

  For example, our data store named DS03 has space around 1 TB in VMWare.  And when I checked in the Console of 3PAR, I see that the volume created for this data store has a size of the user 'used' 722 GB.

  While doing some research, I came across this post: ability to store data about the free space is not the same thing in VMware and 3PAR

  But the problem I encounter is quiet different. It's the opposite. I do not understand why the displayed value is higher in VMWare...  We are also running vSphere Server version 5.1.0

  Any advice? Ideas?

  Thank you very much.

  It's the ASIC 3PAR inline zero detection function stripping zeros of incoming data until they land on the disc. Www.3parug.com try this happens a lot.

• Apple TV (4th Gen) App store (Singapore) does not work after last update tvOS 10

  I tried a hard reset or empty everything and re-updated my Apple TV.

  However, I am always faced with the same problem to have 'white' pages or does not respond to 'Top Charts', 'Categories', 'Search' and 'purchased apps. The only page I can access will be the page 'recommended '.

  Just tried a restore through iTunes. It always behaves the same. I have also this checked the dealer NuBox apple their game demo is having the same problem as well.

  Can we all here in Singapore with the same generation of gen Apple TV 4 having this same problem after TVOS 10 updated? Would it be a bug in the new TVOS?

  I have exactly the same problem of hv too... apple told me something wrong with Apple TV Apps Store for some regions, including Singapore.   Waiting for hotfix

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.