Date of entry in milliseconds

Similar Questions

• The use of pins of status (4 outputs) and data (8 entries) of the parallel port pins at the same time.

  Hi all

  I'm a newbee in labview. As part of my project work, I need to get 8 digital inputs and send 4 digital outputs.so I think to use the Parallel Port on the pc.i can make use of 8 datalines for entries. I found the site NOR is it possible to use status for output pins. But is it possible to use status for output pins pins and data for entries to the time.please help even me also mention of the measures to take, or keep in mind while implementing.also include any example vi that could be useful.

  Thanks in advance

  I would recommed you to NOT use the parallel port. Now a day you have hardly a PC with parallel port. also if you have some old PC then most likely last version of LabVIEW (e.g. 2010) will need a lot more memory RAM and processor.

  If you want a solution very very low cost then I would recommend using an arduino to that effect. You can then download LabVIEW Interface for Arduino and start working.

  If you continue to use the parallel port, then you could try (I haven't worked with parallel port and have not tested the following solutions)

  Download VIPM and then install the enclosed package. It will add the port e/s palette in your labview. and you can use it.

• Set the date value pick for a component of Date of entry.

  Hello
  
  Am using jdeveloper 11.1.1.6.0
  
  I slipped and fell to choose Date and Date component.
  
  When my user selects the vale of the ChooseDate component, it must be included in the component of Date of entry.
  
  Could someone help me pls?
  
  Kind regards
  Prasad K T,.

  Hello

  Take a look at the property of chooseId: http://docs.oracle.com/cd/E23943_01/apirefs.1111/e12419/tagdoc/af_inputDate.html

  Frank

• SQL error: ORA-01840: value not long enough for the format of the date of entry

  It is a delete SQL in a driver of demand, which gives no error, but does remove all the lines either. I have converted the removal 'from' to ' Select * ' and may see the following error:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "CAL_0812")
  Error report:
  SQL error: ORA-01840: value not long enough for the format of the date of entry
  
  
  The interesting thing is that if I attach a condition of emplid, then the SQL above does not give an error and return lines:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "FM_CG_0812")
  and emplid = "1234"
  
  now, if the number of lines is identified (by giving more number of emplids), it begins to give the error when the number of rows returned is greater than about 30. It is completely independent of what employee is used, so there is no question of data dependence.
  
  Function optimizer cost is off and a subquery nest is off on the init.ora file
  
  subquery UNNEST= false
  
  optimizercost_based_transformation = off
  
  
  I don't know if it has something to do with this problem.
  
  Explanations would be welcome!
  
  Thank you
  Vikas

  I think it is question of data combined with a not very sensible date format mask (it could fail when the null data, because of your concatenation with '01' and work when not null data).
  Have you tried with a simple TRUNC?

  Your code:

  ...TO_DATE(TO_CHAR(ELG.PRD_END_DT, 'YYYY') || TO_CHAR(ELG.PRD_END_DT , 'MM') || '01' , 'YYYY-MM-DD') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  After change:

  ...TRUNC(ELG.PRD_END_DT , 'MM') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  Nicolas.

• Need help get data with the most recent date of entry into

  Hey guys;
  
  I need help with fine tuning a query to get the one with the most recent implementation.
  
  Here's my current query:
  
  /**********************************************
  Select sge.seal_group_id,
  SGE.equipment_id,
  SGE.effective_date
  of seal_group_equipment EMS.
  seal_group sg
  where equipment_id = 48801
  AND EMS. SEAL_GROUP_ID = SG. SEAL_GROUP_ID
  and sge.end_date is null
  Group of sge.equipment_id, sge.seal_group_id, sge.effective_date
  After having sge.effective_date = max (sge.effective_date)
  
  ******************************************************/
  
  Which produces the following results:
  SEAL_GROUP_ID - EQUIPMENT_ID - EFFECTIVE_DATE
  25-48801 - 01/01/1993-00: 00:00
  11730-48801 - 22/08/2003 08:42:11
  
  
  What I really need, is to show only the line with the most recent date of entry into
  I hope someone can help
  Thank you

  MAX will not work because the SEAL_GROUP_ID could depart. I would say analytical:

  select seal_group_id,
  equipment_id,
  effective_date
  from (
  select sge.seal_group_id,
  sge.equipment_id,
  sge.effective_date,
  RANK() over (partition by equipment_id order by effective_date desc) r
  from seal_group_equipment sge,
  seal_group sg
  where equipment_id = 48801
  AND SGE.SEAL_GROUP_ID = SG.SEAL_GROUP_ID
  and sge.end_date is null)
  where r = 1;
  

  Keep in mind if two records have the same effective_date, they would both appear.

