DataGuard failover/switch test notes

Similar Questions

• on/off switch does not work since the SIERRA

  Hello

  Since I'm sierra os that the on/off switch does not show me the dialogue window in which you can choose between power, reset, disconnect you.

  This is a problem of Sierra? There is an option in the system Pref?

  Thank you

  It works very well in the Sierra.  Simply press the button longer.

• Wireless communication switch does not work - Satellite A200 - 23 c

  The laptop has been included, and both a WI - Fi connection stopped working.
  Wireless communication switch does not work. Do not ask is it possible to do?

  Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

  Wireless network card is enabled correctly in Device Manager?

• Tecra S1: Rf Ubuntu wireless switch does not work

  Hi all

  I recently bought an Intel mini-PCI wifi card for my Tecra S1 under Ubuntu. It is detected without any problem, Intel provides even native drivers for Linux. However, the hardware to activate wireless switch does NOT work. According to iwconfig, the radio is off. I use the ipw2200 driver which can detect the hardware and the software rf_kill. I can enable and disable software killing RF, but kill him material stays on.

  I suspect that the radio feature is disabled in the BIOS but I don't have Windows running on the laptop over to change the setting. Is it possible to access BIOS options under linux? Toshutils are not supported by the tecra because she seems to have a Phoenix BIOS.

  I hope you can help!

  Edwin...

  Hello

  Tecra S1 supports BIOS Toshiba you can access BIOS by pressing ESC at the beginning of the startup.
  In any case I think you won't find anything in the BIOS.

  If you are not able to use the switch of material on the side of the laptop then the Wlan card is not compatible or the hardware switch is malfunctioning. I would say that the card is not supported.

  Maybe the insulation of the 13 pin might help please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19843&MessageID=74074
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15228&MessageID=56522

• Satellite L40-18 X - wireless switch does not work

  Hello

  I installed Windows 7 on Satellite L40 - 18 x, PSL48E, the installation seems correct. After installation I noticed that the wireless switch on/off (power) switch does not. The wireless network is working except the functionality of switch.

  It worked on Windows Vista. I installed all the up-to-date drivers for the network card wireless, including atheros, configfree, chipset drivers, but no effect.

  Please can someone tell me the possibole solution?

  concerning

  Salahaddin

  Hello

  I agree with resident.
  The Wlan switch on the side of the laptop has all the drivers and it works independently of the installed software!

  The FN + F8 key combination that allows the WLan should work on if install you value added package.

  You should also check if the WLan card is set on IT in Device Manager-> properties-> Advanced tab WLan card.

  See you soon

• WRTU54G-TM: switch does not connect

  I have a WRTU54G-TM router that allows PCs to connect directly via its LAN ports without problem.  However, whenever I connect to a switch, this switch does not have a good connection.  I tried several different CAT5 cables and two switches.  The two switches work fine when I take the router out of the loop.

  Here's the catch...

  The router is brand new, I thought it was a problem with the last router.  The company that I got helped me to solve this by phone and concluded that the LAN ports are bad.  Apparently, we were both wrong, that the problem persists.

  I tried with RIP enabled for LAN and "Both", but to completely disable RIP.

  Any ideas?

  To answer your question, Yes.  Yet the answer to my original question was in fact much simpler...

  Usually, I'm the only person in my house that affects my home network.  However, when there was a blip in the Internet just before this happened, the mistress of the House decided to help him out he willingly.  Needless to say, it was without direction and without good knowledge of what to do.  His diagnosis consisted of see the end of a CAT5 cable sitting near the switch.  Since you apparently have a House, she hooked up to the switch.  Unfortunately, the other end of the same cable was ALSO connected to the switch.  This creates a Terminal loop for all traffic based on cable, while wireless works fine.

  Leason learned...  Check your cables.

• Main menu of continuous bridge constantly appear on the screen, the main menu switch does not

  Original title: MAIN MENU

  Main menu of bridge keeps flashing constantly on the screen.  How can it be turned off?  The main menu switch does not work.  Thank you.

  I would check the FAQ of the gateway.

• My small business SF 302-08 Switch will not let me apply the command "Routing".

