datasocket lack events

Similar Questions

• Lack of dynamic event (declaring)

  In my application, I have one notifying registered as an event 'user '. There are three structures of the event, each in a while loop; in every structure of the event, the event Notifier is recorded as "dynamic event. In both structures, the delay is set to '-1' (infinite). In the third stcructure, the time is set to 5 ms; the case of timeout takes 500ms to complete (for example, by using 'Wait ms'). A structure of additional event triggers this event notifier.

  What is happening is that the two structures with infinite time-out catch this event (I think), but lack the structure with a short timeout and expiration time of long-running cases. If I do the waiting time is long and the case timeout run quickly, this structure has also intercepts the event. It seems that when executing the timeout case, the event is canceled.

  An example VI is attached.

  Is this a bug or I do something wrong?

  Thank you

  Sergey Liberman

  You're doing it wrong.  You create entries in separate events for each loop.  You're really lucky that the two loops are both able to see the event and run.  Once a loop handles an event, it get cleared out of the queue of the event.  The two structures meet at the same time, but once that one or the other ends, he is allowed out of the queue and the 3rd structure ever sees.

  This has come up before.  This recent thread discussed.

• ATTENTION: lack of events in the event log

  I am slot as Vista Home Premium 64-bit. I have never received this warning before in a reliability and a report on the return, but three times today I received a warning that lack of events in the log. The percentage varies with each data collection. As you know that surely, he asserts that a possibility is ETW buffers and buffer size may be too small but it has never had this problem before. I ran a chkdsk and has not helped. I checked services and turned everything on automatic to make sure that all services are in the State of the device of the necessary Log data collection.

  What I do or is - nothing.

  Hello

  You can follow the links below and check if they are a help.

  http://msdn.Microsoft.com/en-us/library/ff190866.aspx

  http://social.msdn.Microsoft.com/forums/en/ETW/thread/a1aa1350-41A0-4490-9ae3-9b4520aeb9d4

  If this does not help, you can post your request in the MSDN forums for assistance.

  http://social.msdn.Microsoft.com/forums/en/ETW/threads

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I capture a change in value to a datasocket in a structure of the event?

  Hello

  I am currently working on a project with two separate systems (PXI embedded control and a standard PC) who speak over a network using a datasocket. The PXI controller is reading data of a DIO card and this announcement to the datasocket.

  I really wish I could check the datasocket (on the PC) for a change in value and only react when a change occurs?

  Does anyone have an idea how this could be done?

  Please ask questions if I did not explain it very well

  Thank you

  James

  Hello Jam.Hall,

  I found this thread, I hope this might help.

  He referred to the knowledge base article if you need more details.

  I hope this helps!

• Event ID 1542, the Service user profile and lack of Classes Root Key

  Hello

  OS: Windows Vista Home Premium SP1 32-bit

  Symptoms:
  Assosications not continued resets (among others)

  Details:
  HKEY_USERS\HKEY_USERS\MySID_Classes is missing on reboot
   
  Event Viewer says:

  Event ID 1542, the user profile Service
  Windows cannot load a file of the registry classes.
  DETAIL - the system cannot find the specified file.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\hivelist is not an entry for
  \REGISTRY\USER\MySID_Classes UsrClass.dat file

  Open the registry and manually load the UsrClass.dat under the HKEY_USERS hive works :)

  It's a bit like the same as http://www.dabcc.com/article.aspx?id=9762 (excluding the prospects of course)

  Think that I have not tested: restore mode (cause it is disabled)

  Thanks in advance,

  PS Could you please move to the correct thread?

  Hello Billygr,
   
  Thanks for the reply.  To this point I would submit a form at: http://msdn.microsoft.com/en-us/aa497440.aspx.  This will be reviewed by the Microsoft Developer Network team.  Please keep me for resolution or if the problem is resolved.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Request for lack of events/heart beat

  Hi all
  
  I'm trying to monitor network packets I send to a specific ip address and also check if I sent packages for that IP special at regular intervals (something like a heartbeat). I transfer the wireshark network output to a csv file and reading in PART with csv adapter.
  
