Database have suddenly stopped.

Similar Questions

• CD and DVD-Rom drivers have suddenly stopped working

  Device drivers CD/DVD-Rom does not recognize the CD and have suddenly stopped working.

  you have changed the cd rom or dvd rom and does not recognize the CD... go to my computer and you see that there is no cd/DVD-rom installed - there is the http://support.microsoft.com/mats/cd_dvd_drive_problems/ solution

• HDMI output have suddenly stopped. Pavilion a6340a

  Hello

  I posted here in hope that someone can give me some advice.

  The system in Question is:

  • HP Pavilion a6340a desktop computer. Double heart
  • Vista 32 bit SP2.
  • NVIDIA GF8400GS
  • COMPRO Video mate Vista TV Capture card.
  • 2 GB of RAM.

  It is a bit of an older system, I guess, but it plays well as a HTPC for a while now. It has a small LCD monitor connected via the standard connection and a large flat screen Toshiba TV connected via HDMI. He did a great job.

  Today, the HDMI output just stopped. The Toshiba TV again to survey/is visible in the Nvidia Control Panel and the Vista Control Panel when it is connected to the HDMI. the implementation of the features of multiple monitors are available. But there is nothing happening on TV.

  Things has tried so far.

  • Two different Cables HDMI - nothing.
  • Connected my Pavilion Notebook DV6 on the same HDMI port on the TV - works fine.
  • Installed the latest driver from Nvidia - nothing.
  • Tried all the three HDMI ports on the TV - nothing.
  • Physically, shot the video card in the computer, he dusted off and reassembled it. -Nothing.

  I don't understand. Could this be a processor problem, or I have to pay for a new video card? Is it possible to test the output from the HDMI port with a multimeter or something? I do not understand why it would stop just like that. I just installed Vista SP2 a few weeks ago, but it was working well after I did.

  Any help with this would be greatly appreciated. The system is out of warranty, of course, but it has been a great HTPC for me. I stuck a blu - ray inside player and I was about to give him another 2 GB of RAM.

  Kind of useless now, without HDMI.

  IM at a loss. What else can I do to verify that Exchange of the graphics card?

  Hello

  The short answer is: replace the video card VNvidia GF8400GS. If you happen to have another video card around laying which has an output and HDMI, then install it for a test. It's the fastest way to solve the problem.

  Best regards

  EICO

• A number of keys on Acer Aspire have suddenly stopped working.

  Original title: some keys not working not

  I have an acer aspire laptop all at once a number of keys have stopped working the x c. f n?  stopped working.  any ideas?

  Hi Laura,

  1. have you made a recent software or hardware changes to the system?

  2. what Windows operating system do you use?

  Method 1:

  You can try to install the latest version of the drivers from the Acer site and check.

  Support of Acer & downloads

  Method 2:

  You can also check if the FN key is enabled. If so, then try to switch it off.

  Method 3:

  If you still experience the problem, try to activate the on screen keyboard and check if the problem persists.
  Type without using the keyboard (on-screen keyboard)

• Can someone explain why all my Spry assets on a website online have suddenly stopped working?

  Can someone explain why all my Spry assets on a website online have stopped responding? I checked that Spry CSS and JS files are in place. Then checked the files on Dreamweavers mode live view and they do not work here either. It was fine a few weeks ago that it's almost as if the web browsers stopped tearing Spry, for example, the links for the collapsible panels are not yet recognized as links.

  I use 'old' on Dreamweaver CS4 spry assets (if that makes a difference). Active Spry tabbed panels are removable panels.

  Thanks for your help.

  Manufacturers should come after the library. In other words, you have moved libraries below links

  Move high to the bottom of your page and everything is fine.

  This brings me to ask why you do not use SpryCollapsiblePanelGroup as in Spry/SpryCollapsiblePanelGroup.html to the adobe/Spry master · GitHub

  Of course, if you want to be really up-to-date, try the version of jQuery http://jqueryui.com/accordion/

• After you create a site in recent months, the effects of scroll have suddenly stopped working in preview mode and publication.

  Hi all

  I fortunately worked on the Web site a page of simple Parallax for the last few months working on it and style stable thanks to a test site of Business Catalyst using my creative cloud account. After you open today to make final changes, I see everyone with the exception of a single element with scrollbars attached effects were completely missing in preview mode. After having published the site again to the location of the test are lack there as well and I cannot work out why it happened. Very frustrating as I had just reach a point where I was happy with the content. I even restored a backup version from two weeks ago, when the site was work and site the same items were missing when they appear just as usual in design mode.

  Any thoughts anyone has would be greatly appreciated.

  Thank you very much

  Steve

  Sorry people, should have tried really this first - it took a reinstall of the Muse to solve the problem.

• Introduction 'sounds', etc. have suddenly stopped. Control Panel 'sounds' tells OK!

