Data tracing < double > AnalogWaveformCollection on the WaveformGraph in Windows Form

Similar Questions

• Data Execution Prevention (DEP) prevents the update of Windows running?

  I know that you can turn off DEP for specific programs, but when I tried to do this with Windows Update I got a pop-up that said "this program must run with Data Execution Prevention enabled. You can't turn off DEP for this program. "So how I turn off DEP, or circumvent this rule to update Windows in need of DEP?

  Hello

  1. who is the antivirus installed on the computer program?

  2. Once you get this error message?

   
  3. have you installed Service Pack 2 on the computer?
  Data Execution Prevention (DEP) is a security feature that protects against viruses and other security threats by analyzing your programs to make sure that they use the system safely memory.
  If a program does not run correctly when DEP is enabled, check for a compatible version of the DEP program or an update from the software publisher before you change your DEP settings.
  I suggest the steps and see if it helps

  Method 1: Clean boot

  Put the computer to boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Check whether or not the error appears.
  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Run a virus scan on your computer.
  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

   
  Method 3:
   
   
  I suggest you to activate the automatic update IT and check with the question:
   
  Turn on automatic updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off

  Choose the option install automatically recommended update

   
  See also:
   
  Data Execution Prevention: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions
   
  I hope this helps.

• By selecting the vector shapes in mode traced that go beyond the edge of hidden form?

  Hi all

  In Adobe Illustrator, I often receive works of art which has the art of "junk" hidden in a hidden form. However, this art of the Junk extends beyond the hidden form and is visible in preview/trace mode. How to choose junk art WITHOUT having to expose everything?

  I have attached a very basic example. Usually, I have large files with vector patterns complex that add thousands of unnecessary points that are hidden in the mask.

  Ideally, I would like to be in preview/trace mode and simply select the useless pieces of art and remove them to clean the file better.

  

  Double-click to edit inside the shape using the Mode of insulation, or simply use the lasso tool or the direct Selection tool to select the areas you want to remove, and then remove them. Don't hit delete twice, or it will remove the entire shape grouped/hidden.

• [11g] ORA-31061/ORA-19202 - how to insert data xmltype table/validation of the schema (just well formed)

  Hello

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Here's the demo program:

  ==============================

  create a global temporary table GTT_Test(data xmltype) validation delete rows;

  - and run this

  declare

  v_data xmltype.

  Start

  -It does not work

  /*

  v_data: = xmltype ("< itf:meta > < node / > < / itf:meta > '");

  */

  - but it works

  v_data: = xmltype)

  XMLDATA = > ' < my: meta > < node / > < / my: meta > ',

  schema = > null,

  validated = > 0,

  correct = > 1);

  - but try to insert into the table in the same way fails again:

  insert into GTT_Test (data)

  values (xmltype)

  XMLDATA = > ' < my: meta > < node / > < / my: meta > ',

  schema = > null,

  validated = > 0,

  correct = > 1));

  end;

  ==============================

  
  

  It translates errors ORA above and suspicion: "prefix 'my' is not declared".

  
  I need to create the TWG somehow different to accept without diagram validation?

  
  

  -Thanks!

  
  

  Kind regards

  Frank
  

  Hello.

  Try to declare to your XML namespace.

  for examplehttp://youaddress">

  "If you don't have a schema, try xmlns: my =" "(espace en blanc)."

• When will support for the end of Windows Vista?

  When will support for end of Windows Vista, or is there a delay?

  [Original title: Microsoft support]

  Long ago the date has been set.

  See this web page: the lifecycle of Windows form

  Quickly, you should note that Windows Vista with Service Pack 2 installed will continue to receive "Extended Support" (free updates every month) until April 11, 2017.

• How do I finalize the dvd with Windows 7?

  Hi anyone know how to finalize a DVD data (format mastered) burned with the Explorer of Windows 7? From the link below that looks like Windows 7 would only close the session, but not finalize the DVD, and I see no option for this. I want to finalize the DVD, so no files will be able to add to the disc.

  http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD

  If it is not supported by Windows 7, is there any 3rd party software that can finalize the DVD burned with Windows 7 ISO image format?

  Why not use ImgBurn it's free:

  http://www.ImgBurn.com/

• All my data have doubled and the lines are slightly compensation and overlapping. Unusable.

  All my data have doubled and the lines are slightly compensation and overlapping. Unusable. How to restore the distorted view course content?

  Hello Arnold,.

  A screenshot of the upper-left corner of your document could help the issue. Include as much as in the example below.

  If this section of the table does not display data "doubled and shifted", provide a second screenshot of a section of the same size, showing a sample of the data in question.

  Kind regards

  Barry

• What is the minimum value for the data type double?

  ... a more academic question: what is the minimum value of the data type double? I thought 'double', it is the 8-byte IEEE standard and what I remember, it's + - 1.7E + - 308.  The more different number of 0 should be 1.797E - 308.

  This is why I was a little surprised when I looked at the data output of my calculation of CVI, where I found the numbers with exponents of E-319 or E-324 as the smallest value...

  But I'm sure there's an explanation :-)

  Thank you for sharing with me,

  Wolfgang

  The largest number is indeed the order of + 1.7E + 308; There are a smaller number of - 1.7E + 308. Note that this is in fact the most negative number, which is the smallest by some reckoning. For the small beach of the Exhibitor, things get a little more complicated. 1E-308 can be represented with complete accuracy and resolution, but if you're willing to lose a few bits of precision, you can go down even further. For example:

  Double x, y, z:

  x = 1E-300;

  y = 1E7;

  z = x / y;               Give 1.000000000000000E - 307

  y = 1E8;

  z = x / y;               Give 9.999999999999999E - 309

  y = 1E18;

  z = x / y;               Give 9.999987484955998E - 319

  y = 1E23;

  z = x / y;               Give 9.881312916824931E - 324

  So, as you can see, values less than 1E-308 are possible, but they become increasingly more inaccurate and should not be relied upon.

  JR

• I installed the SQL 4.0 developer and repository installation was a success. But the tools-&gt; Data Miner-&gt; Make visible option is not enabled. Also when I double click on the data minor user login I get the message the montrela

  I installed the SQL 4.0 developer and repository installation was a success. But the tools-> Data Miner-> Make visible option is not enabled. Also when I double click on the data minor user login I get the message workflow repository data need to be stored as xml binary on databases of version 11.2.0.4 or higher. You want to migrate your data from worklfow binary storage?  WARNING: All sessions with the ODMRUSER role will be disconnected.  Client version: 12.2.0.17.29 Version: 12.1.0.1.0 the database repository Version: 12.1.0.2.1. I don't have an older repository. Please help me solve this problem.

  Try to create a data minor user account (for example DMUSER) using the script createuser.sql in the \dataminer\scripts directory.  Use this user account to connect instead of the anonymous account.

  Thank you.

• 8710: 8710 double scan from the ADF

  Please help me understand if the HP OfficeJet Pro 8710 supports the double scanning from the document feeder. In http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-4026ENUC.pdf , is the line: "breeze through with double scanning multipage documents and an automatic C1900 of 50 pages (a single pass double scan 8730/40 models).  How is - a scan a stack of documents recto / verso on a 8710?

  For comparison, consider how the 6700 manages.   (A) on the computer, open "Scan HP."  (B) select "ADF." (C) place a check next to "Scan both sides (duplex).»  (D) place up to 20 originals in the document feeder.  (E) click on "search". (The ADF feeds the originals in the scanner.  On the computer, a pop-up scanning HP says: "prepare to analyze the other pages of your two-sided document.  To analyze the other side of pages 1. Remove the pages from the output tray.  Do not change the order of the pages.  2. without turning the pages at the wire, turn and place them in the document feeder according to the landmarks of placement on the device. 3. click OK when you are ready. ") F) after placing the originals rotated in the document feeder, click on 'OK '. (The HP scanning software stores the scan on your computer.)

