Command to change CPU and carrots

Similar Questions

• How does vcenter distribute CPU and carrots in particular for virtual machines?

  Hi, so we have about 50 vms on 4 hosts in cluster.

  Each VM has got 1 vcpu assigned to them. Today, I had a developer tell me it is terrible, it was because he wanted to tell once the cpu is pegged at 100%, nobody else could do anything on the machine.

  This raised an interesting question: how vmware does manage the underlying and carrots individuals host CPU?

  If I give 2 CPUs in a machine, it maps to the physical CPU underlying, or is he underlying host carrots?

  And finally, if I assigned 2 processors to each vmachine, will I see performance degradation in the cluster to compare to just assign a?

  See you soon!

  Hi, so we have about 50 vms on 4 hosts in cluster.

  Each VM has got 1 vcpu assigned to them. Today, I had a developer tell me it is terrible, it was because he wanted to tell once the cpu is pegged at 100%, nobody else could do anything on the machine.

  It would be the case with a physical machine if a processor is pegged at 100%, that it is 100% not different between physical and virtual I'm afraid.

  This raised an interesting question: how vmware does manage the underlying and carrots individuals host CPU?

  First of all, it is not vCenter which manages the planning of CPU is the individual host servers.  read the following doc for a very good idea to schedule of CPU

  http://www.VMware.com/files/PDF/perf-vSphere-cpu_scheduler.PDF

  If I give 2 CPUs in a machine, it maps to the physical CPU underlying, or is he underlying host carrots?

  If you have a guest 2vCPU it will use carrots 2pCPU

  And finally, if I assigned 2 processors to each vmachine, will I see performance degradation in the cluster to compare to just assign a?

  You mileage may vary, but it is not considered best practice to create comments vSMP without good reason, it will increase the pressure on the CPU scheduler on the host servers.

  See you soon!

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Tom Howarth VCP / vExpert

  VMware communities user moderator

  Blog: www.planetvm.net

  Writer on "[vSphere of VMware and Virtual Infrastructure Security: securing ESX and virtual environment | ]. http://www.Amazon.co.UK/VMware-vSphere-virtual-infrastructure-security/DP/0137158009/ref=sr_1_1?ie=UTF8&s=books&QID=1256146240&SR=1-1]'. Currently available on roughcuts

• a4302f AMD Athlon 2 X 2. Upgraded to AMD Phenom X 4 I just change CPU and go or redo the BIOS

  Exactly what I need to do. As BIOS, WIN7 64 b reinstall etc. Please...?

  A2N, welcome to the forum.

  Here is the page of Product Specifications for computer.  See the processor upgrade information section.  If you use one of the CPU supported by HP, you shouldn't have to do anything other than changing the CPU.  Be sure to use thermal paste.

  Please let us know if this solved your problem or not.

• C521 - changed CPU and pre-post error...

  Hello

  I'd love help please. I just tried to use a new processor in a C521 and the result is a light amber constant without diagnostic lights and fan at full speed.

  Old processor was Sempron 3400 +.

  New processor is Athlon X 2 5000 b (brisbane) 65 w (ADO500BIAA5DO)

  Board of Directors is HY175

  * Bios version is 1.1.11

  Processor and the radiator cleaned well and apply decent dough. I just wanted some advice before I go back the old fingers processor and the cross which he then published.

  Thank you

  gocfella

  shesagordie,

  I can't locate a 89w 6000 + windsor to cost reasonable only 125w. I'll try to find a 89w 5600 + windsor.

  The stock cooler is certainly well able for fleas 89w I thought it would be safer to stick to 65w? Thank you

  gocfella

  AMD processor-Athlon 64 X 2 Dual Core 6000 + Socket AM2 ADA6000IAA6CZ 89W 3.0GHz

  http://www.eBay.com/ITM/AMD-dual-core-CPU-Athlon-64X2-6000-3-0GHz-socket-AM2-ADA6000IAA6CZ-89W/172149674280

  AMD Athlon 64 X 2 6000 + (3 GHz, 89W) specifications

  http://www.CPU-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000%2B%20-%20ADA6000IAA6CZ%20 (ADA6000CZBOX) .html

  The default heat sink will work with the 89w, either the version of 65w.

  Bev.

