data transfer and fingerprint

Similar Questions

• The Zire 31 data transfer and Tungsten E

  I am trying to get a Tungsten E to replace my broken Zire 31.  Can I easily sync my Contacts, calendar, data spending my Zire 31 office to the new office of Tungsten E and combined after installation of the software? or the installation of the new will scan all my existing data?

  Am hoping for a smooth transition without data loss.

  Thank you

  Click on the following link for the Web page of kb.palm.com for the article regarding the upgrade to a new device.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=12926

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/EMEA/tungsten/e/unlockedeu/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• allowed data transfer and list of programs__

  I am trying to install an online game that needs to access a server, when it load it just froze and did nothing. There suggestion was to ensure that he allowed to pass packets through the correct port and ensure that it was on my list of programs, how do I do and where I can find this list?

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/threads

  They will help you in Forum games above.

  And tell them the name of the game.

  See you soon.

  Mick Murphy - Microsoft partner

• Data transfer NI653x

  Hello

  We used the NI6534 card to transfer data from our system in a PC. He works on traditional pilot and DAQmx. We use handshanking calendar for data transfer. Recently, we want to increase the speed of data transfer and need to change the "timing" of the handshake to sample clock calendar (model IO in traditional version). We got it working using the traditional driver, but not by DAQmx. I always get an error code when you try to start the data acquisition. Code error-89129 - Terminal is not valid for the device. Here is C code to configure and start the map:

  DAQmxCreateTask("",&m_taskHandle);
  DAQmxCreateDIChan (m_taskHandle, "Dev3/port0_32", "", DAQmx_Val_ChanForAllLines);
  m_numofSampletoRead = 2000000;

  continue to generate samples up to the stop.
  bRet = DAQmxErrChk (DAQmxCfgSampClkTiming(m_taskHandle,"Dev3/PFI2",20000,DAQmx_Val_Falling,DAQmx_Val_ContSamps,m_numofSampletoRead));
  specify the size of the buffer
  bRet & = DAQmxErrChk (DAQmxCfgInputBuffer (m_taskHandle, BUFFER_SIZE));

  Once he went to configuration and once called the DAQmxStopTask (m_taskHandle) function, he returned this error code I mentioned above.

  With respect to the traditional version, I just added a call to the function below and it worked fine.

  If (!) () status = DIG_Block_PG_Config (m_deviceNumber,
  m_group,
  1, / * enable the generation of model using REQ edge lock * /.
  1, / * REQ - REQ external source * /.
  -3, / * time - base 50ns, it is an internal clock * /.
  1, / * interval REQ * /.
  ((((i16) 0))) / * turn on or off the switch * /.

  Can you help me how to make it work with DAQmx? Thank you.

  Thank you, James. The example of aid. The function I called:

  DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle, "/ Dev3/PFI2", 10000.0, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 1000));

  I missed the first slash highlighted in RED.  I've was allowed past this function call but got stuck at the next function call, DAQmxErrChk (DAQmxStartTask (taskHandle)), that me cheated.

  Thanks again for your help.

• Subvi in an another Subvi data transfer

  Hi all

  I have a question,

  -Does anyone know how it is possible to transfer data as a double of a Subvi to another sub - VI on the same project file with arthemetrical calculations and encodings in the screws.

  I don't want to use local or global variables. How to use refnum? Can someone help me?

  Thank you

  Alan.

  Hi Alan,

  It's very simple. Just wire the data on an indicator in your first Subvi, then make an exit using the connector pane. Call the two SubVIs in your main program to where you want that data transfer and output of wire to an entry in the other Subvi.

  Another option is to call the second Subvi in the first and just wire the data entry.

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards

• Slow data transfer between computer and HP Laser Jet 1320n

  I recently bought a laptop with windows 8.1 and successfully connected to 1320n times via LAN and wireless networks. Problem is when I try to print .pdf files, data transfer from my computer to the printer seems very slow and that's why it takes several minutes to print 10 pages. On the print window of my system, it tells me the data to transfer a file from pdf page 14 are about 75 MB.

  My questions are:

  1-is-normal this size of data?

  2. What can I do to increase the transfer speed?

  Thank you in advance.

  H.A.

  Thank you very much for the reply.

  I hae has solved the problem by installing the drivers that are on the product page (I was using the Windows drivers when I had the problem). Everything works as it should now.

• PXI data transfer between OTN and FPGA

  Hello

  I have a DAQ card in my PXI and a FPGA 7813R map.

