Satellite P750 - after update BIOS CPU fan runs faster

Similar Questions

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye

• Satellite M40X: After update Bios keyboard keys do not work correctly

  I have a Satellite M40X and I had updated the Bios to v 1.60. and now the keys u, m, 7 and the up arrow will not work correctly. The problem is that there is not another version of Bios to use.

  How can I solve my problem?
  Can I get the old version of the bios?

  Thank you
  Gabriel

  Hello

  No won´t you be able to recover the old BIOS. The only two options are:

  1. try to update BIOS and check if it work s
  2. in the case of no success, please visit the [ASP Locator | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and ask them for a checkup of material and repair.

  Welcome them

• HP G32 white screen with all LEDS blink and CPU fan run fast

  Hi all

  I have a laptop HP G32-205TX

  I had a problem that was the device would be loop at startup without showing the start of message or HP logo.

  I changed the Ram memmory and it was fixed.

  Now I'm having a different problem some kind.
  Specifications stopped loop at startup but has all its flashing LED (Caps Lock, Wifi, Lan and the side LED)

  Please, someone help me.

  Thank you

  Hello @Khushal17,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your laptop fan is running faster than normal and that all lights are flashing. I'd love to help you in this case!

  As a fan of hyperactivity is symptomatic of internal overheating, I recommend that you follow the steps described in this document on the reduction of heat inside the PC to avoid overheating. I also suggest to take a look at this resource: computer does not start and the lights blink or computer beeps, to determine the reason behind the blinking light caps lock.

  If the CAPS LOCK flashing indicates a hardware problem, or the fan continues to run at high speed, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Satellite Pro 4270: after update BIOS CPU speed at 250 MHz

  Welcome.

  I have upgraded the BIOS to version 2.7 (downloaded on toshiba website) in Satellite Pro 4270 and after her, my bus speed decrease to 250 MHz, so now I have Celeron 250 MHz instead of 500 MHz. You have some suggestions? Where can I find the old version of the BIOS in v2.7?
  Thank you

  HI Artur,

  Unfortunately, it is not possible to download an older version of BIOS on yout laptop since the BIOS update procedure is written to test later versions pre-installed and not too write.

  You will need to take your laptop to a Service partner certified to have a previous version of the BIOS re-installed.

  Kind regards

• Satellite P500 - after update BIOS on the numeric keypad does not work anymore

  I just had a Satellite P500 and am running Windows 7. I downloaded all the latest drivers and updated the system BIOS to version 1.70 (from Toshiba support website). Now, my numeric keypad of the keyboard does not work.

  The NumLock light is on and when I hit the key "6" on the pavement, he turns the power light, but the behavior of the other keys does not change that it is on or off. The '-' key to enter a '6', but none of the other keys (except "enter" does nothing.

  I removed the keyboard driver and rebooted to reinstall the keyboard driver, but has no effect. The keyboard has worked for a few days after that I flashed the bios but seems to have stopped since I started using a USB mouse. I tried to uninstall the USB mouse driver, but who have nothing do either (it was a Logitech driver).

  Anyone have any ideas? Thanks in advance

  > I did not upgrade bios 1.7
  Maybe you should try upgrading the BIOS
  As another user has suggested upgrading the BIOS 1.7 helped, even if the end user has updated the BIOS twice

• Satellite U400 - after update BIOS lighting lights

  Since the update the BIOS on my U400-15E (Vista 32), lighting of the multimedia keys, touchpad always turn after the restart, recovery from the sleep or Hibernate. Touch the illuminance on the off button once does that second touch them will turn off until the next reboot.

  Illumination is disabled in the configuration of the bios and also through HWsetup. After reboot/wake up, without touching the illumination button, accessing the illumination in HWSetup tab / illumination is shown as turned off even if it's on. Touch the power button can toggle illumination to without changing the real light on keyboard. Next key activates / deactivates them both off.

  This isn't a pain important but very frustrating. Any ideas?

