Date of the analysis of issues with TZ?

Similar Questions

• What pins to use to receive the data from the PDS ELITE RS485 with the PXI-8431/2?

  Hello!

  I use the PXI-8431/2 to read data from the flow meter PDS ELITE (Modbus RTU). Receiving data, the RS485 protocol request to terminals 4 and 5, but this configuration does not seem to work. When I connect the RS-485 converter USB of Microflex I get the data correctly, so somehow between the PIN lay and PXI this problem there.

  Can someone help me?

  See you soon,.

  Steven

  Hello Steven,

  I think that what was Hossein trying to send you is the following:

  How to connect and configure a device with RS-485 2-wire

  Can you also tell me a little more what you use to read the data? What environment. You have 2-wire or 4-wire Modbus RTU?

  Kind regards

• The bloody sound issue with XP (DV7-2000 series)

  OK, if someone has managed to get IDT Audio Codec 100% functional under Windows XP?

  100%, I mean:
  -work the three speakers
  -headhones jack sound
  -cut the touch button turns on properly

  It's the box of dirty work, or nothing but box works...

  sp41398 - is the best driver to date (subwoofer does not work, always red button mute). The fate of two speakers and headphones.
  sp43935 - the last driver I could lay my hands on. Subwoofer only doesn't work, no sound from headphone jacks. The mute button is OK.

  The problem is obviously not in the drivers (*.sys, *.dll) themselves, but in the registry settings. Maybe the INF files are also well screwed upward. I tried to install sp43935 and returned to some settings in the registry as sp41398. I managed to make the speakers work with the subwoofer (with kind of a sound distortion at high volume levels, however). So I just replaced all the files *.inf sp43935 with sp41398 of the *.inf files and installed the drivers updated the. They acted exactly as sp41398 drivers, although the file *.sys and *.dll from across sp43935 most recent.

  Then? Any thoghts? Maybe someone has already solved the problem?

  Message edited by firsak 08/09/2009 17:28
  Message edited by firsak 08/09/2009 17:29
  Message edited by firsak 08/09/2009 17:29
  Message edited by firsak 08/09/2009 17:30

  I finally managed to mod the driver for Windows XP, so that it works almost perfectly.

  Indicator LED works properly, its fate of headphones, Speaker Subwoofer seems to work and no hack stupid devcon is required.

  The only problem now is that the IDT Control Panel works correctly. Well, already it did not work at all.

  If there are still users with Windows XP out there who want a better driver, let me know and I'll upload the driver somewhere.

• Form of planning data cut the names of members with "<" or ">" in the name

  We have recently updated to 11.1.2.3.500 (patched to 11.1.2.3.501 Planning) and noticed that on our forms of planning data, it's cut the names of the members so ">" or "<" are in the name of the Member.

  For example, we have the following Member: ' cost-per-minor Suite Tower (< 5K).

  In EPMA, planning, Essbase and financial information, the name of the Member fine poster Dimensions. When we use the Member in a data form, it displays as "cost per minor Suite Tower ()"-it cuts the ' < 'and everything after it. "

  We tried to recreate the shape of data, but it still cut the name of the Member. There is no alias on this member, and we have it just show the name of the Member.

  
  

  If anyone has experienced this before? As much as I know aren't restricted characters, but maybe something with 11.1.2.3.500 coding and the thought those who are part of the tags.

  
  

  Thank you in advance for your help!
  

  We had a similar problem with & in smarlist and patch.502 to be fixed. However, I put in "cost per minor Suite Tower (a member of your).< 5k)"="" in="" the="" .502="" environment="" and="" i="" saw="" the="" same="" issue:="" where="" "cost="" per="" minor="" suite="" turn="">< 5k)"="" cuts="" off="" to="" cost="" per="" minor="" suite="" turn="">

  and I tried just "cost per minor Suite turn."< 5k"="" and="" it="" provided="" this="" cost="" per="" minor="" suite="">

  We also have a 11.1.2.4 environment, I tried this and the question even exsits.  And I guess the only work is about setting out there because that's what they gave us said regarding the & in smarlists.