  @gregspinney

  The technical data sheet information in small print:

  3 the single pass 50 sheets, ADF automatic duplex is available with only models 8730 and 8740. 8710 and 8720 models have an ADF 50 sheets of double mechanical

  While scanning two-sided "single pass" is not available on the 8710, it should provide an automatic duplex scanning.  The leaves should go through the printer, print one side, flip and scan the second side.

  Printer:

  All-in-one printer, HP OfficeJet Pro 8710 range

  Full software features:

  File name: OJ8710_Full_WebPack_1881.exe

• How to get the last date of 3 days for the current month?

  Hello. Guy

  How to get the last date of 3 days for the current month?

  MY OUTPUT WOULD LOOK LIKE THIS

  JANUARY 29, 2016

  JANUARY 30, 2016

  JANUARY 31, 2016

  
  

  GUYS HELP ME / / /...
  

  SQL > select last_day (sysdate) - level + 1 double connect by level<= 3="" order="" by="">

  LAST_DAY)

  ---------

  29 JANUARY 16

  30 JANUARY 16

  31 JANUARY 16

• [if I double click on the photoshop icon it open but used lightroom is still], it worked before

  If I double click on the photoshop icon it wont open but lightroom doesn't always work, it was working before but just tried to drag a photo to it and nothing

  Hi mikeg84390073,

  Greetings.

  • What version of PS you use, is up to date?
    • Update of Photoshop
  • If she is up to date, try to open PS C - Program files - Adobe - Adobe Photoshop
  • If it is still do not work, reinstall Photoshop.

  Concerning

  Rohit

• Data are not filled in the Dimension according to the hierarchy

  Hi all
  
  I have a DIM_ITEM table with the following structure,
  

  ITEM_KEY      NUMBER(10,0)
  ITEM_NAME     VARCHAR2(50 BYTE)
  ITEM_SHORT_NAME     VARCHAR2(25 BYTE)
  ITEM_CATEGORY     VARCHAR2(50 BYTE)
  ITEM_TYPE      VARCHAR2(50 BYTE)
  ITEM_BRAND     VARCHAR2(50 BYTE)

  Below the data are met

  insert into dim_item values (1, 'Samsung 42 LED Television', 'Sam 42 LED', 'Electronic', 'Television', 'Samsung');
  insert into dim_item values (2, 'Samsung 530L Double Door Refrigerator', 'Sam 530L DD Ref', 'Electronic', 'Refrigerator', 'Samsung');
  insert into dim_item values (3, 'Samsung 32 LED Television', 'Sam 32 LED', 'Electronic', 'Television', 'Samsung');
  insert into dim_item values (4, 'Samsung 57 LED Television', 'Sam 57 LED', 'Electronic', 'Television', 'Samsung');
  insert into dim_item values (5, 'Samsung 75 LED Television', 'Sam 75 LED', 'Electronic', 'Television', 'Samsung');
  insert into dim_item values (6, 'Sony 32 LCD Television', 'Sam 32 LCD', 'Electronic', 'Television', 'Sony');
  insert into dim_item values (7, 'Sony 42 LCD Television', 'Sam 42 LCD', 'Electronic', 'Television', 'Sony');
  insert into dim_item values (8, 'Samsung 175L Single Door Refrigerator', 'Sam 175L SD Ref', 'Electronic', 'Refrigerator', 'Samsung');
  insert into dim_item values (9, 'Samsung 230L Double Door Refrigerator', 'Sam 230L DD Ref', 'Electronic', 'Refrigerator', 'Samsung');
  insert into dim_item values (10, 'Samsung 230L Single Door Refrigerator', 'Sam 230L SD Ref', 'Electronic', 'Refrigerator', 'Samsung');
  insert into dim_item values (11, 'Whirlpool 530L Double Door Refrigerator', 'WP 530L DD Ref', 'Electronic', 'Refrigerator', 'Whirlpool');
  insert into dim_item values (12, 'Whirlpool 1110L Double Door Refrigerator', 'WP 1110L DD Ref', 'Electronic', 'Refrigerator', 'Whirlpool');
  insert into dim_item values (13, 'Royal 3+2 Sofa Set', 'Ryl 3+2 sofa', 'Furniture', 'Sofa', 'Royal');
  insert into dim_item values (14, 'Royal 4+4 Sofa Set', 'Ryl 4+4 sofa', 'Furniture', 'Sofa', 'Royal');
  insert into dim_item values (15, 'TMT 3+2 Sofa Set', 'tmt 3+2 sofa', 'Furniture', 'Sofa', 'TMT');
  insert into dim_item values (16, 'TMT 4+4 Sofa Set', 'tmt 4+4 sofa', 'Furniture', 'Sofa', 'TMT');
  insert into dim_item values (17, 'TMT 4 Person Dinning Table', 'tmt 4P DT', 'Furniture', 'Dinning', 'TMT');
  insert into dim_item values (18, 'TMT 10 Person Dinning Table', 'tmt 10P DT', 'Furniture', 'Dinning', 'TMT');