  Hello

  A friend of mine had a similar problem with the buttons of the illumination and the reason was an update of Windows or software that is not compatible.
  Anyway, he did also reinstall the VAP and updated the BIOS but no luck. At the end of the story he reinstalled Windows using recovery disc HARD option and everything worked very well.

  Maybe a new facility with Toshiba Recovery disk or HARD drive recovery option can help you, buddy.

  Good luck!

• Satellite C660D - after update BIOS wireless card no longer works

  Hello
  Yesterday I Tempro message asking me to do an update to the BIOS: 'bios-20120601184846. I did but it was not reinstalled the wireless driver, and since my computer can't find any wi - fi network. I still have a working ethernet connection.

  I tried several ways to fix it and nobody has succeeded:
  -J' installed the driver "slate-driver-s1081-win7-wlan-1005.31.1222.2011".
  -J' installed from the toshiba Web site, the driver "realtek_wlan_win7_2000016L_20110523".
  -J' tried a system restore, but he made a mistake and did not work

  How can - I'm restoring my wi - fi connection?
  Thanks for your help.

  Technical information:
  Model: Satellite C660D - 104 Ref: PSC1YE-00Q001FR serial number: 3B097607K
  Wi - fi card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC #2
  Windows 7 64 bit

  PS: Sorry if I don't speak very well, I'm not English.

  Hello

  This means the card WLAN is not listed in Device Manager?
  Some unknown device is listed in Device Manager?

  To be honest, this issue is not known to me but if it please try to set the BIOS to default settings and check again.
  I put t know if this will help but you can back up all your data and install again recovery image to check if the same problem persists with the factory settings.

• How to restart the Satellite A100 after update BIOS to version 6.00?

  I've updated my BIOS to version 6.00, but when restarting my Toshiba Satllite the BIOS shows me an error:
  "No TPM or TPM has problem.
  The ram test has passed but I can't get into Setup and BIOS freeze after the RAM test
  Do you understand what the problem is and how I can find the solution?

  My model is: PSAA8C-TA402C

  I speak and write better French-language.

  Thank you

  E-mail: [email protected]

  ASP you last chance I understand that s too far from your city, but there is nothing to do. Communicate with the guys and maybe you will have to send the laptop to the ASP.

  Good luck

• Re: Satellite P100 - after update BIOS it does not start optical drive

  I have updated the BIOS to 4.70 in my P100 PSPAAE. After restarting, I expect about 10 minutes, but nothing has happened, after that the screen of the BIOS, the screen went black. I turned off the laptop only.

  I chose the option "start windows normally". Since (I assume) the laptop does not drive. Any, I have to start from there. Everything else works fine.

  It is because of the update of the BIOS, or something else could cause this problem? Any idea or help appreciated!

  Hello

  The optical drive is recognized from the BIOS?
  You can read the disc in Windows?

  Maybe you should load the default settings in the BIOS and try another bootable disk.

• Satellite L300 - after update BIOS BSOD appears

  Hello world

  I have a question about it. I have a Toshiba L300 with Intel GM965 chipset. I've been works very well with this laptop after using the Bios v1.40.

  However, recently, after an upgrade of the Bios to v1.50, I started to get the BSOD (quite often) in Vista that I had in v1.30 bios.

  If you have this problem and find the solution somewhere, please let me know. Much appreciate.

  Moreover, there are some problems with BSOD caused by the chipset GM965 reviewed on the site Internet of Dell and Intel. Most people say it's because the Vbios (video bios). The fact that after upgrading my bios to 1.50, the Vbios from my toshiba is always (most recent intel is 1572) 1436.

  If you have a newer version of the vbios, please let me know when you bought your laptop. Much appreciate.

  Here is an exchange of views on Intel and Dell website:
  http://software.Intel.com/en-us/forums/user-community-for-Intel-graphics-technology/topic/59127
  http://software.Intel.com/en-us/forums/user-community-for-Intel-graphics-technology/topic/61093/

  Moreover, for those who cannot upgrade the driver Intel site, please uninstall the previous driver and install the new driver of the installation file (or do it manually). Contact me for more details if you need.

