DataGuard enviornment, rman duplication showed validation failed

Similar Questions

• of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or it was partially signed but not totally witht the

  media center ehshell.exe received the error message 205 units

  of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key

  After you have installed the XP SP3.

  How can I fix this error.

  Media Center worked fine until I installed SP3.

  Hello

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  (a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."

  (b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.

  (c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

  (d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

  If the problem persists, follow these steps:

  You try to run the following commands to re-register all Media Center services:

  (a) close Media Center

  (b) click on the start menu, choose run and type cmd , and then press ENTER.

  (c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:

  · Regsvr32.exe atl.dl

  · C:\WINDOWS\eHome\ehl Sched /unregServer

  · C:\WINDOWS\eHome\ehSched/service

  · C:\WINDOWS\eHome\ehRecvr /unregServer

  · C:\WINDOWS\eHome\ehRecvr/service

  · C:\WINDOWS\eHome\ehRec.exe /unregServer

  · C:\WINDOWS\eHome\ehRec.exe/regserver

  · C:\WINDOWS\eHome\ehmsas.exe /unregServer

  · C:\WINDOWS\eHome\ehmsas.exe/regserver

  · Restart the Media Center

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Validation failed secret fields

  I have a problem in my application of adf for the change password page and page edition user.

  I have a validator put in place on the second of the two password fields (secret af:inputText = 'true') to make sure that the passwords match. If the validation fails, then the value of the field is replaced by ' * ' in the sense of UIConstants.SECRET_FIELD_DEFAULT_VALUE as defined in the trinidad-impl jar.

  I did so that this problem no longer occurs on any other communication by deleting the values on the presentation, so that all other errors (such as existing username or sufficient permissions) do not cause, but validation occurs before the bid if it does not work with password incompatibility.

  I tried to hide the values of bean to support both in the validator if field values we reach the State of failure, but seems to have absolutely no effect, I guess because it passes the value to validate, and so uses to display anything.

  I need to go through the validator rather that just do not reach the presentation, because we need to highlight the field with the error rather than just giving the General error popup. I tried different ways to try to define the State of the error of the field but nothing showed up without lifting, the exception of validator that then triggers the change in the value to «*»

  Is it possible to erase the value of a field that is currently being validated or to ignore the value of secret field Reset? The documentation says it changes the value on the submission, but since the validator keeps it from getting the listener to the effective presentation, then is there a way to raise awareness that this is not presented yet? Or to force validation to occur without pressing the submit button? I tried to adjust autosubmit = "true", but it does not work unless they navigate away from the field, which they do not if it is the last field of a password change form, so I don't think it's an option.

  We use the ADF 11.1.1, but if there is a solution available in 12.1.2 then I can wait until we are able to ship with that instead.

  Thank you in advance, please let me know if there is anything I missed. (We are not using JDeveloper, just in case anyone wants to know)

  The answer to the failure of validation of downloads makes unmodifiable of Timo Hahn also seems to be applicable to this question.

  In the validator just before launching the ValidationException call resetValue() on the text field component and local value will be reset to empty and is not reset to "*".

• Catalog object privilege validation failed

  Hello
  I created a new user and assigned to the group 'BIConsumers '. If I want to change it to «my dashboard "as showing following error.»
  * Error: *.
  Catalog object privilege validation failed for user path/users/mkuser/_portal/page 1.
  
  Currently you do not have sufficient privileges to save a report page or dashboard that contains the HTML markup. Dashboard contains HTML tags customized for static text.
  
  How to solve this problem? Please let me know.

  Hello

  What version do you use? If your using obie10g add just "everyone" just add another required roles.

  Go to settings-> directors-> Manage privileges-> "answers".
  Here you can see - 'Save content with HTML markup' next to it, you will see "presentation server administrators.
  Click on it and change for all a required user or group or role, or 'BIConsumers' just add and test
  And save the changes.

  If its not affect please restarts the BI Services now, you can add the content and it will not error messages appear
  (FYI: for testing add the BI Administrator role)

  Note: for your case number must assign catalog eats Group privileges. (is required when his case refused questions) If none of the work top please add BI Administrator role and then test 1

  Reward points and close the response unit to help others with the same question

  Thank you
  Deva

• Rich Table: entity validation fails, but the user can change the record! : O

  Hello
  I develop with JDeveloper 11.1.2.1.0 and I have the following problem. I have a rich table editable according to entity/view with a line entity level validator method that checks the consistency of rank according to custom rules.
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?
  Thank you
  
  Roberto

  Roberto R SCC wrote:
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I > know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?

  When you change a line, it is the currentRow on the iterator. You do not want any line to become the currentRow.
  I would go to this topic, in this way: substitute the selectionListener table and the listener to custom selection, check if the current currentRow (the one you are editing) isValid (EntityImpl::isValid).
  Proceed with the treatment of the selection event only if it is validated... You could even show an error or a warning message asking the user to provide valid data and even commit the line before choosing another.
  (Sorry, don't have an example of a code of practice now)

• Check if validation failed on a page

  Is APEX 3.2, possible within the conditional display of a report to check if validation failed on the last presentation of the page?
  We have a report with a custom in the top search box. When you press search some validations of fire to ensure that the data entered in the search box is valid (invalid part number etc) which works very well. There are however some areas we need to be digital - the alert postings this correctly however, the region still displays and therefore has an error ORA-01722 invalid number. I want to make is that the region appears under condition so that it shows that if no validation has failed.
  
  Thank you
  John

  Try the built-in * [No.] types of condition appears Validation errors online *.

• How can I install flash Adobe player cuz I tried and after all the process shows download failed!

  I try to use the facility in the way they show on the page here, but at the end of the process shows download failed!

  Edit by G225: Switch to Windows.

  You will find support for Adobe Flash Player in this forum: http://forums.adobe.com/community/webplayers/flash_player

• MS has put the "validation failed" popups on my laptop that wouldn't go away even if I followed all the steps possible to validate my software as a real. How can I go there my LT?

  MS has put the "validation failed" popups on my laptop that wouldn't go away even if I followed all the steps possible to validate my software as a real. How can I go there my LT?

  http://support.Microsoft.com/kb/921914

• Could not open the zone alarm file:Validation failed for c\windows\system32\zpeng25.dll.

  All of a sudden I can't activate my zone alarm service, because I gives me a message that the Validation failed for c\windows\system32\zpeng25.dll.  After you receive this message, I ran software to fix registry errors, but that has not fixed the problem.  I am able to follow the explicit instructions so careful instructions are given.  Thank you for your help.

  Do Zone Alarm support say when contact you? What responses did you get when you posted in their forums?
  http://forums.ZoneAlarm.com/index.php

• When you try to run GTA IV, it shows seculauncher failed to start this application

  Original title: what should I do?

  I downloaded GTA IV yesterday.when I click on it to run it, it shows "seculauncher failed to start this application [2000] Please suggest me what should I do to run it on windows 7 32 bit?

  -C' is one of the few games using Compatibility Help settings with.

  Select XP sp2 or Vista sp1 and the 'run as admin ' option should help the flow of the game.

  (R / click on the LaunchGTA4.exe in the game install folder and go to Properties > compatibility.)

  -This issue may also come from a corrupted C++ reinstall (from when the game reinstall C++).

  If you use the floppy based of the game version you can find an installer for the C++ version uses the game

  the disk- GTAIV > Redistributable > vcredist_x86.exe.

  -If the installation folder using the Steam version of the game than the redistributable folder must be in the games.

  -C' is just two of several possible problems with this game.

  Another issue, you may face is with Games For Windows Live.

  The game moved with an obsolete GFWL. Install a newer version of GFWL can also help.

  Download: Details games for the installation of software for Windows 3.5 - Microsoft Download Center - Download

  -If you have problems with GFWL after installing version 3.5, you will need to download what is called a fix xliveless

  (installation folder replaces the xlive.dll file in the games). If use you this fix, you can play good solo.

  http://www.GTA4-mods.com/tools/xliveless-097b-F2408

  For more information, visit one of the many mod GTA4 and forums sites.

  -You will also need to patch the game. There are several patches, but I stopped to patch 1.4.

  Site of GTA, Rockstar has only the patch 1.7 for the moment, but I don't know if this fix is cumulative.

  or if you need to use some of the previous patches first.

  Note this hotfix 1.7 improves the shadows so if your machine is not strong eno ugh to use the new

  shadows, you need to lower the shade setting in the games settings.

  https://support.RockstarGames.com/HC/en-us/sections/200034196-GTA-IV-patches-and-title-updates

  Patch 1.0 - 1.4 (other GTA sites may also patch 1.5 and 1.6).

  http://www.thegtaplace.com/downloads/C76-GTA-IV-patches

  .

• Error: Printer Validation failed

  Hi guys, new here.

  I'm trying to print via Microsoft Word on my printer HP Photosmart 6C100 series of my laptop HP Envy of m6 through a wi - fi connection, but by clicking on the printer 'HP ePrint', I get the error 'printer Validation failed. I use Windows 8. If someone could help I would be very happy, thank you.

