Date and at the request of the Date

Similar Questions

• How to display data on the screen and save the data in a file at the same time?

  The code can display acceleration on the screen of the playbook.

  But, when fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ") runs, debug displays no source available.

  ??

  Does anyone know how to solve the problem, which writes data to a file?

  The code is below.

  /*
  * Copyright (c) 2011 Research In Motion Limited.
  *
  Licensed under the Apache License, Version 2.0 (the "license");
  * You may not use this file except in compliance with the license.
  * You can get a copy of the license at
  *
  www.Apache.org/licenses/license-2.0
  *
  * Unless required by the applicable law or agreement written, software
  * distributed under the license is distributed on an "AS IS" BASIS.
  * WITHOUT WARRANTIES OR CONDITIONS of ANY KIND, express or implied.
  * See the license for the specific language governing permissions and
  * limitations under the license.
  */

  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include

  /**
  The milliseconds between the accelerometer readings. It's the same thing
  * rate in which the accelerometer data will be updated
  * material. The update of material rate is below to help
  * accelerometer_set_update_frequency (FREQ_40_HZ).
  */
  public static const int ACCELEROMETER_MAX_POLL_INTERVAL = 25;

  public static screen_context_t screen_ctx;
  public static screen_window_t screen_win;
  dialog_instance_t main_dialog = 0;

  paused int = 0;

  The forces of the accelerometer
  float force_x, force_y, force_z;

  file elements
  int _logcounter = 0;
  FullName Char [256];
  FILE * f;

  /**
  * Use the PID to set the id of Group window.
  */
  public static char
  get_window_group_id()
  {
  public static char s_window_group_id [16] = "";
  If (s_window_group_id [0] == '\0') {}
  snprintf (s_window_group_id, sizeof (s_window_group_id), "%d", getpid());
  }
  Return s_window_group_id;
  }

  /**
  * Set up a basic screen, so that the browser will be
  * Send window state events when the State of the window changes.
  *
  * @return @c EXIT_SUCCESS or EXIT_FAILURE @c
  */
  public static int
  setup_screen()
  {
  If (screen_create_context (& screen_ctx, SCREEN_APPLICATION_CONTEXT)! = 0) {}
  Return EXIT_FAILURE;
  }
  If (screen_create_window (& screen_win, screen_ctx)! = 0) {}
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }
  use of int = SCREEN_USAGE_NATIVE;
  If (screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_USAGE, & use)! = 0) goto fail;
  If (screen_create_window_buffers (screen_win, 1)! = 0) goto fail;
  If (screen_create_window_group (screen_win, get_window_group_id())! = 0) goto fail;
  buff screen_buffer_t;
  If (screen_get_window_property_pv (screen_win, SCREEN_PROPERTY_RENDER_BUFFERS, (void *) & buff)! = 0) goto fail;
  buffer_size int [2];
  If (screen_get_buffer_property_iv (buff, SCREEN_PROPERTY_BUFFER_SIZE, buffer_size)! = 0) goto fail;
  int attributes [1] = {SCREEN_BLIT_END};
  If (screen_fill (screen_ctx, chamois, attributes)! = 0) goto fail;
  int dirty_rects [4] = {0, 0, buffer_size [0], buffer_size [1]};
  If (screen_post_window (screen_win, buff, 1, (const int *) dirty_rects, 0)! = 0) goto fail;
  Return EXIT_SUCCESS;
  in case of failure:
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }

  /**
  * Rotates the screen at the specified angle.
  *
  @param angle angle to rotate the screen.  Must be 0, 90, 180 or 270.
  *
  * @return @c EXIT_SUCCESS on success, to another @c EXIT_FAILURE
  */
  public static int
  rotate_screen (int angle)
  {
  If ((angle! = 0) & (angle! = 90) & (angle! = 180) & (angle! = 270)) {}
  fprintf (stderr, "Invalid Angle\n");
  Return EXIT_FAILURE;
  }
  int rc;
  int rotation;
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, & rotation);
  If (rc! = 0) {}
  fprintf (stderr, "error getting the window of the screen rotation: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int size [2];
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error getting size memory buffer window screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int temp;
  switch (angle - rotation) {}
  case - 270:
  case - 90:
  decision 90:
  case 270:
  Temp = size [0];
  size [0] = size [1];
  size [1] = temp;
  break;
  by default:
  break;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, &angle);)
  If (rc! = 0) {}
  fprintf (stderr, "screen rotation window for parameter error: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SOURCE_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window buffer size of the screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  Return EXIT_SUCCESS;
  }

