date and time error

Similar Questions

• wildly incorrect date and time iPad - generated error message

  My son has a mini iPad and recently received a chrome error message, saying that his connection can not be deprived or suspected piracy activity. This avoids him to use chrome. I read on the forums that people with this error had fixed successfully it by checking that the iPad had the right date and time. When we went into settings to check for it, the date and the hour showed that on 2 May 1970 (?) It is currently only 23 April 2016, so I would say it's a little out of sync... When we try to manually set the date and time, that he jumps back between 1970 and 2038, but will NOT fix the correct date. We tried all means possible to work around this problem, but the problem persists. We are not technically competent, just frustrated end users. Someone at - it a preview? Thank you.

  There was this problem going around a few weeks where the user deliberately set their date to January 1, 1970 that their devices in brick. That looks like what happened to your son, however.

  If you have changed the date of May 1970 or earlier and cannot restart your iPhone, iPad or iPod touch - Apple Support

  Have you tried to change the date slowly moving upward a few years at a time? I know that can take some time, but it might be useful. A forced reboot might help as well.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo. After the reboot, you may be able to change the date to get chrome.

  If you can go back in Chrome, clear cookies and the data of the Web site. Press the 3 points in the top right of the toolbar of the browser and the. Select settings at the bottom of the window. From there, tap the privacy in the next window, you will be able to erase the data.

  

• Equium L20-198: error 0271 check date and time settings.

  My apologies if this appears twice, I tried to change and I somehow lost my thread.

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  > Is it possible that the CMOS battery charge the main battery and this is my problem?
  Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
  It s not I known if battery CMOS takes the power of the main battery
  Usually the CMOS battery should always charge in work and when the laptop is plugged in
  So, theoretically the main battery has no influence on the CMOS battery.

  I think it might be a mobo problem, I think this could be a reason for it

  By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...

• L20-198 error 0271 check date and time settings

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

• Equium M40X - error at startup; 0271: check date and time

  Hi when I start the laptop the message:

  ERROR
  0271: check date and time
  WARNING
  0251: System CMOS checksum bad - default configuration used

  Press to resume, installation

  I guess it's because my CMOS battery has had? Is this a known issue with this laptop and how do you get him to replace?

  Hello

  It seems that your laptop is the wrong time in the CMOS (BIOS).
  If you can get into the BIOS, check the date and time settings and ensure that they are correct.
  It may also be a case of the CMOS battery out. In this case your laptop will tend to not keep the correct time.
  In this case, you must connect the power adapter and should leave it connected for 20 to 24 hours. At the end of this period the CMOS battery must be fully charged.

  Good luck and best regards

• Open a session and the date and time of errors in Windows Vista

  Cannot logon on.keep try and finally, through the use of the Media Direct button get a date and time messagethat eror arein error and then F2 screen system and year, correct date and time, then regular diary on the works. If I logout using the closing of the same happen when I try to go back on, screen white, persevering, error message about the date and time, etc.
  If I get off using 'sleep' can come back on the next time I do not know if this is recommended all the time.

  Hello

  Method 1:
  You can check the link provided and check:
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2:
  You can update the BIOS (Basic Input/Output System)... You may need to contact the manufacturer of the BIOS update

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I have a registration error trying to download a disc. It is said, your operating system Date and time format do not match the expected for PM Fastrack run format.

  Error in saving of the PM FASTrack.
  Impossible to analyze the dayYour operating system Date and time format do not match the expected for PM FASTrack run format. The format should be mm/dd/yyyy hh: mm:. The format is

  It's my complete error message. The time is set in this format on the computer. How should I do?

  Hello Murphy,

  Thanks for posting your question on the Forums of community of Microsoft.
  From the description of the question, I understand this format date and time do not match for PM FASTrack run.
  Let me go ahead and help you with the issue.
   
  You did changes to the computer before the show?
   
  I suggest for the link and follow the steps in the article, and check if this can help:
  Change the display of dates, times, currencies, and measures
  http://Windows.Microsoft.com/en-in/Windows7/change-the-display-of-dates-times-currency-and-measurements
   
  Also, check out the support links:
  PM FASTrack support.

  http://www.rmcproject.com/support/PMP/errors/error4.aspx

  http://www.rmcproject.com/support/support-registration2.aspx

  http://www.rmcproject.com/support/PMP/v7/FAQ-4common.aspx

   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Error 0271 check Date and time - T60

  Whenever I start my T60, it is said to check date and time settings and go to the BIOS, which emits only if I press one of the buttons on the keyboard. Thinking it was a CMOS battery problem, I ordered a new one. However, the same thing happens again. I'm puzzled. How can I fix? Thank you.

  Welcome to the forum!

  You must scroll through "Time and date" settings in the BIOS, correct them and press F10 to save and exit.

  Good luck

• The batch change date and time

  I have a lot of photos which, for some reason, have lost their correct dates and hours of creation, so I was eager to correct in an easy and enjoyable way.  I unfortunately discovered that Photos is not the batch option to change that used to be in iPhoto.

  When you try to find a solution to my problem, I fell on this batch Change Date and time on a fixed Date, which works well, but not quite how I want it.  What I want to do, that's exactly what the script above does, but rather than increment by 1 minute of each photo, I want to increment by 1 second intervals by photo.

  Having not really used AppleScript before, I tried to change the references to the 'minutes' to 'seconds' but that did not work.  Is it possible to do using above seconds instead of minutes?

  Any guidance would be greatly appreciated.  Thank you.

  Just delete the text "" * minutes ' in the lines where the date is changed. "

  Then time will be incremented seconds.

  For example, for the first version of the script use:

  the value timeIncrement to 1 - increment of time in seconds

  (* select at least 2 images in Photos *)

  say application 'Photos '.

  activate

  game imageSel for (get selection)

  if ({ is } imageSel) or (the length of imageSel < 2) then

  error "Please select at least two images."

  on the other

  defined first_image to the point 1 of the imageSel

  the value first_date to (the date of first_image) as date of

  Repeat with I from 2 to the County of imageSel

  put next_image to the point I of imageSel

  the value next_date to (the date of next_image) as date of

  the value time_difference to (first_date - next_date) + ((i-1) * timeIncrement)

  say next_image

  the value le Date of next_image to (next_date + time_difference) as date of

  end say

  end Repeat

  end if

  return "Set the date and time of" & (the length of the imageSel) & 'photos. The last date is "& ((the date of next_image) as date)"

  end say

  
  

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Adding a date and time to create a channel in a data plugin

  I would like to preface this question with the fact that I am new to VBS programming.  What I want to do is to create a plugin. Most of it is done, but I'm having a problem with the addition of two times to a.  I have a text file that stores the date and time separated by a tab character.  This file format was designed to excel.  When I bring him both the date and time are in different channels and I can not figure out a way to add both and either replace them or even place it in a separate variable.  Here is an example.

  Chan (1) contains the date, Chan (2) contains both.  This statement, which places the data in the string is:

  The StandChannels value (0). Values (k) = Chan (1). Values (i)

  I tried:

  The StandChannels value (0). Values (k) = Chan (1). Values (i) + Chan (2). Values (i)

  error: object doesn't support this property or method

  or

  Chan (1). Values (i) = Chan (1). Values (i) + Chan (2). Values (i)

  error: object doesn't support this property or method

  I tried several other iterations and have had no success.  This seems to be an easy task, Miss me probably something simple.

  Hi Eric,.

  The first problem is that your datetime format string was wrong, you need to use:

  File.Formatter.TimeFormat = "MM/DD/YY SS.fff.

  Or maybe if your year is first of all it must be:

  File.Formatter.TimeFormat = "YY/MM/DD SS.fff.

  The second question was slippery.  The newsgroups (0) you throw combines the ProcessedChannel values correctly, but you were not successfully picking off those that you wanted to leave Chan (0).  I don't really know why the method you were using did not work, but I found a similar one that does.  Note that I've only changes part SUB New_File (file, ChanNames) of the code, not the SUB Previous_File (file, ChanNames) part of the code (got tired of typing).

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• reset the date and time on Photosmart all-in - One 7510 C311a

  I need to reset the date and time when I send faxes.  These things are wrong on my Fax.  Can you help me find the place to correct the date and time?

  I did not change my system.

  No error message.

  My OS is Snow Leopard 10.6.8

  Hello

  1. On the Control Panel, press the Setup icon ( ), then tap Tools / Preferences.
  2. Tap the Date & time option.
  3. Tap your desired time zone. Set time is displayed.
  4. Press the arrow pointing upwards ( ) or the down arrow ( ) to set the hour and minutes.
  5. Tap AM or PM .
  6. Touch Daylight Saving if you are in a time zone that adjusts for daylight saving time.
  7. Press OK to confirm the time that you set.
  8. Using the numbers on the Control Panel, press the numbers for the current month, day and year and then press OK

• How do I set the date and time for those?

  Windows Vista; all the time that the I shoot my computer automatically go back to the year 2001; so whenever the I put on the computer I need to set up the date and time;  With the help of Windows, after the< is="" an="" error="">, but did not mention the number or how to fix it, please help

  Hello

  If after having set the time/Date and stop and restart your machine the time means the 2001 2007 2009 year ETC, you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  See you soon.

• My problem is setting in my office date and time.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! every time I have to connect to my laptop, an error message will appear. I need to check my date and time. and when I check, it does not. I tried manually reseting but it did not work when I restart my computer. Also in my date & time zone there is no specific place which may work for me. Theres no philippines listed. And I tried the update at the time of the internet and the answer is successful. but when I re start my computer is the same problem I met.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Chances are good that the CMOS battery that powers the clock when the computer is shut down has not or it is so low, that it is working properly.  Try to replace the battery and see if that solves the problem with the clock not the hold time (and this willl happen if you use the time synchronization because when the power is off, the clock needs the battery to keep read time).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.