• Problem using applescript to put data into the table of numbers with column heads

  I have extracted the data from certain Web pages and want to place the data items in a table of numbers.  I wrote the applescript to extract pairs of data into two lists, but encountered a problem when you try to put the data items in a table of numbers.

  I hope I've isolated the problem eventually reduce version of the data table and writing.

  Calendar_Month	Alvarez	Laundry	Linen	Products
  March-2014
  April 2014
  May-2014
  Totals:	0.00	0.00	0.00	0.00

  Define theLabels to {"Alvarez", "Flax", "Laundry", "Products"}

  the nominative value {11, 22, 33, 44}

  Tell application "Numbers."

  say table 1 on sheet 1 of 1

  rowIndex Set of 3

  q Set of 2

  say the line rowIndex

  colHead theLabels point q value

  the columnIndex value address column colHead

  tell the cell (columnIndex)

  value defined in point q of the nominative case

  tell the end

  tell the end

  tell the end

  tell the end

  I arbitrarily chose to line 3 of the table to demonstrate the problem.

  Each data item is associated, due to its position in the list, with a label that determines the column of the data table, where it should be placed.

  The illustrated script pitches the 2nd data element in the list in the column headed "Lin".  This seems to work ok.  But if q is set to 1 the script fails with

  get address of column "Alvarez" in line 3 of table 1 to sheet 1 of the document 1

  -> error number - 1728 column "Alvarez" in line 3 of table 1 of sheet 1 of document 1

  It fails also with q the value 3 or 4.

  I probably did something really stupid, but I can't understand this behavior.  Advice please?

  Under: Numbers v.3.6.1 Script Editor 2.7 2.4 OS X 10.5.5 Applescript

  Two questions.

  (1) the order of the text in theLabels = {"Alvarez", "Flax", "Laundry", "Products"} and differ from the order of the text in the header row. Is this correct?

  (2) you are putting the value 22 (point 2 of nominative) in cell D3, where column heading of D = "Flax", which is article 2 of the theLabels?

  Respect,

  H

• Having the Type Cast issues with FY 2011

  Hi all

  Just to start 2011 with AF in labview and ran through a few examples and I had a pretty good understanding of the functioning of thought.  Ive tried to do a simple on my own now and get error 1448 whenever I launch the joint project.  Basically everything I do is by passing a string message between the vi and followed by reading through an event in the kernel.  Must be failry simple.  IM almost think it of a bug because earlier in the project, I received an error when you try to create a do.vi to override, close the project and reopened, and could then create it.  I see the error in the do.vi of terminal request msg and this typecast should work because I'm down cast class of the actor in senior actor class that inherits from the actor.

  Thanks for any help.

  You must send the right message to the right actor.

  Your message Msg Resquest Terminal cannot send the actor Terminal or a child of the class.

  But in the method of configuration series Port.vi of the actor from Terminal, you send this message to its caller.

  In your program, the appellant of the actor of Terminal is the actor of Diagnostics.

  (The appellant is the one who launched the actor, and as actor of Diagnostics Launches the actor Terminal, the Diagnostics is the appellant for the actor to Terminal)

  What you want to happen in the Port.vi series set?

  You've only made a message for the Diagnostics actor who is will receive, the Terminal result Msg.

• Drag and drop data from the DataGrid to textInput with flex.

  Hello

  Cay please help me on this problem...

  I have a datagid with certain values... I have a textInput on the user interface...

  There is a button '+' on the user interface... when I click on this button, it will add an additional TextInput box UI under the first TextInput... Like thiseverytime when you click on the button '+' it will add a TextInput more UI just below the other...

  Now, I want to drag the values in datagrid to Textinput boxes... User can move two or more raising each textInput on his requirement...

  How do I drag... could help me please out on the question of thi...

  
  I am not able to drag the TextInputs values:

  Here is my code: could someone please help me...

