Problems with the transmission of data between the screws

Similar Questions

• Problem with the published parameters between the movement of FCPX

  Hello

  I have a little problem with the settings published between the movement at FCPX.

  For some reason, the published parameters have different values within FCPX in movement.

  For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

  If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

  No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

  MOTION

  

  FINAL CUT X

  

  Thank you.

  The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

  If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

  For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

  To use specific fonts?

  You publish alterations settings?

  Anything out of the ordinary?

• Error - Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Cannot read any DVD.

  Original title: unable to play any DVD

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I tried to update all the drivers but the problem persists

  Hi Neil,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what version of windows Media Player do you use?

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  
  Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• My purchase is that creative cloud is a ° 16034007400 at the date of renewal, there was problems with the credit card, but the tax has been paid in January. So far I can't use the program or any of its components without Adobe me any explanation on why I

  My the purchase is Creative Cloud is a ° 16034007400 at the date of renewal there are problems with the credit card, but the deposit was paid to January. Up to now I can not use the program or one of its components without Adobe me any explanation on why I can not use.
  Why not allow Use Adobe Creative Cloud?

  : Contact support from adobe for hourly pst by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Hi guys, I had a problem with the monthly payment, it is written that my credit card data are no longer available, but my credit card is still valid until the 04.16 I olny a few days to fix this, is there another way to make a payment?... and h

  Hi guys, I had a problem with the monthly payment, it is written that my credit card data are no longer available, but my credit card is still valid until the 04.16 I olny a few days to fix this, is there another way to make a payment?... and how I can do?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• problem with the locking of the data

  Hi all
  
  I'm having a problem with the locking of the data.
  
  When I was trying to lock FY12 real periods. We cannot block periods. The consolidation runs perfect and all entities have the status of OK and all levels of the process are published, but when we try locking... We receive an error that "Consolidation, calculations or translations are required.
  
  Published by: user10926115 on October 16, 2012 10:34

  We had this problem with our application, as well. I don't know what causes it, but I can advise on our solution.

  In your grid lock, change your Value [None] member. Bear has the value and shows that all entities are in a State of OK or OK SC. However, when we go to the [none] member value, we see that some entities still need calculation. Select the groups that aren't in an OK OK SC or ND OK and select 'calculate '. Once solve us this problem in the [None] member value, we have no problems with locking or unlocking of these entities for periods that have been addressed.

  I would like to know if it works for you.

  Also, if someone else may be able to weigh in on the root of this problem, it would be certainly appreciated by more than just the op.

  Thank you!
  Scott

• Problem with the DATA types, in a UNION

  Hello
  I m trying to disply a custom message when no data found using the structure below. Unfortunately I ve you have a problem with the data types I im trying to union
  I tried different types of data in the 2nd SELECTION tool but the rest of the problem. Help, please.
  
  SELECT HOSP_NAME 'HOSPITAL' DOC_SUR 'NAME', 'NAME' DOC_NAME, d.DOC_ID ID, diagnosis
  H., DOCTOR d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1
  
  UNION ALL
  
  SELECT TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), 0
  OF THE DOUBLE
  If NOT EXISTS (HOSP_NAME 'HOSPITAL' 'NAME' 'NAME' DOC_NAME DOC_SUR, d.DOC_ID ID, diagnosis
  OF ΝΟΣΟΚΟΜΕΙΟ h, ΙΑΤΡΟΣ d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1);
  
  
  ORA-01790: expression must have same type of data, matching expression
  01790 00000 - "expression must have the same type of data, matching expression.

  DOC_SUR 'NAME' DOC_NAME 'NAME', ID d.DOC_ID, HOSP_NAME "HOSPITAL", diagnosis

  What is the data type for these columns

  To_char('test'), to_char ('test'), to_char ('test'), to_char ('test'), 0

  What you're doing here 'test' is already a character. Why do you use TO_CHAR?

• problems with the date picker

  I found some problems with the date picker to make my first presentation of object BPM.
  
  I created a group with a datetimestamp it contains. When I click on it in run mode, it will bring a new tab in the browser. This behavior is different from that of a date picker outside a group where there just a small javascript popup.
  
  Anyway around this problem?
  
  Also, would be nice if could be set by default to the current date. is there a way to who?
  
  For the component "time" it seems impossible to define the default value - at least on the tab object structure.
  
  Thank you

  Try to set the property "DHTML" to control date Yes. This option is under the Properties tab-> the calendar section. This will force it to use the popup javascript on screen instead of opening a new browser window/tab.

  To set a default value for a date/time, you can simply set the value in the constructor of the BPM object in which the property is located.

• Problem with the CLOB data type.

  Greetings,
  
  I am facing a problem with the CLOB data type. I know that the CLOB data type is 4 GB (I use Oracle 9i). But in the Pl Sql procedure, I can only store 34305 size for a CLOB variable character data.
  
  This is the test script that I am trying to run.
  
  DECLARE
  -Local variables here*.
  I have INTEGER;
  C_1 CLOB.
  BEGIN
  FOR Rec IN (SELECT
  *
  ACCORDING TO THE TABLE)
  LOOP
  C_1: = c_1 | Rec.Clo_1;
  END LOOP;
  EXCEPTION
  WHILE OTHERS THEN
  Dbms_Output.put_line (SQLERRM);
  END;
  
  
  Here variable C_1 range value 34305 good character regardless of type CLOB. Now the above script fails if query my buckle - huge number of return values. It is throwing the exception "error during transfer of files ORA-06502: PL/SQL: digital error or value."
  
  He would be grateful if someone can help me on this.
  
  Thank you.

  You are probably better off using DBMS_LOB.append, instead of the concatenation of varchar2 (|).

  And... take off your when-other Manager exceptions, please...

• Problems with the date in the procedure on Oracle 11 g

  Hi gurus,
  
  I have some problems with the date under Oracle 11 g format.
  
  Let me explain the situation:
  
  When I start such a request
  Select to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'))
  of sys.dual
  
  I had as a result 2009 under the number.
  
  When I do the same thing in a procedure of a package like this
  
  my_year: = to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'));
  
  the my_year variable contains the value 9 instead of 2009.
  
  Can someone explain to me what goes wrong?
  
  I just tested with the evolution of the variable nls_date_format of environment for the session and the database is complete without success.
  
  Kind regards
  Björn

  Yes, it has everything to do with your environment settings.

  SQL> set serveroutput on;
  SQL>
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01-MAR-98
  
  PL/SQL procedure successfully completed.
  
  SQL> alter session set nls_date_format = 'dd.mm.yyyy hh24:mi:ss'
    2  /
  
  Session altered.
  
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01.03.1998 07:00:00
  
  PL/SQL procedure successfully completed.
  

• Font problem with the publication between Animate and HTML?

  Hello!

  I have a problem with the publication of my animated movie in CC to animate. Some computers don't recognize the font on Google Chrome that I chose in my animation. Firefox never recognize.

  I don't know how to fix.

  Some pictures of the problem:

  -This is the image of Google Chrome with melting Source without Pro. It works normally (on some computers).

  

  -This is on Firefox. The police has not been integrated.

  

  What is going on?

  Thank you!!

  Hello

  You can try to use the type of static text in HTML5 Canvas document for WYSIWYG experience and see if that helps?

  PS: The static text in the document of the canvas is converted to outlines when publishing to preserve the WYSIWYG experience. If you have a requirement that you need to preserve the text in the js to output file, then use a dynamic text with Typekit web font for experience of consistency.

  Thank you!

  Mohan

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards