database, SYNTAX
Hello
I have a VI with DB connectivity toolkit. On this, I use a DB tool select data. I'm trying to read data from a table by using a SQL query (in State). Well, when one using the sentence
SELECT id FROM SensoresIR1 WHERE id = 36151
LabVIEW gives me an error:
Tags: NI Software
Similar Questions
-
I had to do a restore of database; to get rid of some bad data that was loaded and when it ends, I want back at a specific time, but I'm not sure of the correct syntax. An application provider gave me the following to try but I wanted to get other comments until something is wrong. Any help would be great... Thank you... Mike
I'll try to find the exact syntax and haven't seen it written anywhere, if
recover the database up to the ' March 17, 2015 15:00.
doesn't work, try
recover database until time ' March 17, 2015 15:00.
and if this does not work, try
recover the database to the ' 17 March 2015 15:00 '
and if this does not work, try
recover database until time ' 17 March 2015 15:00 '
and if this does not work, try
recover database until time to_date ('2015-03 - 17:15:00:00 ',' HH24:MI:SS')
and if this does not work, try
recover database until time ' to_date ('2015-03 - 17:15:00:00 ',' HH24:MI:SS').
and if this does not work, try
- RUN
- {
- Until THE MOMENT ' March 17, 2015 15:00 '
- RECOVER THE DATABASE;
small question, I do the rman database restoration, I'd do the
- recover database until time ' to_date ('2015-03-17 15:00 ',' YYYY-MM-DD HH24:MI:SS') "; of rman also or sqlplus?
-
Flashback database syntax question
EE Oracle 10.2.0.4 on OEL 5
This should be a matter of syntax simple, right?
Practice some scenarios to return back and looking at the syntax to
http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14194/rcmsynta032.htm#sthref515
In the examples, they show a
but the real syntax diagram does not show an option "TIMESTAMP", just "on TIME" and "AHEAD of TIME".RMAN> FLASHBACK DATABASE TO TIMESTAMP TO_TIMESTAMP('2002-03-11 16:00:00', 'YYYY-MM-DD HH24:MI:SS');
Based on, let's try a simple test
Hmm, okay, then what format does? In fact, he reported in two different formats:RMAN> flashback database to time = '18-MAY-2010 12:50:00'; Starting flashback at 18-MAY-2010 13:10:00 using channel ORA_DISK_1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of flashback command at 05/18/2010 13:10:00 ORA-01830: date format picture ends before converting entire input string
andStarting flashback at 18-MAY-2010 13:10:00
If pressing on some others, let's try that should be obvious:RMAN-03002: failure of flashback command at 05/18/2010 13:10:00
Built on the docs and other resources on the web, I find several variations on the theme, but all end up throwing one of the errors above.RMAN> flashback database to time = to_date('05/18/2010 12:50:00','mm/dd/yyyy hh24:mi:ss') RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-00558: error encountered while parsing input commands RMAN-01009: syntax error: found "identifier": expecting one of: "double-quoted-string, single-quoted-string" RMAN-01008: the bad identifier was: to_date RMAN-01007: at line 1 column 30 file: standard input RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-00558: error encountered while parsing input commands RMAN-01009: syntax error: found "(": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, configure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, renormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate" RMAN-01007: at line 1 column 37 file: standard input RMAN>
I can't believe, I've been reduced to what should be a matter of doc, but in this case, it's the documentation examples which throw errors. I'm going blind? The brain cell was killed by that I had last week of beer criticism? ;-)From:
RMAN> flashback database to time = to_date('05/18/2010 12:50:00','mm/dd/yyyy hh24:mi:ss') RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-00558: error encountered while parsing input commands RMAN-01009: syntax error: found "identifier": expecting one of: "double-quoted-string, single-quoted-string" RMAN-01008: the bad identifier was: to_date RMAN-01007: at line 1 column 30 file: standard input
Could you please try adding double quotes around the expression date?
flashback database to time = "to_date('05/18/2010 12:50:00','mm/dd/yyyy hh24:mi:ss')";
-
Developer-Online: new Tutorial published! JQuery Autosuggest Facebook like PHP
JQuery Autosuggest Facebook like PHP
Construction of a database with PHP/MySql and jQuery AutoSuggest box. We will check that a user has typed check against what is in our database and where there is a match, pass the results back in a list of suggestion, all call the via a jQuery AJAX.