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"width ="100% "height ="100% "creationComplete =" init () "> "

  
  < mx:Script >
  <! [CDATA]
  Import mx.containers.HBox;
  Import mx.controls.Alert;
  Import mx.managers.PopUpManager;
  Import Components.testPopUpWindow;
  Import mx.core.UIComponent;
  Import mx.containers.TitleWindow;
  Import mx.core.DragSource;
  Import mx.core.IUIComponent;
  Import mx.managers.DragManager;
  Import mx.events.DragEvent;
  Import mx.controls.Alert;
  Import mx.controls.Text;
  to import flash.geom.Point;
  
  Import mx.collections.ArrayCollection;
  [Bindable]
  private var dpFlat:ArrayCollection = new ArrayCollection([)
  {JobName: 'A'},
  {JobName: 'B'},
  {JobName: 'C'},
  {JobName: "D"},
  {JobName: 'E'},
  {JobName: 'F'},
  ([{JobName: 'G'}]) ;
  
  private function box_addChild (): void
  {
  
  box: HBox var = new HBox();
  Box.Width = 716;
  var descriptionTextInput:TextInput = new TextInput();
  var strButton:Button = new Button();
  strButton.label = "Submit";
  descriptionTextInput.width = 174;
  descriptionTextInput.height = 58;
  box.addChild (descriptionTextInput);
  / * box.addChild (strButton); */
  strButton.addEventListener (MouseEvent.CLICK, submitButtonClicked);
  interactiveQuestionsVBoxID.addChild (box);
  
  }
  
  public void init (): void
  {
  
  this.addEventListener (DragEvent.DRAG_ENTER, acceptDrop);
  this.addEventListener (DragEvent.DRAG_DROP, handleDrop);
  
  }
  
  public void acceptDrop (dragEvent:DragEvent): void
  {
  If (dragEvent.dragSource.hasFormat ("items"))
  {
  DragManager.showFeedback (DragManager.COPY);
  DragManager.acceptDragDrop (TextInput (dragEvent.currentTarget));
  }
  }
  
  var pt:Point;
  public void handleDrop (dragEvent:DragEvent): void
  {
  var dragInitiator:UIComponent = dragEvent.dragInitiator;
  var dropTarget:UIComponent = dragEvent.currentTarget as UIComponent;
  var table: items = dragEvent.dragSource.dataForFormat("items") in the table;
  / * pt = new Point (dragEvent.localX, dragEvent.localY);
  PT = dragEvent.target.localToContent (pt);
  var img:TextInput = new TextInput();
  IMG.x = dragEvent.localX;   IMG.y = dragEvent.localY;
  IMG.x = PT.x - Number (dragEvent.dragSource.dataForFormat ("mouseX"));
  IMG.y = PT.y - Number (dragEvent.dragSource.dataForFormat ("mouseY"));
  IMG. Width = 50;
  IMG. Height = 50;
  img.setStyle("fontSize",20);     IMG.source = "' Assets / ' + user.user points [0] +".png";"
  IMG. Text = Items [0]. JobName.toString ();
  
  img.buttonMode = true;
  img.mouseChildren = false;
  
  TextInput (event.currentTarget) .text = Arrayitems .label [0];
  
  var itemsArray:Array = event.dragSource.dataForFormat ("items") in the table; */
  TextInput (dragEvent.currentTarget) .text = points [0] .label;
  }
  
  public void beginDrag (mouseEvent:MouseEvent): void
  {
  
  var dragInitiator:TextInput = mouseEvent.currentTarget as TextInput;
  var dragSource:DragSource = new DragSource();
  dsource.addData (this, ' node');
  dragSource.addData (this.mouseX, 'mouseX');
  dragSource.addData (this.mouseY, 'mouseY');
  parent.addChild (dragImg);
  dragSource.addData (mouseEvent.currentTarget.text, "txt");
  try {}
  var dragProxy:TextInput = new TextInput();
  dragProxy.text = mouseEvent.currentTarget.text;
  Alert.Show ("text isss" + dragProxy.text);
  dragProxy.setActualSize (mouseEvent.currentTarget.width, mouseEvent.currentTarget .height)
  
  ask the DragManger to start drag
  DragManager.doDrag (dragInitiator, dragSource, mouseEvent, dragProxy);
  }
  {catch (e)}
  
