Date of the project file .xpj never changes

Similar Questions

• Skip (project) to check, because the apk file has not changed.

  Hello all, I get the message 'Skip (project) to check, because the apk file has not been modified' in the error log when I'm checking an Android APK. Since I donot have required a device or a simulator (lack of processor), I'm not able to test the signed .bar file generated by ignoring the message above.

  Please can anyone suggest a solution for the question do face. Thanks in advance.

  Hey there,

  I see something like:

  "Skip ProjetTest to check, because the apk file has not changed."

  in my Console, but not in the error log.

  If it is in the console, it's just a normal journal letting you know that the tools didn't need to check again because the project, including the manifesto, has not changed quite significantly between runs you need to double check.

  Justin

• When I change the main mxml file in the project and then export the swf file does not change, why?

  I have an existing project, years ago that I need to change, I am using Flash Builder 4. When I export the project, it creates a SWF in bin-release, then when I change the code in the mxml project file or files of any format and export the swf file needs to change, but it's not. You have an idea why this might happen?

  Thank you

  I found the problem, there was a SWF into the html-template folder within the project. This has led to substitute the swf of the new generation.

• Modification date in the jpg file properties menu

  My Nikon image download went well, but 4 of the images have the wrong date on them when they were taken.  I think it was off on the camera somehow.  So, when I view it in the Microsoft folder, they are out of use.  Is there a way to change the property case created date on some images in the large folder?

  To change the dates of file or folder, you will need a 3rd party program as freeware "Attribute Changer.
      <>http://www.Softpedia.com/get/system/file-management/attribute-changer.shtml >

  Remember that sometimes the dates of the .jpg files come the EXIF information stored in the .jpg file and you may need some kind of an EXIF Editor to change that.

  HTH,
  JW

• Tool to manage data in the DMP file

  Friends,
  
  We currently have this process:
  
  -Export production data using expdp
  -gzip .dmp file and move it via ftp to test servers
  -import data on the test servers
  
  We are trying to create a process where we can remove all the "sensitive data" test, because our data is highly confidential.
  So, we have already designed a procedure that can remove these data after the import.
  
  BUT my question is: there is some King of oracle tool which can allow us to modify the data in the dmp file, even before you start the import operation?
  
  
  Approx. (Test and Production): Oracle 10 g 2 running under Linux
  
  Thank you

  You can protect your sensitive data after importation in the test environment using datamasking grid control functions.

  Another solution, I've used sometimes is create the trigger for insertion in the test environment a sensitive but important data change is slower.

  HTH
  Antonio NAVARRO

• RTE de LV cannot open the project files that include references .lvlib in dependencies

  I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:

  • Project.Open returns error 7 (file not found)
  
  
  • Project.GetFileLVVersion is a success

  Here are some excerpts from my code of G and C engaged in this behavior:

  

     int openStatus = StatusSuccess;
  
     char * projectVersion = createStringWithLength (VersionStringLength);
  
  printf ("Analysis %s\n", pathchaine);
  
     OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);
  
     printf ("  project written in LabVIEW %s\n", projectVersion);
  If (openStatus is StatusSuccess)
  
     {
  
        printf ("  Open the project file.") \n") ;
  
     }
  
     on the other
  
     {
  
        printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")
  
     }

  However, when running in the development environment, the two methods are successful.

  Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

  Here's how you can reproduce:

  Prerequisites:

  1. LabVIEW 2013 SP1 32-bit
  
  
  2. ConEmu for a good console- https://code.google.com/p/conemu-maximus5/wiki/Downloads
  
  
  3. minGW for compilation of a program to use the LabVIEW - http://sourceforge.net/projects/mingw/files DLL

  reference .lvlib to break dependencies Project.Open in LV RTE

  1. Open the attachment in a temporary directory (e.g. c:\xtra\temp)
  
  
  2. Open "OpenProject.lvproj" in LabVIEW.
  
  
  3. Build 'Open library project'.
  
  
  4. ConEmu with a bash command prompt, navigate to the temporary directory.
  
  
  5. Type make
  
  

  $ make
  
  patch the file "builds/platdefines.h.
  
  GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds

  
  

  6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.
  
  Analysis c:\xtra\temp\OpenProject.lvproj
  
    Project written in LabVIEW 13.0
  
    Open the project file.

  
  

  7. the opinion that both call nodes execute correctly.

  8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.
  
  Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
  
    Project written in LabVIEW 13.0
  
  Error: Could not find the project file or file was not a project file (error code 7).

  
  

  9. notice that the node version managed while the open failure.

  10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

  $ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
  
  -OpenProject.lvproj  kills Nov  4 11:28:28 2014
  
  +++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014
  
  @@-13,7 + 13.11 @.
  
         true
  
         fake
  
         
  
  -      
  
  +      
  
  +          
  
  +              
  
  +          
  
  +      
  
         
  
            
  
               true

  Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:

  1. Open "OpenProject.lvproj" in LabVIEW.
  
  
• Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.


• Select ""leader "Save All (this project)" and use the default name for the new VI.


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.