  I'm looking forward to having good and clear on your part answers. I don't like the answers- and made-up. (I'm not a fool).

  Thank you

  Hello

  I'm still looking for answers about Vbios. Hope can hear someone here.

  In the meantime, I would like to use this thread to discuss chipset GM965 and question, you can meet with her. Obviously, the driver supported by Toshiba is an older version and is missing many features. Some people say it is not safe to use other pilots, but it is false. There is nothing wrong if you use the original equipment manufacturers, as they know more of 3 companies.

  Intel has released a new chipset GM965 - X 3100 driver to:

  Download: http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2800
  Covering memo: http://downloadmirror.intel.com/17122/eng/relnotes_winvista64_gfx.htm

  with many correction of bugs (including for the extended monitors).

  To get the best performance new driver. You must uninstall the current driver on your machine manually from the Device Manager. You can then run the whole upward.

  Don't forget to add a light T & L SW for some software to improve their performance. (Look for how to improve x 3100 perforamce on this site support or the answer that and I'll show you how). For x 3100, SW mode will allow you to have some executives rate more and you can play your games as well as make your graphic works.

  Kind regards.

  Post edited by: anhchuong

• Satellite 5205 - after updating Bios - repairman / message call Bios

  Toshiba 5205 - repairman / call Bios - need help.

  I flashed my bio and the laptop locked in windows and not extinguished after the flash.

  Now when I turn on the laptop, I have no picture and the front of the laptop has a LCD remote that says: technician / call the BIOS.

  I already disassembled the laptop battery and let sit a day full to the bios killthe, but I get the same error and still no picture.

  How can I fix? The bio should be dead by now. Am just using CA power supply for power. I tried to connect the battery in and I also put battery back in. bio and I get the samething on the remote lcd display error message.

  There must be a way to work around this problem, if anyone knows please let me know.

  Hi Jim,.

  Unfortunately the battery will not reset your BIOS. The BIOS is maintained by a battery on your motherboard (CMOS or RTC battery) and you will need to disassemble your laptop to access the battery. Even remove the battery CMOS does not restore your BIOS, since it will be held in a non-volatile CMOS chip area.

  You will need to take your laptop to an authorized Toshiba Service Agent to be reflashed with a new BIOS chip.

  Kind regards

• Satellite L - after update BIOS no longer start

  I just got an email saying that there was an update of the BIOS for my laptop. He began to install but my computer turned off and will not start back up
  Help, please!

  The update was: ACPI Flash BIOS version 1.90 for Sam/Sat Pro L355D/L305D (PSLE0U, PSLC0/1U)

  Nice to know, but the situation is clear.
  Something went wrong during the process of updating the BIOS and module ROM was not properly flashed.

  Only the ASP can help you mate
  So, don t waste time and get in touch with your country guys!

  See you soon

• Satellite C55 - Has - after update BIOS fan turns faster

  Hello

  I have been informed by Toshiba application this new version of the BIOS is available, I confirmed BIOS and it has been updated. Now I have the problem. Cooling fan runs faster than before and it is very annoying.
  Find old versions of BIOS somewhere and roll back? I didn't need it if it does not work properly.

  Now I have version 1.40. Y at - it a solution for this new version?

  Message was edited: assignment has been translated

  Driver Toshiba UE page provides only the latest version of the BIOS.
  In addition, the BIOS downgrade isn't possible using the update to the BIOS of win-bases.
  To downgrade the BIOS Toshiba unit, you will need to use the traditional method of updating the BIOS that requires a special version of BIOS. It is available only for the authorized service provider.

  On the other hand, it must be a good reason, why the cooling module run faster.
  Perhaps that the cooling method has been improved again BIOS just to make sure that the internal parts would be properly cooled.

  It s just a guess but I think it makes sense

  By the way: after each update of the BIOS, you must load the BIOS default settings and should save the changes. If you haven t done this in the past, it doesn't

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!