  }
  
  []] >
  < / mx:Script >
  
  < mx:Canvas id = "c1" width = "100%" height = "100%" y = "10" x = "10" >

  < mx:DataGrid id = dataProvider "d1" = "{dpFlat}" x = "10" y = "119" dragEnabled = "true" dragMoveEnabled = "true" height = "229" width = "176" / >

  <!-< mx:Label id = "lbl" text = "Task name" width = "195" height = "28" x = "0" y = "0" fontWeight = "bold" / >-->
  < mx:Box id = "questionLabelMode" direction = "horizontal" width = '270.5' height = '24' y = "76" x = "211" >
  
  < name mx:Label = "Response" width = "173" text = "Answer" fontWeight = "bold" / >
  < mx:Button label = '+' width = click = "box_addChild ()"70";" "fontWeight ="normal"/ >
  <!-< mx:Button label = ""» width width = "71" fontWeight = "bold" click ="box_deleteChild (); "/ >-->
  < / mx:Box >

  < mx:VBox id = "interactiveQuestionsVBoxID" y = "119" height = "100%" width = "270.5" horizontalScrollPolicy = "off" x = "211" >
  <! - < mx:Box id = 'boxID' direction = "horizontal" width = "268" height = "58" > - >
  < mx:TextInput id = "t1" width = '174' dragDrop = "handleDrop (event)" height = "58" / > "
  <!-< mx:Button label = "Submit" id = "b1" / >-->
  
  <!-< / mx:Box >->
  < / mx:VBox >
  
  < / mx:Canvas >
  < / mx:Application >

  Hi Satya,

  I did it for you... Please copy the sub set of the code and try to run the application. You can see the application works for you.

  You have made two mistakes - you added event on this object listeners... but it refers to the current object (i.e.; your main application file but not TextInput).

  You so need addEventListeners to your textinput "t1" but not this...

  If you add listeners on it then in the functions of your 'acceptDrop' and 'handleDrop' you get 'dragEvent.currentTarget' as your main application but not TextInput (given that you added listeners to "this"). If you addListeners on t1 then its okay.

  Also, you need to add the eventListeners for the newly added text boxes like I did based on 'box_addChild' to the code below.

  Also in the handleDrop function the line of code where you set the text is bad... .it takes the code below...

  TextInput (dragEvent.currentTarget) .text = stock [0]. JobName;

  
  http://www.Adobe.com/2006/mxml"layout ="absolute"width ="100% "height ="100% "creationComplete =" init () ">"
   
    Import mx.containers.HBox;
  Import mx.controls.Alert;
  Import mx.managers.PopUpManager;
  Import Components.testPopUpWindow;
  Import mx.core.UIComponent;
  Import mx.containers.TitleWindow;
  Import mx.core.DragSource;
  Import mx.core.IUIComponent;
  Import mx.managers.DragManager;
  Import mx.events.DragEvent;
  Import mx.controls.Alert;
  Import mx.controls.Text;
  to import flash.geom.Point;
             
                 
     
             
  Import mx.collections.ArrayCollection;
  [Bindable]
  private var dpFlat:ArrayCollection = new ArrayCollection([)
  {JobName: 'A'},
  {JobName: 'B'},
  {JobName: 'C'},
  {JobName: "D"},
  {JobName: 'E'},
  {JobName: 'F'},
  ([{JobName: 'G'}]) ;
               
  private function box_addChild (): void
  {
  box: HBox var = new HBox();
  Box.Width = 716;
  var descriptionTextInput:TextInput = new TextInput();
  var strButton:Button = new Button();
  strButton.label = "Submit";
  descriptionTextInput.width = 174;
  descriptionTextInput.height = 58;
  descriptionTextInput.addEventListener (DragEvent.DRAG_ENTER, acceptDrop);
  descriptionTextInput.addEventListener (DragEvent.DRAG_DROP, handleDrop);
     
  box.addChild (descriptionTextInput);
  / * box.addChild (strButton); */
  strButton.addEventListener (MouseEvent.CLICK, submitButtonClicked);
  interactiveQuestionsVBoxID.addChild (box);
  }
             
  public void init (): void
  {
                
  T1.addEventListener (DragEvent.DRAG_ENTER, acceptDrop);
  T1.addEventListener (DragEvent.DRAG_DROP, handleDrop);
         
