Dates of the Forum

Similar Questions

• How do I see the data of the scale in the oracle forums

  Hi all

  Please can you help how to display the scale data in oracle forums. Here's the requirement, need to display the weight of the scale in the forums oracle, system and the scale is connected by serial port. can you suggest me how to work on it. I won't use any requirement table (I want to say is: scale to table and table to the forums). We use oracle forms 6i.

  Thank you

  HI InoL,

  Thank you very much links you provided was very helpful.  We use ORACLE Forms [32 bit] Version 6.0.8.11.3. Frankly I have no idea how to start from scratch. Im working on it. Please help me later in the discussion. Thank you. We will come back to you with some details. Thank you Mr President.

• How RAC doesn't lose data after a crash of the Forum?

  I am a student at the exam 1Z0-432 (Oracle RAC 12 c Essentials) and I was wondering how RAC loses no data after a crash?

  I see that the data is updated in the Cache buffers (Global Cache), the redo data is written to log buffer, then the redo log files. If each instance has its own wire recovery and undo tablespace how other instances of know these data so immediately after a commit an instance goes down?

  Suppose we have a hardware failure and the scott user updated a line on my racdb2 of the instance and issues a commit, immediately after that the racdb2 instance crashes. Redo data are already in the newspapers of recovery, but not in data files, how the other racdb1 of the Forum know about this update?

  Is there a Buffer any Global redo?

  Kind regards

  Franky

  The reason for newspapers to restore an instance available to all other nodes in CARS.  When one of the instance crashes, surviving instances can access the content instance redolog crashed and apply the changes to recovery.

  http://oracleinaction.com/instance-recovery-RAC/

  http://logicalread.SolarWinds.com/how-Oracle-RAC-redo-and-rollback-are-managed-mc04/#.VaUXqvlViko

• How publish data from the table with some data loss all post in the forum

  I wonder how people are displayed the data in the table or the result of a query with losing them its format from Sqlplus display when they post in the forums of Oracle. I searched on the basis of knowledge of DB but I see no article about it. can you please help me or direct me to this link, I tried different options using code and other tags but nothing has worked, thank you for your help. Thank you.
  
  Edited by: Ariean October 3, 2011 12:34

  You can click on the link to the FAQ at the top right: http://wikis.sun.com/display/Forums/Forums+FAQ.

• When I enter the subject line in the forums, choice of dropsdown FF like google?

  As the subject lines 'knows' Firefox I sent in my yahoomail online and offer then the list drop-down list choice every time I get subject headers in the forums.

  For example, I could ask something on Gardenweb starting with "A".
  for example, say:
  Culture of Apple

  I could then see these choices fall, immediately at the entrance of "A."
  Attn: Dear bro
  strategies anti-cookies
  Attn: Chad re: our recent discussion of the finance

  This has been hard for ages, but never had the time to ask:
  What is everything? and what we call these drop-down lists?

  It reminds me of lists drop-down Google, but still more personal.

  On a tangent (talk way worst intrusion of privacy) more nauseating, it's yahoo mandating the entry of mobile numbers for each new registration by e-mail. It comes to my attention today, because of the distractions of RL. Why is everything always hardly get worse, rather than keep it simple and utilitarian? Not to mention the extreme MAC (I'm electrosensitive, so this is a sensitive topic for me)

  You can use ' history > clear recent history "to delete already backed up the data of the form.

  You turn this feature off in "Options > confidentiality" in order to prevent the registration of new data from Firefox.

  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": "don't forget to search and form history."
  • https://support.Mozilla.org/KB/form+AutoComplete

• 9.1 Safari can not post on the forums

  Hello

  When I try to post on some forums I get messages like "something went wrong please try later."

  When I use another browser (Chrome) it works OK.

  This does not occur on all the forums, but it's annoying when things are not going as I want to use Safari as my browser unique.

  Anyone can shed some light on this?

  Thank you

  Go step by step and test.

  1. click  in the menu bar and select "force quit."

  Select Safari and click "exit of strength at the bottom of the window to Force Quit.

  Hold down the SHIFT key and launch Safari.

  2 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  3. Delete Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  4. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

• Time and date of the Iphone 6s set contacts automatically / backup

  Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

  Two recommendations.

  1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

  Use iPhone

  2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

  I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

  get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

  the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

  manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

  don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.

• Need to retrieve the BONES but do not have the habit of losing data on the HARD drive

  Dear all!

  For long time now, I tried to disable a Trojan horse or a worm, on my Windows XP Home (Home!) i.e. get rid of the cftmon_.exe, when I decided to follow the instructions from Symantec and pieces manually deleted from the register, I guess she was part USERINIT (turn off the system before restore and put on after the deletion).

