Check if validation failed on a page

Similar Questions

• What tool can be used to check the validity of the drivers

  original title: drivers

  does anyone know of a utility driver... free preferbly :)... outside the windows update that checks the validity of the drivers with a repair with a single click to delete / update etc... Thank you

  Hello

  To add the good advice of T.G.:

  Automatic driver update programs often fail, and when this happens, the results can be a nuisance
  to a disaster. Manual update of the pilots is my preferred method.

  Maybe need of these:

  This utility, it is easy see which versions are loaded: (this is not an automatic update of the driver
  It just allows you to easily see information on the drivers of program.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Validation failed secret fields

  I have a problem in my application of adf for the change password page and page edition user.

  I have a validator put in place on the second of the two password fields (secret af:inputText = 'true') to make sure that the passwords match. If the validation fails, then the value of the field is replaced by ' * ' in the sense of UIConstants.SECRET_FIELD_DEFAULT_VALUE as defined in the trinidad-impl jar.

  I did so that this problem no longer occurs on any other communication by deleting the values on the presentation, so that all other errors (such as existing username or sufficient permissions) do not cause, but validation occurs before the bid if it does not work with password incompatibility.

  I tried to hide the values of bean to support both in the validator if field values we reach the State of failure, but seems to have absolutely no effect, I guess because it passes the value to validate, and so uses to display anything.

  I need to go through the validator rather that just do not reach the presentation, because we need to highlight the field with the error rather than just giving the General error popup. I tried different ways to try to define the State of the error of the field but nothing showed up without lifting, the exception of validator that then triggers the change in the value to «*»

  Is it possible to erase the value of a field that is currently being validated or to ignore the value of secret field Reset? The documentation says it changes the value on the submission, but since the validator keeps it from getting the listener to the effective presentation, then is there a way to raise awareness that this is not presented yet? Or to force validation to occur without pressing the submit button? I tried to adjust autosubmit = "true", but it does not work unless they navigate away from the field, which they do not if it is the last field of a password change form, so I don't think it's an option.

  We use the ADF 11.1.1, but if there is a solution available in 12.1.2 then I can wait until we are able to ship with that instead.

  Thank you in advance, please let me know if there is anything I missed. (We are not using JDeveloper, just in case anyone wants to know)

  The answer to the failure of validation of downloads makes unmodifiable of Timo Hahn also seems to be applicable to this question.

  In the validator just before launching the ValidationException call resetValue() on the text field component and local value will be reset to empty and is not reset to "*".

• Catalog object privilege validation failed

  Hello
  I created a new user and assigned to the group 'BIConsumers '. If I want to change it to «my dashboard "as showing following error.»
  * Error: *.
  Catalog object privilege validation failed for user path/users/mkuser/_portal/page 1.
  
  Currently you do not have sufficient privileges to save a report page or dashboard that contains the HTML markup. Dashboard contains HTML tags customized for static text.
  
  How to solve this problem? Please let me know.

  Hello

  What version do you use? If your using obie10g add just "everyone" just add another required roles.

  Go to settings-> directors-> Manage privileges-> "answers".
  Here you can see - 'Save content with HTML markup' next to it, you will see "presentation server administrators.
  Click on it and change for all a required user or group or role, or 'BIConsumers' just add and test
  And save the changes.

  If its not affect please restarts the BI Services now, you can add the content and it will not error messages appear
  (FYI: for testing add the BI Administrator role)

  Note: for your case number must assign catalog eats Group privileges. (is required when his case refused questions) If none of the work top please add BI Administrator role and then test 1

  Reward points and close the response unit to help others with the same question

  Thank you
  Deva

• Simple validation fails.

  Hi all.
  
  I created this simple validation on "processing of page - validation". Type: function return error text. P1_FE_DESDE and P1_FE_HASTA are date values.
  
  As simple as it is, the validation fails. Note I m reading these two dates, so I don't know when it must fail.
  
  If: p1_fe_desde >: p1_fe_hasta then
  raise_application_error (-20011,'s Rango invalido.) Date desde ' | : p1_fe_desde: ' hasta date ' | (: p1_fe_hasta);
  end if;

  Apex renders the page as a date picker who then instructs the browser to use the jquery library to display a calendar for the user to select a date in a beautiful interface, the data on the web page is not typical, is a string. My advice is to be careful while waiting for the page to do something for you. Basically when using: APEX_PAGE_ITEM in a validation or v ('MY_PAGE_ITEM') in PL/SQL stored type correctly, i.e. TO_NUMBER and TO_DATE. Its good practice if nothing else.

• Catalog object privilege validation failed for the user.

  Hello
  I'm getting following error after adding HTML tags in 11g dashboard.
  How to set privileges?... Kindly let me know. Thank you.
  
  The error massage:
  Catalog object privilege validation failed for path/users/User1/_portal/page 1 user.
  Currently you do not have sufficient privileges to save a report page or dashboard that contains the HTML markup. Dashboard contains HTML tags customized for static text.

  Hi user,

  Go to settings-> directors-> Manage privileges-> "answers".

  Here you can see - 'Save content with HTML markup' next to it, you will see "presentation server administrators.
  Click on it and change it to "Everyone."

  And save the changes. Restart the BI Services now, you can add the content and it will not error messages appear.

  Thank you.

  Reward points and close the response unit to help others with the same question :)

• Rich Table: entity validation fails, but the user can change the record! : O

  Hello
  I develop with JDeveloper 11.1.2.1.0 and I have the following problem. I have a rich table editable according to entity/view with a line entity level validator method that checks the consistency of rank according to custom rules.
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?
  Thank you
  
  Roberto

  Roberto R SCC wrote:
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I > know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?