  Note: query above has not been tested, since there is no script provided.

• Date of entry of data

  How to add a date of data entry for new cards to Contacts?

  Opening of the contacts.

  in the menu bar, click contacts

  Select Preferences from the drop-down

  Click the model tab in preferences

  In the model that appears - click Add a field at the top

  Choose the date

  specify a type for the new date field (there is one type of 'other')

  ~ Scott

• Programmatically changed data limits entry not accepted values

  Hey there,

  I need to change the input limit by program data, but if there are values in the table, they don t get under duress to new limits.

  Is there a possibillity to accept new limits of data entry for existing values?

  Niklas Nawrath

  Niklas,

  What version of LabVIEW are you using?  I was able to reproduce your problem in LabVIEW 2011 but this seems to be fixed in 2014.  I messed around with the reading of the values in the table and write the same values (signaling) in the table to see if this makes the values compel, but it seems only to force the value of final table for me.

  Unless you want to update LabVIEW I second the idea of using the range in and force function.

• A digital control takes no account of the limits of data at entry entry is typed, why?

  Limits of data located in the property entry seem to have no effect on data entry. A value written to a property node limit the contribution of the increment of buttons but not the data which are entered in the control. How to stop digital control to accept out of desired range values? In the attached example, why I can type in any number for control and data entry limit is ignored?

  In the Properties window of data entry for the digital control, you have the "answer of value out of range" ignore the value.  Change it to compel.

• date of the such as default date for entry date component?

  Hello world

  My version of Jdev is 11.1.2.3.0.
  I have a component of af: inputDate and a table on my page of the ADF.
  After selecting one of entry date of the value changes the listener triggers and updates the table based on the date below. Everyhting works fine.

  But when load us the page the entry date is empty, I need to display the current date as a default value, then after new seleting date that the table needs to be updated.
  How can I set current date as the default date in the entry of date component?

  All suggestions will be really useful.

  Thank you.

  In other words, check to see if the binding property to date. MinValue have the correct value:

  Binding = "#{viewScope.ManagedSampleBean.date1} '"

• How to convert the Dates of entry into ReminderInfo in observed activity!

  Hello

  We read the Date and time of the reminder of the user via the form. We want to link this entry date and time with ReminderInfo data type to set

  Reminders in activity Task Assign.

  Please find the ppt for more information.

  Please help us in this regard.

  Thank you

  Praveen

  Drag a SetValue component and add assignments (see the screenshot to the assignment)

  Repeat the same thing for hours and minutes

  Nith

• Health - weight data manually entry

  I would like to know why on Earth - with iOs 10 - it is no longer possible to manually enter the data on weight - with no need to another application or gadget - as I have done every day since I got my iPhone.

  Health App > measurements > touch it if you have the weight widget and enter a new.

  If not click on medical id in the lower right corner, select Edit and change your weight from there.

  Edit: You can also type the weight in the search under the health APP bar and it will come back to allow you to change it.

• TCP data flow is interrupted by recording data (text entry)

  Hello, I am currently working on a senior design project where my team is currently developing a control system for a small wind turbine. We are adding sensors and wireless systems to the turbine. The sensor data will be collected and sent over a TCP connection. The Labview will serve as the listener and display the values on the web.

  I have problems with the registration however data.

  I would like for where you put in the time, you the datalogger to be active, then press a button and the data logger records the incoming values on the TCP connection and create a CSV text file.

  Whenever the loop of data logging is running, stops the flow of data from the sensor so all my recorded values are the same for the duration.

  Any input would be appreciated.

  Thank you!

  
  

• long integer value - setting the date of entry

  Hello

  I'll send a calendar event while recording up to a database on my server.

  When I retrieve this entry and try to rebuild the entrance on the device, I have problems with starttime and endtime.

  I use Long.parseLong (myStartTime) (in order to define the start time of the new entry) and get a number format exception.