  /**
  To manage an event of navigator.
  *
  * @return @c the value true if the application should shut down, another fake.
  */
  public static bool
  handle_navigator_event(bps_event_t *Event)
  {
  bool should_exit = false;
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_EXIT:
  should_exit = true;
  break;
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true);
  break;
  case NAVIGATOR_ORIENTATION:
  {
  int angle = navigator_event_get_orientation_angle (event);
  If (rotate_screen (angle) == EXIT_FAILURE) {}
  should_exit = true;
  }
  navigator_done_orientation (Event);
  break;
  }
  }
  Return should_exit;
  }
  /**
  * Display an alert dialog box that contains the location data.
  */
  public static void
  show_main_dialog()
  {
  If {(main_dialog)
  return;
  }
  dialog_create_alert(&main_dialog);
  dialog_set_alert_message_text (main_dialog, "Acceleration to first fix");
  dialog_set_size (main_dialog, DIALOG_SIZE_FULL);
  dialog_set_group_id (main_dialog, get_window_group_id());
  dialog_set_cancel_required (main_dialog, true);
  dialog_show (main_dialog);
  }

  /**
  * Displays geolocation data in the main dialog box.
  */
  public static void
  display_acceleration_data (float force_x, float force_y, float force_z) {}
  char buf [1024];
  snprintf (buf, sizeof buf,
  "\tX: m\n % 7.3.f.
  "\tY: m\n % 7.3.f.
  "\tZ: m\n % 7.3.f."
  force_x, force_y, force_z);
  dialog_set_alert_message_text (main_dialog, buf);
  dialog_update (main_dialog);
  }

  void createafile() {}
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  {if(f==null)}
  file does not exist
  f = fopen (fullname, "r");
  {while(f!=null)}
  file exists
  fclose (f);
  ++ _logcounter;
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  f = fopen (fullname, "r");
  }
  }
  }

  write data to the file
  void writedataintofile() {}
  f = fopen (fullname, "w");
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  fclose (f);
  }

  /**
  * A sample application shows the native APIs of BlackBerry for accelerometer.
  * The example initializes and reads the accelerometer periodically until one
  * NAVIGATOR_EXIT event is received.
  Enforcement also tuned to changes status window in the browser so that
  * It can stop reading the accelerometer when the application is no longer visible.
  */
  int main (int argc, char * argv {})
  bool exit_application = false;
  /*
  * Until we can listen for events from the BlackBerry Tablet OS platform
  * services, we need to initialize the BPS infrastructure
  */
  bps_initialize();
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event). This allows to
  * us to clean up resources in the application.
  */
  navigator_request_events (0);
  dialog_request_events (0);
  /*
  * Initialize the screen so that the Windows Id is correctly set, to allow
  * dialogs to display.
  */
  If (setup_screen()! = EXIT_SUCCESS) {}
  fprintf (stderr, "Failed to initialize the screen.");
  Exit (-1);
  }
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  *
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event).
  *
  * We ask events of dialogue so that we can be notified when the service of dialogue
  * answers to our queries/requests.
  */
  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "error asking navigator events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  If (BPS_SUCCESS! = dialog_request_events (0)) {}
  fprintf (stderr, "error asking dialog events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  /*
  * Create and display the dialog box that displays the data from the accelerometer.
  */
  show_main_dialog();
  /*
  Prior to initialize the accelerometer function, we must ensure the unit
  * takes in charge
  */
  If (sensor_is_supported (SENSOR_TYPE_ACCELEROMETER)) {}
  /*
  * If the device does not support the accelerometer so warn the user,.
  * clean in and out
  */
  public static const int SENSOR_RATE = 40;
  sensor_set_rate (SENSOR_TYPE_ACCELEROMETER, SENSOR_RATE);
  sensor_request_events (SENSOR_TYPE_ACCELEROMETER);

  }
  /*
  * Initialize the accelerometer setting the rate at which the
  * accelerometer values will be updated material
  */
  accelerometer_set_update_frequency (FREQ_40_HZ);

  /*
  Treat browser events and take the accelerometer readings periodically
  * until we receive a NAVIGATOR_EXIT event.
  */
  createafile();
  f = fopen (fullname, "w");

