database creation script

Similar Questions

• build the new database through scripts must understand Spanish character sets.

  Hello gurus,
  I need to some simple tips, a good chance for some quick points for you.
  I've never built a database to understand any different other than the U.S. English character set. I now have to build a database that will be used for characters Spanish-keyboards, etc. But I will use English to install 11g software. I just want to be able to show the Spanish characters in the data for the names of clients.
  I will create the database with scripts that I did to make the standard model for data files, control files, etc..
  Then I import in a dump that I did and that was done with American English character sets.
  The system is 11g (11.2.0.3.0) on Linux Enterprise Server 5.8.
  I thought I'd use the AL32UTF8 character set, but I'm not sure where to use them.
  My original test showed no Spanish characters for names of customers as the "tilda" or "sueano" (excuse my spelling). But in this case I did the exceptional for Spanish, I used only the construction of standard American English (no change in the file init.ora or original database create script).
  
  How can I adjust my settings file for the initial creation of the database model to be able to understand the Spanish character set and still be able to import my dump error-free file.
  
  EXAMPLE of a build script:
  
  CREATE DATABASE mynewdb
  The USER SYS IDENTIFIED BY sys_password
  The USER IDENTIFIED BY system_password SYSTEM
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/mynewdb/redo01.log') SIZE in the 100M.
  GROUP 2 ('/ u01/app/oracle/oradata/mynewdb/redo02.log') SIZE in the 100M.
  GROUP 3 ('/ u01/app/oracle/oradata/mynewdb/redo03.log') SIZE 100 M
  MAXLOGFILES 5
  MAXLOGMEMBERS 5
  MAXLOGHISTORY 1
  MAXDATAFILES 100
  CHARACTER SET US7ASCII
  NATIONAL CHARACTER SET AL16UTF16
  
  If I replace to AL32UTF8 AL16UTF16 NATIONAL CHARACTER SET, will it work to show the Spanish characters?
  
  Sorry for the long-winded question, any advice will be great.
  
  Fortunately,
  Shawn

  Hello
  the national character sets is for the column as nvarchar types not for normal varchar data types. So if your dump file contains column types, you also need to set. The character set is for normal column as a varchar types. The use of unicode is best practice if you use the multiel language, but keep in mind that multibyte character set can be a problem when importing because varchar2 (10) means byte 10 and not 10 characters, so mistakes as an identifier for a long time may occur when importing.
  You can create the database.

  See this documentation:
  http://docs.Oracle.com/CD/B28359_01/server.111/b28298/ch2charset.htm

  You can use a like WE8MSWIN1252 character set which covers the Spanish also (like many, I know) and a superset of us7ascii

  concerning
  Peter

• Test database search script

  Hello

  I have a real problem to find the database search Scripts, documentation around this seems terribly poor, is anyone able to help me?

  I created my search for data based on customer information.

  When I go to database search Options > data search Scripts I use the "display Script example" for purposes of test

  Its my understanding this should contact data of research based on the email address I enter and print the results.  If its unable to find the contact it will print 'Functions of customization not found'

  I stick my 'form Autopopulation Script' in an empty html file.  First question, I have to pull the < div > out of the JS (I put it in front of the JS)

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------

  < div id = "contactinfo" > < / div >

  < SCRIPT TYPE = "text/javascript" LANGUAGE = "JavaScript" > <!--/ /.

  function CreateRow (label, value) {}

  var p = document.createElement ('p');

  var b = document.createElement ('b');

  p.appendChild (b);

  b.appendChild (document.createTextNode (label));

  p.appendChild (document.createTextNode (value));

  document.getElementById('contactinfo').appendChild (p);

  }

  function SetElqContent() {}

  If (this. GetElqContentPersonalizationValue) {}

  CreateRow (': ', GetElqContentPersonalizationValue ('C_FirstName'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_LastName'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_EmailAddress'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_BusPhone'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Company'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Job_Title1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Department1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Address1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Address2'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_City'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Zip_Postal'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Country'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_ANZ_Mail_Flag1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_ANZ_SFDC_Contact_ID1'));

  } else {}

  CreateRow ("customization not found '," ");

  }

  }

  --> < /script >

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Secondly, I paste my "Script for integration" below it:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------

  < SCRIPT TYPE = "text/javascript" LANGUAGE = "JavaScript" > <!--/ /.

