Programmatically changed data limits entry not accepted values

Similar Questions

• UAC WILL NOT CHANGE THE ADMINISTRATOR, WILL NOT ACCEPT SECRET ADMIN, RESTORE THE SYSTEM, SFC OR MSCONFIG

  • Recently, I tried to delete a program and received the error that I need to log on as an administrator. Original set up was for single user.  UAC icon a panel show me as a standard user. By clicking on select account type by selecting administrator, and change account type brings back me to the screen of type change original account with my screen showing always name standard user. UAC is disabled message when the system is restarted.
  • Trying to set up or access the secret or using the admin account emergency create a new account, administrator naming TEST or any name alpha returns error "the specified account name is not valid. Cannot contain the following characters / \ ><+=>
  ?:;...   Any character for a standard or administrator account, or alpha name valid returns this error.
• SFC or back command MSCONFIG error solutions' you have not privleges, sufficient to run this utility or 'you must be an administrator running in the console session' for access...
• Programs, tools, the system restore System Restore returns error "you have been refused permission...". "RSTRUI.exe BACK returns"error unexpected-class not registered Ox800040154.
• Here is copy of my current version\policies\system of the registry
• Key name: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\
• Name of the class:
• Last write time: 01/05/2010 - 14:30
• A value of 0
• Name: ConsentPromptBehaviorAdmin
• Type: REG_DWORD
• Data: 0x2
• Value 1
• Name: ConsentPromptBehaviorUser
• Type: REG_DWORD
• Data: 0x1
• Value 2
• Name: EnableInstallerDetection
• Type: REG_DWORD
• Data: 0x1
• Value 3
• Name: EnableLUA
• Type: REG_DWORD
• Data: 0
• Value 4
• Name: EnableSecureUIAPaths
• Type: REG_DWORD
• Data: 0x1
• Value 5
• Name: EnableVirtualization
• Type: REG_DWORD
• Data: 0x1
• Value 6
• Name: PromptOnSecureDesktop
• Type: REG_DWORD
• Data: 0x1
• Value 7
• Name: ValidateAdminCodeSignatures
• Type: REG_DWORD
• Data: 0
• Value 8
• Name: dontdisplaylastusername
• Type: REG_DWORD
• Data: 0
• Value 9
• Name: legalnoticecaption
• Type: REG_SZ
• Data:
• Value 10
• Name: legalnoticetext
• Type: REG_SZ
• Data:
• Value 11
• Name: scforceoption
• Type: REG_DWORD
• Data: 0
• Value of 12
• Name: shutdownwithoutlogon
• Type: REG_DWORD
• Data: 0x1
• Value 13
• Name: undockwithoutlogon
• Type: REG_DWORD
• Data: 0x1
• Value 14
• Name: FilterAdministratorToken
• Type: REG_DWORD
• Data: 0
• Value 15
• Name: EnableUIADesktopToggle
• Type: REG_DWORD
• Data: 0
• Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\UIPI
• Name of the class:
• Last write time: 02/11/2006 - 11:28
• Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\UIPI\Clipboard
• Name of the class:
• Last write time: 02/11/2006 - 11:28
• Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\UIPI\Clipboard\ExceptionFormats
• Name of the class:
• Last write time: 02/11/2006 - 11:29
• A value of 0
• Name: CF_TEXT
• Type: REG_DWORD
• Data: 0x1
• Value 1
• Name: CF_BITMAP
• Type: REG_DWORD
• Data: 0x2
• Value 2
• Name: CF_OEMTEXT
• Type: REG_DWORD
• Data: 0 x 7
• Value 3
• Name: CF_DIB
• Type: REG_DWORD
• Data: 0 x 8
• Value 4
• Name: CF_PALETTE
• Type: REG_DWORD
• Data: 0 x 9
• Value 5
• Name: CF_UNICODETEXT
• Type: REG_DWORD
• Data: 0xd
• Value 6
• Name: CF_DIBV5
• Type: REG_DWORD
• Data: 0 x 11

This who should I try next?



Try the second link in the HAA procedure (the one in the post two above this).  That it does not require that you start the system, like the first.  You can work and if it can solve your problem without having to reinstall the system.  At least give it a try and then tell me if I am wrong and even the process cannot be done.

I hope this helps.

Good luck!

====================================================================================================================

Xenypoo,

Please ask your question in the Forums of Windows7 in the: http://social.answers.microsoft.com/Forums/en-US/category/windows7.  Your situation is different, and I don't want to mix the answers here with people wondering to which a response is addressed.  Thank you!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Date limited to NOT allow the random text?

  Hello

  I use LiveCycle ES3.  This may seem like a stupid question, but how do I prevent users from random input, not- date text, such as "adsfasdfkafsdj" in a date field?  I defined the required field and set the modes of display/editing/validation validation as indicated below, but still I can enter the random text in the field. Indeed, it appears saying the date is in the wrong format and return correctly, but then the right cursor moves to the next field, leave the incorrect text in the date field and does not require the user to correct my custom error message.

