Database changes in preperation for vCenter 4.0?

Similar Questions

• Change password Admin for the Horizon

  I'm trying to change password admin for vCenter server to the horizon. I added the new account in vCenter, but everytime when I'm changing the vCenter server settings, I get the following message: due to a bad user name or password.

  I don't know I'm using the correct user name and password.

  Anyone had the same questions and know how to solve?

  Thank you in advance,

  Serge

  Try to add it like this: domain\user

• How to change the MOB OpenManage integration for vCenter Server registration

  A few months back, I've updated our installation of the vCenter for v2 plugin, now called OpenManage integration for vCenter Server. When you perform the upgrade, we have kept the old base done vs a new installation. During the upgrade process, we deployed the new device under a new name of the computer.

  Everything works well except that we noticed an annoying thing. Registration of the plugin is the former name of the server instead of the name of the new server-oriented. It is validated by looking at the web page MOB: http://vcenter Server/fmt drilling then down through:

  Content--> Extension Manager--> extensionList ["com.dell.plugin.OpenManage_Integration_for_VMware_vCenter"] --> server--> URL string

  The configuration of the appliamnce shows the correct new name of the device and the administration console is accessible via the new name for the device. The only place where we see the old name of the device is in the MOB config.

  We tried to remove the plugin and added, but still cannot change the value of server URL to reflect the new name of the device. Until we solve this problem, I work around the problem by keeping just the DNS entry for the old name of the server in DNS.

  Anyone know who to change the property MOB for the URL of the server?

  I solved the problem.

  I found the following article that shows how to upgrade the extension. I just cut and paste into my current values with the URL of update and now all is good.

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2060127&sliceId=1&docTypeID=DT_KB_1_1&dialogID=236869583&StateID=0%200%20236885165

• How to manually change the ports for HTTP on the server vCenter Server

  Hello Experts,

  We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.

  So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.

  So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.

  So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.

  Suggestions forward. This problem is with the production servers.

  Thank you

  Karan

  This has been resolved... port has been changed manually and works very well.

• change password of oracle database and reconfig coe for the new password

  I want to change the password for the database for the security issue, but I want to know what configuration should I make in my content on the web Center?

  Hello

  Assuming it as 11 g it is 2 places where change is:

  1 WLS Console - Services - Pool of connections to Data Sources - SDR-

  Here the password section must be changed.

  2. navigate to /ucm/cs/bin and run the system properties applet - database and there. This is necessary if you use the standalone applets like IdcAnalyzer etc.

  Thank you

  Srinath

• Best database for vCenter Server 4

  I was wondering what would be the best recommendation for vCenter database server SQL 2005 Enterprise or Standard 64-bit or 32 or 64-bit SQL 2008 Standard or Enterprise. I am trying to build a benefits and disadvantages. I have the database compatibility matrix, but I wondered about the characteristics that could give vCenter that it may not have the capacity. SQL 2008 gives any advantage that 2005 is not that someone has seen or knows. I just want to understand the best database to go with any information about this would be very useful to make my decision. I have difficulties to find advantages and disadvantages to decide what data to go with vCenter

  Hello

  in my opinion, it depends on your deployment, at the present time that I deployed SQL Server 2008 and use with my VCenter 4 so far it was good my environment is relatively low 88 VMs, it's the configuration I use:

  SQL Server 2008 SP1 STD x 64

  Windows Server 2003 R2 SP2 x 64 STD

  I did not notice my old previous deployment if performance:

  SQL Server 2005 STD x 86 SP3

  Windows Server 2003 R2 SP2 STD x 86

  back then my environment was still 35 VMs

  Kind regards

  AWT

• How to change the password for all users in the database

  Hi buddies!
  
  Could someone tell me how to change the password for all users in the database? I want to set the same password for all users.
  
  Thank you.
  
  Nith
  
  Published by: user645399 on March 1, 2011 14:23

  Write the file spooling
  as

  Make sure that all profiles has password_verify_function with a NULL value

  then

  Select 'edit user' | username: ' identified by ;' from dba_users;

  you will get the output... you just run.

• Change the password for the user of IOM database

  To change the password of the database user who created and the user run the prepare_xl_db.sh. I changed the < encrypted password = "true" > "false" and changed the password in the xlconfig.xml and restarted the application server, but I can not connect. I get the error below. -What else is necessary?
  