  The problem is that I send sample waaveforms of the data acquisition card to the FPGA card (which only has digital i/o) to launch my control on the FPGA. When I generate a sine wave of 50 Hz in the OTR to simulate a measured signal and send it to the FPGA through the controls in the Panel before (http://zone.ni.com/reference/en-XX/help/371599G-01/lvfpgaconcepts/pfi_data_transfer/) the signal happens on the fpga is much slower than 50 Hz indicating this folding is (it takes too much time to send the data). I tried to use this method of data transfer because my control requires only the more recent data, but it also has a phase lock loop that requires the data arriving at least resemble the original signal. Another criterion is that the control to data more up-to-date as possible. I know there is another option of the use of DMA FIFO, but I use it because I thought it would take more time to send the data, because each value must be sent.

  My questions are:

  I go about it the correct way? I know that there is the FPGA cards with analog inputs. I buy one it is because I have a large amount of differential analog inputs (20 +)

  Is there a quick way to transfer data to the FPGA. (I have converted all the FXP data before writing to the FPGA)

  Hi Jagwa,

  You should not have to synchronize the RTOS loop that written information and the FPGA VI which is read.  Instead, you can simply use a FIFO.  In RT, you can write all the data points for the FIFO, and then you can extract them one at a time on the FPGA VI and use them as needed to control functions.  In this way, the only time you need to worry about stopwatch the FPGA VI to get out the data to mimic 50 Hz.

  Kind regards

• Transfer all of the data files and program from old computer (Vista) to new computer (Windows 7)

  I've been using a Dell xps 420, 32-bit Vista since 2008. I just bought a new Dell xps-8700, 64-bit with windows 7 preinstalled. I would like to transfer all THE DATA, SETTINGS AND PROGRAMS from my old computer to the new computer. I bought a cable easy transfer of Dell for windows, xp, vista, windows 7 and 8. I read somewhere that the method of cable will transfer all my installed programs. Is this true?

  Can someone give me the better, easier and faster method available. At least give me a step by step procedure for this task.

  I am 81 years old and not too computer savvy. Any help you can give will BE appreciated.   bobnancy

  From Internet Explorer

  Original title: Transfer all data and program files from old computer to the new computer

  I've been using a Dell xps 420, 32-bit Vista since 2008. I just bought a new Dell xps-8700, 64-bit with windows 7 preinstalled. I would like to transfer all THE DATA, SETTINGS AND PROGRAMS from my old computer to the new computer. I bought a cable easy transfer of Dell for windows, xp, vista, windows 7 and 8. I read somewhere that the method of cable will transfer all my installed programs. Is this true?

  No, it won't, it will transfer personal files and settings. You will have to reinstall your applications from the original installation files or install CDs and DVDs.

  Can someone give me the better, easier and faster method available. At least give me a step by step procedure for this task.

  If you really want to move your applications to the Vista computer, you will need to buy a commercial programs such as Laplink PC Mover that will allow you to move your programs:

  Laplink PCmover® | Laplink.com

  I am 81 years old and not too computer savvy. Any help you can give will BE appreciated.   bobnancy

  From Internet Explorer

  Original title: Transfer all data and program files from old computer to the new computer

• Can I partition my C: drive without data loss and transfer user files to the new?

  I have a pre-installed windows 7 Home Premium(64-bit) on a computer laptop DELL studio. Unfortunately, it only has drive C and no partition at all. Therefore, it is possible to create partitions without risk of loss of data (System and user)? If so, is it possible to transfer all the files from the user to the new one system files and all stay in C.

  Rodney

  Partitioning itself has no impact on performance. You can get slightly better performance by how you distribute folders and files on a partitioned system but I would not partition to eliminate program freezes. It's the wrong way to tackle the problem.

  There are many reasons for freezes.

  Freezes occur mainly because the task or tasks require more memory or one that is immediately available to the capacity of the CPU. The solution is to increase what is available or to reduce demand. You can do both. How to do this is much more complicated. It depends on what element of hardware is causing the bottleneck. If memory is limited, it can be simply remedied by adding RAM. If the problem is the capacity of the CPU, you will find that increasing capacity is often not practical to replace the often average CPU processor replaced motherboard, operating system and other equipment doing expensive exercise... Change the hard drive could help, but switching to an SSD is also expensive. If the processor is the problem, then demand reduction is often the way to go.

  If you are resolved to reduce the demand, it can significantly improve the performance if you delete the browser add ons such as toolbars and search engines that are not necessary. Most of the time when you install the new software you will find recommended add ons. You must learn to say no when they duplicate what you already have. Add on can hide malware, including spyware, reports how you use your computer. Do not believe the bland statements like 'works quietly in the background. It's more than one spin. Multitasking may be good, but it can provide performance problems. It translates into a surplus of supply over demand.

