DataFile recover in the event of noarchivelog mode

Similar Questions

• put the offline data file when the database is in NOARCHIVELOG mode

  My question is when the database is in log mode Archive No. I am not able to take the database offline.

  When I tried in my computer I noticed set-aside.

  CASES1:

  SYS > alter database datafile 5 offline;

  ERROR at line 1;

  ORA-01145: offline immediately rejected at least media recovery enabled.

  case 2:

  SYS > alter database datafile 5 immediate offline;

  ERROR at line 1;

  ORA - 00933:SQL not correctly completed order

  CASE3:

  I tried the command drop alter database datafile offline 6; (in NOARCHIVELOG mode) and it is to show the same effect that alter database datafile offline 6; (in ARCHIVELOG mode).
  

  * In NOARCHIVELOG mode are we really drop the data file to use the offline data file? You please tell me the effect of the dropkeyword.

  Oracle protects you. Please review ARCHIVELOG and NOARCHIVELOG mode.

  When you take the database offline in NOARCHIVELOG mode:

  (1) the file is offline

  (2) the RCS in which you took the database offline will be is more to be in the online redo logs

  (3) at this point, you need to perform a media recovery to enable again the file online (ie. restore the database)

  So you can see why you shouldn't do that.

  The DROP Offline command does not actually remove the data file. It removes the control file file details and updates the offline data file. It can be used for purposes of recovery or when you actually plan on deleting data files.

• I built a new system. Transferred to the hard drive and video card, but everything else is new. Restart Windows as it begins to start. I can get into safe mode and found event id 7026 and event id 7001 in the event viewer.

  As mentioned above, this is a new system, but with a more older IDE hard drive with windows xp pack 2 service (I think). When you first start, it says that windows is not stopped correctly and asks me to choose whether to start it normally or without failure or last known working configuration. When I choose to start windows normally, it will load up to a point. The screen of Windows Xp will come with the slide bar. It will then restart. When I choose to start in safe mode, a bunch of 32 file system scrolls upwards on the screen. I don't remember if it of normal or not. He takes over in SafeMode but. I went to the event viewer and got the following errors.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7026

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The next (s) starting or starting system could not load:

  AFD

  Avgldx86

  AvgMfx86

  Avgtdix

  FIPS

  IPSec

  MRxSmb

  NetBIOS

  NetBT

  Processor

  Rdbss

  Rdbss

  Tcpip

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The IPSEC Services service depends on the IPSEC driver service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The Hello Service service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  TCP/IP NetBIOS assistance service depends on the AFD service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  I did find something online that contains all the system boot or start specific drivers. Windows and harddrive was working in another computer just before he was switched. Let me know if you need other information.

  Thank you.

  First of all you are missing probably a number of device drivers, particularly the network card driver and the driver of the motherboard.  Use your XP disk to perform a repair installation.  This should go a long way toward you're going to get.  If your new box has a driver disc that should help a lot.  You can't port XP perfectly the way you did.   It usually requires a repair installation to fix the hardware abstraction layer. Colin Barnhorst

• my cd rom will not completely close and when I close it restarts the computer in safe mode. in the technet event log it says the following: IO_ERR_BAD_BLOCK

  The cdrom will not close completely and it won't open when I push the Open button.  When I manually open with a paper clip then close again he still doesn't close completely and it restarts the computer in "safe" mode  In the same newspaper, it has the following:

  Log name: System
  Source: cdrom
  Date: 20/03/2011-16:18:10
  Event ID: 7
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Jeff-PC
  Description:
  The device, \Device\CdRom0, has a bad block.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7
      2
      0
      0 x 80000000000000
     
      169760
      System
      Jeff-PC
     
   
   
      \Device\CdRom0
      0F0080000100000000000000070004C0000100009C0000C000000000000000000070EB1C000000006378060000000000FFFFFFFF01000000580000C40201000000200A12480200400010000004010000000000000000000048CC860580FAFFFF0000000000000000407B930580FAFFFF806BAC0580FAFFFF6E9D030000000000280000039D6E00000200000000000000700003000000000A00000000110500000000000000000000
   
  

  I'd appreciate any help you could provide.  Thanks in advance.

