Date of submission to the conversion of TIMESTAMP variable

Similar Questions

• Causing problems of custom data type to deploy the shared target RT variable

  I seem to have some difficulty in using a shared variable published network created from a customized data type when it is deployed as an executable on a target of cRIO RT.  I'll start by describing why I think that this is the rub.  I created my RT VI in the LabVIEW (LV 2012) development environment and everything works fine.  This VI is quite simple, because these were quickly devolved into an exercise in debugging.  The RT VI begins by simply flashing the LED to a couple of times and then starts a loop simple acquisition to read some values out of the material using the analytical engine (while still flashing the LED of the user).  After reading the material, the values are grouped in a cluster and written in a shared variable published to the network defined by a custom control type def.  The custom control contains five floats double precision.  If it's important, the RT cRIO system hosts the shared variable in this case.

  So I have that deploy in the development environment, and everything works fine.  The LED flashes merrily along, telling me that the program runs correctly.  Running a VI host who reads the shared network has published variable gives the desired result.  Everything is good.

  Now, I want the cRIO system to run this simple program by itself at startup.  I build, set it as start VI, deploy it, and then restart the cRIO target.  The LED never flashing... the VI doesn't seem to work.  I'll spare you the major part of the work of debugging and access to the end.  I basically "diagram Disabled" various sections of the code up to the VI began to run correctly in an executable file.  I kept reducing the size of the disabled code until something has been disabled: the writing in the shared variable for the custom data type.

  So, I guess my question is this: are custom data types defined by type def would be personalized orders authorized executables to RT?  I read through the cRIO Developers Guide, my book of development in real time course of NOR and the white paper using shared Variables and I see nothing that forbids it.  I know that there are things not allowed in the executable files that are allowed in the development environment (property nodes façade, dialogue live, operating system specific calls, etc.), but no mention of the shared variable type custom data.  Any ideas as to why my VI is running in the development environment, but does not update unless I have delete the entry on the published network variable shared?

  Thank you in advance for your help!

  You must disconnect the data types of variables and then recompile. You can find it useful to keep on disk, a copy of the original lvlib.

  Don't know if this is a bug or not. It was suggested by someone in the forum that putting the ctl files in the right position (the disk? in the draft?) would allow the rtexe start; I did a quick check and it didn't work then I dropped the tests more far.

• Reliability of the data in the conversion to & from a Variant...

  It is possible to convert any data type to a variant, and then turn it back on.  In doing so, are there data types who will lose information during the conversion process?  If so, why?

  Yes, you can convert any type to a variable ranging and back. There is a VI called "Variant data" which will have a type as input. He continued to convert the variant the correct data. The side variant must know what type of data to expect. He can pull of the Variant. However, you can use a cluster of generic data that consists of a username and a Variant. Then you can have different types of data which can handle the side reception. It is a two-step process. One of conversion the variant of general type (data type and Variant cluster). The second would be a case statement uses the type then covert the internal variant to the specified type. This approach is used for generic messaging systems. The upper levels of the code will know what to do with the data. The lower levels are just generic data passing around.

  I'm not aware of any information that get lost during the conversion of the data to and from a variant. Of course, I not had no problem using them.

• Optimize the conversion of SGL data chain

  As the title indicates, I'm looking to pronounce on a more efficient way (as appropriate) to convert a string into an array of SGL.

  The detachment is just to get feedback on the best ways of doing things from a personal educational point of view. I don't actually have to improve performance... (Just keep improving my skills of codeing.)

  'More effective' here must take to be less cycles of CPU and low memory footprint, in that order. (That is, most small load on CPU is preferred, if smaller memory footprint is at the expense of the other cycles CPU, the hit on memory footprint is preferred).

  The length of the input string comes from a TCP read and contains only the raw bytes of the expected (in this case, SGL) format without any header/footer of meta-data.

  Currently, my implementation is very simple and given that the expected table size is known, I am relying on the loop being smart in his automatic indexation allowance.