  ERROR, October 30, 2008 09:31:56, 265, [XELLERATE. SERVER], class/method: XLJobStoreCTM/initialize some problems: error connecting to the database. Please check if DirectDB is correct in the Xellerate configuration file.
  FATAL, October 30, 2008 09:31:56, 265, [XELLERATE. PLANNER], QuartzSchedulerImpl-constructor for Exception
  org.quartz.SchedulerConfigException: failure occurred during recovery of employment. [See nested exception: org.quartz.JobPersistenceException: could not get the connection to data source 'noTXDS' DB: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)]
  ) [See nested exception: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)]
  )]]
  at org.quartz.impl.jdbcjobstore.JobStoreSupport.initialize(JobStoreSupport.java:429)
  at org.quartz.impl.jdbcjobstore.JobStoreCMT.initialize(JobStoreCMT.java:131)
  at com.thortech.xl.scheduler.core.quartz.XLJobStoreCTM.initialize (unknown Source)
  at org.quartz.impl.StdSchedulerFactory.instantiate(StdSchedulerFactory.java:753)
  at org.quartz.impl.StdSchedulerFactory.getScheduler(StdSchedulerFactory.java:885)
  at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.initialize (unknown Source)
  to com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl. < init >(Unknown Source)
  at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.getSchedulerInstance (unknown Source)
  at com.thortech.xl.scheduler.core.SchedulerFactory.getScheduler (unknown Source)
  at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.startScheduler (unknown Source)
  at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.init (unknown Source)
  at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2371)
  at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4824)
  at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4748)
  at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4936)
  at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1145)
  to com.evermind.server.http.HttpApplication. < init > (HttpApplication.java:741)
  at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
  at com.evermind.server.Application.getHttpApplication(Application.java:570)
  to com.evermind.server.http.HttpSite$ HttpApplicationRunTimeReference.createHttpApplicationFromReference (HttpSite.java:1987)
  to com.evermind.server.http.HttpSite$ HttpApplicationRunTimeReference. < init > (HttpSite.java:1906)
  at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
  at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
  at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
  at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
  at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
  at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
  at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
  at java.lang.Thread.run(Thread.java:595)
  * Nested Exception (the underlying Cause).
  org.quartz.JobPersistenceException: could not get the connection to data source 'noTXDS' DB: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)
  ) [See nested exception: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)]
  )]

  During the IOM installation datasources are created to access the database.
  Then when you change the password for the database user, you must set the password in the data sources.

• Change the path for every 24 hours

  I need a code to vi to change the path for each new file created. The file in the path will be a new file. Please please answer me.i don has an idea.

  The pseudo-code for this is

  IF (NEW FILE IS AVAILABLE IN THE FOLDER)

  {

  PERFORM THE CALCULATION IN THE OLD FILE;

  CHANGE THE OLD FILE INTO THE NEW FILE;

  }

  ON THE OTHER

  {

  LOCATE THE NEW FILE;

  }

  Please, please make the answer.

  As well as the tutorials in the link rules mentioned, Sam notes where it says don't not to communicate directly with users.

  You're going to have these, I think:

  

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• First Cisco VIEW - change the password for the admin GUI of CLI

  Hello

  We had someone install an instance of VIEW with the Vmware EGG file, but it seems that they never take the GUI password (admin) during the installation phase.

  Does anyone know the process to re-run the configuration script or to change the password for the admin of the SSH session, so we are able to connect to the GUI?

  Thank you

  Andreas

  Hi Andreas,

  Sorry, that I was not able to respond until the EGG has been redeployed, however, it is possible to change the CLI from the server admin password.

  1 SSH on the server VIEW

  2 cd to/usr/local/cisco/dcm/fm/bin

  3 «./addUser.sh--help' to view the syntax of the command.

  The syntax for the addUser.sh script is «./addUser.sh .  The adduser script to add new accounts to users or change the password for the existing user accounts.

  4. to change the admin password, the command should look like this,

  «./adduser.sh admin .

  If you have forgotten the password for the database, you can find it in the file, usr/local/cisco/dcm/jboss-as.7.2.0-Final/standalone/conf/postgres.cfg.xml.  Use the 'cat /usr/local/cisco/dcm/jboss-as.7.2.0-Final/standalone/conf/postgres.cfg.xml' command to print the contents of the file to the screen.

  -Eric

• How to change the servicename for 12 c APEX?

  I used to have Oracle XE, but now I have installed Oracle 12 c.

  I am also running Application Express 4.2.4.00.08 and found that the db.servicename = xe

  
  

  How can I change the servicename for Oracle 12 c?

  Thank you

  Hi 948287,

  948287 wrote:

  Also, if I changed the use of 12 c, does that mean I have to recreate all the tablespaces, nine datafile?