  According to these data
  
  Samsung has TV and fridge
  Sony has only TV
  Whirlpool's refrigerator only
  
  I created the hierarchy in AWM
  
  1. all items
  2 article category
  3 point mark
  4. item type
  5. name of article
  
  When I keep my Dimension and display data, it displays as
  

    - All Items
      - Electronic
        - Samsung
        - Sony
          - Television
            - Samsung 42 LED Television
            - Samsung 32 LED Television
            - Samsung 57 LED Television
            - Samsung 75 LED Television
            - Sony 32 LCD Television
            - Sony 42 LCD Television
        - Whirlpool
          - Refrigerator
            - Samsung 530L Double Door Refrigerator
            - Samsung 175L Single Door Refrigerator
            - Samsung 230L Single Door Refrigerator
            - Samsung 230L Double Door Refrigerator
            - Whirlpool 530L Double Door Refrigerator
            - Whirlpool 1110L Double Door Refrigerator
      Furniture

  Nothing is there under Samsung. But the result to expect is,.
  

    - All Items
      - Electronic
        - Samsung
          - Refrigerator
            - Samsung 530L Double Door Refrigerator
            - Samsung 175L Single Door Refrigerator
            - Samsung 230L Single Door Refrigerator
            - Samsung 230L Double Door Refrigerator
          - Television
            - Samsung 42 LED Television
            - Samsung 32 LED Television
            - Samsung 57 LED Television
            - Samsung 75 LED Television
        - Sony
          - Television
            - Sony 32 LCD Television
            - Sony 42 LCD Television
        - Whirlpool
          - Refrigerator
            - Whirlpool 530L Double Door Refrigerator
            - Whirlpool 1110L Double Door Refrigerator
      Furniture

  When I change the hierarchy as
  
  1. all items
  2 article category
  3. element type
  4 point brand
  5. name of article
  
  AWM displays data such as,
  

    - All Items
      - Electronic
        - Television
          - Samsung
            - Samsung 42 LED Television
            - Samsung 32 LED Television
            - Samsung 57 LED Television
            - Samsung 75 LED Television
            - Samsung 530L Double Door Refrigerator
            - Samsung 175L Single Door Refrigerator
            - Samsung 230L Single Door Refrigerator
            - Samsung 230L Double Door Refrigerator
          - Sony
            - Sony 32 LCD Television
            - Sony 42 LCD Television
        - Refrigerator
          - Whirlpool
            - Whirlpool 530L Double Door Refrigerator
            - Whirlpool 1110L Double Door Refrigerator
      Furniture

  But the result expected for this hierarchy is,.
  

    - All Items
      - Electronic
        - Television
          - Samsung
            - Samsung 42 LED Television
            - Samsung 32 LED Television
            - Samsung 57 LED Television
            - Samsung 75 LED Television
          - Sony
            - Sony 32 LCD Television
            - Sony 42 LCD Television
        - Refrigerator
          - Whirlpool
            - Whirlpool 530L Double Door Refrigerator
            - Whirlpool 1110L Double Door Refrigerator
          - Samsung
            - Samsung 530L Double Door Refrigerator
            - Samsung 175L Single Door Refrigerator
            - Samsung 230L Single Door Refrigerator
            - Samsung 230L Double Door Refrigerator
      Furniture

  What exactly I'm missing here? Could someone please help me on this?
  