  }
     
  public void acceptDrop (dragEvent:DragEvent): void
  {
  If (dragEvent.dragSource.hasFormat ("items"))
  {
  DragManager.showFeedback (DragManager.COPY);
  DragManager.acceptDragDrop (TextInput (dragEvent.currentTarget));
  }
  }
     
  private var pt:Point;
  public void handleDrop (dragEvent:DragEvent): void
  {
  var dragInitiator:UIComponent = dragEvent.dragInitiator;
  var dropTarget:UIComponent = dragEvent.currentTarget as UIComponent;
  var table: items = dragEvent.dragSource.dataForFormat("items") in the table;
  / * pt = new Point (dragEvent.localX, dragEvent.localY);
  PT = dragEvent.target.localToContent (pt);
  var img:TextInput = new TextInput();
  IMG.x = dragEvent.localX;   IMG.y = dragEvent.localY;
  IMG.x = PT.x - Number (dragEvent.dragSource.dataForFormat ("mouseX"));
  IMG.y = PT.y - Number (dragEvent.dragSource.dataForFormat ("mouseY"));
  IMG. Width = 50;
  IMG. Height = 50;
  img.setStyle("fontSize",20);     IMG.source = "' Assets / ' + user.user points [0] +".png";"
  IMG. Text = Items [0]. JobName.toString ();
        
  img.buttonMode = true;
  img.mouseChildren = false;
          
  TextInput (event.currentTarget) .text = Arrayitems .label [0];
          
  var itemsArray:Array = event.dragSource.dataForFormat ("items") in the table; */
  var currTarget: * = dragEvent.currentTarget;
  interactiveQuestionsVBoxID = currTarget.getChildByName ("interactiveQuestionsVBoxID");
  TextInput (dragEvent.currentTarget) .text = stock [0]. JobName;
  }
         
         
  public void beginDrag (mouseEvent:MouseEvent): void
  {
           
  var dragInitiator:TextInput = mouseEvent.currentTarget as TextInput;
  var dragSource:DragSource = new DragSource();
  dsource.addData (this, ' node');
  dragSource.addData (this.mouseX, 'mouseX');
  dragSource.addData (this.mouseY, 'mouseY');
  parent.addChild (dragImg);
  dragSource.addData (mouseEvent.currentTarget.text, "txt");
  try {}
  var dragProxy:TextInput = new TextInput();
  dragProxy.text = mouseEvent.currentTarget.text;
  Alert.Show ("text isss" + dragProxy.text);
  dragProxy.setActualSize (mouseEvent.currentTarget.width, mouseEvent.currentTarget .height)
         
  ask the DragManger to start drag
  DragManager.doDrag (dragInitiator, dragSource, mouseEvent, dragProxy);
  }
  {} catch (error)
     
  }
       
  ]]>
  
     
   
   
       
       
   
   
                          
   
  
  

  If this post answers your question or assistance, please mark it as such.

  Thank you

  Jean Claude Chari

• How to share data in the tables ' User_ * ' with another schema

  I want to share the data in the table WHERE USER_SEGMENTS with another schema. If I create a view and grant select on the view, when the other schema queries the view data are identical to themselves querying the SYS.user_segments table directly.
  

  create view sys_user_segments as select * from sys.user_segments;
  grant select on sys_user_segments to A;

  My guess is that the SYS.user_segments table is a view based on the current user.
  
  Is there a way to share such data without creating a copy of the table?
  