  In order to check for missing events/heart beat (this is used to check if a server responds to the ping at all hours), I followed this link
  Re: CEP non-event programmer and
  [http://docs.oracle.com/cd/E21764_01/doc.1111/e14476/examples.htm]
  I configured the PART. This is the query that I'm shooting
  
  SELECT Packets.ipdst AS ipdst, Packets.ipsrc AS ipsrc, Packets.framelen AS framelen, 'Error-Missing event' AS alertType
  of FilterNetworkPackets
  () MATCH_RECOGNIZE
  PARTITION BY ipdst
  MEASURES Ipdst_Packets.ipdst AS ipdst,
  Ipdst_Packets.ipsrc AS ipsrc,
  Ipdst_Packets.framelen AS framelen
  ALL MATCHES
  include timer events
  MODEL (Ipdst_Packets *)
  DURATION 10 DEFINE Ipdst_Packets AS ipdst = "xx.xx.xx.xx")
  As packages
  
  I have configured heartbeat (10000) on both inlet channel.
  
  I get output in which some packages are repeated. I don't know how to obtain a missing event notification once the elapsed time, please help me.
  Thanks in advance
  Shilpa

  Hello

  The output you get is infact the notification you receive when there is no event with 173.194.5.140 for 10 seconds.

  for example, the first exit.
  OutputBean:onEvent() eventType = RequiredMailFields object plus RequiredMailFields ki
  ND = null time = 696477423597 ipsrc is 192.168.0.10, ipdst = 173.194.5.140.
  elt_time = 686477423597, framelen = 5, alertType = error-Missing event isTotalOrderGuarantee = false

  Elt_time here's the moment where the event happened and time is the time associated with the output. If you subtract elt_time of time, you will notice that, for each of the output, the difference is 10 * 10 ^ 9 nanos = 10 seconds. So the output above should be interpreted as "no case with ipdst = 173.194.5.140 arrived 10 seconds after the event with framelen = 5' and therefore the notification is generated.

  You don't see any output event that has framelen = 3, because after the framelen = 3 entrance arrived, the following entry (with framelen = 5) for this partition arrived before the 10 seconds duration expired.

  According to your requirement, it seems that you need some sort of indication in both cases:
  (1) whenever an event happens with this ip address - will mark the beginning of the green line
  (2) when any does happen for 10 seconds to this ip address after receiving an event for this ip address - will mark the beginning of the red line

  I think you can model this as follows:

  review from normalEvents:

  Select ipdst as ipdst, ipsrc as ipsrc, framelen as framelen, 'The Normal event' as alertType, ELEMENT_TIME as elt_time from FilterNetworkPackets

  Discover the missedEvents: (the existing query - added ALL clause MATCHES MULTIPLE so that you get one out every 10 seconds until the next event happens for this partition)

  SELECT Packets.ipdst AS ipdst, Packets.ipsrc AS ipsrc, Packets.framelen AS framelen, 'Error-Missing event' AS alertType, Packets.elt_time AS elt_time
  of FilterNetworkPackets
  MATCH_RECOGNIZE
  (
  PARTITION BY ipdst
  MEASURES
  Ipdst_Packets.ipdst AS ipdst,
  Ipdst_Packets.ipsrc AS ipsrc,
  Ipdst_Packets.framelen AS framelen,
  Ipdst_Packets.ELEMENT_TIME AS elt_time
  ALL MATCHES
  include timer events
  MODEL (Ipdst_Packets) DURATION MULTIPLES OF 10
  DEFINE Ipdst_Packets AS ipdst = "173.194.5.140") AS packages

  AllEvents query:
  Select * from (normalEvents union missedEvents)

  On the release of the 'allEvents' query, based on the "alertType" of the event, you can trigger appropriate treatment in the bean output.

  Concerning

  Published by: Mary on March 30, 2012 12:26

• Lack of base class for events (flash.events). Flex SDK 4.1 | Flex Builder 3

  Hello

  I'm experience the following problem, I can't locate or find the base class for events when I do "import flash.events;"-AutoComplete does not work as well. import flash. available only - flash.errors and flash.text

  However if I spend the Flex SDK 4.1 to 3.2 the Flex SDK kit so no problem and I can add flash.events

  SDK Flex 4.1 version is 4.1.0. 65265, I also tried Flex 4.0 SDK, the same problem, not able to find events.

  Requires the flash player version I tried both: 10.0.0 and 10.1.0 does not.