  Another cause of gel can be for lack of material, most commonly, the hard drive, RAM wiring associates or defective. These flaws are often easy to detect, but not always the case. You must also make sure that you have the latest version of the BIOS and motherboard drivers. They can be updated on a brand new computer if the person selling you the computer is not updated immediately before restore you the computer.

  If Frost always involves the same programs uninstall and reinstall the program, and you make sure you have the latest updates. You can also use Google to find out if others have or have had the same problem. Focus your search by using keywords, descriptions of the extracts may event viewer and limit the results to those within 12 months.  Many programs have dedicated forums where other users may be able to help.

  A gel is often the result of a malware infestation. In this case do not rely on your existing software. You need to perform analyses with software like Malwarebytes and Superantispyware. Perverse freezes may be caused by security software. Norton and McAfee are known to be involved, in particular where the computer has limited the capacity of RAM and CPU.

  Poor or no maintenance will result in poor performance. You must have a maintenance routine. This can include compaction (some e-mail programs) and should include the cleanup with cCleaner and disk cleanup and defragmentation. You must make sure that the partitions have at least 20% of disk space. You do not defragment SSDS.

  You must use the tools on your computer to look for clues as to what is happening. More you use, the more you understand what they say. The most useful tool is event viewer, although many users, it is difficult to interpret.

  You will find many sites on the internet promoting the use of registry cleaners and optimizers to maximize the performance of your computer. They are promoted by the spin and the hype. The truth is that their use causes finally grief when you use to reinstall windows to eradicate the mistakes of the system they have caused.

• Data transfer?

  Is to connect your iPad to a computer to transfer data to your iPad another way of data transfer such as an OTG device as a micro SD card?

  Thank you

  Depending on the data type and the application that you use to access this data, you may be able to save to DropBox or dedicated application servers back up (if it is a characteristic of soft offers).

  SanDisk made a series of key USB Wifi active. However, due to the nature in iOS sandbox, there are many limits on what you can switch to the player. Everything happens through the application owner.

• Assistant (DTA) data transfer transferred some of my Contacts, none of my calendar or Memo files

  When I ran the DTA at 5:30 PM PST yesterday, he said he had picked up ~ 4100 chronogram (Palm Desktop 6.2), with the exception of 20 files of calendar, which was very good.
  
  On my old Palm device, he said I had ~ 1300 address book records, ~ 2000 Date record book and ~ 850 record Memo. So when the DTA said he had picked up ~ 4100 records, which seemed all right.
  
  When you are prompted on my pre, I chose to sync my data with Google.
  
  Immediately after this one-time transfer process, I checked my pre, and there is no record of my old Palm Desktop Contacts, calendar, or PRE memos. I thought that I should wait to see what happens.
  
  About 7:30 PM PST yesterday, slightly more than half of my Contacts has appeared in Google Contacts section 'My Contacts' (725 total) and on my pre. The same recordings were in Google Contacts and on my Palm Pre. Furthermore, none of my calendar or Memo files had been transferred more to my pre or Google (for the calendar).
  
  I thought that maybe the data transfer was still running, so I waited all night.
  
  Since this morning 9:45 AM PST, nothing has changed.
  
  My Pre and Google seem to have incomplete data:
  -slightly more than half of records from address book Palm Desktop 6.2 made to my pre / Google
  -any of the records in Palm Desktop 6.2 Agenda made my pre / Google
  -any of the records in Palm Desktop 6.2 memos made my pre / Google
  
  SUMMARY: I'm extremely frustrated. The only thing that I have always enjoyed with Palm devices has been the opportunity to upgrade to the new Palm devices and carry my existing data. The one-time transfer of DTA to pre process is very buggy. Somewhere after the DTA extracts data from my Palm Desktop (~ 4100 records), most of these documents have been lost. It is a horrible customer experience.

  I did some online research, and the author of the following article also fell on a similar problem:

  http://blog.Treonauts.com/2009/06/Palm-pre-sync-solutions.html

  I have tested and verified that when I create a new record on my pre calendar, he gets sync would correctly in Google Calendar and vice versa (new record created in Google Calendar sync does get would be my pre). It is very good for new data. But what of my thousands of existing data records? All these anniversaries, critical telephone numbers, addresses, etc.?