  Oracle: 10g
  
  Thank you

  If the ADMINISTRATOR is concerned about B access to DBA_SEGMENTS (or by creating DBA_SEGMENTS views that belongs to a user who has access on top and then grant access to this view of B), it seems pretty crazy allow that kind of database connection.

  If you create a database link belonged to B that connects to A, B is, in substance, given any privilege that has exercises. But it is done in a very, very dark which will no doubt be neglected in the future when someone gets a check. He'll be sitting here to wait that someone (accidentally or intentionally) Decides to exploit the security hole and do something that is causing a problem (by removing all data from a table, grabbing all the sensitive data in a table, etc.). Risks of this almost certainly far, far* far * outweigh the risks of even leaving B to obtain direct access to DBA_SEGMENTS.

  Justin

• change the date on the imported photos

  I added & appoint my 175 GB of photos by digital date.  My catalogue includes a good number of photos scanned from the "old days".  To save space HARD drive on my iMac, I import photos photos as referenced photos, but they import according to the date of the analysis of the name I had given him and not and when I look at my Photos, analyzed those peaks are scattered everywhere.  I plan to remove all the photos in my pictures and then re-import them.  Is it possible to set the time of creation of an entire folder to reflect when they were actually taken vs when they have been digitized?

  I plan to remove all the photos in my pictures and then re-import them.  Is it possible to set the time of creation of an entire folder to reflect when they were actually taken vs when they have been digitized?

  You can select several photos in pictures for Mac at a time. Then use "Set Date and Time" in the picture menu.

  This setting of the selected photos capture date and time by the same fixed increment change.

  It works well, if the selected photos have been scanned roughly at the same time.  So, choose photos that were analyzed at the same time to adjust.

  If you have a photo album with a variety of scanning of the dates, but want to put all the photos on the same fixed date, use an Apple script. I posted a script in the section user Tip (Photos for Mac) that I use for my scans, see: batch Change Date and time on a fixed Date

• I would like to present the entire pdf document not the xml data in the pdf file.

  Hello

  I have designed a form with some fields asking for details of the client.

  I have provided a "submit" on the PDF button. When the user clicks on submit button after filling in all the necessary details in the form. The submit button calls the servlet class and reads the data from the analysis of xmls pdf file and put in the database table.

  But I want to implement a senario where if the user clicks on the submit button. The full pdf and data inside get saved on the file server or the documentum server. Here, I don't want to read the fields in the form. I want to get and save the entire form.

  Please let me know how to do.

  concerning

  Sunil

  Make sure you use a normal button and set the property to "submit". Then you will see a tab for defining the type of presentation.

  Do not use the built-in submit button.

  Jasmine

• Cannot use the native sequence of database to insert data through the DbAdapter

  Hello

  I use Oracle Fusion Middleware 12.1.3 (selection of pre-designed developer programs for Oracle VM VirtualBox VMs |) Oracle Technology Network). I'm trying to insert data into the Oracle database coming with the device via a DbAdapter. I want to use the native Oracle sequences for primary keys and have configured appropriatelly the DbAdapter. But in execution, I get the following exception:

  Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ('SCOTT'. "ORDERS '." (' ' ID ')

  If I configure the such DbAdapter that do not use sequences, I get the same exception. I'm missing here?

  Kind regards

  Nicolas

  Reading more carefully the exception, in the log file of the server, not just the display of messages in the console of the em, I could note that the ConnectionFactory configured on the outgoing Dbadapter connection used to access the database was incorrect. He was using JavaDb instead of Oracle that I made a mistake of copying and pasting. Correction of this error has resolved the problem.

• I can get the data of a hygrometer using the RS232 port with the following T75.2F:H17.0% using a RS232 data logger format. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  The setting below causes the error. Change for the second selection, output values of all channels.

  

• Problems with the transmission of data between the screws

  Hi all.

  I have a question where my program slows considerably during the race.

  The program is a producer-consumer, where I have the main consumer loops and loops producer for USE comms, measure the output power, input for measuring the power, thermal control, etc..