  Edited for content

• Get the name of the VM Cluster, host name, CPU and carrots

  Hello

  All of the following code gives the expected results, except for the last line. I can't make it work. What I am doing wrong?

  Get - VM | Select Name, @{N = 'Cluster'; {E = {Get-Cluster - VM $_}},

  @{N = "ESX host"; {E = {Get-VMHost - VM $_}},

  @{N = "NumCPU"; E = {Get-VMHost - VM $_______ |} Select NumCPU}},

  @{N = "Kernels"; E = {Get-VMHost - VM $_______ |} Get - View). Hardware.CpuInfo.NumCpuCores}}

  Thank you!

  There was a missing (in front of your last Get-VMHost. Want to be as fair as the attribute NumCPU, not an object that contains an attribute NumCPU so I changed line 3 a little

  Get - VM | Select Name, @{N = 'Cluster'; {E = {Get-Cluster - VM $_}},

  @{N = "ESX host"; {E = {Get-VMHost - VM $_}},

  @{N = "NumCPU"; E = {(Get-VMHost-VM $_).} NumCPU}},

  @{N = "Kernels"; E = {(Get-VMHost-VM $_ |)} Get - View). Hardware.CpuInfo.NumCpuCores}}

  If you use this for a large number of virtual machines, you can watch by optimizing a bit. Rather call 'Get-VMHost' several times you can restructure a bit then called this is only once

  Get - VM | Select Name, @{N = 'Cluster'; {E = {Get-Cluster - VM $_}},

  @{N = "ESX host"; E = {$Script: VMH = (Get-VMHost - VM $_); $Script: VMH.} Name}},

  @{N = "NumCPU"; E = {$Script: VMH.} NumCPU}},

  @{N = "Kernels"; E = {$Script: VMH.} ExtensionData.Hardware.CpuInfo.NumCpuCores}}

  The 2nd piece of code is a little more than 2 x faster than the first since Get-VMHost is not be called multiple times

  Another quick thing, if you are looking for the number of processors (i.e. how much taken) then replace $Script: VMH. NumCPU with $Script: VMH. ExtensionData.Hardware.CpuInfo.NumCpuPackages; the host object NumCPU attribute is actually the number of cores that can be a bit misleading

• the clients VMware CPU and CPU cores

  Hello

  I'm looking a bit and I know that for the physical esx host you can get information about the cpu and carrots.

  When I check the same for vmware customers, I only get the info from the cpu. For License audit of needs and so on it would be useful that this info could be separated as follows:

  Get - VM | Select Name, NumvCPUs

  Does anyone have a suggestion?

  Pegasjus

  Try this

  Get-VM | Select Name,  @{N="CPU Sockets";E={$_.ExtensionData.Config.Hardware.NumCPU}},  @{N="Cores per Socket";E={$_.ExtensionData.Config.Hardware.NumCoresPerSocket}} 
  

• Change of motherboard, cpu and ram by using the version of upgrade of windows 7

  I plan on upgrading my motherboard, cpu and ram. I am using windows 7 Home premium that I have updated from xp using a retail upgrade disc that I bought from a company of national computer supplies. Should I have any problems activating this the wrench that came with the drive. I have read several posts on this but can't seem to find a definitive answer. Help, please!

  Well, Windows XP and Windows 7 are versions of upgrade as you claim, that means XP used a qualifying version of Windows that is pre-installed with the system used the upgrade of the command.

  This means, Windows XP and Windows 7 are both related to this version of Windows that came with the system. Because the copy of the original Windows supplied with the system would have been an OEM license, which means, Windows 7 and XP have more rights to transfer if you change the motherboard.

  You can always try a clean install with upgrade.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Can I change the CPU and the GPU on my Satellite L500-210?

  Can I change the CPU and the GPU on my Satellite L500-210? If so, what is compatible?

  Memory DDR3 2 x 2024 (4096 MB)
  Chipset GM45
  BIOS 2.10 05/06/2010
  Socket P (478 pin FC - PGA microphone)
  currently INTEL DUAL - CORE T4500 2x2.3 GHz x 64
  GPU: Ati Radeon HD 4500 series 512 MB

  I can put a CORE 2 QUAD for example 9000 / 9100 / 9200?

  Before starting to discuss this review, please http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm at first.

• Can I change CPU, RAM AND graphics in HP Commpac D220?