  For the conversion, I do a right type-Gallery of 4 characters at once.

  

  The code below, the for loop is simply intended to give a 'real' output boolean if the string length is the length of expected as determined by the input string 'number of track points. No additional error handling is required or necessary.

  I suspect the "subset of string" combined with the iterations (for loop) are the two worst performance in this VI hits, but I can't think of a good way to do the conversion as a table, and if I could, then I should at least do a conversion in 'string to array U8' first.

  Thanks to all who took the time to read and watch. Your time and your contribution is appreciated as always!

  Q

  Hi Q,

  Why don't convert you directly in a table of SGL? No need of a loop FOR, nor for StringSubset...

• problem about dynamic data to the conversion of table 1 d

  Hi all

  I have problem with the conversion between dynamic data and table 1 d.

  I wrote a simple VI to show the problem, as the attached picture. Convert dynamic data in table 1 d, and then return to the dynamics of data, I use 3 tables of waveform display data in 3 different places, but only 'force contact 2' the graph looks normal and the 2 other cards are strange data shows. In addition, the probe indicates that data are all just before going to the charts. What is wrong with him?

  Can someone help me?

  When you convert a table, you lose your calendar information.  You need to convert a waveform and manipulate waveform data.  Use a Structure of elements in Place with waveform components to manipulate waveform data.

  

• Find (weekly) missing date ranges based on the Date of submission

  Nice day:

  I have a table that contains the data with a date of presentation of the report column.  If the requirements are that each employee must submit at least 1 weekly report beginning January 1, 2015, how can I find the weekly reports missing, based on the date of submission of reports.

  The ideas that I had:

  • Left join by partition by date (range between)
  • Create a date dimension view?

  Of course, I'm not sure how to approach this dilemma without creating a query of Monster.  Sometimes the simplest queries mistake me...

  Thank you, Aqua

  Here are the DDL for the table with the information from the presentation report (example):

  --------------------------------------------------------

  -The DOF for Table DTS_FORM_SAMPLE

  --------------------------------------------------------

  CREATE TABLE 'DTS_FORM_SAMPLE '.

  (NUMBER OF 'ID',

  VARCHAR2 (20) "CLOCK_NUMBER."

  NUMBER OF 'EMP_ID,'

  NUMBER OF "REPORT_TYPE."

  DATE OF THE "SUB_DATE.

  ) ;

