DB-> Open method question

Similar Questions

• HttpsConnection.open method is slow for ssl

  Hi all

  I have a question related to the HttpsConnection. Our application wants to use the HttpsConnection class

  to make queries to a server https. Everything is going well, but we have had a few problems with the

  speed. After several readings, we discovered that the problem is with the method of Connector.open (url),

  Sometimes, it takes 8-11 seconds to connect to the server.

  Send/receive data is fast, but the open() method is really slow. Do you have any ideas why this method

  is so slow? Maybe the problem is with the ssl communication protocol took over? This may cause the problem? 3g

  network is fast, there is no problem with that.

  Interestingly, if I do 4 Please each after the other, then reduces the execution time of the open() - from 5 seconds to 1.3 seconds method. If I now wait 40 seconds and make another request, then the open method runs again for 5 to 8 seconds.

  For the URL, I added the EndToEndRequired parameter, and we are going through BIS.

  I'd appreciate any help for this problem.

  Thank you and best regards,

  -Ferenc

  I'm not an expert, but I can confirm that the treatment for a secure connection will be slow, because both ends must agree on a secure channel for the message.  According to the documentation I've read, this can swap between 5 and 8 messages.  If you expect a significant delay in treatment.  Not because of the amount of data, but only because of the latency involved to accommodate and respond to every message.

  Regarding your comment about time for shorted out later, I can only assume that if you open a second connection shortly after the first, the implementation of subsequent session is short.

  I hope this helps.

• How to open a word from a subroutine of javascript document by using the OPEN method?

  Hi everyone and thanks for your support!

  I created a Web site that uses a subroutine in javascript to open a WORD document. This is part of the code that I use in my PC (... and works perfectly).

  I understood from my reading that Microsoft Word is waiting for the absolute path to the file, reason code why you see the text following that, once again,.

  works fine in my PC:

  ***

  obj=w.documents.open('c:\\Users\\Owner\\Desktop\\pitutor314_1\\parent_agrm_sp.docx');

  ***

  But when I download my files (of work) for the server that hosts my website (GoDaddy), I have to change the absolute path in my

  original files to a new path, now showing the absolute path on the server. This is what my subroutine looks like after the

  corrections:

  ***

  obj=w.documents.open('/home/content/43/9663143/HTML/parent_agrm_en.docx');

  ***

  This new path has failed. I tried to change "/" "------" or "-", but these corrections did not work too.

  Please help me to be able to open a Word document of my javascript subroutine residing on my host server. Thanks in advance.

  See you soon

  Pitutor314

  Hi,

  The question you posted would be better suited in the Java programming Forums.

  I would recommend posting your query in the Forums of Java programming.

  https://forums.Oracle.com/Forums/Forum.jspa?forumid=922

  I hope this helps.

• Import / open the question

  Hi, I'm a yosemite with after cc2014

  Mac: ram 24go / 3, 4 GHz intel core i7 / 1 (50% free)

  I have seen question when I use after effect, after a while I couldn't import/open all the files. The finder will not open the window! It starts 2/3 weeks ago

  any help?

  Go you to Yosemite 2-3 weeks ago? If this is not the case, what happened on your computer 2-3 weeks ago? He did an update? Have you installed hardware? Did you install software?

  Or did you simply not use AE on this machine with Yosemite fine until 2-3 weeks ago?

• Open MP question

  Hello

  It's all right, just a question out of curiosity:

  using

  #pragma omp for

  before a for loop specifies that the iterations of the associated loop will be executed in parallel.

  My question: suppose I have a loop with 10000 iterations and two threads will be generated; thread, will be calculated first iterations 5000 while the second begins at 5000 index, it will work on odd/even clues or it is random, or...

  Thank you!

  Hello

  If you do not specify a schedule using the schedule clause, the default value is the static calendar, where the iterations of the loop are divided in almost equal sizes between threads. So in your example, a thread will execute the iterations of the loop 0 - 4999 and the second thread will run iterations 5000 and 9999.  You can still see thread that runs that iteration by something like this:

  #omp parallel for
  for (int i = 0; i < 10000; i++)
     printf ("Iteration %d executed by thread %d", i, omp_get_thread_num())
  

  An identifier, is attributed to each thread in the parallel region with the "master" thread having the id 0. This value is returned by omp_get_thread_num(). In the case above, the 'chunk' size is 5000.  You can change this by specifying the schedule (static, chuncksize) clause:

  #omp parallel for schedule (static, 1000)
  for (int i = 0; i < 10000; i++)
     printf ("Iteration %d executed by thread %d", i, omp_get_thread_num())
  

  Here, each thread will run 1000 iterations of the loop, and then pick up the 'segment' available after 1000 iterations, and so forth until loop all of the iteations are executed.