  Hello! Thanks to the time to read this topic, I have a question on my hp compac D220 pc so I hope you will tell me the answer!
  IM runing windows 7 now and try to install windows 8.1 but IE NX unsupported. So I decided to change my processor and the extra ram of 1 GB ad, and the new graphics card but I don't know that the graphics card & CPU (last) support my pc.
  Here is my pc in detail.
  1.80 ghz, 180 GB HARD drive and 1 GB of ram, motherboard AMIBOIS, Windows 7 running. So suggest
  me that I buy a new pc or
  change cpu, ram and graphics card.

  Hello

  As it is an OEM machine, you will not be able to replace the CPU this processor is specifically compatible with OEM motherboard. If you are looking to change the CPU, RAM and GPU, you really can both do you a favor and buy a new machine all together, or build your own.

  Kind regards

  Patrick

• Change it back Cpu and memory settings back to normal.

  Hi all

  We have an environment vSphere with 50 guests and 800 mV.

  For some reason any environments with limited resources in most of our VMS is strange, for example actions customized for Cpu and Mem are value.

  There are also limits on some virtual machines...

  We do not want its limits and reserves, we do not want custom values.

  We want it to be default, for example 'Normal' without reserves or limits.

  Now we are VMs 'right click' and change the CPU and MEM value to normal, we also check the unlimited area.

  It of a very boring job and takes a lot of time...

  Is this possible to do with PowerCli?

  Concerning

  Tyler

  Arnim code will work of course, but why use a SDK method when there is a cmdlet to do.

  This will outline reserves to 'normal' and the limits of 'unlimited '.

  $vmName = 
  
  Get-VM -Name $vmName | Get-VMResourceConfiguration | `
       Set-VMResourceConfiguration -CpuSharesLevel "Normal" -MemSharesLevel "Normal" -CpuLimitMhz $null -MemLimitMB $null
  

  And to do for each host, you use the script logic 2nd Arnim

  Connect-VIServer "vCenterServer"
  
  Get-VMHost "yourVMHostName" | Get-VM | Get-VMResourceConfiguration | `
       Set-VMResourceConfiguration -CpuSharesLevel "Normal" -MemSharesLevel "Normal" -CpuLimitMhz $null -MemLimitMB $null 
  
  Disconnect-VIServer "vCenterServer" -Confirm:$false
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Get the number of CPU of the machine virtual and carrots

  Hello

  I tried the following, but failed to get the number of CPUS the VM and carrots. What I am doing wrong?

  

  Of course, try like this

  $myCol = @)

  foreach ($cluster Get-cluster)

  {

  foreach ($vmhost in ($cluster |)) Get - VMHost))

  {

  foreach ($vm in (Get-VM-location $vmhost)) {}

  $VMView = $vm | Get-View

  $VMSummary = "" | Select NOMCLUSTER, HostName, VMName, VMSockets, VMCores, CPUSockets, CPUCores

  $VMSummary.ClusterName = $cluster. Name

  $VMSummary.HostName = $vmhost. Name

  $VMSummary.VMName = $vm. Name

  $VMSummary.VMSockets = $VMView.Config.Hardware.NumCpu

  $VMSummary.VMCores = $VMView.Config.Hardware.NumCoresPerSocket

  $VMSummary.CPUSockets = $vmhost. ExtensionData.Hardware.CpuInfo.NumCpuPackages

  $VMSummary.CPUCores = $vmhost. ExtensionData.Hardware.CpuInfo.NumCpuCores

  $myCol += $VMSummary

  }

  }

  }

• MCBUILDER. EXE running rampant, competing with updates for CPU and possibly associated with an update failed chess SP2 and the backup and restore

  Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular reason and hinders attempts to install programs or updates vista hogging resources. This can be associated with a problem that has arisen since June because I am not able to perform backups or set restore points (gives the error "0 x 81000101 the creation of a shadow copy has timed out"). I tried to install SP2 in the hope that it will not solve the problem, but the failure of installation and install KB947821 doesn't seem to work either. As the restoration of the system is defective, I would be grateful for the pointers to the resolve or completely remove this mcbuilder problem.