  Before this experience Pre DTA, I've that Palm had their pretty solid synchronization architecture, while the Apple iPhone synchronization architecture (via iTunes) was poor. But at least iPhone na not lose all records along the way.

  So I figured out how to get all my Contacts to load into my pre.

  Initially, I tried to transfer my data using DTA to Google instead of Palm profile. Several times I tried to run the DTA to transfer my contacts from Palm Desktop 6.2 to Google contacts. Whenever I tried to do, at some point, sync Google contacts folders would stop permanently, until all records have been transferred to the course. You can find out how many records have been sync'd to a given pre Contacts by clicking on Preferences & accounts by clicking on the account. You will see the number of contacts.

  So I decided to try to use the Palm profile as the storage for my Contacts and calendar, and all my Contact records (total 1372) was migrated successfully on the Meadow

  The pre now displays contact records in my pre Contacts as I expect: I see the files I transferred over my Palm Desktop. And because I added a Gmail contacts, Gmail addresses friends get "linked" to the corresponding Contacts automatically.

  Summary: my recommendation is that, for the DTA transfer process, you choose to store (backup) your Contacts (and calendar) on the Palm profile. Of course, the downside of this approach is data that has been created on your Pre will not be displayed in Google Contacts and Google Calendar. Of course, you can choose to add your Google accounts on your Pre to your Contacts and calendar, which is what I did. This makes the Chronogram of your Gmail contacts and introduce you to Google Calendar on your Pre. For example, I added the calendar we vacation on Google Calendar. And now these holiday appear on my Pre calendar.

  Message edited by edweirdo 08/06/2009 11:47

• Sudden slow data transfer

  Hello

  I am happily using my 3 GB Time Capsule for the last 18 months with no problems. I use it almost exclusively as data storage for my Plex server. I use it wirelessly to my Macbook Pro 2014, in the same room.

  Yesterday, without change to explain it, it has become very slow to transfer files to it.

  

  I am at a loss, as most of the solutions I looked for people who have had problems of speed from the beginning, mine was a sudden appearance.

  Speeds do not seem to affect my streaming quality that I can still watch a 1080 p 5 gb + video file without stuttering or offset. The problem is isolated to the data transfer it seems.

  Any suggestions where to start?

  I use it almost exclusively as data storage for my Plex server. I use it wirelessly to my Macbook Pro 2014, in the same room.

  The plex server is connected by ethernet?

  Speeds do not seem to affect my streaming quality that I can still watch a 1080 p 5 gb + video file without stuttering or offset.

  It would be difficult to know if streaming is more... and more through your Macbook wireless...

  So I just need to know what is connected by ethernet and what is connected by wireless.

  Wireless is seriously affected by a number of things. So I guess that the first test is to connect the laptop to the TC by ethernet and make sure that it works very well. If your ethernet Mac buy a crush on ethernet card... a necessity, in my humble OPINION... as trying to fix wireless more wireless resembles sawing off the branch that which you are sitting.

  If you can determine the network of the question... Then we can do the simple things...

  Run the diagnostics wireless...

  Just restart the entire network, which I am assuming that you tried but did not mention.

  Simultaneous copy of a file on the hard drive while also streaming can also be stressing the TC... If the tests should be carried out without any other use of disk passes.

• How to calculate the rate of data transfer if I know that the total number of samples/s?

  I'm looking to set a PXI system for measurement of County at high speed, routes, while that controlled remotely via MXI - 4.  How can I be sure that the controller is capable of rapid data transfer quite seen the number of channels and frequencies of sampling provided?

  I think I figured this out, but maybe someone can save me.  For the task at hand, I will have a PXI-4496 and four PXI - 6143 s all 32768 samples/s sampling.  4496 is 24-bit, and 6143 is 16-bit.  Thus,.

  bits of samples/s/channel x 24 16 channels x 32768/8 = 1 048 576 bytes / s

  +

  32 x 32768 samples/s/channel x 16 bits/8 channels = 2,097152 bytes/sec

  =

  3 145 728 bytes/s, or exactly 3 MB/s.

• If possible in DAQ 6009 bidirectional parallel data transfer?

  want to APR DAQ6009 interface via bus 8-bit parallel, but I need to be bidirectional thus stuck at this point since m nt if possible data transfer bidirectional or not

  The 6009 has two-way DIO.

  However, I don't think I would be wasting my time trying to implement a protocol of communication using EID on the 6009 - this is all software timed instead of timed material, which means that your rate will be very slow)< 10="" hz)="" and="" very="" nondeterministic,="" making="" communication="" protocols="" very="" difficult="" if="" not="">