  While (! exit_application) {}
  /*
  * By setting the timeout to bps_get_event to ACCELEROMETER_MAX_POLL_INTERVAL,
  * We assign the maximum duration (in millis) who will wait before
  * release so that we can take a reading of the accelerometer.
  */
  bps_event_t * event = NULL;
  bps_get_event (& event, ACCELEROMETER_MAX_POLL_INTERVAL);

  If {(event)
  If (bps_event_get_domain (event) is {sensor_get_domain()})
  /*
  * We woke up. See if we are in the paused state. If not,
  take a reading of the accelerometer
  */
  If (! pause) {}
  sensor_event_get_xyz (event, & force_x, & force_y, & force_z);
  display_acceleration_data (force_x, force_y, force_z);
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  } //paused
  }
  / * If this is an event of the dialog box, determine the response code and handle
  * the event accordingly.
  */
  {ElseIf (bps_event_get_domain (event) == dialog_get_domain() {)}
  ;
  }
  /*
  * If it's a NAVIGATOR_EXIT event and then set the exit_application
  * indicator so that the application stops processing events, clean and
  * output.
  */
  {ElseIf (bps_event_get_domain (event) == navigator_get_domain() {)}
  exit_application = handle_navigator_event (event);
  }
  } //if event
  } //while
  /*
  * Destroy the dialog box, if it exists.
  */
  If {(main_dialog)
  dialog_destroy (main_dialog);
  }

  fclose (f);

  /*
  * Clean the infrastructure bps and output
  */
  sensor_stop_events (SENSOR_TYPE_ACCELEROMETER);
  bps_shutdown();
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  return 0;
  } //main

  Hello

  As I said on your other thread:

  In order to write in the shared directory/documents, your application should request action "access_shared" and it must be granted by the user. Make sure you have

  access_shared

  in your bar - descriptor.xml.

  Also note that the shared documents folder may not be the best place to write the application log data. There is one connects / in the sandbox to this effect, or the application directory data / directory if the information should be persisted. The documents/shared/folder is designed for documents that the user creates or interacts with.

  HTH,

  Christian

• Compare and get the data in the tables (see post for details)

  I have two tables TableA and TableB. I struggle to write a query to get the dates of TableB (instead of TableA dates) where TableA dates don't coincide with the tableB (beginning and end).

  Example 1: For account A1234,.

  TableA got 2 rows 1/31/2014-3/3/2014 (which corresponds to TableB row), but TableA got another rank 31/01/2014 - 31/01/2014 that corresponds with the date of TableB Begin. In this case, I'm looking for output as below,

  Use TableB start and end date and combine number two rows from TableA for this account

  ACCOUNT	TableB_BEGIN	TableB_END	AMOUNT
  A1234	31/01/2014	03/03/2014	100.0000000000

  Example 2: For the B7777 account.

  TableA end date aligns with the end dates of TableB for this account, in this case I want out put as,.

  Use TableB start and end date and get the amount of TableA

  ACCOUNT	TableB_BEGIN	TableB_END	AMOUNT
  B7777	05/04/2013	06/05/2013	200.0000000000

  Example 3: On behalf of D5555,.

  Even a TableA line corresponds with TableA, there are two other rows in TableA matching start date with TableA and correspondence with the end date with TableA, in this case, that I put as,.

  Use TableB start and end date and combine number three rows from TableA for this account.

  ACCOUNT	TableB_BEGIN	TableB_END	AMOUNT
  D5555	08/08/2014	10/09/2014	1100.0000000000

  Example 4: To account E6666.

  Table corresponds to a row with TableB and no additional lines in TableA, just display the data in A table

  Tables and data:

  create table TableA
  (
    Account varchar2(10) not null,
    Begin   date not null,
    End     date not null,
    Amount  number(19,10) not null
  )
  ;
  
  
  create table TableB
  (
    Account varchar2(10) not null,
    Begin   date not null,
    End     date not null,
    Amount  number(19,10) not null
  )
  ;
  