  It can be as well as I did not right, something after the fact that I have would be to end the session at the time the logon process has started. This is relatively known issue here, with different options.

  -J' need to keep the data on two HARD drives.
  -I have no other partitions.
  -I don't know what I've got on one of them, which I could use to free space Recovery Expert mode.

  a. the fact that I want to take the option with Toshiba, which is Expert mode (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2513&tstart=125) as a last recovery, DVDs on

  b. I have trouble with the installation of the Recovery Console (with Windows XP (Professional!) original CD, 'R' for 'fix), but I would get the message "Setup has not found hard disk units installed in your computer"...
  I understand that I would need to install the driver RAID (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20093&messageID=73758) but I'm afraid that this may delete the data on the disc.

  My questions are the following:

  1 install the RAID driver (downloaded from the Toshiba off site web http://support.toshiba-tro.de/tools/updates/raid-drv/raid-drv-qog20-xp-1380.zip and installed on the floppy drive I guess) so we hope to install the Recovery Console, and do the rest of the work, make data disappear my 2 (remove) HARD drives?

  2. If I use Toshiba Recovery DVD, Expert mode that is finally what is the size of partition should be recorded for the mirror on the half vacuum 1.HDD?, should I partition 2 HDD, after it backup and count data will be lost? Choose any setings special during the process, apart from those mentioned in the link above? What should I do after wards? The registry damaged when you logged in and how can I build? I will be able to use personal and archive data from Microsoft Outlook?

  3. is there a alternative with UBCD4Win and UBCD? What is the best? What is the procedure of after the start of the CD after reboot? How to copy/repair the userinit files?

  I'm sorry for the load of information, but I am pretty stuck. All the necessary data for my normal life are buried here!

  A big thank you JohnnyS, tw, Quad, Eldorado and many others!

  See you soon!

  Hi friend

  I would like to respond on comments like yours, it s a good exercise for my work and my s really cool to have a few topics which will help all the people here.

  JohnnyS is a friend of mine who works with me at our office and we talked a bit about your problem.
  If his opinion is to use the UBCD4Win and work with this option.

  The advice from him were:

  Take a USB - HDD enclosure and put a disk in it and start with UBCD4Win. Copy any important data in a folder on the external HARD drive, then remove the uneeded data on this subject. Only important data!
  Make a backup of your data on the external hard drive for two HDD´s I hope that you have enough free space.

  Format the drive in your machine and get it back. Install the system as usual on your first HARD drive.
  Then put the data anywhere.

  So I don't know if I have it just ask, a little more explanation would be useful. I think that this is a long thread. ;)

  Welcome them

• PhotoSmart e-all-in-one B210a: Incorrect Date for the installation of ink

  I installed new ink cartridges, then print a diagnostic report. The report said that I had installed the cartridges on 15/04/2016, but the date was actually 21/04/2016.  Well, my printer is five days late, but I do not see where to change the date on the calendar on the printer. I logged into the IP address of the printer, but there is nowhere to change the date, either. Clock and calendar on the computer are correct.

  Hi Caesar1948,

  You are welcome!

  It seems not be an option in the settings to change the date and time. However, we can try a semi full reset, which will restore the printer to its factory settings, if you wish. I sent you instructions in a private message. If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope it's useful!

• acquisition of data from the old Spectra via GPIB Analyzer

  Hi, I got an old parser of Spectra (MS2601J, anritsu), I want to get through the GPIB measurement data. I downloaded the driver for MS2601B/K on the site, but it does not work. commands such as "INI" cannot be recognized. I tried the MAX for the finding aid. You can find it, but if I send the command ' * IDN?', no response will not returned. I checked the manual and sent the command "\r\n INI", there also was no answer. I'm new to labview and perhaps I wrong interpret these commands. Does anyone know the format of the MS2601 order and tell me how to get the data of the instrument by GPIB?

  Any suggestion is welcome!

  Hello brileo,

  Normally, you can select the scale X of the chart with the mouse and right click to disable the Auto scale or to access the properties.
  You can also type the range values you want directly on the displayed scale. For example, from 0,0 on the origin.
  But the program of the driver you are using now, replaces the properties of theses (using nodes of property) with the "frequency of reading settings.vi' in the sequence"1"of the"Sweep"case before the display of the data.
  Instead, you can try to use SPAN and signal search SCROLL buttons in the front of the user to select the instrument of the area to see the signal.
   