  Hi everyone, my switch cisco small business SF 302-08 has the latest firmware and I want to activate the command routing, but it doesn't let me do that.

  I've read the reference guide for orders, do all this procedure: IP Routing Protocol independent commands starting at page 629, but nothing happens. I need this because I want a routing between VLANs

  Kind regards.

  Hi Felipe

  Look forward to hearing how you go.

  If you reset the factory default switch and the switch is NOT connected to a server, the switch restarts with a default IP 192.168.1.245 address according to the Quick start guide .  If your PC has a static address 192.168.1.2, you should be able to access the graphical interface of the switch.

  http://www.Cisco.com/en/us/docs/switches/LAN/CSBMs/sf30x_sg30x/Quick_Start/78-19252-01.PDF

  If the switch is connected to a DHCP server, the switch Gets an IP via DHCP.

  I've had problems using hyperterminal on my Windows 7 box, that I have overcome by restarting my PC in order to free the COM port.  Settings of the console are;

  • 115200 bits per second
  • 8 data bits
  • no parity
  • 1 stop bit
  • no flow control

  If you really have problems, and you think that the switch is faulty, you have the possibility to use the services of small business Support Center (HWC) in order to identify if the switch is good or bad.

  The URL that watch phone numbers are lower;

  www.Cisco.com/go/SBSC

  Best regards, Dave

• Local unit is active failover but is not active.

  Impossible to run IPSEC sessions... This is a debugging... any idea?

  # Debug ASA5520 cry isa 1

  ASA5520 # 14 August at 11:06:59 [IKEv1]: IKE initiator: local unit is active failover but is not active.

  August 14 at 11:07 [IKEv1]: IKE initiator: local unit is active failover but is not active.

  August 14 at 11:07:02 [IKEv1]: receiver IKE: local unit is active failover but does not

  currently active.

  August 14 at 11:07:04 [IKEv1]: IKE initiator: local unit is active failover but is not active.

  August 14 at 11:07:04 [IKEv1]: IKE initiator: local unit is active failover but is not active.

  Try to restart the PIX.

  Referring URL:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_tech_note09186a0080094ea7.shtml

• Oracle ADF Model Tester (-not signed in)

  In Jdev12.1.2, I created a new Application to run the demo of adf faces (rcf-dvt-demo 12.1.2) test, it works well.

  now, I need to add a new function - one of which is to connect to a database as well as to add business components.

  1. create a connection to the application resource database;

  2. create the table business (hr.departments) component.

  AppModule

  EO departments;

  DepartmentsView

  But when executing ADF Tester against the AppModule above, high errors will may not get the result.

  Oracle ADF Model Tester (-not signed in)

  and he showed empty for AM

  Journal of msg like this:

  August 17, 2014 16:54:12 oracle.adf.share.config.ADFContextMDSConfigHelperImpl createMDSSession

  INFO:

  oracle.adf.share.ADFShareException: error getMDSInstance

  at oracle.adf.share.config.FallbackConfigImpl.getMDSInstance(FallbackConfigImpl.java:83)

  at oracle.adf.share.config.FallbackConfigImpl.getDefaultMDSInstance(FallbackConfigImpl.java:94)

  at oracle.adf.share.config.ADFConfigImpl.getMDSInstance(ADFConfigImpl.java:569)

  I tried to fix it but did not succeed.

  can someone help?

  Thank you.

  This is exactly the problem. You should not add an application module in a project (demo in your case), which has a webroot.

  You must create a new project and add request module in this new project. Then, you use the module of the application as you would normally to the data control.

  Timo

• DataGuard failover data global or normal service?

  Hello

  I'll put up two rac clusters of 2 nodes using linix and Oracle 12.1.0.2 rh6.

  Clus-1 is the primary db dnt5a and clus-2 it is standby dnt5astdby. between them is a DataGuard broker.
  It is an active-passive cluster.

  What I want is an automatic failover from the primary database to standby db - transperant to the client application.

  This will be possible when it is an active cluster / liabilities?

  The Global Data Service will do or is the Fast-Start-switch function in the best DataGuard soluition?