  Could you please suggest what might be wrong. Unfortunately not be able to find this info in the forum or google

  Thank you

  Kind regards

  Marakame

  Have you tried

  import flash.events. *;

  Or

  import flash.events.Event;

• Lack of basic understanding of the events

  I'm new to Flex, but I do 95% of what I need a prototype of data streaming using BlazeDS.

  I would really appreciate some insight on the last 5%: events (shipping and listening)

  I have a datagrid that is filled with a set of data - made car (Chrysler, Ford, GM).

  I have an another datagrid filled with models of cars (300 c, Mustang, Camaro).  This dataset is pushed the blaze as an IMessage event.

  When the Flex application makes the car done datagrid, text is not enabled.

  What I'm trying to accomplish is the following: once I get a message in the stream of car models that he has done to do this, I want to activate the text of this brand.

  Here is my real datagrid:

  < mx:DataGrid id = "dgMake" x = "25" y = "180" width = "109" height = "397" dataProvider = "{initML}" textAlign = "center" >
  < mx:columns >
  < mx:DataGridColumn headerText = "Makes" >
  < mx:itemRenderer >
  < mx:Component >
  < mx:Text textAlign = "left" width = "90%" text = "{data superviser}" enabled = "false" / > "
  < / mx:Component >
  < / mx:itemRenderer >
  < / mx:DataGridColumn >
  < / mx:columns >
  < / mx:DataGrid >

  If someone could guide me through the basics of setting up of an auditor, I would be very grateful.

  -Chad

  I don't know how you do it, but you must ensure that you set myVar outside all functions, so it is global. You also, be it public, especially if it is accessed from within the converters element, and in this case you may have to outerDocument.myVar.

• How can I return to my photos from the event? Have lack symbol of photos in Lightroom.

  LR experiments for a few weeks. Am now unable to access tools on the right side of the page development. Histogram shows 'photo is missing' and when I open the tools, they are grey. I have a corrupted file? Can't open the export in the file section of LR too.

  The USB needs to be connected when you are working with your photos. You can safely disconnect and reconnect later if you wish.

  You can also create smart previews so the USB does not need to be connected when change you (but it would still need to be connected for export, printing, creation of book).

• IPhoto crashed and remove partial events

  I'm sorry, there was a similar thread, and I accidentally it marked as closed. He came from nowhere and I includes a summary and a link at the bottom.

  I launched iphoto 9.5.1 on 10.9.5 and have no good backup.  (Please do not pass judgment, I know I should have upgraded and saved...). Is it possible for me to return my events, changes, titles and other metadata?

  2 days ago iphoto crashed and would not restart. When you hold option + command while from iphoto did not (much less quick to rebuild) library, I installed iPhoto Library Manager who found the library without even an error message but only a fraction of the pictures (about 1500 to 6000). Photos seem to lack of each event, the films have been truncated. The most recent event was absent.

  I checked in the file system, Library.photolibrary/Masters/2014/05/10/ Pictures/iPhoto... the pictures were there and seem to be grouped reasonably, probably by import. A recovery of Library Manager iPhoto later with pictures of recovery orphan to return a batch of photos, I guess that all that were in events over what was in the trash. (Even after the removal of duplicates, I more than before.) They are in folders of every day now, I almost 500 instead of 90 and lost titles and most of the changes.

  The thread iphoto 9.5.1 orphans most of my photos

  • The damaged library is located on the system drive, in ~/Pictures named Library.photolibrary iPhoto and shows in the finder with the icon of the fan (see below)
  • Control option double click the damaged library translates iPhoto trying to repair the reconstructed library and then try to import the library damaged in that rebuilt
  • The rebuilt library does not contain a folder of "old masters", at least not after a savaged the orphan photos.
  • I did not perform an upgrade on the damaged library or iPhoto update recently
  • It crashed during the execution of the faces.
  • drwxr-xr-x @ 17 personal myuserid 578 4 Feb 01:11 iPhoto Library.photolibrary

    

  • 

    

  The simplest solution is to restore the backup copy of your library that was made just before this happen.

  If not try this:

  With the help of iPhoto Library Manager to rebuild your iPhoto library

  1 - Download iPhoto Library Manager and launch. > click on the button Add library.

  

  2 - Select the library you want to add those in the selection window.

  3 - Make sure that the window box "photos orphan Scavange" is checked in the reconstruction.