  For the data to be save in a text file, I advise to use the available examples of LabVIEW.
  You can find them with the HELP menu > find examples... and select in the viewfinder of sample OR:
  Basic principles > Input and Output file > write the text file.vi data

  This example shows how to open or create a text file from a prompt to the user message and write the data to the file.
  You can delete the simulation of data in the schema of loop and call a copy of this program in your pilot AW 2601 B/K Example.vi.
  Do you want to insert the copy of the "Save Sub VI text" you have created in your diagram when it executes the case of' punch' and
  executes the sequence 0 [0.2] to read the data of the spectrum of the output table.

  Hope, which resolves the orientation Data Analyzer. Ask again through the Discussion Forum for other questions.

  Carl

• Whenever I call a VI I get old data with new data in the table

  I selected 'clear indicators when it is called' in my properties VI, execution. Yet, whenever I call the VI, the table of data is growing. My main VI implements my USE, and then call the sub - VI, which sets up an instrument measurements, then reads the results and transmits data. I then change the UUT to the next State and repeat the same task sub - VI to get again the same measures. The main VI changes the mode of WEAR it three times, so call the sub - VI three times. The last call of the Subvi back all three sets of data together, which is OK. My problem is, when the main VI ends and I run another USE, I get the new set of data as well as the complete list of data from the previous run. I found a similar problem answered here on the forum who suggested I should 'clear indicators when it is called', and so I did. It still has not fixed my problem. Any idea?

  Try this, for example:

  

• ActiveX in BradySoft (CodeSoft) - what method/class/object I would use to send data to the form variable to BradySoft?

  Can what method/class/object I use to send data to the form variable to BradySoft? I have a basic configuration of BradySoft label and I want to send it data of variable shape (a serial number) from Labview ActiveX. I joined guide Brady ActiveX programmers, but can't understand what to use for that.

  P.S. I would call Brady or TekLynx tech support on this issue, but they have a strict policy while BradySoft supports ActiveX, but does not provide technical support assistance programming with it. I thought I would try the Forums OR.

  Just an update. I could get this to work myself after a few days of playing with it (I suppose that the best way to learn!). I have attached a sample VI for anyone interested. Can we Kudo ourselves?

• Save the data on the button and then save the data on a spreadsheet on another key.

  Hello

  I am a new user of Labview. I'm developing a Labview 7.1 program that will record data on the keys. Another button, he must stop recording, and then open a file dialog box to save the data stored on a worksheet. I read in this forum that I have run several loops in parallel but unfortunately I can't see the examples because I use an older version of Labview. I tried to do to pass the data in a table, once recording is started, and then I carry the data to write a function that spreadsheet inside an another case statement. However, once I put the writing on the spreadsheet for the case statement he cannot write. I tried to put out the statement box but it save only a single set of data. Sorry if I am not clear with my explanation. It will be greatly appreciated if someone can give me some advice on this.

  Thanks in advance for your information.

  See you soon,.

  Anson

  You want to build a table of data.
  If the Boolean value is true, you will add a data point in the table.

  If it's wrong, you do not add anything, and the loop will be re-iterate.

  In the example below, the same code appears twice.

  Half top shows the case of 'Real' and the bottom half shows the case of 'false '.

  

• Adjust the data in the database with the variables

  Hello

  For my internship, I have an assignment to read and set a database with the variables. This SQL server 2005 database contains variables of a controller. These are read and write variables. The assignment is to display the read variables and the user can adjust the variables of Scripture. The first part was "easy" because the forum contained a lot of examples of this. The second part is more difficult because the forum contains absolutely no example of this. Can I use LabVIEW 2010 and 2011, and also I downloaded the 30 day trial of the database connection tool. If it's useful, I can recommend my company to buy this package. Playback vi makes use of a UDL (Microsoft data link) connection.

  So you guys my question is: is it possible to adjust the specific variables in a database using LabVIEW? And maybe you can give me a little advice on this topic...

  Thanks in advance!

  Roy

  In SQL, the specific data are always selected with the keyword WHERE. In VI to update there is a link for options, you can for example add a constant 'WHERE id = 1457 and measure > 0.54 ".

  You can ofc. also build this chain through controls, settings and other means.

  If you prefer, you can use the Execute Query (under Advanced tab I think) to which you can send the complete query example "TestTable Update set name ="Zeus"where id > 14 and id.<>

  /Y

• two digital to write data to the power file triggers

  Hello

  I am currently building a VI to use two digital front as triggers posted the pic to start and stop writing data to the file.

  When start trigger is activated, the data is written to the file, it goes indefinitely until the stop trigger is on.

  If someone give me some advice, they will be appreciated.

  Hi Jetfire,

  you know the difference between BMP and JPG?

  Size! (And this is the reason why BMP is not allowed in this forum.)

  Just you rename a file does not change the dataformat. Please attach real JPGs (or better yet the PNGs) next time!

  Jetfire created a related thread, now with a VI instead of an image...