  You can also specify dynamic and guided schedules that are useful when the iterations of the loop are not load balanced. See section 2.5.1 features of OpenMP 2.5 for more details.

• In Windows 7, prompting the admin password whenever they are open, the questions of program

  I install a program on "Run as Administrator" on a workstation connected to the domain controller, after that installation, whenever we run program requested program user "username and password".

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• BI Publisher opens the question after the new installation

  When I click on start BI Publisher, a prompt in the window opens and closes.  Any help on this is appreciated. It is very urgent.

  Thank you.

  Please follow the steps below.

  Locate the startBIP.bat, it is usually under... Editor of the Edition\bip\bin trial \BI.

  Your windows, click Start, and then type cmd.

  then navigate to the directory where the startBIP.bat. that is the C:\Oracle\BIPublisherTrialEdition\bip\bin\startBIP.bat cd

  The BIPublisher will now begin, and you can access the BI Publisher login screen.

  Hope this will help.

  Thank you

  ~ KKT ~.

• B & W filter causing severe lag & RAW Image grainy after opening (was "Question")

  Hi, 2 problems with Photoshop CC and asked if someone else has had the same problems.

  1. When you enter the B & W filter, I had to wait about 10 minutes for the layer to be called.  In the meantime, I am unable to do anything, the computer is frozen.

  2. for access to a raw file in camera raw, the image is smooth.  However, once the file is open in Photoshop the image becomes very grainy and impossible to work on.   Can clarify you the problem and how to fix it please.

  Would appreciate any help.

  Hi Susan

  Can you tell us what operating system you are using please?

  See also Preferences > Performance and make sure that the levels of Cache is set to a value greater than 1.

• ADF: Session timeout problem using the JavaScript window.open() method

  Hi all
  
  I have a commandImageLink on my page, with partialSubmit = true, clientComponent = true. ClientListener the link calls a JavaScript onClick, the fire with a clientAttribute that contains the URL for the managed bean.
  It works very well - the new window opens successfully. But the performance of any activity on the parent window, the session expires immediately.
  
  The ciLink aims to open the URL in a new window and I can not change this feature.
  
  I've tried (and failed)-
  1. put the ciLink within the tag < h:form > and using target = "_blank".
  2 actionListener on ciLink to JavaScript fire.
  
  I use JDeveloper 11.1.2.1 with weblogic 10.3.6, JSF 2.0.
  
  Thank you
  Yacoub

  Hi Anirban,

  Try to change the session cookie in weblogic.xml, seems to be cleaned each time that you access the external link:

  
    JSESSIONID-MYAPPLICATION
  
  

  AP

• DW CS6 file save and open the Question

  I noticed this glitch in DWCS6 and also Flash CS6, for example, if I crop an image in Photshop and save in a folder, open the folder and see the file inside. Now, I open Dreamwever and go to add the file (which is a jpg file) to an html page. But when I open and navigate to the folder that the file is located in he's not here.

  I tried a few times and have no idea why this is.

  I'm a Lion as mentioned 10.7 DWCS6 running

  any help that slows me down.

  RD

  Permissions of suffocating, resolved!

• Opening project Question

  I got a license of RoboHelp from our company, after that the previous person left and can't with a couple of projects. There are a total of 4 projects, 2 of them were copied in the folder of our group on the network. I copied them to my hard drive and they open fine. The other 2 were associated with another group so these files have been copied to another part of the network. The guy is gone and the files that were on his drive hard drive missing too so I have only these files that are on the network. Anyway, I copied the 2 project files on my hard drive as well and they see being absent from the project folder. They do not have the. XPJ, the. CDP, the. CHM, the. HHC, the. Perfect, or the. HHP files. All they have are Jscripts, HTML pages, XML pages, style sheets CSS, text files, icons, a RoboHHRE.LNG, a webhelp.jar file which gave me a popup that says it was corrupted when I double click on it, and what is called a webhelp .cab file. I downloaded HHP Builder, but when I tried to open the project after building the HHP, RoboHelp file crashed. I made backup before that, I tried. 1 of these projects did not have that much to this topic, so I don't really care that one. The other has dozens of pages on this subject and it is very well developed. Is he the one that concerns me.
  
  I fear I can already know the answer, but I'll ask anyway: to the knowledge of someone, is it possible to recreate these files or create the compiled source files? The documentation is displayed perfectly on the web right now; He just needs updates. Or am I completely screwed and have to start over with a new project?

  Welcome to our community, quarliphia

  Unfortunately, you have some work to do if you do not find the true source. The link below should help you identify the scope.