  
  TableA Data:
  
  
  insert into tablea (ACCOUNT, BEGIN, END, AMOUNT)
  values ('A1234', to_date('31-01-2014', 'dd-mm-yyyy'), to_date('31-01-2014', 'dd-mm-yyyy'), 0.0000000000);
  
  
  insert into tablea (ACCOUNT, BEGIN, END, AMOUNT)
  values ('A1234', to_date('31-01-2014', 'dd-mm-yyyy'), to_date('03-03-2014', 'dd-mm-yyyy'), 100.0000000000);
  
  
  insert into tablea (ACCOUNT, BEGIN, END, AMOUNT)
  values ('B7777', to_date('18-04-2013', 'dd-mm-yyyy'), to_date('06-05-2013', 'dd-mm-yyyy'), 120.0000000000);
  
  
  insert into tablea (ACCOUNT, BEGIN, END, AMOUNT)
  values ('C6666', to_date('25-06-2014', 'dd-mm-yyyy'), to_date('08-07-2014', 'dd-mm-yyyy'), 10.0000000000);
  
  
  insert into tablea (ACCOUNT, BEGIN, END, AMOUNT)
  values ('D5555', to_date('08-08-2014', 'dd-mm-yyyy'), to_date('16-08-2014', 'dd-mm-yyyy'), 1000.0000000000);
  
  
  insert into tablea (ACCOUNT, BEGIN, END, AMOUNT)
  values ('D5555', to_date('08-08-2014', 'dd-mm-yyyy'), to_date('10-09-2014', 'dd-mm-yyyy'), 0.0000000000);
  
  
  insert into tablea (ACCOUNT, BEGIN, END, AMOUNT)
  values ('D5555', to_date('16-08-2014', 'dd-mm-yyyy'), to_date('10-09-2014', 'dd-mm-yyyy'), 100.0000000000);
  
  
  insert into tablea (ACCOUNT, BEGIN, END, AMOUNT)
  values ('E6666', to_date('01-01-2014', 'dd-mm-yyyy'), to_date('01-02-2014', 'dd-mm-yyyy'), 100.0000000000);
  
  
  TableB Data:
  
  
  insert into tableb (ACCOUNT, BEGIN, END, AMOUNT)
  values ('A1234', to_date('31-01-2014', 'dd-mm-yyyy'), to_date('03-03-2014', 'dd-mm-yyyy'), 100.0000000000);
  
  
  insert into tableb (ACCOUNT, BEGIN, END, AMOUNT)
  values ('B7777', to_date('05-04-2013', 'dd-mm-yyyy'), to_date('06-05-2013', 'dd-mm-yyyy'), 200.0000000000);
  
  
  insert into tableb (ACCOUNT, BEGIN, END, AMOUNT)
  values ('C6666', to_date('06-06-2014', 'dd-mm-yyyy'), to_date('08-07-2014', 'dd-mm-yyyy'), 10.0000000000);
  
  
  insert into tableb (ACCOUNT, BEGIN, END, AMOUNT)
  values ('D5555', to_date('08-08-2014', 'dd-mm-yyyy'), to_date('10-09-2014', 'dd-mm-yyyy'), 1100.0000000000);
  
  
  insert into tableb (ACCOUNT, BEGIN, END, AMOUNT)
  values ('E6666', to_date('01-01-2014', 'dd-mm-yyyy'), to_date('01-02-2014', 'dd-mm-yyyy'), 100.0000000000);
  
  
  
  
  SELECT A.ACCOUNT,
         A.BEGIN,
         A.END,
         A.AMOUNT,
         B.ACCOUNT,
         B.BEGIN,
         B.END,
         B.AMOUNT
    FROM TABLEA A
    LEFT JOIN TABLEB B
      ON A.ACCOUNT = B.ACCOUNT
  

  Hello

  SeshuGiri wrote:

  Hi Frank,.

  Your query/solution works very well, but I forgot to mention something in the first post...

  Please insert these additional lines and try the request again.

  TableA Additional lines:

  1. Insert into TABLEA (ACCOUNT, BEGIN, END, QUANTITY)
  2. values ('F9999', to_date (January 2, 2014 ',' dd-mm-yyyy ""), to_date (3 January 2014 ', 'dd-mm-yyyy'), 999.0000000000);
  3. Insert into TABLEA (ACCOUNT, BEGIN, END, QUANTITY)
  4. values ('A1234', to_date (March 3, 2014 ',' dd-mm-yyyy ""), to_date (4 March 2014 ', 'dd-mm-yyyy'), 999.0000000000);

  TableB Additional lines:

  1. Insert into TABLEb (ACCOUNT, BEGIN, END, QUANTITY)
  2. values ('A1234', to_date (March 3, 2014 ',' dd-mm-yyyy ""), to_date (4 March 2014 ', 'dd-mm-yyyy'), 999.0000000000);

  Question 1:

  The table has a rows for A1234 account (i.e. the time period different than the ranks for the same account)

  one is A1234 31/01/2014-03/03/2014, A1234 03/03/2014-03/04/2014

  Your query that returns two rows for A1234 account (which is what I want), but the amount is messed up.