  I currently have 2 applications running with XE.  Will they be automatically transmitted to 12 c so I re-run? or do I have to import DBF files?

  Thank you

  Yes, you can not transfer the APEX (APEX metadata) instance from a database to a different database. You must install APEX in Oracle Database 12 c.

  You can export and import applications of databases to a different database.

  See the thread next where it is explained in detail how to transfer APEX application and application data from one database to another:

  Re: Move a request APEX of a database to another database

  I hope this helps!

  Kind regards

  Kiran

• In the world, change the password for the connection properties?

  I use developer SQL to connect to several work areas and need to change the password for each of these months.

  Have a script that iterates through each of the database and changes the password.

  My problem is that I have to update all of my properties login for SQL Developer and have each connection updated to a new password.

  Short of manually changing each connection is possible for the global changes the password for these connections?

  Thank you very much

  No, but.

  There are password there lockers that allow you password auto - magically. The password is defined by the title of the window asking for the password. So if you held your passwords in 'the cloud', she would never put need up-to-date with SQL Developer.

  Is this really the same problem?

• How to change the 'Drive' for the BSO cubes (just like we do using "alter tablespace" for ASO cubes) using MAXL etc.?

  Hello team,

  I'm trying to make a backup copy of the cube by using the copy commands, BSO

  but after copy, I need to change the drive letter (for the data and indexes of the files) using MAXLs.

  I am able to do for cubes ASO using "Alter tablespace" i.e. for example, change "D:\" car ' to 'E:\. "for the tablespace files.

  I need to do the same for the BSO cubes? any idea?

  Kind regards

  Amit

  Don't forget while you can also change the drive it can't displace data. You would have to export the data, delete the database, change the disks, and then reload.

  For the actual command of MaxL watch the MaxL Alter Database command. You can add, dorp or set volumes of disk for ind and pag files

• SQL Server edition full for vCenter Server 6.0

  Hello

  Just learn that vCenter 6.0 does not support SQL Server Express.

  We intend to use SQL Server 2008R2 as the database of vCenter Server 6.

  We would like to ask for your opinion if we should use the full 32-bit or 64-bit SQL Server Edition?  For SQL Server Express, 64 - Bit is used, I think that we need to use 64 bits one, is this correct?

  Your opinion is requested.

  Just learn that vCenter 6.0 does not support SQL Server Express.

  The Windows 6.0 vCenter dropped the integrated SQL Express, BUT instead, it comes with a SQL database vPostgres shipped to replace it with similar restrictions. You don't need to install your own SQL server if you're ok with these limits. See the following article:

  vSphere 6 - clarify misinformation. VMware vSphere Blog - VMware Blogs

  Databases are supported for installing windows SQL 2008 R2, 2012 and 2014, Oracle 11g and 12 c as well as the possibility of using an embedded database vPostgres on windows vPostgres is limited to 20 guests and 200 VMs. Upgrades where SQL express is installed will be converted to vPostgres. The vCenter Server Appliance supports the vPostgres shipped to full scale, the host of 1000 and 10,000 virtual computers and is the database recommended for vCenter server unit. Oracle 11g and c 12 external databases are also supported for this version, look for these to drop in the future releases.

  It is also possible to keep an existing SQL Express DB when you perform an upgrade:

  VMware KB: Upgrade vCenter Server 6.0 without migration of the SQL database to vPostgres

  If you use your own SQL server to go with a 64-bit version and stick them on products VMware interoperability Matrices.

• Cannot find a service record for vCenter service with the host name "IP address"

  After upgrading to vCenter native 5.5 to vSphere Client device everything works, but not all orders for PowerCLI.

  After a command gives me error under VMware vSphere PowerCLI 6.0 Release 1

  Get-TagCategory: 13.07.2015 16:50:48 Get-TagCategory could not find a service record for vCenter service with host name 10.x.x.x

  In Zeile:2 Zeichen:1

  + Get-TagCategory

  + ~~~~~~~~~~~~~~~

  + CategoryInfo: ObjectNotFound: (:)) [Get-TagCategory], VimException)

  + FullyQualifiedErrorId: ViCore_InventoryServiceProxy_GetInventoryServiceInfo_NoVcRegistration, VMware.VimAutomation.ViCore.Cmdlets.Commands.Tagging.GetTagCategory

  does anyone have a solution or an idea for this problem?

  Best

  Marco

  I have exactly the same problem. Are there solutions yet?

  Best regards

  René

  Found the solution in the database (2127028).