  Regarding the issue, the measures of output loop takes readings and transmits the data to a separate VI which remains running (measure of output processor). This VI summarizes and on average the data and also displays data for the operator to see details if necessary. The operator shows and hides the front panel of this VI with a button on the main program. This VI also returns the summary data to the main VI, where it is read by my loop of consumer.

  The main measures output VI loop takes about 200mS to run when the program is first started. Less than a minute, it is 400 MS, and it's all downhill from there.

  I've isolated the problem to the way I pass data back (I think). I couldn't find a way to pass the reference of the queue between two screws not connected by wires. I open a reference to the VI processor and use Ctrl Val.Set and Get to pass the data back. If I take the intersection of the Subvi data, there is no slowdown.

  My questions are:

  (1) why the data passing by invoking a node of the control on the target would cause the downturn?

  (2) how would I get/pass information of queue between the two screws are not connected?

  (3) Alternately, could I start the VI processor in my main program, run and pass data in and out of it? I want to keep it running, because it is also part of the user interface.

  I don't know that I have not explained this very clearly. I took some screenshots of my code, but don't see how to download here.

  Thanks in advance,

  Jim

  
  

• chart of increment with the new data to the worksheet

  I'm having a little trouble and could use some help if someone has a moment.  My vi is streaming at 2 Hz data acquisition and adding data in a worksheet open.  I would like to be able to view the data from the worksheet in graphic form, but I don't want to redraw all the data points whenever the worksheet is in graphic form.  I have attached the section from vi which is dealing with this issue.  I have included an incrementer in my loop (+ 0.5 each implimentation) to allow time (for (i = 0) that each data point is collected, so my spreadsheet has essentially 2 columns, one for the time (0, 0.5, 1.0, 1.5, etc.) and a second column of data point recorded.  It all works very well.  It's just the graphical representation that gives me.  Assume that the broken wires are not broken in total vi.  Any ideas on that?

  For anyone interested, we solved this problem by attaching a waveform chart to the table converted out of my acquisition of data and define the history of this table to include the necessary length.  It seems that a waveform graph is not enough, and each parcel will not appear unless the table is horizontally (columns instead of rows for each data point).  Thanks to Jeff at home OR for the help on this one.

  Matt

• The analysis of the data of a string of series

  Alert LabVIEW Express 7

  Sorry, all I have to work with and there is no budget at the moment to upgrade.

  Hello, I am in phase 1 (data transfer reliable to labview) 24/7 of my small Miettinen, who is to display and record data environmental Lab 24/7 our Fisher 02-403 digital barometer that has a serial port. In fact, it came with the software, but no one here seems to like use it so I'll try to find something more intuitive. I can't find any info at all about I/O with this device, so I'm reverse engineering. I'm sure that you cannot write anything to this device only read.

  I started with the connection of the device and the interface with NOR measure and automation and received the following string: P,43,1019,44,31,01,0023.0\r\n.

  I tried to use the Labview 7 Express e/s Companion Instrument, selected 1 COMM, changed the timeout to 5000 (trial and error), added a step reading and analysis, ran and received the following string: P, 43,0999, 44,41, 01,0018.0, XX. After well guess, I determined that the values I have in bold change with the environment and the other 3 are always the same idea 9no what they represent). Alphabetical 1 in bold represents the tendency of climate S sunny = P = C sunny cloudy = etc., the value 2 is the atmospheric pressure in hPa, the 3rd is % relative humidity and the last is the temperature in Deg. C.

  At first, I tried to create simply chips for data I want and operation loop the wizard of e/s in awhile, but often error messages obtained suggesting that I need to define all the tokens in the string. I did it and it worked, then I opened the front panel to access the underlying schemas whence I came with the attached VI. I left this race for more than 24 hours, no error, seems good.

  My question on this forum is, can I simplify this VI losing a part of the analysis of the data that I don't need at this point?

  Please let me know if you can not access this VI maybe I can do a screenshot or something.

  Thank you

  Doug

  Yes, it can be simplified to just a bit.

  

  Since you are new to LabVIEW, you can start with the basic tutorial.