  You have COMODO or AVG Antii-virus installed on your system?  It is known problems with these two programs and MCbuilder.exe.  I don't have Microsoft Resource Builder Cache as a service in the Services (so I can't activate or deactivate it)-you which version of Vista to help (bit, SP-number version)?  I have 32 bit Vista Business SP2. I see no way to turn it off in order to close it with the Task Manager when it is - with the exception, but who could become annoying if it happens frequently and with multiple instances.  I could find nothing useful in Knowledge Base Microsoft on it hogging resources although I've seen a few threads using Bing (which is where I came up with COMODO and AVG anti-virus conflicts).

  You can be infected by malware (which may be the origin of the program to activate and run "without reason"). While in Test Mode safe mode (press F8 during startup and select mode safe mode with networking repeatedly) to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after finishing all the scans and see if the problem has been resolved.

  Try a system restore to a point in time BEFORE the problem started (which can be a problem if it began all the way back in June - you should have posted here then when this process would probably have worked).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points (but I doubt that you will have a pretty far back and forth to the system restore may not be a viable option).  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  I bet there is something involving the program or associated with this program.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem (probably the SFC command or controls anti-virus).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  BTW, for update of the problems you are having with SP2, post on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in update issues will be happy to help you with your concerns and get SP2 running on your system (perhaps despite this particular problem).  As you say, it can even solve the problem - who knows.

  Good luck!
  Lorien - a - MCSE/MCSA/network + / A +.

• MacBook Pro 17 "middle 2010 2, 66 GHz Core i7. Problems with CPU and memory.

  EtreCheck version: 3.0.5 (309)

  Report generated 2016-09-26 08:52:41

  Download EtreCheck from https://etrecheck.com

  Time 02:19

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: No problem - just check

  Hardware Information: ⓘ

  MacBook Pro (17-inch, mid 2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro6, 1

  1 2.66 GHz Intel Core i7 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 167

  Video information: ⓘ

  Intel HD Graphics

  NVIDIA GeForce GT 330M - VRAM: 512 MB

  Color LCD 1920 x 1200

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  SAMSUNG SSD 840 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  SSD of Macintosh (disk2) /: 998,97 (Go 117,08 free)

  Storage of carrots: disk0s2 999.35 GB Online

  SAMSUNG SSD 850 EVO 500 GB disk1: (500,11 GB) (Solid State - TRIM: No.)

  EFI (disk1s1) < not mounted >: 210 MB

  SSD500GB (disk1s2) / Volumes/SSD500GB: 499,76 GB (260 MB free)

  USB information: ⓘ

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com. AppBox.AppBox.plist

  ~/Library/application support/AppPolicy/AppBox - i-c 748931 - isn 6A4BB6B7-28E4-416D-BE5C-0AE3D10382ED

  ~/Library/Safari/extensions/SlickSavings.safariextz

  2 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/VirtualBox

  [loading] org.virtualbox.kext.VBoxDrv (5.1.6 - 2016-09-19) [Support]

  [loading] org.virtualbox.kext.VBoxNetAdp (5.1.6 - 2016-09-19) [Support]

  [loading] org.virtualbox.kext.VBoxNetFlt (5.1.6 - 2016-09-19) [Support]

  [loading] org.virtualbox.kext.VBoxUSB (5.1.6 - 2016-09-19) [Support]

  / System/Library/Extensions

  com.olympus.DSSBlockCommandsDevice [no charge] (2.0.0 - 2016-09-13) [Support]

  Launch system officers: ⓘ

  [no charge] 8 tasks of Apple

  tasks of Apple 155 [loading]

  [running] Apple 76 jobs

  Launch system demons: ⓘ

  [no charge] 45 Apple jobs

  [loading] 158 jobs Apple

  Apple tasks 87 [performance]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loaded] org.virtualbox.startup.plist (2016-09-19) [Support]

  User launch officers: ⓘ

  com.appbox.AppBox.plist [running] (2016-09-11) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  com.spotify.webhelper.plist [running] (2016-09-18) [Support]

  [loaded] org.virtualbox.vboxwebsrv.plist (2016-09-19) [Support]

  Items in user login: ⓘ

  Mac Fan Control application (/ Applications/Mac Fan Control.app)

  iTunesHelper application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Plug-ins Internet: ⓘ

  Silverlight: 5.1.50709.0 - SDK 10.6 (2016-09-22) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-08-12)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  Default browser: 601 - SDK 10.11 (2016-08-12)