  _elqQ.push (['elqDataLookup', escape ('66c01e80420c4bc88c0cab5f149ed81a'),' < C_EmailAddress > Enter_Email Address_here < / C_EmailAddress > ']);

  --> < /script >

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I run this page and I get an error uncaught exception in my JS Console "_elqQ is not defined.

  After a lot of research and found some final or current, I decide that I must add the following above the previous scripts (still not entirely sure on that?).  Not mentioned at all in the page that provides the scripts...

  " < script src =" http://img.EN25.com/i/elqCfg.min.js "type =" text/javascript"> < / script > "

  This seems a step in the right direction (no error console) but I do not print anything either!

  
  

  My final code

  
  

  <! DOCTYPE html >

  < html >

  < head > < / head >

  < body >

  < div id = "contactinfo" > < / div >

  " < script src =" http://img.EN25.com/i/elqCfg.min.js "type =" text/javascript"> < / script > "

  < SCRIPT TYPE = "text/javascript" LANGUAGE = "JavaScript" > <!--/ /.

  function CreateRow (label, value) {}

  var p = document.createElement ('p');

  var b = document.createElement ('b');

  p.appendChild (b);

  b.appendChild (document.createTextNode (label));

  p.appendChild (document.createTextNode (value));

  document.getElementById('contactinfo').appendChild (p);

  }

  function SetElqContent() {}

  If (this. GetElqContentPersonalizationValue) {}

  CreateRow (': ', GetElqContentPersonalizationValue ('C_FirstName'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_LastName'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_EmailAddress'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_BusPhone'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Company'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Job_Title1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Department1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Address1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Address2'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_City'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Zip_Postal'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Country'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_ANZ_Mail_Flag1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_ANZ_SFDC_Contact_ID1'));

  } else {}

  CreateRow ("customization not found '," ");

  }

  }

  --> < /script >

  
  

  < SCRIPT TYPE = "text/javascript" LANGUAGE = "JavaScript" > <!--/ /.

  _elqQ.push (['elqDataLookup', escape ('66c01e80420c4bc88c0cab5f149ed81a'),' < C_EmailAddress >Enter_Email Address_here< / C_EmailAddress > ']);

  --> < /script >

  < / body >

  < / html >

  Okay, so I found where the complete code 'Test '.

  Settings > Setup > site > monitoring > visitor tracking > visitor tracking package.

  In these files that I found rather than the

  If (window.addEventListener) window.addEventListener ('DOMContentLoaded', async_load, false);

  Else if (window.attachEvent) window.attachEvent ("onload", async_load);

  })();

     

  Just a little more tweaking and playing, and I'm finally here Yay!

• issue of database creation time

  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  PL/SQL Release 11.1.0.7.0 - Production
  CORE Production 11.1.0.7.0
  AMT for Solaris: 11.1.0.7.0 - Production Version
  NLSRTL Version 11.1.0.7.0 - Production
  
  I think this would be a specific query about the creation of db real time after refresh
  
  Select RESETLOGS_TIME, PRIOR_RESETLOGS_TIME, v status $ database_incarnation
  When status = "CURRENT";
  Also, I've seen a database in which v$ database.created < v$ database_incarnation.resetlogs_time.
  What I did for this database was that
  
  (a) update from the production
  (b) renamed the database using nest
  and I noticed the above. No idea why in this case the control file create time is less than the resetlogs_time
  
  Thank you
  MSK

  If you have restored only a control file to restore a database THAT RMAN has no reason to change the database creation time because it assumes that you just want to restore the same database on the same site or to move it to another location (but it's always the same database). Using RMAN DUPLICATE is different.