  Only concerned noises are: signature/signature off - for incoming mail - error alerts, etc.

  Problem solved!  the "mute" on the toolbar below has been 'on '.  Very small icon and easily missed.

• My drives E and F have suddenly disappeared. I can't play my CD to install my new printer

  I searched with almost all programs which said it corrects your drivers, but they do not fix readers for the CD-DVD-R-W. These 2 drives have suddenly stopped working. I can't install my new printer... I have HP which is the computer that I and WindowsXP and still have no results.

  Hi PollyHarris,

  1. did you of recent changes on the computer?

  2. you have any third-party DVD burning software installed on the computer?

  3. you receive an error message when you insert a DVD in the player?

  See the link below and run them the fixit tool available, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  If the previous step fails, then check in Device Manager for the status of the disk on the computer and after return details.

  How to solve the problems of hardware with Device Manager

  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

• My HP Officejet 6500 all-in-one wireless suddenly stopped to print black, even if I have a lot I have

  My HP Officejet 6500 all-in-in-one wireless suddenly stopped printing black, even if I have a lot of ink. It prints all other colors. When I try to check the ink levels it tells me that this printer is not available, try again later. I have a lot of ink. Have restarted printer and Mac Book Pro. Driver is up-to-date. Any thoughts?

  Reset the printer.  Turn the power off and then hold the # and 6 keys during and shortly after turning it on.

• Hi my printer suddenly stopped and execution runtime error. Question of debugging Microsoft Visual c ++ runtime library. I have reset the drivers but still does not. It's windows vista 32 bit

  Hi, my printer has suddenly stopped.

  Program c:\windows\windows\system32\spoolsv.exe
  c:\windows\windows\system32\spool\drivers\W32X86\3\lxdidatr.dll

  Run the time check failure #3-la variable is 'sinumberofTopic' is used without being defined
  If I try again it said failure of the assertion
  File dmrclibrary.cpp
  Line 415
  Expression: m_hlibModule

  First of all, you can try using system restore if the problem just started happening.

  Go to your Start Menu > Accessories > system tools > system restore.

  Select a point of dated system restore to before the problem started happening and then restore your system at this point. During the system restore, you can restore the configuration of your system and you will not lose any personal data, the system restore affects only your configuration.

  After doing the system restore you don't like something that has changed on your system, you can "undo" the restoration of the system.

  If the system restore is not an option for you, or System Restore does not resolve the problem, you can take the measures put forward in the Microsoft Knowledgebase article below:

  You can also try diagnostics automated web site Windows Fix It:

  http://support.Microsoft.com/GP/printing_problems

  or take the advanced stages described in the following knowledge base article:

  http://support.Microsoft.com/kb/810894

• Ear buds suddenly stop working

  After update to iOS 9.3.5 my headphones suddenly stop.  I'll try other headphones with the same result.  Only way to resolve is to stop and restart the phone.  Anyone else having this problem?

  While someone else might encounter this problem, it is not relevant to your situation. You want or need to fix your device. If a stop will be fix and it happens again, there is the possibility there is something wrong with the headphone jack. You can make an appointment at the Genius Bar in the Apple store nearest to have jack and Headphones reviewed by Apple. They will explain your options.

• The keyboard and mouse bluetooth suddenly stops working

  I asked this question before using Dell, but none of the answers provided.
  The keyboard and mouse bluetooth suddenly stops working.

  Given that this only happens when I'm online I make this question to the FireFox support.
  I have the latest version of FF:

  I installed the new BIOS and Shipset, but that does not change.

  Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

  R

  FredMcD said

  Keep a log of when this happens. What did you do when...

  Check the batteries.

  Hello

  Thanks for the help

  Just for information:

  I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

  Concerning

  R

• the sound has suddenly stopped working

  I have the Macbook Pro (15, early 2011), 10.11.6 version. Cannot determine why it suddenly stopped - checked its prefs, tried using headphones, or worked. don't have not added any new software-worked yesterday, today is not. has ran disk utility and I TTPro 7, Drive Genius and Disk Doctor, but those who seem to be more inclined to look at files, storage, etc.. Warranty is out. any ideas, anyone?

  Try troubleshooting help here > troubleshooting problems with no audio from speakers on the Mac - Apple Support

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• iPhone 6s suddenly stopped to receive emails

  I have 2 email accounts Setup on my iPhone 6 s; 1 POP3 and IMAP 1.

  Had no problem send and receive e-mails from the purchase of phone.

  Phone suddenly stopped to receive all emails, on both accounts. I CAN always send emails from phone without any problem.

  So far, I have (with no chance to solve the problem):

  -reset the settings on the phone network

  -removed/added the two accounts

  -done the hard reset on the phone.

  Any ideas?

  Contact your e-mail provider and ask if they changed the pop3 / imap servers, ports or the authentication method.