  /

  INSERTION of REM in DTS_FORM_SAMPLE

  TOGETHER TO DEFINE

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2896, 'XX2444', 12810,1, to_date('02-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2897, 'XX2444', 12810,1, to_date('09-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2898, 'XX2444', 12810,1, to_date('16-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2899, 'XX2444', 12810,1, to_date('23-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2900, 'XX2444', 12810,1, to_date('30-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2901, 'XX2444', 12810,1, to_date('05-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2902, 'XX2444', 12810,1, to_date('12-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2903, 'XX2444', 12810,1, to_date('19-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2904, 'XX2444', 12810,1, to_date('26-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2920, 'XX2444', 12810,1, to_date('19-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2921, 'XX2444', 12810,1, to_date('22-JAN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2922, 'XX2444', 12810,1, to_date('05-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2923, 'XX2444', 12810,1, to_date('26-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2924, 'XX2444', 12810,1, to_date('29-JAN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2925, 'XX2444', 12810,1, to_date('12-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (2965, 'XX2444', 12810,1, to_date('30-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6970, 'XX2444', 12810,1, to_date('18-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6971, 'XX2444', 12810,1, to_date('25-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6972, 'XX2444', 12810,1, to_date('04-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6973, 'XX2444', 12810,1, to_date('11-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6978, 'XX2444', 12810,1, to_date('14-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6979, 'XX2444', 12810,1, to_date('21-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6980, 'XX2444', 12810,1, to_date('28-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6981, 'XX2444', 12810,1, to_date('07-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6948, 'XX2444', 12810,1, to_date('06-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6957, 'XX2444', 12810,1, to_date('09-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6958, 'XX2444', 12810,1, to_date('16-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6959, 'XX2444', 12810,1, to_date('23-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6960, 'XX2444', 12810,1, to_date('02-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8938, 'XX2444', 12810,1, to_date('14-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8939, 'XX2444', 12810,1, to_date('21-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8940, 'XX2444', 12810,1, to_date('28-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8941, 'XX2444', 12810,1, to_date('07-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8942, 'XX2444', 12810,1, to_date('14-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8943, 'XX2444', 12810,1, to_date('21-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8977, 'XX2444', 12810,1, to_date('04-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8978, 'XX2444', 12810,1, to_date('11-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8979, 'XX2444', 12810,1, to_date('11-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8980, 'XX2444', 12810,1, to_date('18-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8981, 'XX2444', 12810,1, to_date('18-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8982, 'XX2444', 12810,1, to_date('25-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8983, 'XX2444', 12810,1, to_date('25-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8984, 'XX2444', 12810,1, to_date('02-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8985, 'XX2444', 12810,1, to_date('02-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8953, 'XX2444', 12810,1, to_date('19-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9824, 'XX2444', 12810,1, to_date('20-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9825, 'XX2444', 12810,1, to_date('20-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9826, 'XX2444', 12810,1, to_date('20-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8972, 'XX2444', 12810,1, to_date('30-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8973, 'XX2444', 12810,1, to_date('30-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8974, 'XX2444', 12810,1, to_date('07-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8975, 'XX2444', 12810,1, to_date('28-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8951, 'XX2444', 12810,1, to_date('12-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8952, 'XX2444', 12810,1, to_date('19-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8954, 'XX2444', 12810,1, to_date('26-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8955, 'XX2444', 12810,1, to_date('26-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8956, 'XX2444', 12810,1, to_date('05-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8957, 'XX2444', 12810,1, to_date('05-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8958, 'XX2444', 12810,1, to_date('12-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8959, 'XX2444', 12810,1, to_date('12-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8960, 'XX2444', 12810,1, to_date('19-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8961, 'XX2444', 12810,1, to_date('19-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8962, 'XX2444', 12810,1, to_date('26-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8963, 'XX2444', 12810,1, to_date('26-MAR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8964, 'XX2444', 12810,1, to_date('02-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8965, 'XX2444', 12810,1, to_date('02-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8966, 'XX2444', 12810,1, to_date('09-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8967, 'XX2444', 12810,1, to_date('09-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8968, 'XX2444', 12810,1, to_date('16-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8969, 'XX2444', 12810,1, to_date('16-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8970, 'XX2444', 12810,1, to_date('23-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8971, 'XX2444', 12810,1, to_date('23-APR-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8976, 'XX2444', 12810,1, to_date('04-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8986, 'XX2444', 12810,1, to_date('09-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8987, 'XX2444', 12810,1, to_date('09-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9041, 