• VMware Identity Manager™ 2.4.0.0 build 3035173 from internal database creation

  Hello

  I try to configure Identity manager 2.4 (VMware Identity Manager™ 2.4.0.0 Build 3035173)

  I'm stuck on the creation of the database, he told me that the field "organization" is empty and that these are invalid characters

  I saw a thread open on the same subject since September, but there was no follow-up to the top.

  Thanks in advance for the help.

  You happen to have a screenshot?

  Don't forget that you need to access Web Assistant using a FULL domain name. You can not only use the name of host or ip address... If you create db error will be...

• Send form data to the database with scripted button

  I know not how to connect the form to an Access database. However, I do not want the form to connect to the database until the user clicks a button. When the user completes the form and clicks the button, I need the form to connect to the database and save form data in a new record. How script button to do this?

  Any help is appreciated.

  I think that you will need to use a layer between the two.  For example, LC, you can do a process that takes your data and stores it in your database.  Your form may submit to this process through SOAP and REST.

• Solaris 10 database shutdown script

  Use Oracle Solaris 10 and looking for a stop on the database script when a DBA is not available at the stop of the database. Thank you

  For an automatic start and stop on Unix platforms, please read http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#CFAHAHGA. These scripts work for 10.2 and 11.2 (and should also work for 11.1).

• want to take some 'CREATION Script' for all existing roles in DB.

  Hi all
  
  I want to take all existing roles in DB "Script of CREATION".
  Please give me the script to generate if you or suggest any link or doc.
  
  Oracle 10G

  Use this-
  Select "select dbms_metadata.get_ddl ('ROLE'," ' |) " ROLE | " ') || Chr (10) | "/" double; »
  from dba_roles
  /

  Please be aware subsidies will not come within the definition

  If you like the answer so don't forget to give points

• HRCS 9.0 database installation script does not have the Data Mover Bootstrap

  People,
  
  Hello. I'm working on Campus Solution 9.0 and human resources.
  
  Atfter install HRCS 9.0 in PeopleTools 8.49, I create a script and run the script to load data into a database using the Data Mover Bootstrap HRCS.
  
  Data Mover Bootstrap mode, when the script imports about 1,000 records in the database, the Data Mover becomes unresponsive. How do the Data Mover to continue to run the script?

  As I said previously, you should check the log generated by the MDS file and as explained Jean-Marc, despite his suspended looks, the script can continue behind.
  A database of loading may take some time, depending on the configuration of the server/network.
  If you have an error in the unique key, this means that the tables has already loaded, so you can drop it and restart the DMS of this table or restart from scratch.

  Nicolas.

• Password database Chaning scripts

  We have more than 100 shell scripts on the database server that has the password for the dba user in these scripts.
  
  for example:
  test.sh
  
  UserID = s/n
  password = s/n
  
  Now, he must change the password for the dba user and hide the password for all users on this box.
  
  What will be the best solution to change the password.
  Is it possible to store the password in a file and leave the script uses this password?

  Hello

  Something very simple like

  my script which uses the password
  
  i=`cat erro.txt`
  echo $i
  
  text file which contain the password
  
  password
  
  Output I get
  sh output.sh
  
  password
  

  Concerning
  Anurag Tibrewal

• Need help with simple database creation in number.

  I'm trying to create a simple database in number to capture the case IDs on my place of work. After you have entered a value in the worksheet 1 details must automatically added to sheet 2. Once the case details are entered and user click on the "submit" button (could not include in the screenshot), it should appear in the sheet 2. If number offers this feature, it would be very useful for me.

  Thanks to ddvance,

  Nanan

  

  Why don't you just enter values directly in the second table?  You could format C and D in the context Menu.

  SG

• Separate database creation

  Hello friends,
  
  I have to create a new database as the production, but do not know how can I do!
  