  Hello

  Looks like the CD-ROM drive is a failure. Uninstall and reinstall the disc and check if this solves the problem. If the problem persists, you should replace the disk.

  To uninstall the drive from Device Manager:
  a. Click Start, then type devmgmt.msc in the start search box then press ENTER.
  b. right-click on the CD and click on uninstall.
  c. restart the computer.

• How to register for an event when the device is connected to the PC in USB mode or sync

  I develop application on blackberry with phonegap.

  I want to hear event when the BlackBerry device is connected to the PC by USB MODE or sync.
  I saw mediagallery and applications Filemanager showing the dialogue that the application cannot be used when connected to the PC in USB mode.
  I want to display dialog similar to my request.
  Can anyone please help on how to do it.

  I saw blackberry webworks API

  public static Boolean blackberry.system.isMassStorageActive)

  who says if massstorage is active or not.

  But I can't keep on request this API every time. I'm looking for an API that gives me the reminder.

  Can you please help.

  On the side of Java, this can be done by implementing a FileSystemListener and the rootChanged method:

  public void rootChanged(final int state, String rootName) {
      if (rootName.equalsIgnoreCase("sdcard/")) {
          if (state == FileSystemListener.ROOT_ADDED) {
              /* SD Card is available. */
          } else if (state == FileSystemListener.ROOT_REMOVED) {
              /* SD Card is not available. */
          }
      }
  }
  

  I was not able to find a corresponding WebWorks API or API community well, so I think you need to create your own custom extension to implement this feature of the listener.
  https://developer.BlackBerry.com/HTML5/documentation/using_javascript_extensions_1866976_11.html

• Is it possible to recover the event and project disappeared?

  As I was highlighting the images of an event, a toddler (not even mine) found the power strip under my desk and I of course wanted to push the bright red light. After the restart, all of the raw images to the event had disappeared. Also, the project we created from the event disappeared. Still in denial of having to start over entirely. Give it to me directly, I can take it.

  In the movies, open Final Cut backups folder, then the folder that contains backups of your work library. Open the backup that was created more recently prior to the incident.

  Russ

• Backup/restore tablespaces in noarchivelog mode

  In our office, there is a box of oracle 10g that is used for testing purposes.
  He got only 1 database, but each user has its own tablespace.
  As it is not a 'live' box, archivelog and flashrecovery have been disabled by the dba likely in favor of speed.
  
  I have a suit of NUnit test that crosses a tablespace, and I'm trying to restore the tablespace before each race.
  In noarchivelog mode, RMAN allows me to take the tablespace offline and create a backup - well.
  Later, I'm capable of taking the tablespace offline again and issue a command to "RESTORE the TABLESPACE.
  But then I can't bring the tablespace online without issuance of an order to 'RECOVER '.
  I tried the NOREDO option but it still says that the file has a media recovery before it can be brought online.
  
  Is there a way to bring the tablespace online without applying REDO logs?
  Backup/restore of tablespace or not possible because of noarchivelog?
  
  Thank you.

  He asks for any newspaper archive, when you turn the fire 'recover' command?

  When you take a tablespace offline, the tablespace is not updated with the oracle's internal clock. So when you try to bring the tablespace online, oracle estimated that the tablespace is not in harmony with the other storage spaces. That is why it requires recovery. If you turn the fire back the command simply updates the tablespace and brings online storage space after applying the data available in the online redo log.

  But if the data has been flushed to redo, then it is difficult to synchronize the tablespace.

  Kind regards
  S.K.

• Can I sync the calendar in offline mode?

  I have setup a personal CalDAV server at home. With Firefox OS (v1.1), I added the external calendar successfully and I can create and edit (does not however remove, but who don't mind) events without problem. Obviously, this works only while I'm connected to my local network. What I want to do is to add events to the calendar in offline mode and when I get, synchronize all these events to caldav calendar. Is there a way to do this?

  Hi lufte.

  This feature is not available in the current version of Firefox OS.