Tags: MySQL | php | Forms | News | Ajax |
Author: Patrizio Quatrini
__
Best regards
Waleed Barakat
Programmer and developer online creative
www.Developer-online.comHeya,
When I read your post, I initially thought you were posting a tutorial on the question of whether or not a chosen user name is already resigtered on registration as this tutorial page:
http://DwFAQ.info/signup_demo.php
User name of Spry availabilityCreated: Sunday, July 5, 2009 14:29Then after looking at the page you linked to and try to understand the purpose of this tutorial, I've noticed that you're talking about something like this:
http://DwFAQ.info/home.php?ID=7
Spry searchCreated: Sunday, March 1st, 2009 20:51It's pretty simple to do with the link I referenced. Just create your database with populated tables, use the script mentioned to convert data from the database in xml syntax, then enter your dynamic database script as the location of the xmlDataSet linked spry page.
View source on this page which shows the non-destructive filter in action to see how it's done! You can also Spice it up a little products, etc. using this method. The key is to create a dynamic xml from your database syntax, and then use the location of the dynamic xml as your xmlDataSet script in the search page.
I have an example of the auto suggest search on my homepage http://DwFAQ.info
On the upper-left corner of the page, click on the link that says search for tutorials to bring up the search form. Then start typing characters in the search box to view the Scriptures instantly filter depending on the characters that are typed. You can also further filter by clicking on the category checkboxes to filter by keyword AND category.
You can view the source code on my site to see the location of the dynamic xml syntax that is referenced as the location of xmlDataSet and how it has been implemented in the site.
-
noarchivelogs and the control file
Hi guys,.
(Oracle 9.2.0.7)
If I have
CREATE CONTROLFILE SET DATABASE 'MY_DB' RESETLOGS NOARCHIVELOG
Does this mean that my database cannot be used archivelogs? I'm confued - I can't seem to find a way to specify (NO) ARCHIVELOG parameter in the create database command. I would have thought the archive setting would be defined in the init file, or, when you create the database.
Help, please1. you can specify ARCHIVELOG DATA CREATE database (look at the 'clauses of database registration' in the CREATE DATABASE syntax in [http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_5004.htm#i2061233])
2. However, general practice is to first create the database in NoArchiveLog, fill all creation scripts and then convert the database in ARCHIVELOG mode.
3. conversion of a database in ARCHIVELOG mode is done with the command 'ALTER DATABASE ARCHIVELOG' when the database is in "STARTUP MOUNT". Note that you should install log_archive_dest (or several dests) as well.
-
Syntax of GRANT: grant SELECT on table privileges to a user on a remote database
Hello
I have two databases: DEV1 and DEV2. Dev1 is my source database and DEV2 is the target database. There is a table in the diagram A on Dev1. I created a DBLINK PUBLIC 'TESTDBLINK' in the diagram B on DEV2 that connects to figure A on DEV1.
Machine of Table for the database schema
DEV1 AN EMP 192.168.210.10
Database Machine Lik database schema
DEV2 B TESTDBLINK 192.168.210.11
How to SELECT on the schema Table EMP (DEV1) diagram b the DEV2 privileges? What is the syntax?
Sign up for example in the form of scheme A on DEV 1
SQL > GRANT SELECT ON EMP to? * *
Thanks for your contributions
HarryDo not give this table in diagram A diagram B.
Inside the diagram B, you can just issue a select statement as follows:
select * from table@db-link-to-A
Oracle connects to the remote instance by using the credentials of the scheme A, and since A is the owner of this table, Oracle can already access the table.
-
Get the syntax error when you try to reproduce in the auxiliary database
I get the following error message when you try to duplicate an instance:
D:\ > rman target sys/xxx@hr3 rmancat/xxx@rman AUXILIARY catalogue.
Recovery Manager: release 9.2.0.7.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: HR3 (DBID = 3470722132)
connected to the recovery catalog database
connected to the auxiliary database: CLONE (unassembled)
RMAN > DATABASE of TARGET in DOUBLES at THE CLONE until TIME ' TO_DATE (February 24, 2011 0:00:06).
(0 ',' JJ-MM-AAAA HH24:MI:SS') ".
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01005: syntax error: found 'clone': expected an a: 'double-quoted-string '.
identifier, single-quoted-string ".
RMAN-01007: 30 line 1 column file: entry standard
Is it because I named the cloned database "CLONE", and that is a reserved word for Oracle, or is this something else that I missed?
Thanks for any response...
/ RonnyHello
Is it because I named the cloned database "CLONE", and that is a reserved word for Oracle, or is this something else that I missed?
Fix this error related to the keyword.
You can run into a new problem in function if your configuration is incorrect.
(backup items available on the clone host, file systems, settings etc..)
Rgds,
Tycho -
DB connectivity Kit: syntax error in a SELECTION of data from joined tables
Hello everyone
I'm putting in labview a SQL query on joined tables.