  The details of the server is provided for in:
  EBS 12.1.1
  RedHat Linux 64-bit
  Vision database
  
  The detail of the score is provided for in:
  
  Use of file system - size - used - Avail - % - mounted
  / dev/sda5 - 15 G - 2.5 G - 12 G - 18%.
  sda7 - 107 G - 40 G - 62 G - 39% - /PROD
  / dev/sda3 - 54 G - 47 G - 3, G 6 - 93% - Designer
  / dev/sda2 - 262 G - 232 G - 17 G - 94% - /VISION
  / dev/sda1 - 99M - 12 M - 83 M - 13% - / boot
  tmpfs - 3.9 G - 2.8 M - 3.9 G - 1% - / dev/shm
  
  Memory information:
  
  Total memory: 7974
  Memory used: 7893
  -/ + buffers/cache: 1773 / 6200
  Swap: 16386, used: 0
  
  Size of SGA:
  SGA_MAX_SIZE: 4G
  SGA_TARGET: 4G
  
  It seems that I don't have a lot of space. Further, I can't delete vision as we use it for demonstration purposes.
  
  Help, please.
  
  Concerning
  
  
  Aneel

  (1) how much space they will have to create the new database?

  You install a new database or cloning an existing?

  If you are cloning, you need the same size of the source database.

  If you perform the installation, please visit http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699i4773.htm#3708195

  (2) if I have space up to 450 GB and I re - install OS can I have 2 instances (Vision & Prod) then?

  N °

  (3) can I remove some unusable due to the Vision of making space tablespaces? (Sorry if this sound like a stupid question - I'm newbie: P)

  Yes, if it is possible and you need to resize the existing storage spaces.

  Thank you
  Hussein

• Preferred method of creating a relief database creation

  Version: 11 GR 1 material
  
  
  Which is the preferred method of creating a database of pending? Is it by
  
  a. copy the relevant files to the standby server
  b. use of RMAN
  c. use of Data Guard Broker

  Very beautiful :^)

  In order to clarify. You do not use the broker to create the day before. The Broker allows you to manage a wait that you already created. There are no orders in the broker to create a database of pending. If you use Enterprise manager Grid Control, you can use it to create a database of pending which will then automatically (except if you say no) handled by the broker. Take a look at http://www.oracle.com/technology/pub/articles/havewala-easydr.htm for a nice article on how to use the Grid control to create your vigil.

  There are also several documents of MAA on the subject.

  http://www.Oracle.com/technology/deploy/availability/PDF/MAA_WP_10g_RACPrimarySingleInstancePhysicalStandby.PDF
  http://www.Oracle.com/technology/deploy/availability/PDF/MAA_WP_10g_RACPrimaryRACPhysicalStandby.PDF

  to name a couple.

  And of course, there is the Manual:

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28294/create_ps.htm#i63561
  and
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28294/rcmbackp.htm#i636377

  But of course (attention, shameless plug book) you should read Chapter 2 of our custody of 11g manual to http://www.amazon.com/Oracle-Data-Guard-Handbook-ebook/dp/B002JA02GG data

  Larry

• database creation error

  Hi all

  I try my program but I get an error when the second line below runs. Stuck on this during a long time now. Any help will be appreciated. Thank you.

  String dbLocation = "/ device/home/user/MyApp /";
  Basis of data db = DatabaseFactory.openOrCreate (uri, new DatabaseSecurityOptions (false));

  After some research, found the underlying issue.

  The reason why it did not work for me is internal memory MEM (built in microsd card) is required for this approach to work and 9700 doesnot have everything.

• Run the database sql script

  Is this possible in some form?
  
  < = 'name' datasource cfquery name = "dsn" >
  #query.sqlstatement # < / cfquery >

  Yes, if you mean creating a query string, and then using them in a cfquery. Usually, you will need to place the text of the query in a PreserveSingleQuotes() function if you have settings that are placed in single quotes, something like this

  
  #PreserveSingleQuotes (sqlstatement) #.
  

  Phil