  You can suggest new features and provide feedback to Firefox OS by going to settings > Improve Firefox OS > send feedback from Mozilla. Our defence experts review all comments that will help with new features and map future versions of the device.

  In the meantime, I created a ticket in bugzilla so that our engineers can start to investigate:

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=1023061

  Please let us know if you have any other questions.

  Thank you

  -Ralph

• I wanted to shoot penalty, put the computer in safe mode, now its blocked, firm FF 3 times, computer rebooted, still in safe mode.how out safe mode

  I wanted to do in the event of problem, I put the computer in safe mode and now I can't get out of safe mode. I closed FF & computer restarted 3 times, even shut down the computer, still in safe mode. What should I do to get out of safe mode?

  I gave up and took my laptop to the Apple store... everything is ok now... I don't know what they were doing.

• Problems using the event to write new parameter values to VISA structure

  Hi all

  I created a VI to read an Omega flow meter. It is possible to change setpoint (setpoint (0-2) SLPM) of the meter and the gas (O2, CH4,...). To read instrument I write its ID (A-Z), followed by a carriage return, for example: A + 0x0D

  I created a VI with the events to write only the parameters to the instrument when a value is changed. My VI works but from time to time, it does not write the parameter change (gas or set point). I think that is has something to do with the while loop containing an entry VISA.

  Open FMA contains parameters and VISA opend

  Case of timeout initialize writing gas and setpoint for the first time

  Other events are for the change in the value of setpoint and gas

  How can I make sure that any change of setting will be writtent the instrument?

  Thank you

  Salvation Bass,

  Well, it is true that I lose this way time-out feature.

  No, you do not lose this feature. You put in a different position.

  You must call it BEFORE your loop!

  I'm not sure that I am following on this one there

  Why are you not sure? You have a large number of constants "0d" and it would be great to see that they are displayed in HEX mode instead of the normal display mode.

  The new VI manages events sometimes... but sometimes, missing a few changes... I think it is because there is an entry in the while loop. Do you have any idea how to prevent this?

  Never, NEVER use parallel loops to write and read on the same device on your serial port!

  How do ensure you that you always get the right answer to your order sent before?

  What is the purpose of using a second loop here? A loop with no wait States?

• structure of the event with a local variable

  Hello world... I tried to make a simple program with the structure of the event in Labview.
  I need to show a value in a table, when an external signal changes its value. (I read a lot of discussions and many documents and I don't understand the thing... Sorry)
  I want to say that I am getting a value of temperature of a sensor in a controller, it works in asynchronous mode sensor, so that the detector Gets a new value in different sampling rate.
  So the PLC program changes the State of a Boolean variable simple that in Labview, indicates that there is new data (newdatareceived---> 1,0,1,0,1,0...)
  I need this draw Labview (valuereceived) value in a chart when this variable (newdatarecived) changes.
  My problem is that the table always puts a value according to the cycle time in its loop and resumes the values... (I tried, with dynamic events and signage value... and I got the same result... It works fine).
  Thanks in advance.

  And the other way:

  

  Thanks for your time again.

  STPG wrote:

  I've been doing a little test with xygraph and the example works now (thanks!) but I have a doubt, is this the right way or is there a better way?

  No, this code is meaningless. You write new (mostly the same!) points to the graph xy with each iteration (actually at twice the speed at which data can actually happen: 100 ms vs 200ms!), tax system unecessarily and more internal data structures like crazy.

  All you need is a simple loop with a single structure of matter which is true if the Boolean value is different from the previous iteration. Currently, you must add a point (the time for X, the value in Y) to the xy graph. Here is a quick sketch. (You can either use the meter or the elapsed time for X, according to your needs, so change if necessary).

  Events are mainly for the interaction with the user in order to avoid the loop turn unless necessary. Here you are already running a loop to interrogate the instrument and you can easily have the graphic way the same loop. Right?

  You should also be aware that the execution order is determined by the flow of data and not in a horizontal position. If it's important that OCX nodes running first in an iteration, you create a dependency of data (for example with the wire of the error). Horizontal compensation has no effect. The structure of sequence on the left has also does no work, then why is it there?