  Ross

  This printer does not work with the ePrint driver.  That's why you get this error.  I don't really know why it's even pick up the printer.  To get the printer to work with your computer, you can use the InOS driver that is built into Windows 8, or you can use the full download of software and the driver for HP.  I'll link the download below.  The InOS driver should just pick up and install the network printer without telling you.  If this is not the case, try to install the software below to print and scan with the C6180.

  HP Photosmart full feature software and drivers

• FB 4.5.1 - AIR 2.7 Validation failed

  Hello

  I'm having a problem to create my application with the new PlayBook 1.1 SDK in Flash Builder 4.5.1. Unlike this post, I have no problem building when I put http://ns.adobe.com/air/application/2.6 "> in my app.xml file." However, when I switch to 2.7, I get an error:

  Error occurred while packaging the application:
  
  Packaging failed:1
  bar-app6316399818209918454.xml:
  error 102: Invalid namespace http://ns.adobe.com/air/application/2.7
  
  Error: AIR validation failed
  

  Am I missing something? How can I solve this problem?

  Thank you in advance for your help!

  You can just use AIR 2.6 without any problem. It isn't really much of a difference from the point of view API between 2.6 and 2.7.

  If you really want to use 2.7 you need to overlay the AIR SDK 2.7 on your SDK 4.5.1.

  Adobe has an article on how to do this. http://kb2.Adobe.com/CPS/495/cpsid_49532.html

• My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any mention of this code error or failure anywhere

  My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any reference to this error code or failure anywhere, either in the "help", on Microsoft Support sites, or on the community boards.

  I have updated all drivers for this graphics card (AMD Radeon HD series 7900) and all the surrounding drivers with the AMD software.

  I can't find any information, so I don't know if I should get a new video card (which seems to work very well) or if I should just ignore it.

  Someone at - it ideas?

  Raven

  Computer Alienware Aurora R4
  Windows 7 x 64 OS
  AMD Radeon HD series 7900 graphics card

  Original title: Error Code WVC07-LB8

  Hello

  As you mentioned that you have already updated the AMD graphics card drivers, could you let us know if you see any exclaimation or any error in the device under graphics card Manager?

  Are you facing any problem with your graphics card, video, or your screen resolution?

  As Alien Autopsy Global System Tests showed you the error, I suggest you to get tap dell JDM for more support asiistance if you have any problem with Yon graphics/video card or screen resolution.

  For your information: once you uninstall your graphics card drivers, windows has its own built-in drivers that will automatically charge the generic drivers. If in case it does not load you can search the hardware changes, this will probably load the generic drivers.

• ORA-04098 trigger 'BANKTRAN_BEF_DEL' is invalid and and re-validation failed

  Hey Experts,.
  
  I created successfully after...
  
  
  create or replace trigger BANKTRAN_BEF_DEL
  before you delete the BANKTRAN
  declare
  weekend_error EXCEPTION;
  not_authentocated_user EXCEPTION;
  Start
  If TO_CHAR(SysDate,'DY') = "SAT" or TO_CHAR(SysDate,'DY') = "Sun" THEN
  RAISE weekend_error;
  end if;
  If SUBSTR(User,1,3) <>'ATN' THEN
  RAISE not_authentocated_user;
  end if;
  EXCEPTION
  WHEN weekend_error THEN
  RAISE_APPLICATION_ERROR (-20001,
  "Destruction not allowed weekend");
  WHEN not_authentocated_user THEN
  RAISE_APPLICATION_ERROR (-20002,
  "Destruction permitted by users of authentocated");
  end;
  
  
  but when to delete records using query removes from BANKTRAN
  
  get the below error
  
  ORA-04098 trigger 'BANKTRAN_BEF_DEL' is invalid and and re-validation failed
  
  Published by: SShubhangi on January 7, 2013 16:21
  

• RMAN duplication and expiration of the directives on the environment of data warehouse

  Operating systems: Windows Server 2008
  DB: Oracle 11 g 2
  
  Are there guidelines how often one should do a RMAN duplication and assign an expiration on archivelogs for data warehouse environments?
  It me appears once a day would be enough for overlapping in a data warehouse environment which is updated nightly. Expiration, I don't expect less than 1 week.
  See you soon!

  I agree with damorgan

  See the links for the best practices below.

  http://www.Oracle.com/technetwork/database/features/availability/311394-132335.PDF
  https://blogs.Oracle.com/Datawarehousing/entry/data_warehouse_in_archivelog_m

  Hope this helps,

  Concerning
  http://www.oracleracepxert.com
  Understand the power of the Oracle RMAN
  http://www.oracleracexpert.com/2011/10/understand-power-of-Oracle-RMAN.html
  Duplication of data base RAC with RMAN
  http://www.oracleracexpert.com/2009/12/duplicate-RAC-database-using-RMAN.html