  So after struggling to find a solution, I tried to manually set for the tests.

  myStartTime = 1283778000000; This is the beginning of the time value of the downloaded

  I get the whole number too big.

  Someone at - he also experienced difficulties affecting a schedule start time entry like this?

  Please can someone offer a suggestion?

  Thank you Alex

  Have you tried just Long.parseLong (String)? Who will use the base 10. (Or you can specify 10 as the radix).

• How define today a date of entry to create with params

  Hi Experts,

  JDev 12 c,

  I use CreateWithParams, and I wanted to put a Date as today's date field. So how can I do?

  I tried the HrDate field mapping and set value as adf.currentDate and its type like oracle.jbo.domain.TimeStamp.

  When I run the page I get the below error.

  java.lang.IllegalArgumentException

  at oracle.jbo.domain.Date.parseISO8601FormatString(Date.java:628)

  at oracle.jbo.domain.Date.toDate(Date.java:609)

  to oracle.jbo.domain.Date. < init > (Date.java:390)

  to oracle.jbo.domain.Date$ 1.convert(Date.java:116)

  at oracle.jbo.domain.TypeFactory.get(TypeFactory.java:870)

  at oracle.jbo.domain.TypeFactory.get(TypeFactory.java:574)

  at oracle.jbo.domain.TypeFactory.getInstance(TypeFactory.java:351)

  at oracle.adf.model.binding.DCMethodParameterDef.resolveParameterValue(DCMethodParameterDef.java:225)

  Thank you

  Animesh

  This marker is used as reolved.

  Here is the solution

  	public final void insert (ActionEvent actionEvent) {}
  	Add the code in the event here...
  	OperationBinding ob = (OperationBinding) ADFUtils.findOperation ("Createwithparameters");
  	ob.getParamsMap () .put ("Hrdate", new oracle.jbo.domain.Timestamp (System.currentTimeMillis ()));
  	OB. Execute();
  	} The TIMESTAMP has not been properly defined in OT. So now it is resolved. <> Name = "Hrdate". ColumnName = "HRDATE." SQLType = 'TIMESTAMP '. Type = "Oracle.jbo.domain.Timestamp" ColumnType = "TIMESTAMP". TableName = "EMPLOYEENAME" > NDName: Hrdate NDType:oracle.jbo.domain.Timestamp

• Date of entry into monthly intervals

  Hello

  How could I do a count by month but from a certain date.

  I want to count the number of decreases from. So count on Jan 14, then another month to Feb. 14, March 14 etc...

  Jan - 14	Feb - 14	Mar - 14	Apr - 14	-14 may	Jun - 14	Jul - 14	Aug - 14	Sep - 14
  50	120	30	etc.

  example:

  SELECT COUNT (*), - the MONTH of

  TABLE

  Group by MONTH

  Hello

  Chloe_19 wrote:

  Hello

  How could I do a count by month but from a certain date.

  I want to count the number of decreases from. So count on Jan 14, then another month to Feb. 14, March 14 etc...

  Jan - 14	Feb - 14	Mar - 14	Apr - 14	-14 may	Jun - 14	Jul - 14	Aug - 14	Sep - 14
  50	120	30	etc.

  example:

  SELECT COUNT (*), - the MONTH of

  TABLE

  Group by MONTH

  To map all the dates in a calendar month with a common value, use TRUNC (d, 'MONTH').

  However, grouping which will produce a separate line for each month, not a separate column as you asked.  For the different columns for different months, use SELECT... PIVOT, like this:

  WITH relevant_data AS

  (

  SELECT TRUNC (MONTHS_BETWEEN (hiredate, DATE ' 1981-01-01')) + 1 AS month_num

  FROM scott.emp

  )

  SELECT *.

  OF relevant_data

  PIVOT (COUNT (*)

  FOR month_num IN (1 AS jan_1981

  2 UNDER feb_1981

  --  ...

  12 AS dec_1981

  )

  )

  ;

  Fill in the other months should be easy.

  Output:

  JAN_1981 FEB_1981 DEC_1981

  ---------- ---------- ----------

  0          2          2

  For more info on swivel (including other ways besides SELECT... See the FAQ of the PIVOT forum): Re: 4. How can I convert rows to columns?