  View model

  Date {MM/DD/YY}

  Edit the model

  Date {m/d/YY} | date {MM/DD/YYYY}. date {MM/DD/YY} | date {MM/DD/YYYY}. date {M/DD/YY} | date {M/DD/YYYY}. Date {mm/D/YY} | date {D/mm/yyyy}. Date {M.D.yy} | Date {M.D.yyyy} | date {mm. DD. YY} | date {MM DD. YYYY} | Date {M.DD. YY} | Date {M.DD. YYYY} | date {Messrs. D.yy} | date {mm. D.yyyy} | Date {M-D-YY} | date {M-D-YYYY} | da te{MM-DD-YY}|date{MM-DD-YYYY}|date{M-DD-YY}|date{M-DD-YYYY}|date{MM-D-YY}|date{MM-D-YYYY}| Date {MMDDYY} | date {MMDDYYYY}

  Model validation

  Date {m/d/YY} | date {MM/DD/YYYY}. date {MM/DD/YY} | date {MM/DD/YYYY}. date {M/DD/YY} | date {M/DD/YYYY}. Date {mm/D/YY} | date {D/mm/yyyy}. Date {M.D.yy} | Date {M.D.yyyy} | date {mm. DD. YY} | date {MM DD. YYYY} | Date {M.DD. YY} | Date {M.DD. YYYY} | date {Messrs. D.yy} | date {mm. D.yyyy} | Date {M-D-YY} | date {M-D-YYYY} | da te{MM-DD-YY}|date{MM-DD-YYYY}|date{M-DD-YY}|date{M-DD-YYYY}|date{MM-D-YY}|date{MM-D-YYYY}| Date {MMDDYY} | date {MMDDYYYY}

  With the reasons that I have above, the user should be allowed to enter data in one of these formats, correct?  I am at a loss for which is why it does not work the way it is supposed to.

  Thank you.

  Hello

  It is also possible with a script to the output of the date field event.

  He uses a regular expression to check the value entered for a specific model.

  Allows are the dates of these way: [9: 99] [.|] /| -] [9| 99] [.| /| -] [99| 9999].

  if (! this.formattedValue.match(/^\d{1,2}[\.\/\-]\d{1,2}[\.\/\-](\d{4}|\d{2})$/g)) {
            xfa.host.messageBox("Enter a correct date!", "Invalid Date", 0, 0);
            xfa.host.setFocus(this.somExpression);
  }
  

• jTable does not accept values until I click somewhere else

  Hi all
  I have the component jTable accepts integer values. When I click on the jButton, the action uses the values inside the cells in jTable.
  However, after each entry in each cell, I have to click another cell to let the value of the cell previously written to be accepted. This brings problems when the user don't realize. The usual expectation is that, because I wrote a value in a cell, I can continue by clicking on the jButton to action be executed with who writes the value. Is something about "focus"?

  Hello

  Add this line in the code where you create the table:

  table.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);
  

  Which calls the your table model setValueAt method as soon as focus is more, IE the button.

• Created date field does not accept the correct date?

  Date Created in IPTC field... I enter 1906-01-01 and kick back... the field is now filled w / 2042-02-6.  Lightroom has said that the metadata has been recorded with the original file, but when I look at the image in Bridge (or one that is exported to LR...) I get the correct date that I entered (1906-01-01).

  How can I get Lightroom to display the Date of creation that is anchored w / in the file?

  Thank you!

  This programming bug is most likely due to the use of a 32-bit variable at a certain time, rather than a 64-bit variable.   It would be good that you posted a bug report on the new official website of feedback:

  http://feedback.Photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

  Details of geeks: Date / time on Windows and Mac are often represented as number of seconds more or less from a specific reference date (e.g. 2001-01-01 00:00:00 UTC).   A signed 32-bit integer can represent a total margin of 2 ^ 32 seconds, or about 136 years.   Note that the difference between the entry date (1906) and the displayed date (2042) is 136 years.   So be a date outside the range of 32-bit (1906), caused the time to boil over and wrap around 136 years (until 2042).

• error 800024002 when you try to put up-to-date. system will not accept download powershell. get 0 x 4002 error and the basic error "problem occurred and will leave the download.

  Have HP Pavilion a6110n and windows Vista editions Home premium.  A reboot from recovery disc and Noah update will not work. System has also disabled the netgear router and killed a comcast modem. I think I need computer trash HP 6110.

  Hello

  Repair windows files, to do this, perform an inplace upgrade which would help.
  http://support.Microsoft.com/kb/2255099

• programmatically change the def type

  I inherited program that I'm editing with the least amount of change.  One of the controls is used in all of the auxiliary of the screw, and it's a def type.  It's a cluster containing three groups.  I want to programmatically change the limits of data entry on one of the digital controls in one of the clusters of void.  I can't get to the point where I can create a node property to do this.

  The type of data you get from the [] Controls property is a generic control. You must cast to a cluster.

• Suddenly Mail asks for a password, but it does not accept

  I didn't mail in three days on my desktop computer.  It keeps asking for my password for aol, but will not accept it.  My password has not changed, but it does not accept it.  On all my other devices, the mail comes, and the password is accepted.

  Anyone?

  As is the case with many email providers, AOL may have made some changes at their end. The usual troubleshooting step is to delete this email account > then add it back back

  Let us know - best chance

• Outlook express has suddenly started asking for the password and does not accept it.

  I use Outlook express, rather than signing in via Hotmail.com. I see all of my emails upward to 3 April, but not since. and I can't send it today. It keeps asking me for a password for pop3 and smtp direct password which I know that I have not changed, but it does not accept the (he rememberes them anyway). What has changed in the last 2 days?

  Hi Teresa,.

  Try to login from the Web site and see if your password is work www.mail.live.com

  If you are able to check emails from the Web site, and then type the same password in outlook when you are prompted.

  I hope this helps.

• SQL error: ORA-01840: value not long enough for the format of the date of entry

  It is a delete SQL in a driver of demand, which gives no error, but does remove all the lines either. I have converted the removal 'from' to ' Select * ' and may see the following error:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "CAL_0812")
  Error report:
  SQL error: ORA-01840: value not long enough for the format of the date of entry
  
  
  The interesting thing is that if I attach a condition of emplid, then the SQL above does not give an error and return lines:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "FM_CG_0812")
  and emplid = "1234"
  
  now, if the number of lines is identified (by giving more number of emplids), it begins to give the error when the number of rows returned is greater than about 30. It is completely independent of what employee is used, so there is no question of data dependence.
  
  Function optimizer cost is off and a subquery nest is off on the init.ora file
  
  subquery UNNEST= false
  
  optimizercost_based_transformation = off
  
  
  I don't know if it has something to do with this problem.
  
  Explanations would be welcome!
  
  Thank you
  Vikas

  I think it is question of data combined with a not very sensible date format mask (it could fail when the null data, because of your concatenation with '01' and work when not null data).
  Have you tried with a simple TRUNC?

  Your code:

  ...TO_DATE(TO_CHAR(ELG.PRD_END_DT, 'YYYY') || TO_CHAR(ELG.PRD_END_DT , 'MM') || '01' , 'YYYY-MM-DD') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  After change:

  ...TRUNC(ELG.PRD_END_DT , 'MM') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  Nicolas.

• A digital control takes no account of the limits of data at entry entry is typed, why?

  Limits of data located in the property entry seem to have no effect on data entry. A value written to a property node limit the contribution of the increment of buttons but not the data which are entered in the control. How to stop digital control to accept out of desired range values? In the attached example, why I can type in any number for control and data entry limit is ignored?

  In the Properties window of data entry for the digital control, you have the "answer of value out of range" ignore the value.  Change it to compel.

• iPod 4th generation 6.1.6 not accepting password not correct apple. password has not been changed

  Cannot connect to iMessage or FaceTime on iPod. Able to connect to iCloud. Password has not been changed. Operated the device/off voltage. Still do not accept the password. Any suggestions?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• How to programmatically change the limit values

  Hi all!

  I would like to create a special tool to automatically update the test sertain limits in a file of sequence of the external file.

  I learned TS API and I got Posibility to build trees for levels of sequence and to get a type of step.

  And I found only the possibility to change the limits of the stage in the dialogue window, interactively.

  But I want to change boundaries programmatically without using interactive mode.

  Is there this possibility in the architecture of the API, TestStand?

  Thank you for the information.

  Now I understand how to access the properties of the step of the TS API.

  I use the "AsPropertyObject" method to pass the search string in step and have asked the value of the property.

  I hope it will be enough to solve my task.

  Thank you very much for the support.

• How to programmatically change the z axis limits

  Could show you how to change axis limits (min and max) z programmatically in the attached VI?  It's a simple VI that uses the 3D curve.  Wouldn't be the same on x and thus value axes?  Would appreciate your ideas.  Thank you.

  Hello

  I don't have a LV 7 installed so I can't post the sorry VI... Here's the answer to your question, you must use property nodes and method in the palette of ActiveX (see screenshot), 0 is X, item 1 scale scale Y and point 2 is titled Z scale.

  

  More generally there are lots of discussions on issues of 3D graphics, just do a forum search .

  Hope this helps

• Vista does not accept the password (password not changed or forgotten)

  Vista does not accept the password (we have not forgotten password of windows startup) how can we get around this problem .the password has not been changed or forgotten Vista has a little programming problem which stops the right password

  It is most often caused by the computer being infected, so after you go back into the system, it would be wise to make an analysis.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  You can change your password to something you remember (or use a white) another administrative user account. If you had only an administrative user account, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!