'XX2444', 12810,1, to_date('16-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9042, 'XX2444', 12810,1, to_date('16-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9043, 'XX2444', 12810,1, to_date('23-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9044, 'XX2444', 12810,1, to_date('23-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9045, 'XX2444', 12810,1, to_date('30-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9046, 'XX2444', 12810,1, to_date('30-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9047, 'XX2444', 12810,1, to_date('06-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9048, 'XX2444', 12810,1, to_date('06-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8944, 'XX2444', 12810,1, to_date('22-JAN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8945, 'XX2444', 12810,1, to_date('22-JAN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8946, 'XX2444', 12810,1, to_date('29-JAN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8947, 'XX2444', 12810,1, to_date('29-JAN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8948, 'XX2444', 12810,1, to_date('05-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8949, 'XX2444', 12810,1, to_date('05-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (8950, 'XX2444', 12810,1, to_date('12-FEB-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9527, 'XX2444', 12810,1, to_date('13-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9528, 'XX2444', 12810,1, to_date('13-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (9529, 'XX2444', 12810,1, to_date('13-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6739, 'YY7223', 11093,8, to_date('15-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6740, 'YY7223', 11093,8, to_date('21-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6741, 'YY7223', 11093,8, to_date('22-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6742, 'YY7223', 11093,8, to_date('25-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6743, 'YY7223', 11093,8, to_date('26-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6744, 'YY7223', 11093,8, to_date('27-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6745, 'YY7223', 11093,1, to_date('04-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6746, 'YY7223', 11093,1, to_date('11-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6747, 'YY7223', 11093,1, to_date('18-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6748, 'YY7223', 11093,1, to_date('25-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6749, 'YY7223', 11093,11, to_date('01-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6750, 'YY7223', 11093,11, to_date('15-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (6751, 'YY7223', 11093,10, to_date('01-JUL-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11017, 'YY7223', 11093,1, to_date('07-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11018, 'YY7223', 11093,1, to_date('14-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11019, 'YY7223', 11093,1, to_date('21-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11020, 'YY7223', 11093,1, to_date('28-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11021, 'YY7223', 11093,1, to_date('04-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11022, 'YY7223', 11093,1, to_date('11-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11023, 'YY7223', 11093,1, to_date('18-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11024, 'YY7223', 11093,1, to_date('25-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11025, 'YY7223', 11093,10, to_date('31-MAY-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (11026, 'YY7223', 11093,10, to_date('30-JUN-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13115, 'YY7223', 11093,1, to_date('13-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13201, 'YY7223', 11093,1, to_date('20-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13287, 'YY7223', 11093,1, to_date('27-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13373, 'YY7223', 11093,10, to_date('08-SEP-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13489, 'YY7223', 11093,8, to_date('01-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13490, 'YY7223', 11093,8, to_date('02-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13491, 'YY7223', 11093,8, to_date('03-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13492, 'YY7223', 11093,8, to_date('04-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13493, 'YY7223', 11093,8, to_date('05-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13494, 'YY7223', 11093,8, to_date('06-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13495, 'YY7223', 11093,8, to_date('07-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13496, 'YY7223', 11093,8, to_date('08-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13497, 'YY7223', 11093,8, to_date('09-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13498, 'YY7223', 11093,8, to_date('10-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13499, 'YY7223', 11093,8, to_date('11-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13500, 'YY7223', 11093,8, to_date('12-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13501, 'YY7223', 11093,8, to_date('13-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13502, 'YY7223', 11093,8, to_date('14-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13503, 'YY7223', 11093,8, to_date('15-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13504, 'YY7223', 11093,8, to_date('16-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13505, 'YY7223', 11093,8, to_date('17-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13506, 'YY7223', 11093,8, to_date('18-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13507, 'YY7223', 11093,8, to_date('19-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13508, 'YY7223', 11093,8, to_date('20-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13509, 'YY7223', 11093,8, to_date('21-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13510, 'YY7223', 11093,8, to_date('22-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13511, 'YY7223', 11093,8, to_date('23-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13512, 'YY7223', 11093,8, to_date('24-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13513, 'YY7223', 11093,8, to_date('25-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13514, 'YY7223', 11093,8, to_date('26-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13515, 'YY7223', 11093,8, to_date('27-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13516, 'YY7223', 11093,8, to_date('28-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13517, 'YY7223', 11093,8, to_date('29-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13518, 'YY7223', 11093,8, to_date('30-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13519, 'YY7223', 11093,8, to_date('31-AUG-15','DD-MON-RR'));