  	ACCOUNT	BEGIN	END	TOTAL_AMOUNT
  1	A1234	31/01/2014	03/03/2014	1100
  2	A1234	03/03/2014	03/04/2014	1100

  Except:

  	ACCOUNT	BEGIN	END	TOTAL_AMOUNT
  1	A1234	31/01/2014	03/03/2014	101
  2	A1234	03/03/2014	03/04/2014	999

  Question 2:

  In some cases TableA will have an account (F9999), but the TableB don't. I can just this line by making the Left Join right join?

  I don't get the results with additional data. I get 1099 for two lines where account = 'A1234 '.  I get 1100 as the amount on the line with the account = "D5555.  You did it other changes to data?

  Except:

  	ACCOUNT	BEGIN	END	TOTAL_AMOUNT
  1	A1234	31/01/2014	03/03/2014	101
  2	A1234	03/03/2014	03/04/2014	999

  Still, I don't see why you want to 101 for the amount of the first row.  Why not 100?

  How can you know which rows from tablea should get attached to what rows from tableb, when the account is not unique?

  Maybe you want something like this:

  SELECT a.account

  b.begin

  b.end

  SUM (a.amount) AS total_amount

  FROM tablea a

  ON a.account = b.account JOIN tableb B

  AND a.begin BETWEEN b.begin

  AND b.end

  AND a.end BETWEEN b.begin

  AND b.end

  GROUP OF a.account, b.begin, b.end

  ORDER BY a.account

  ;

  but I guess just to your needs, and guessing is not a very good or reliable way to solve problems.

  Question 2:

  In some cases TableA will have an account (F9999), but the TableB don't. I can just this line by making the Left Join right join?

  Yes, it looks that you want an outer join.  What happened when you tried?  As always, post your code, the exact results you want from the given sample data, as well as an explanation of how you get these results from these data.

• Full thread subject: serial number of: removed my moderator > (Add sender preferred) Date: Wednesday, November 4, 2015 16:01 to: removed my moderator > yesterday I bought and downloaded the Upgrade Version of Lightroom 6 (AD order number

  Full thread

  Object:

  Serial number

  From:	< < deleted my moderator > (Add as favorite sender) https://email02.secureserver.NET/webmail.php?folder=Inbox.Sent_Items & firstMessage = 1

  Date: Wednesday, November 4, 2015 16:01 VOX < removed my moderator >

  Yesterday, I bought and downloaded the Upgrade Version of Lightroom 6 (order number AD018505688).  To complete the installation of the upgrade, I need the serial number for my Lightroom 5.  Unfortunately, I was able to locate only the installation but DVD no box with the serial number on this subject.  Proof of purchase, B & H Photo, for my 5 Lightroom is attached.  Please advise me on how I can proceed with the activation of my Lightroom 6 upgrade.  I think that my proof of purchase must be sufficient to provide you with directions on how to complete the installation of my Lightroom upgrade of version 6.  I'm sure you've had other customers with similar problems. John McAnulty Focus photography

  	Spare part	Size	Action (s)	Send to

  BH_448823120.PDF

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• Universal Clipboard is encrypted and how the data is stored in iCloud

  Hello

  You need a deep understanding of the works of the new, universal Clipboard feature safety? The feature is nice, but do you copy your password by company store system administrator password... This password is moving all over the world and also through Apple servers... Don't make me happy.

  Who can guarantee that the communication is encrypted and the data stored in iCloud are not used for other purpose?

  Thanks and greetings

  Security and privacy - Apple Support Overview iCloud

  Although not listed here, all data transmitted to the Apple servers is encrypted in transit and on the server.

  I can't offer any advice on the question of whether your transmissions could be intercepted and decoded.

  They say they also unequivocally that they never provide encryption keys to any third party. Which has been further strengthened with their recent dealings with the FBI.

  You'll have to decide for yourself if you agree with what Apple says.

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards

• How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  Menu, file == > export - check boxes to include metadata and location- export to iPhoto

  LN

• I try to uninstall firefox 20 and install the latest version of firefox, but it won't uninstall. He remembers all my data if I install again.