  When you change a line, it is the currentRow on the iterator. You do not want any line to become the currentRow.
  I would go to this topic, in this way: substitute the selectionListener table and the listener to custom selection, check if the current currentRow (the one you are editing) isValid (EntityImpl::isValid).
  Proceed with the treatment of the selection event only if it is validated... You could even show an error or a warning message asking the user to provide valid data and even commit the line before choosing another.
  (Sorry, don't have an example of a code of practice now)

• Check Digit Validation

  I use Web determinations - OPA 10.3.
  
  I want to perform the check digit validation on an input field. I have a piece of java code that performs this validation already. How to call this java code when sending the page?

  One way to address the issue would be to write your own event handler. In help, search for "events and event handlers. There is an example of how to write a custom validator screen towards the end.

• Is the way to avoid the loss when a validation fails a form data

  Is how to prevent a data form that is lost when a validation fails?

  It is only an option within a validation:

  Error message > display message error location

  Set it to: on the error Page

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• MS has put the "validation failed" popups on my laptop that wouldn't go away even if I followed all the steps possible to validate my software as a real. How can I go there my LT?

  MS has put the "validation failed" popups on my laptop that wouldn't go away even if I followed all the steps possible to validate my software as a real. How can I go there my LT?

  http://support.Microsoft.com/kb/921914

• of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or it was partially signed but not totally witht the

  media center ehshell.exe received the error message 205 units

  of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key

  After you have installed the XP SP3.

  How can I fix this error.

  Media Center worked fine until I installed SP3.

  Hello

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  (a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."

  (b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.

  (c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

  (d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

  If the problem persists, follow these steps:

  You try to run the following commands to re-register all Media Center services:

  (a) close Media Center

  (b) click on the start menu, choose run and type cmd , and then press ENTER.

  (c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:

  · Regsvr32.exe atl.dl

  · C:\WINDOWS\eHome\ehl Sched /unregServer

  · C:\WINDOWS\eHome\ehSched/service

  · C:\WINDOWS\eHome\ehRecvr /unregServer

  · C:\WINDOWS\eHome\ehRecvr/service

  · C:\WINDOWS\eHome\ehRec.exe /unregServer

  · C:\WINDOWS\eHome\ehRec.exe/regserver

  · C:\WINDOWS\eHome\ehmsas.exe /unregServer

  · C:\WINDOWS\eHome\ehmsas.exe/regserver

  · Restart the Media Center

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Could not open the zone alarm file:Validation failed for c\windows\system32\zpeng25.dll.

  All of a sudden I can't activate my zone alarm service, because I gives me a message that the Validation failed for c\windows\system32\zpeng25.dll.  After you receive this message, I ran software to fix registry errors, but that has not fixed the problem.  I am able to follow the explicit instructions so careful instructions are given.  Thank you for your help.

  Do Zone Alarm support say when contact you? What responses did you get when you posted in their forums?
  http://forums.ZoneAlarm.com/index.php

• Data received, press CHECK BOX to print the last page

  Aloha

  I have an old HP Laser 4200 Jet that has been the back BONE of my business! I worked perfectly except for the last two days!

  He give me a "data received press CHECK BOX to print the last page" and print a portion of the last page with or without printing of the

  previous pages! It just started happening! Over the other day, I have my children of girlfriends! Is it possible that they pressed a button?

  I reset, but this problem persists! Help!

  SLY

  Hi Sly,

  Welcome to the Customer Support Forums!  I'll lock this accidental double post and lead everyone on this subject.  This will keep all your answers in one easy to find place.

  If you have any questions or concerns about this, feel free to contact me by private Message.  Thank you!

  Message edited by SandyD on 06/06/2009 17:07

• Error: Printer Validation failed

  Hi guys, new here.

  I'm trying to print via Microsoft Word on my printer HP Photosmart 6C100 series of my laptop HP Envy of m6 through a wi - fi connection, but by clicking on the printer 'HP ePrint', I get the error 'printer Validation failed. I use Windows 8. If someone could help I would be very happy, thank you.

  Ross

  This printer does not work with the ePrint driver.  That's why you get this error.  I don't really know why it's even pick up the printer.  To get the printer to work with your computer, you can use the InOS driver that is built into Windows 8, or you can use the full download of software and the driver for HP.  I'll link the download below.  The InOS driver should just pick up and install the network printer without telling you.  If this is not the case, try to install the software below to print and scan with the C6180.

  HP Photosmart full feature software and drivers

• FB 4.5.1 - AIR 2.7 Validation failed

  Hello

  I'm having a problem to create my application with the new PlayBook 1.1 SDK in Flash Builder 4.5.1. Unlike this post, I have no problem building when I put http://ns.adobe.com/air/application/2.6 "> in my app.xml file." However, when I switch to 2.7, I get an error:

  Error occurred while packaging the application:
  
  Packaging failed:1
  bar-app6316399818209918454.xml:
  error 102: Invalid namespace http://ns.adobe.com/air/application/2.7
  
  Error: AIR validation failed
  

  Am I missing something? How can I solve this problem?

  Thank you in advance for your help!

  You can just use AIR 2.6 without any problem. It isn't really much of a difference from the point of view API between 2.6 and 2.7.

  If you really want to use 2.7 you need to overlay the AIR SDK 2.7 on your SDK 4.5.1.

  Adobe has an article on how to do this. http://kb2.Adobe.com/CPS/495/cpsid_49532.html