As an example I take a database to store the data of basketball 2on2 matches, which tables are
corresponds to (matchId, Thomas, teamB)
teams (teamId,PlayerAname, PlayerBname, nationality)
nationalities (NatId, natName)
To get an array of result with the game as well as the names of player as well as their nationality, I use this query on MySQL (which works on command line interface)
SELECT MatchID,
T1. PlayerAName, t1. PlayerBName, n1.natName,
T2. PlayerAName, t2. PlayerBName, n2.natName
MATCHES m
INNER JOIN teams t1 ON t1.teamID = m.teamA
INNER JOIN teams t2 ON t2.teamID = m.teamB
INNER JOIN nationalities L1 ON n1.natID = t1.nationality
INNER JOIN nationalities n2 ON n2.natID = t2.nationalityWhen I put it in labview, using the block 'select data', I get a syntax error as shown in the attached screenshot.
Am I something mistanking using the JOIN examples statements or aliases?
Thanks in advance!
The select VI is designed to be a simple way to select from a table. I doubt that he can do joins (and would not certainly need the 'FROM', even if it can). What you can do instead calls the query execute VI and give him the complete SQL query. I don't remember if it returns the data in the recordset object, so you must do so separately.
-
Error message - database connection
Hello
I need your help. I just got this error message when I create a table using the MS Access database.
NI_Database_API.lvlib:conn Execute.vi-> NI_Database_API.lvlibB tools create Table.vi-> Untitled 3
ADO error: 0x80040E14 Exception occurred in the Microsoft OLE DB provider for ODBC drivers: syntax [Microsoft] [ODBC Microsoft Access driver] error in field definition. in NI_Database_API.lvlib:Conn Execute.vi-> NI_Database_API.lvlibB tools create Table.vi-> no title 3
I am a being gainer to view lab data, what should I do to fix this?
RD
Gaudin
BMETTENT wrote:
Hello
I need your help. I just got this error message when I create a table using the MS Access database.
NI_Database_API.lvlib:conn Execute.vi-> NI_Database_API.lvlibB tools create Table.vi-> Untitled 3
ADO error: 0x80040E14 Exception occurred in the Microsoft OLE DB provider for ODBC drivers: syntax [Microsoft] [ODBC Microsoft Access driver] error in field definition. in NI_Database_API.lvlib:Conn Execute.vi-> NI_Database_API.lvlibB tools create Table.vi-> no title 3
I am a being gainer to view lab data, what should I do to fix this?
RD
Gaudin
As you said you to http://forums.ni.com/t5/LabVIEW/what-error-is-this/td-p/2028382
the way to fix this is to learn SQL
This isn't a problem with LabVIEW.
-
LabSQL to MySQL connection string syntax
Hi all
I'm just starting using labSQL and MySQL and cannot even connect to the database, I want to start practicing. I tried to write my own code and use the code example, but I can't get a connection to a database. The error is still "an Exception occurred at ADODB. Connection: The operation is not allowed when the object is closed. Help path is C:\Windows\HELP\ADO270. CHM and context in ADO Execute.vi connection 1240653-> Simple.vi". I've set up a system DSN using the MySQL ODBC Unicode 5.2 driver and I'm under Labview 2012 with MySQL Workbench/5.6 Server 5.2. I really just need to know the syntax of the connection string that you pass in the ADO connection open vi.
Thank you in advance.
-
Key id of database of newspapers
Hello
I was instructed to take the newspapers of different testers and insert these log files in a central database.
I was able to split the data I need to get out, but I have real problems with the creation of a key. Now, I've split the log files in 2 separate tables.
1 table contains the main results (if it has the serial number, type of test, unit type, duration, start date/time and status)
2nd table contains the details of tests were merged (cocacenated) with the pass / fail result.
The two tables will be linked by this ID.
I am trying to achieve on HeidiSQL (MySQL)
I have installed ODBC for mysql and its related to the database.
Here is the sample code im work off of, but I can't make it work either.
However when I run this I just syntax errors.
I did something stupid without realizing it?
Kind regards
Looks like VI made citing no automatic string identifiers. Try to add the names of columns that contain a space in square brackets.
for example
[Date of Test]
If you can still change the definition of the table it was preferable however to avoid spaces in column names and other identifiers of databases. Use CamelCase as you did for SerialNumber or replace the space with an underscore character.
-
LabVIEW database problem: create a database of the user-defined fields
I am trying to create a new table in Access database opened by an ODBC connection from information between a table stored in the database, but whenever I try to create the table, the toolkit of connectivity of database of Labview VI to create a table get up a mistake costed
«Exception occurred in the Microsoft OLE DB provider for ODBC drivers: syntax [Microsoft] [ODBC Microsoft Access driver] error in field definition.» "in NI_Database_API.lvlib:Conn Execute.vi-> NI_Database_API.lvlibB tools create Table.vi-> DatabaseCreateHeaders.vi.