  I'm trying to uninstall Firefox 20 and get the latest version which I think is version 21? He won't let me unistall it when I go to menu start and hit on uninstall a program and choose Firefox. It shows 'Please wait while firefox is unistalling', but it never uninstall. The bar moves ever green. I tried to uninstall manually and then install firefox 21 but then firefox 20 returned to the top (after I installed the new version) with all my saved data. It seemed that he did until I uninstalled manually, or thought I did.
  I don't want any of my data. Just a sweet page!

  I don't want just the homepage firefox, no google, yahoo, etc... I can't understand this. Apparently, I'm technically challenged thought!

  If anyone can help, please let me now. I run Windows 7 pavilion laptop.

  Personal data are stored in the profile, not in the program directory. If you uninstall, you can remove all the data with an extra parameter.

• I have a problem. Update of Flash Player required you must download and install the latest version of Adobe Flash Player to view this content. but my Flash player is up-to-date. I use ubuntu10.4, firefox 8.0

  I have a problem. Update of Flash Player required you must download and install the latest version of Adobe Flash Player to view this content. but my Flash player is up-to-date. I use ubuntu10.4, firefox 8.0

  You are welcome

• Firefox 4 does not save form data after sending form and pressing the previous button

  Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

  See:

  • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • Check if Firefox automatically fills in forms

• How can I enter BIOS compaq610 screen and set the date, time

  How can I enter BIOS compaq610 screen and set the date, time

  Hello

  See Page 94 or Page 100 (according to what's relevant) of your & Maintenance Guide.

  Kind regards

  DP - K

• Read xls file and display the data in the table.

  Hello

  Try to read the data from an xls or csv file and fill the same data in the table. If I need to use the table to store the data from the file and display, hoping that someone could help.

  Thank you

  Hari

  Hi hari,.

  One thing that is very important when you use the Excel activeX interface (in case you need it) is good termination of worksheet/workbook/lettering handles.

  You need these handles to specify what cell in which file you are trying to access.

  If you are unable to throw each handle you have, then you will be left with ghost Excel process in your task manager, devours your system's memory.

  Thus, when debugging of your application, open the Task Manager and the watch as Excel treats created/destroyed and make sure that you end up with zero Excel process running when your application is closed.

  Also consider the case of fault for your program. Check that your exit routes did not omit any termination of handle.

• Save the data before and after the occurrence of a Trigger Condition.

  Hello

  I am worrking on an application that acquires data from 64 channels and performs many analyses.

  Necessary to implement something is recording the data in the event of alarm condition.

  I've implemented datalogging in many previous applications, but this one is difficult.

  I need to save data for a few seconds before and a few seconds after the alarm has occurred in a single file.

  I thought constantly write data to a file PDM and at the same time deleting the old data, until the alarm trigger occurs.

  but I was not able to do, since I have no blocks to remove data from a PDM file.

  I'm looking for the ideal approach to this recording.

  Any help will be appreciated.

  What I have to do this in the past, use of a queue with loss as a circular buffer.  When you get the relaxation, dump you the data in the queue to your file and then save however many data you want after the outbreak.

  For the purposes of the memory allocation, do not use the queue to rinse.  Use rather a Dequeue element inside a conditional FOR loop with a 0 timeout (reading the queue stops when you have a timeout or you read X samples).

• Select the list box file and read the data from file

  I can list the files in the folder in the listbox

  1. I want to just list file .txt files

  2. How can I read data from the selected file (.txt)?

  I think that's what you want, enter a model in your list of files vi (for example, *.txt) and then just use File.vi text of reading by using the selected item in the list box (double click on event or value change) and use the starting for the vi records list path.  I have included a crude extract for your pleasure.

• Search a directory of data and display the data that is within the range of dates

  Hello

  I have a full idrectory of data from overtime, and I think of search in the directory and display the data files for specific dates. I only started this encoding yet but I figure I'll take the brain of some SMEs here labview and start in the right direction. My goal is to go through a comprehensive directory of data taken for a month or MORE csv files and select the data to process and display office files the date of its registration. If I take the data of last week, last month or last minute, it should just treat as an exact or more.

  Please help me get started on the right foot

  End date will be probably greater than the start date, right? So, end date must connect at the entrance to the upper limit. Then wire in the range? to the conditional terminal of a tunnel of conditional indexation.

  Lynn