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-05-22)

  QuickBrowse - Catalin Andrei Vasiliu - http://www.unionsoftwareonline.com (2016-04-06)

  Slick savings (2015-10-03)

  EverNote Web Clipper - Evernote Corp. - http://evernote.com (2016-07-23)

  3rd party preference panes: ⓘ

  Flash Player (2016-08-30) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh SSD: Disc size: 998,97 GB disc used: 881,89 GB

  Destinations:

  LaCie 2 TB TC [Local]

  Total size: 2.00 TB

  Total number of backups: 69

  An older backup: 02/09/16 10:58

  Last backup: 22/09/16 21:02

  Backup disk size: too small

  Backup TB 2.00 size < (disc 881,89 GB X 3)

  Top of page process CPU: ⓘ

  70% callservicesd

  57% findNames

  20% com.apple.WebKit.WebContent (26)

  accountsd 18%

  com.apple.AddressBook.ContactsAccountsService 17%

  Top of page process of memory: ⓘ

  2.41 GB com.apple.WebKit.WebContent (26)

  649 MB kernel_task

  Safari of 549 MB

  Mdworker (15) 238 MB

  Dropbox 156MO

  Virtual memory information: ⓘ

  1.62 Go free RAM

  6.37 GB used RAM (2.63 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  26 September 2016, 08:49:12 self test - passed

  September 2, 2016, 20:53:40 /Library/Logs/DiagnosticReports/Kernel_2016-09-02-205340_[redacted].panic [details]

  Files deleted by EtreCheck: ⓘ

  On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com. LiveShoppers.agent.plist

  On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com. Software - Updater.agent.plist

  On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com.unionsoftwareonline.AppMonitor.plist

  On 26 September 2016, 08:39:42 - / Library/LaunchAgents / com LiveShoppers.agent.plist

  On 26 September 2016, 08:39:42 - Library/LaunchAgents/com. Software - Updater.agent.plist

  26 September 2016, 08:39:42 - ~/Library/Safari/Extensions/Ebay Shopping Assistant.safariextz

  On 26 September 2016, 08:39:42 - ~/Library/Safari/Extensions/Searchme.safariextz

  What are the symptoms you experience that lead you to believe that there are problems with the CPU and the RAM (or is it storage?)?

  Ciao.

• Hotmail has suddenly changed appearance and now present on the top of the page blue with lines. I have a screenshot...

  Run Firefox 15.0. Hotmail has suddenly changed appearance and my page is not at the bottom of the screen. The top 5/6 of the page is a series of horizontal blue stripes. Text in the blue section is the Windows Live titles such as ' home, Mobile devices, etc. When I try to compose a new message, text in the blue box partially covers the 'To' button, so I need to position the slider at the bottom of the button to enter an address. I have tried Hotmail in IE and it seems fine, so it must be a problem of compatibility between Hotmail & Firefox. Hotmail has not responded to my questions by e-mail. I could understand that if this happened at the beginning of a session, just after I have lights, but this happened after, I had been active in Hotmail and other sites. Other sites are not affected, just Hotmail and only in Firefox.

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Already tried safe mode?

  • https://support.Mozilla.org/KB/safe+mode

• Window Media Player.exe using 100% of CPU and memory

  I have a Pavilion dv4-2145-dx Windows 7 Ultimate SP1, 4 GB of memory. Windows Media Player.exe supports my CPU 100% usage and it is striking all my memory - 4 GB.   It started right after I set up a homegroup.

  I had to go into Admin/service and change the Startup Type to disabled for:

  • Windows Media Center Receiver Service
  • The window media services planning service
  • Windows Media Player Network Sharing Service

  I tried setting services to manual, but Windows Media Player has yet caught all the CPU and memory, he could then I disabled all the.

  I do not know how to disable homegroup and Windows Media Player services work together so I wonder if everything is always operate has designed with the homegroup and sharing my music.

  Hello

  I think this explains the problem.  The 2 entries here should be deleted, because the first will try to index all of your user profile and the second will attempt to index all of the Windows Partition.

  C:\Users\Rick

  C:\

  To remove them, click to the left of the entrance, highlight it, and then click Remove.  When these two entries have been removed, reboot the laptop and you should find that the problem has been resolved.

  Kind regards

  DP - K