I think it's because I'm trying to re - create the database column variable type, but I don't know what I'm doing wrong. Everything seems fine data types, and everything works as long as I use a constant to create database columns. I even tried to put all the information in the labview set, format, which changed to a variant and redefined it as the labview database column type.
I have attached a simplified VI and a picture of what I'm trying to do, but I'd appreciate any help I can get. I hope that I have pulled all my hair at the time where a certain answers!
Make sure that your domain names are not of the reserved words
-
PDF of new style racadm syntax?
Years, I used the old style of command racadm syntax such as:
racadm methods g cfgRacTuning-o cfgRacTuneWebserverEnable
The new syntax of style seen on support in the CLI DRAC is rather:
racadm idrac.webserver.enable get
Is there a new PDF which details all new get and set for racadm commands?
Take a look at the user guide CLI to the section objects in database with Get and Set of commands of the manuals & documentation for your integrated Dell Remote Access Controller7/8 with Lifecycle Controller Version 2.30.30.30
-
Equivalents of syntax. Dell Networking OS 6 PowerConnect
I have a few new switches Dell Networking N3xxx and try to configure via the command line. I'm too good with the old OS powerconnect switch, so I'm looking for a few equivalents of syntax. In particular:
1. on a powerconnect switch, when you wanted to create a high, user account should look like this:
level of fred username pass mypassword 15
The OS 6, it will not allow '15 level' which is the equivalent in OS 6?
2. on a powerconnect switch, when you wanted to create a VLAN, it looked like:
database of VLAN
VLAN [#]
The OS 6, he doesn't like something like that. What would be the equivalent in OS 6?
Are there resources that could help?
There was a few syntax changes in the newer operating system. I find the easiest way to find the difference is to look for the cli for similar commands guide.
For the user, you would use:
Console (config) # username bob xxxyyymmm privilege 15 password
For use in creation of VLANs:
Console (config) #vlan 22,23,56
Here is a link to the CLI user guides can help during the transition period.
I would like to know if there are other commands you need assistance.
See you soon
-
Link to database using a different name
We moved four instances oracle from one server to another. Two of these Oracle1 and Oracle2 oracle instances had a link established between them.
When we moved changed them the host name. We have published all the configuration files and everything works fine.
However, the link was not working so we dropped it and try to recreate it. We dropped without a lot of research and hit an obstacle.
The link is Oracle2 of Oracle1. The local name on Oracle1 (link) is called RemoteDB. It must be different. Currently works in our prod environment and the names are different, so we know it works, we just don't know how. The DBA who put in place is no longer with us.
Here's the SQL link:
CREATE DATABASE LINK RemoteDB CONNECT TO RemoteUser IDENTIFIED BY RemotePassword USING 'Oracle2';
When a desired query:
SELECT * FROM DUAL@RemoteDB;
You get this error message:
Link : "RemoteDB" Error : ORA-02085: database link RemoteDB connects to Oracle2
We know that it works because it works in production, but may not understand the appropriate configuration settings or Create Database link syntax to reveal the name of link differs from the SID or Service name.
Disabling global_names is everywhere on the web, but does not feel good solution because it is not currently how our environments are configured.
No indication as to how this configuration or syntax works would be much appreciated.
Thank you
Shawn
If it turns out that in Oracle2, the global_names is false in our production environment. I must have been recorded in test when we look ahead.
We realized that the change in testing and our link now has the same behavior as the production.
Unfortunately, this put it on the radar for our security team. Even when you win - you lose!
Thanks to all of you to post a reply. They helped me be more informed if nothing else.
Shawn
Maybe you are looking for
-
Firefox showing users that Java is out of date
The latest version of Java on WIndows PC, is currently Java7 U51. Java8 was released in beta version. When you do a check in Firefox to check if your plugins are up to date, Firefow tells you that Java is obsolete. He wants that you upgrade to Java8.
-
Y at - it an upgrade of Windows Compression that will allow the opening of a file Winzip 15?
Original title: compatibility of winzip 15. Y at - it an upgrade of Windows Compression that will allow the opening of a file Winzip 15?
-
My burned disc will show on other computers, even if I chose the format "mastered".
Recently, I burned a DVD however, even after the selection "MASTERED" it still will not display on any other system, I tried all the help advice on closing and finalize a CD/DVD, but always without success. I have not however when Windows (Vista) was
-
I try to open the E-mail from C++ composer and preload a simple message body into it. Here is the code I use, but it does not work for some reason any. It runs, but nothing happens. bb::system::InvokeManager* m_invokeManager = new bb::system::InvokeM
-
BlackBerry Smartphones Software 4.7 for Curve 8830
I've been a BB user for 2 days from receipt of my phone Friday.My phone came with BlackBerry Desktop 4.5 and I initially installed this version. Yesterday, being a surfer I checked for updated software and found there was a 4.7 version, I downloaded,