  Insert into DTS_FORM_SAMPLE (ID, CLOCK_NUMBER, EMP_ID, REPORT_TYPE, SUB_DATE) values (13030, 'YY7223', 11093,1, to_date('06-AUG-15','DD-MON-RR'));

  --------------------------------------------------------

  -Table DTS_FORM_SAMPLE constraints

  --------------------------------------------------------

  CHANGE ALTER TABLE 'DTS_FORM_SAMPLE' ('ID' ENABLE NOT NULL);

  /

  Or more simple:

  Select emp_id, w.wk, to_char (wk, 'ww') x

  from (select trunc (date ' 2015-01-01' + 7 * (level - 1), 'ww') wk)

  of the double

  connect by level<=>

  ) o

  left outer join

  s dts_form_sample

  by (emp_id) partition

  We trunc (s.sub_date, 'ww') = w.wk

  where sub_date is null

  order to emp_id,

  x

  /

  EMP_ID WK X
  ---------- --------- --
  11093 1ST JANUARY 15 01
  11093 8 JANUARY 15 02
  11093 15 JANUARY 15 03
  11093 22 JANUARY 15 04
  11093 29 JANUARY 15 05
  11093 5 FEBRUARY 15 06
  11093 12 FEBRUARY 15 07
  11093 19 FEBRUARY 15 08
  11093 26 FEBRUARY 15 09
  11093 5 MARCH 15 10
  11093 12 MARCH 15 11

  EMP_ID WK X
  ---------- --------- --
  11093 19 MARCH 15 12
  11093 26 MARCH 15 13
  11093 2 APRIL 15 14
  11093 9 APRIL 15 15
  11093 16 APRIL 15 16
  11093 23 APRIL 15 17
  11093 30 APRIL 15 18
  11093 37 15 - SEP - 10
  17-SEVEN 11093.-15 38
  24-SEVEN 11093.-15 39
  11093 1 OCTOBER 15 40

  EMP_ID WK X
  ---------- --------- --
  11093 8 OCTOBER 15 41
  11093 15 OCTOBER 15 42
  11093 22 OCTOBER 15 43
  11093 29 OCTOBER 15 44
  11093 5 NOVEMBER 15 45
  11093 12 NOVEMBER 15 46
  11093 19 NOVEMBER 15 47
  11093 26 NOVEMBER 15 48
  11093 3 DECEMBER 15 49
  11093 10 DECEMBER 15 50
  11093 17 DECEMBER 15 51

  EMP_ID WK X
  ---------- --------- --
  11093 24 DECEMBER 15 52
  11093 31 DECEMBER 15 53
  12810 1ST JANUARY 15 01
  12810 8 JANUARY 15 02
  12810 15 JANUARY 15 03
  12810 27 AUGUST 15 35
  12810 15 - SEP - 03 36
  12810 37 15 - SEP - 10
  17-SEVEN 12810.-15 38
  24-SEVEN 12810.-15 39
  12810 1 OCTOBER 15 40

  EMP_ID WK X
  ---------- --------- --
  12810 8 OCTOBER 15 41
  12810 15 OCTOBER 15 42
  12810 22 OCTOBER 15 43
  12810 29 OCTOBER 15 44
  12810 5 NOVEMBER 15 45
  12810 12 NOVEMBER 15 46
  12810 19 NOVEMBER 15 47
  12810 26 NOVEMBER 15 48
  12810 3 DECEMBER 15 49
  12810 10 DECEMBER 15 50
  12810 17 DECEMBER 15 51

  EMP_ID WK X
  ---------- --------- --
  12810 24 DECEMBER 15 52
  12810 31 DECEMBER 15 53

  57 selected lines.

  SQL >

  However OP question must answer is start of week date.

  SY.

• Is there a way to get the data for submission of form of eloqua using the REST API?

  I was wondering if there is a way to get the data for submission of form of eloqua using the REST API?

  Thank you

  On the page that egan related, there is a 'RawData' field for FormSubmit activities. In this area, the raw sending the form query string is returned.

  Whatever it is, you can get this info from the activities of the API block, or the endpoints data Rest API.

• How to prevent the Automatic Conversion of TIMESTAMP Format column (0) WITH ZONE VARCHAR2

  Hello

  I created a view of my table and columns with the date format is automatically converted to varchar type...