  Kind regards

  Jan

  Global data service is not running transition real role. Once the transition from role was made manually or by using DGBROKER, the SERVICE is redirected to the specific instance. In the previous version, had to use a combination of GRID infrastructure, DATAGUARD BROKER service to perform this operation. Now using GDS should the Service must be defined and GDS to install.

  This is a good doc http://www.oracle.com/technetwork/database/availability/global-data-services-12c-wp-1964780.pdf

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• N40l Microserver does not illuminate. Switch will not do anything.

  Team,

  I have a micro N40L server that I use a home theater media server. It has been sitting in my living room for a few years, quite happy.

  This week, possibly after a power failure, the server couldn't start. I noticed he was sitting there with the power button showing amber in color and the HP logo on the front panel was not lit.

  I tried to hold down the power button but the yellow light remained on and the server did nothing.

  If I removed the power cable there is a click as I plug it back, the light orange light. The only light is the light of network activity that flashes from time to time, as it was still plugged into the network.

  No fans run, no disc no boot, no output to the screen through the graphics card Radeon HDMI. Even the bios page will appear.

  I am assuming that the power supply may have failed. Can what tests I do to find the flaw?

  Would it be a defective switch?

  The operating system running a Windows Server 2008.

  He had two drives, 250 GB system drive and a single drive of 500 GB data. No RAID has been configured.

  The only addition is a Radeon graphics card.

  Any ideas what to try?

  Thank you

  AJ

  You are right, the problem was caused by the power switch blocked.

  After some insistence, it is still blocked, but with the help of the post.

  Improvement of Hugh until I can get it replaced.

  Thanks for your help...

  DM

• Satellite L300 - wireless switch power switch does not work

  I installed XP on my L300 - 110 (PSLB0E), cause I don't like Vista. I installed all the drivers, and everything is quiet OK. But one thing little annoying me - wireless, switch, it does not work. So I can turn on Wi - Fi only by pressing Start-> connections and so on.

  I need help! Who can tell me, what driver or software do I need to install? Thnx a lot!

  Hello

  Do you mean the hardware switch on the side of the fron of the laptop?
  Normally this switch still works because he founded material s and must always be defined on IT if you want to use the WLAN and OFF to disable WLAN.

  Have you tested the switch on OS preinstalled Toshiba? Maybe it's a hardware problem

  Make sure that the latest drivers are installed!

• Can I configure NISE with a switch of party - if the switch is not installed?

  I've never used NOR Switch before Executive - we hope to use it on a new project.

  We do not have equipment at the moment - we will use a Pickering 40-540-021 '132 x 4' switch.

  I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? I get an error when I create the NI Switch Executive virtual device. Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..

  Here's what I've done so far:

  -Install the drivers of Pickering.

  -To the MAX (v5) I have setup a session driver IVI and logical name.

  When I try to create a new NI Switch Executive peripheral virtual, I add the logical name of the switch, click [next] and get the NISE error...

  "An error occurred so they were trying to access the devices PROJECTSWITCH. The primary error: unknown status code (Hex 0xBFFA400C).

  I see that a virtual device is created with no logical switch assigned. I get the error even if I try and add a logical switch manually to the virtual device NISE.

  Is it because the switch Board is not available for the system? Can I configure the routing/groups/exclusions without the device being mounted physically switch?

  Thank you

  Alan

  Alan.

  
  Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..

  This should be the expected behavior. NEITHER Switch Executive tries to communicate with the instrument before allowing you to configure routes to ensure that there is no problem that would affect the operation of the Switch Executive. In your case the pilot trying to communicate with a non-existent device.

  I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? Can I configure the routing/groups/exclusions without the device being mounted physically switch?

  It is possible that all compatible IVI devices should have the ability to simulate.

  It seems that you have configured your session of IVI driver incorrectly for a simulated device. I try and make sure that in the session driver, under the 'Général' tab, select the drop down menu to "Simulate with" and select 'Specific driver' and then click 'Save the IVI Configuration'. This will return the Pickering driver selected in the 'software' tab and simulate a device. This should allow you to create a virtual device NI Switch Executive and develop and test the code on the simulated instruments.

  I would like to know if you have any other questions.