• controls and structure of the event

  I currently have a while loop that works in data flow.
  I'm hoping to change this work like a while loop and inside the while loop. It will have a structure of the event.
  Currently, if the ONLY STEP is set to TRUE.
  Then, he will enter a mode of manual programming.
  If I press CONTINUE. He will return to the automatic mode
  If I press ADV. He'll jump the current position.
  If I press stop. It stops at the current position
  If I press ADV & STOP. It will stop the program
  If I press ADV & STOP & DELETE. It will stop and remove the current log file.
  I don't know if anyone can point me in the right direction.
  It seems that its impossible?

  
  

• Structure of the event by tabs design pattern

  Hi all

  Worked on a user interface using a model of design of event structure to respond to pressure on the button.

  The interface got big enough and I decided to organize buttons into groups and put them on different tabs (to the Group feature).

  However, when I put a case all about the structure of the event statement to separate the code on the pattern too I was not able to switch tabs and the interface gets stuck.

  Attached example.

  I could put all the events button of different tabs in a structure of the event, but thought that this could get very large and unreadable. Is there a standard design model that responds to this problem?

  Thank you very much.

  Select this option.

  Medwar19 wrote:

  Hi all

  Worked on a user interface using a model of design of event structure to respond to pressure on the button.

  The interface got big enough and I decided to organize buttons into groups and put them on different tabs (to the Group feature).

  However, when I put a case all about the structure of the event statement to separate the code on the pattern too I was not able to switch tabs and the interface gets stuck.

  Attached example.

  I could put all the events button of different tabs in a structure of the event, but thought that this could get very large and unreadable. Is there a model of design standard that meets this problem?

  Thank you very much.

  Select this option.

  Standard version?

  If you the tabs correspond to States so high kitted out to call a Subvi who is responcible for this State.

  

  Then inside the Subvi handling state that I use recording dynamic event to implement the events I have to the service so that in this State.

  This is what one of these sub - VI may look like.

  

  What makes very clearn that we treat in Thøis operating mode.

  Ton wrote a nugget on registration of dynamic event which can be found here.

  Ben

• Structure of the event does not clear the queue after his release from the Subvi

  OK I'm not sure if this is a stupid question or not...

  I was trying just a few tips and stumbeled on this problem...

  So I created a sample (not exactly)

  In qqq_Main.vi just press PressMe

  (it opens a Subvi qqq.vi)

  There are two buttons to stop "Alt1" and "pylone2".

  To close the Sub - VI press either on "pylone2".

  or press "Alt1", then "pylone2".

  with the latter method of the value of closing change pylone2 is registered outside the while loop and after the closure of the Subvi should not it be erased? (Or should manually clear us it?)

  For this reason not clear, the second time I press 'PressMe' change the value of pylone2 even goes off before you press anything

  I can't look at your code at the moment, but according to your description, it seems that the system works as expected. I guess you do a completely static record of events (open the event configuration dialog box and select the controls and event).

  The first thing to clarify is your use of the term "registered". In this case, it's a problem, because the registration in the context of the protests means asking to receive the event when it happens.

  Now that you know it's important to understand where the recording is happening, because that's what determines which events are stored in the queue. When you use this type of static record, registration happens from the VI the event structure is in run mode (Note: this does not mean that the VI is actually running, but just that it's the of running or reserved for the race) and the cancellation of registration only happens when the VI mode of execution. Who is right for which you get the events in the queue of the previous run of the VI - the VI is still in run mode, then the event is added to the queue and still waiting in the queue until the structure of the event to run again.

  You can work around something like that by switching to dynamic registration of events, where you can unsubscribe to empty the queue at the end of the VI, but requires more code. Also, in 2013 LV there are a few features added to events that could allow to do this statically (I don't study all the additions, so I don't know if this is possible for static recording).

  There is a good presentation on the events of NIWeek 2013 by Jack Dunaway. You can find details of how to download the video here - http://lavag.org/topic/16091-ni-week-2012-videos/

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.