  How can I avoid this?

  Create view V_T2 as

  Select

  MAX (DECODE (RESULT_TYPE, THE FROM ', DECODE (BACKUP_LEVEL_ID, 'F', LAST_START, NULL), NULL)) LAST_SUCCESS_FULL_START,.

  MAX LAST_SUCCESS_INC_START (DECODE (RESULT_TYPE,' TO DECODE (BACKUP_LEVEL_ID, 'F', NULL, LAST_START), NULL))

  of backup_log;

  the first 'LAST_SUCCESS_FULL_START' column format remains TIMESTAMP (0) WITH ZONE SCHEDULE, but the other changes to VARCHAR.

  the LAST_START column in my table in the source format is also TIMESTAMP (0) WITH ZONE SCHEDULE.

  Thank you for helping me.

  user649075 wrote:

  Create view V_T2 as

  Select

  MAX (DECODE (RESULT_TYPE, THE FROM ', DECODE (BACKUP_LEVEL_ID, 'F', LAST_START, NULL), NULL)) LAST_SUCCESS_FULL_START,.

  MAX LAST_SUCCESS_INC_START (DECODE (RESULT_TYPE,' TO DECODE (BACKUP_LEVEL_ID, 'F', NULL, LAST_START), NULL))

  of backup_log;

  The NULL value is treated as a VARCHAR2 since she does not have a real data type.

  Try to CAST as the appropriate data type.

  cast( null as timestamp(0) with time zone)
  

  MK

• How to preserve date/time the conversion to DNG?

  When to convert a file to DNG in Lightroom, it changes the capture time in the metadata for the date and time, rather than copy the data from the source.  Is there a way in which I can say from my dates alone?

  Normally the DNG conversion transferring metadata from the source file in the DNG format.   It may be that the source file does not have a capture time nested, in which case LR can sometimes become squirrels. The most effective way to solve this:

  --Select a source file that has this problem.

  -Post a screenshot of grid view of library showing what LR thinks, it is the date of capture under the tile.

  -Convert to DNG, but do not delete the original.

  -Download the DNG format and the original to Dropbox (or similar) and post the link here.

  Who must provide all the necessary information to understand what is happening and find a solution.

• Conversion of TIMESTAMP to Date?

  Hi all
  
  I have this little materialized view where I use a session variable to fill.
  
  Say that I've seen like this.
  
  Select date, account, product, sum (balance) in the glbalance if date = "VALUEOF (NQ_SESSION.user_entered_date)" Grouper group by date, account, product
  
  
  Ideally, the SQL should look like: select date, account, product, sum (balance) in the glbalance if date = ' 28 / 02/2013 ' group by date, account, product
  
  
  
  I have a command prompt in the dashboard that fills the variable user_entered_date of query. but I defualted to a SystemDate in the repository.
  
  
  I have a report and this leads to a page of a dashboard. Whenever I open the page, it gives me an error. But when I select a date in the command prompt and run the report, and it works well.
  Its only when I open the page or the dashboard at the start, it is in error as syntax incorecct. I give the example below...
  
  
  The statement that is issued for the view in the present case is
  
  SET the VARIABLE user_entered_date =' TIMESTAMP "2013-02-28 00:00:00"'
  
  If date = "TIMESTAMP" 2013-02-28 00:00:00 "
  I'm not able to remove this word TIMESTAMP that is causing the error. How to do this?
  I have all the date columns in all the tables as DATETIME format only.
  
  
  When to start to choose the date at the COMMAND prompt, then SQL is published as: If date = ' 2013-02-28 00:00:00 ' is correct and properly executed.
  
  
  
  How remove the TIMESTAMP Word when I opened at the start of the dashboard... Any help?

  Current_date as good as sysdate as in Oracle.