  

  4. now that the library is listed in the left pane of PILM, click your library and go to the Library ➙ rebuild library menu option

  

  5. in the next window name the new library, and then select the location you want to be placed. Click on the button create.

  , Note 1: This creates a library based on the LIbraryData.xml file in the library and will retrieve the events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.

  
  

  Note 2: Your current library will be left intact for subsequent difficulty attempts if you wish.

  

• corrupt datasocket instalation?

  
  

  Hello

  There is some information that may help to understand this problem.  Right-click on "My computer" and select manage. Go to event viewer > Application log and search for MSIErrors.  The error that is most useful is one that has a GUID and a file path.  Can you post the test of these newspapers?

  What is happening is THAT MSI is not finding a file or registry key that has been defined as a key element of the DataSocket.  Then it goes and find the first thing that has this file in there to try to fix it, which just happens to be the of LabVIEW Runtime Engine.  In addition, ICB is not in the LabVIEW RTE, is the finder example Application CVI uses is written in LabVIEW that n requires RTÉ.

  Jeff
  NEITHER

• Events in the panels under empty

  I have a user interface concept I am looking at.  The final application is to monitor the status of certain parameters in the bays of material.  Given the lack of space on the screen, and since there are so many media, I thought it could work for the customer be able to click on an item in a vacuum in a table of subgroups in the UI and asked for the name of the grid which should have its displayed information it.  When the selection is made, the façade of miniature that VI would remain in the subgroup of experts.  My experience, however, shows that it doesn't seem to be all events on subgroups.  Is it possible to do otherwise than by using the coordinates of the mouse, click in the case of the component?

  You can save events to a table of sub-panels and take actions based on the reference of ctrl.

  

• Why ApplicationMgr.ExecutionClosed event returns incorrect object

  Work with the operator of Labview interface.

  I'm trying to get the event during the sequence file is closed.

  I created two reminders to the ApplicationMgr.ExecutionClosed and ApplicationMgr.SequenceFileClosing events.

  According to aid TS first callback returns execution and second reminder returns SequenceFiile.

  Two reminders are created automatically Labview and have only the argument of the API to pass to the event handler.

  The two event handlers in Labview, I use the nodes property to get the IDS of the objects (execution and file)...

  The two nodes of property give errors #1 with reason: property node has wrong argument 1 (reference object as I undertand).

  When I use varianr conversion I discovered non-empty reference in the event parameter.

  It's very like as return value EntryPoint.Run method for execution and OpenSequenceFile for ApplicationMgr.

  What can be wrong?

  Something happened to the memory or this behavior is the result of my bad actions?

  Hello, Taylor

  Thanks for the reply.

  Today, I have solved this problem.

  The reason was lack of understanding event management in Labview.

  I have passed reference sequence VI of the LV event handler callback file and then tried to recover file ID loop event LV and close the reference.

  In this way was wrong

  File reference here is bad.

  After that I changed to get the ID of file directly in the VI recall I have normal work.

• Save Active Boolean events and exhibit in a list

  Hello, I'm doing my professional service in a power station combined cycle, I am currently working on a system of monitoring and control of some wells that provide water in the reservoirs for the steam cycle. Most of the program is done, but I work separately (to add it later) on the recording of the events. What I want, is for example being able to register each of these pumps are turned off or turned on, or when I have one of the alerts that I already programmed (Boolean) and print with the date and time in the front panel. For example, something like that is what I want to do:

  

  I tried the fact with some tables and could if register at each pump is turned on, but I was not able to combine them into a single table. I don't know if the approach I've tried is good. Any suggestions or corrections?

  You no longer use the result of the 'different' comparison which is used to see if the Boolean value has changed or not. Rather than build an array of controls, bult, an array of the result of the two comparisons 'different '.

  You also lack open session if the two buttons at the same time change (there is a theoretical possibility for cases 3! ), so that you can rearrange things a bit more.

  (... and please do not save the VI with the Panel maximized on screen!)

• Error in event.vi detect Break

  Hey friend,

  As see you an example, I just opened can detect break event.vi.

  The error is 'Wite-conflict of class '.

  Please help me on this.

  I have a program that uses thisVI.that program shows warning

  "This VI needs of a driver or a toolkit component that is not found. Lack of resource file "visarc". »

  Please help me on this.

  

  LabVIEW repaired