  Click here to read an article

  See you soon... Rick

• BDB D 4.6 Dbt::get_dlen method Question/problem

  I use a cursor to browse a BDB 4.6 file using:
  
  System::data:DataTable ^ dt;
  mydbfile. Cursor (NULL, & cursorp, 0);
  While (cursorp-> get (and key and data, DB_NEXT) == 0)
  {
  u_int32_t key_len = key.get_dllen (); always get 0
  u_int32_t data_len = data.get_dlen (); still get same 0 if (char *) data.get_data (ptr) valid returns to char string
  String ^ key_str = New String ((char*) key.get_data ());
  String ^ data_str = New String ((char*) data.get_data ());
  DT-> rows-> Add (key_str, data_str);
  }
  
  As the comments code show above, the method get_dllen() always returns zero
  even if a valid ptr returned null end string keys and data.
  So I'm not sure how I read all the data that are present.
  What I am doing wrong?
  Thank you
  Tom Fisher

  Hello

  Is the method get_size() you want to use to return the size of data table? get_dlen() returns the length of the partial record read or written by the application and may not be what you want. Documentation on the handle of the Dbt is to:

  http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/api_reference/cxx/DBT.html

  Thank you
  Sandra

• Method AVDoc Open &amp; Security protected/enhanced mode

  I recently inherited a code which merges two PDF together using OLE automation files.

  I found that the code works with Acrobat X if the security is disabled, but it is unable to open a PDF to a file if the security is enabled (protected mode is set to all files).

  I traced the problem down to the Open method of the class AVDoc. Open always returns 0 even if the file exists.

  This is the behavior expected if protected mode is enabled? Are there alternatives?

  TIA

  Julie

  Yes, this is expected behavior (as described in the documentation for the Acrobat SDK kit for protected mode).

• Looking for a way to programmatically set the visible front part when opens a Subvi

  I'm looking for a way to programmatically set the visible portion of the front panel, when a Subvi opens.  Did not find all the messages that are related, but I do not know how to ask the right question.  To be clear, I want to write a VI assistance programme through a list of subVIs to ensure that background images are all in the same place when to open their respective subVIs.  I hate to play manually with scroll bars before I save each of the screws...  I'm thinking I need to find the top/left of the background image location (know already do) and then to set a property of the VI FP some offset or these values, but I can't find the corresponding property. FP:run - timeposition:custom looked promising, but only affects the location of the window, and not the area of the front panel displays the window.

  I should have added that the idea of using the background image does NOT change the origin.  Therefore, always be close enough, as your controls and indicators won't move, just the image.

  I personally use the OpenG VI and the open method of front panel, when I am in your situation.

• QUESTION OF THE WEEK... Expertise 101__File Type problem! (Xp SP3) _ question: when double clicking on a folder in the search engine database appears and no files appear.

  -problem happens after messing around with 'file types' in 'options folders' BUT the records may not configured properly to correct the open method by setting the 'file type' back to 'open' in the file types.

  QUESTION OF THE WEEK... Expertise 101

  History...

  I saw a tutorial online on how to change the icons of any file (text, folder, programs)
  In addition to the normal way to do it:

  The normal route was right - click folder, text, program or folder etc-> choose Properties > then choose Change icon

  The new way that I learned how to do that was - go to folder options in the control panel > choose the 'file types' tab > find folder icon, click on it > choose Advanced Options > then choose Change icon.

  The reason for me wanting to do other then the normal way is because I would like to point out that all RECORDS USE DIFFERENT TYPE of ICON RATHER THEN DEFAULT UGLY OF THAT folder BROWN ICON that windows XP USES

  the problem starts here... to (go into folder options in Control Panel > choose the 'file types' tab > find folder icon, click on it > choose Advanced Options > then choose Change icon.)

  Note that these are two icon files: the 'Change icon' button is available and highlighted on a launched the Advanced button, but not on the other...

  After messing around with New both of these icons of specific folder "Advanced settings" after closing and the application of the setting.

  What is happening now, it is that each folder I usually double-click thanks to my system all what happens is that the search method appears average while displaying no other files in the folder it self.

  I'm expieranced and you wrote the parameters passed to each "type of file"setting"for this purpose he adjusting back to the past and yet nothing happens...

  THE QUESTION IS >
  How to fix something like that

  &

  How do you get each folder in your system to view another icon rather than UGLY, LOW DOWN DIRTY DUNG COLORFUL FOLDER ICON DEFAULT.

  For the immediate problem:

  Doug Knox fix - http://www.dougknox.com/xp/scripts_desc/xp_folder_open.htm
  Search Companion starts if you double-click a folder or disk - http://windowsxp.mvps.org/searchwindow.htm
  For the desire to have different color records, you will need to use a third party software. Search on Wincustomize.com or similar sites that.
  MS - MVP - Elephant Boy computers - don't panic!