  Use this
  SELECT dates.master_date 'DOMAIN' where dates.master_date = current_date

  For error; Difficulty is

  SELECT dates.master_date 'DOMAIN' where dates.master_date = cast (' 28 / 02/2013 ' as date)

  Check if help

  Published by: Srini VIEREN on February 28, 2013 10:49

• problem with implicit to the conversion of the date in oracle

  Next date functions will work fine as long as string confirms for the next model of the date
  
  D MY separator2 R separator1
  
  the separator can be any sign of punctuation (/ $ % & *, ^) sapces, tabs...
  
  as
  Select ADD_MONTHS('21$MAY*2010',2) from DUAL;
  
  SELECT MONTHS_BETWEEN (23 ^ FEB & 2010', ' 11% jan(2011') FROM DUAL;)
  
  the two works perfectly, but it does not work in the ROUND functions (date) and TRUNC (date);
  
  SELECT ROUND('12-FEB-2010') FROM DUAL; -gives error
  
  It needs explicit conversion using TO_DATE();
  
  My question is why what is happening?
  Is it because we have two functions ROUND (NUMBER) and ROUND (DATE)?

  Hello

  Welcome to the forum!

  user650693 wrote:
  Next date functions will work fine as long as string confirms for the next model of the date

  All of the built-in functions will work fine as long as use you them as directed; in particular, pass arguments that have the correct data type. If a function requires a DATE for an argument, always place a DATE, not a VARCHAR2 you hope will be be implicitly converted to DATE.

  D MY separator2 R separator1

  the separator can be any sign of punctuation (/ $ % & *, ^) sapces, tabs...

  This applies to explicitly call the functions where a format string is used, for example, TO_DATE.

  as
  Select ADD_MONTHS('21$MAY*2010',2) from DUAL;

  SELECT MONTHS_BETWEEN ('23 ^ FEB & 2010', ' 11% jan(2011') FROM DUAL;)

  the two works perfectly,

  As the respondent previous said, the two work may , depends on several factors, such as your NLS parameters. It's a very bad habit to rely on such things. The 1st argument to ADD_MONTHS and two arguments to MONTHS_BETWEEN, are supposed to be DATEs, so always call these functions with the DATEs.

  but this does not work in the ROUND functions (date) and TRUNC (date);
  SELECT ROUND('12-FEB-2010') FROM DUAL; -gives error

  It needs explicit conversion using TO_DATE();

  My question is why what is happening?
  Is it because we have two functions ROUND (NUMBER) and ROUND (DATE)?

  No, it's because there is no ROUND function (VARCHAR2).
  The use of strings which are expected of the DATEs is simply asking for trouble. Sometimes, you get what you're asking.

• data form for the opening of the conversion rate

  Hello
  I am trying to create a data form for entry of conversion rates. For example in the given line below, I want to create a data form to convert USD to euro and I want to enter into 1.05742 via the data form. I do not know how to select USD and EUR custom 1 and custom 2 members. where can I see this option?
  
  Actual spending; 2005; January; Periodic report; [None]; [None]; AverageRate; [ICP no]; USD; EUR; [None]; [None]; 1.05742
  
  I'm new to HFM and any help will be appreciated.
  
  
  Thank you

  This looks good to me. C1 will be USD and C2 will be EUR entity will be [none]. Choose USD and EUR in C1 and C2, make sure to change the 'Selector' drop-down list on the form of "currency".

• A design of query for the conversion of time difference in days, hours, Minutes

  Hi all

  A design of query for the conversion of time difference of time in number of days remaining remaining hours minutes and rest in seconds. Made this one till now. Please suggest for all modifications, until now, it seems to work very well, kindly highlight for any anomaly.

  WITH DATA (startDAte, EndDate, Datediff) AS (SELECT to_date ('2015-10-01 10:00:59 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-20-01 03:00:49 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-10-01 10:00','yyyy-dd-mm hh24:mi:ss')-to_date('2015-20-01 03:00','yyyy-dd-mm hh24:mi:ss') FROM dual)

  UNION ALL SELECT to_date ('2015-10-01 10:00:39 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-20-01 03:00:40 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-10-01 10:00','yyyy-dd-mm hh24:mi:ss')-to_date('2015-20-01 03:00','yyyy-dd-mm hh24:mi:ss') FROM dual

  UNION ALL SELECT to_date ('2015-11-01 10:30:45 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-11-01 11:00:50 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-11-01 10:30','yyyy-dd-mm hh24:mi:ss')-to_date ('2015-11-01 11:00 ',' yyyy-mm-dd hh24:mi:ss') FROM dual

  UNION ALL SELECT to_date ('2015-11-01 09:00:50 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-11-01 10:00:59 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-11-01 09:00','yyyy-dd-mm hh24:mi:ss')-to_date ('2015-11-01 10:00 ',' yyyy-mm-dd hh24:mi:ss') FROM dual

  UNION ALL SELECT to_date ('2015-11-01 08:30:49 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-11-01 09:30:59 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-11-01 08:30','yyyy-dd-mm hh24:mi:ss')-to_date('2015-11-01 09:30','yyyy-dd-mm hh24:mi:ss') FROM dual

  )

  Select

  trunc ((EndDate-StartDate)) days.

  trunc (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24) hours)

  trunc (to_number (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24-trunc (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24)) * 60) Minutes,))

  (to_number (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24-trunc (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24)) * 60 - trunc (to_number (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24-trunc (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24)) * 60)) * 60 seconds))))

  data;

  Thanks for the answers in advance.

  AHA!

  TO_TIMESTAMP expects a string as input, so it first makes an implicit conversion from DATE to a string, in the format of NSL_DATE_FORMAT.

  To convert the TIMESTAMP DATE independently NLS_DATE_FORMAT, use

  CAST ( AS TIMESTAMP)

• As of the 31 version, why is there still no option of Thunderbird to insert the date and time in the message that you write?

  As of the 31 version, why is there still no option of Thunderbird to QUICKLY insert the date and time in the message that you write?

  Literally, saw this option very well needed - and opportunity-"promise" for three years now, and even if there are only one or two formats that could be used, at least the option is there.

  It seems that only is to bind a Macro, and the tool to Thunderbird and do it this way.

  Joe Rotello
  [email protected]
  Skype: joerotello

  If the installation of the add-on of TimeStamp is unacceptable for see you if there is a related add-on that you that you already might have managed to convince author to add your function. The Add on more for example has many variables that can enter the body of the message that get automatically replaced with the appropriate data when you merge a message.

• To convert a new Win 8 PC Win XP PC w/Ffx 28.0, is Ffx 28,0 v. keep? If not, then v. and when and where to install the conversion?

  I will be the conversion of my PC for 9 years with the victory. A new PC with Win XP. 8. my list of program control panel tells me that my old PC running Firefox 28.0 (x 86 en - us). I need to be sure that Firefox 28.0 is your latest version and that I should go to my new PC (it seems to be so many versions out there that it is confusing... in one place you say version 17 is the only one to use). If I do not need to install another version of Firefox, I would need to know that one, and that it must be installed on the old computer first, before changing the PC, or anywhere elsewhere in the in the conversion sequence, that is, on the new PC before (or after?) transfer everything from the old PC. I intend to transfer to new PC software free LapLink offered for us the current XP users through a LapLink/Microsoft agreement.

  Yes, Firefox 28 is the current Windows XP or higher version.

  I'm not exactly sure how works of Laplink, but assuming that he transfer all your data from Windows user profile, then you should bring your Firefox to your new computer data. You can confirm by checking here on both computers and comparing what you see:

  (paste into start > run or WinButton + r): %APPDATA%\Mozilla\Firefox\

  In particular, make sure that Laplink copied the profiles.ini file and folder profile and its subfolders.

  I suggest you copy the data in the first, then installation of Firefox. In this case, when you install Firefox it should automatically find your data and you will be running. If you install Firefox first, then you will need to take some additional precautions to get your old data in.