  NOTE: The data I used here are just fake and learning goal
  
  Thanks and greetings
  M trehout

  The problem is that the definition of parent is ambiguous to some of your members. A good example of this is the 'Refrigerator' Member, appearing under the Samsung and whirlpool in your data set. There will be only one member named refrigerator in the AW, and it can have only one parent. In practice, is to choose the Whirlpool code, but my guess is that the choice is arbitrary and you might get different answers every time.

  The solution is to make the Member have unique names-'Refrigerator-Samsung' and 'Refrigerator Whirlpool' say. You can do it in the data set itself or in the map. Of the to in the mapping, you can map the level of "Item_Type" corresponding to an expression like that.

  DIM_ITEM.ITEM_TYPE || '-' || DIM_ITEM.ITEM_BRAND
  

  (Make sure you get the size before reloading with new data, since otherwise, the former members will remain).

• start date for each week of the month

  Dear members
  
  How can I find double, the start date of each week of the month in a year.
  beginning of the week is the word "Monday".
  
  
  year month week day date
  ----------------------------------------------------------------------------------------
  Monday, January 3, 2011 JAN 1, 2011
  2011 2 JAN Monday, January 10, 2011
  Monday, January 17, 2011 January 3, 2011
  JAN 4 2011 on Monday, January 24, 2011
  2011 to January 5 Monday, January 31, 2011
  
  
  Thank you
  
  teefu

  Hello

  You can use this:

  with t as  (select to_date ('01/01/2011', 'DD/MM/YYYY') start_date from dual)
  select  date_calc
  from (
          select  start_date,
                  (level-1)*7+trunc (start_date , 'D')+1   as date_calc
          from t
          connect by level <=53)
  where trunc(date_calc,'YYYY')=trunc(start_date,'YYYY') ;
  

  Kind regards
  Sylvie

• date is not fitting on the page of report

  Hi friends,
  
  I created a form page with the report, in which insertion I made in the forms should take into account in the report
  
  In my form, what are the corresponding fields
  
  Requested by:
  start date:
  status:
  priority:
  
  My requirement in the form is when I logged on the form for an entry page, the field start date should automatically have the current sysdate and I need to fill the other fields to make an entry in report...
  
  I also brought the corresponding sysdate in my form date field beginning when I opened the form, but the problem for me, it's that the only departure date field is not get inserted in my table, except this field than all the other field is get inserted...
  
  How I did the sysdate appear in means of start date field,
  
  Under the source of the field point date beginning, I made the following changes
  
  Source: replace an existing value in a session state
  source type: static assignment (equal to the source value)
  source of value or an expression: I gave the following sql query as
  
  Select sysdate double;
  
  shortly after this change, when I login in the application, to put an entry form
  
  sysdate is automatically displayed in the start date field, but is not fit in my report, shortly after I give create button on my form page...
  
  For wat to leave is not inserting... If any other string available for the passage of sysdate in apex
  
  If he can afford so... share with me friends...
  
  Thank you
  Harry...
  
  Published by: implications on November 20, 2010 03:18

  Hi Harry,.

  First of all, make sure that your dateitem has a 'Format mask' - for example, DD/MM/YYYY

  Then, need to be addressed "Source":

  Source: replacement always, value that exists in session state
  Source type: column database
  The source value or expression: (enter the name of the column - for example, HIREDATE)

  Then, in the 'Default' section, enter the following:

  Default value: TO_CHAR (SYSDATE, ' DD/MM/YYYY "")
  The default value type: PL/SQL Expression

  (Make sure that the format of date in TO_CHAR() function matches the format of date picker.

  For a value to record on the disc, the settings of the Source would be the above in general - words, you must specify that it is a database column and enter the column name of database as a Source value. Otherwise, Apex will not be able to save the data in this field.

  Thus, you must provide another way to enter during the date - and it is done by using the default settings. As long as the field is NULL, the default will apply. Once the field has a date, the default value is no longer used.

  Andy