• Remove the "Application Directory" path of file constant


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Note that the problem has disappeared, as is expected.


• Add the "Application Directory" path of file constant in the block diagram.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.


• Close the new VI and pull out of the project.


• Select ""leader "Save All (this project)"


• Open "OpenProject.lvproj" in a text editor.


• Note that the dependencies item was put away.


• Add VI back to the project.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

• Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

• How to find the path to the project file programmatically

  I'm trying to find a way to get the path to the project file in the development environment.

  I have attached a small project in LV 8.5.1 with a project file, a library file and the VI. I can get the path to the file library, but not to the project. This channel is still .

  I know that the problem exists in LV 8.6.1f1 but I didn't test in LV 2009.

  I am aware that in reality he could there have more nested levels of the library files, but it doesn't matter when this simple example does not work.

  If this is related to the problem I initially created the library by using the file > new... and later, I created the project and added to the library.

  Hi Waldemar,

  Here is a small piece of code and a related link.

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=220269&requireLogin=false

  I hope this helps.

  Kind regards

  N. Ralf

  Engineering applications

  OR Germany

  PS: Don't forget the congratulations. )))))

• Writing data in the CSV file?

  I tried, but in vain, to write data in the CSV file, with the column headers of the file labeled appropriately to each channel as we do in LabView (see attached CSV).  I know that developers should do this same in .net.  Can anyone provide a snippet of code to help me get started?  In addition, maybe there is a completely different way to do the same thing instead of writing directly to the CSV file?  (In fact, I really need to fill a table with data and who join the CSV every seconds of couple).  I have the tables already coded for each channel, but I'm still stuck on how to get it in the CSV file.  I'm coding in VB.net using Visual Studio 2012, Measurement Studio 2013 Standard.  Any help would be greatly appreciated.  Thank you.

  a csv file is nothing more than a text file

  There are many examples on how to write a text using .NET file

• By mistake I deleted an email that I had saved in the project file. Can I recover it or find it?

  Original title: recovery by mistake deleted messages project

  By mistake I deleted an email that I had saved in the project file. Can I recover it or find it?

  Hi Robert,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. what operating system is installed on your computer?

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2. which web e-mail or mail client you are referring to? What is Microsoft Outlook or Hotmail?

  3. who is the provider of mail service?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  If you are referring to Outlook, then you can email deleted restore deleted folder by following the steps in the link below:

  He must restore e-mails deleted in Outlook.com.

  http://Windows.Microsoft.com/en-us/Windows/Outlook/recover-deleted-messages

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I have not set the date on the camera, how do I change the date on the picture

  I have not set the date on the camera, how do I change the date on the picture

  Thank you

  Maybe some help here: http://windows.microsoft.com/en-US/windows-vista/Change-the-date-and-time-a-picture-was-taken

• Emails sent to the project file of their own.

  My emails are automatically saved in the project file while I'm still forming.  I'm so not able to edit my e-mails, unless I go back and erase everything between the error and everywhere where I am in the e-mail when I noticed the error.  It is extremely time consuming.

  What is the trick to fix this?

  SC

  A lot of problems is resolved in the new e-mail application, but you must update your platform to use.  Open the app Store and touch / click on the button "Get Windows 8.1 update".

• First Elements 11. Cannot open the project (file PREL) in point 8.1 of Windows.

  I created the project (file PREL) in the first 11 elements in the Windows 7 Professional environment. I was able to open it without problem.

  Now I have Windows 8.1. When I try to open this project, I have a saying "this file type is not supported, or the required codec is not installed."

  Help!

  Levalt

  Thanks for the reply.

  When you import media source in a first Elements (any version), you are not importing real media. What you have in the media of the project are copies of the originals which are stored in the designated place hard drive. But the project needs to trace these originals to the save location as they were when they were imported in the project. If you move the source media, delete rename them or even that they are in the folder, you will encounter some bad media reconnect issues. At this point, the message "Where is the file...?" that you get when you try to reopen the saved closed project will be a major asset by her reconnects. Alternatively, you can use the function replace images for her reconnects.

  The following links go to the above factors...

  http://help.Adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html

  http://www.atr935.blogspot.com/2013/04/pe11-replace-footage.html

  Troubleshoot damaged projects | Adobe Premiere Elements

  Do not hesitate to ask if you have additional questions on this or need for clarification on what written.

  Best wishes.

  RTA

• I have a pdf file that contains the text if I copy all the text and paste it into Notepad and save the .txt file is it changes the ascii value of the text?

  I have a pdf file that contains the text if I copy all the text and paste it into Notepad and save the .txt file is it changes the ascii value of the text?

  If the encoding is ASCII? Laughing out loud

  Be well...

• How to store the captured data in the csv file

  Here's the sceanario
  
  I was able to capture data from the oracle forms and store it in variables.
  now, I want to store the same data in the csv file and save this csv file.
  quick reply is appreciated.

  Ok. This is what my, admittedly simple, code performs above: var_orderid col1 and col2 in var_quantity.

  See you soon,.
  Jamie

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK