Detection updates Windows in LabVIEW?

Hi, I have an application running on a Windows 7 PC LabVIEW. This gets her famous Windows PC updates every week. I'm looking for an opportunity in LabVIEW to detect the new State of the window after the update of Windows, for example, by reading the OS build number and compare that to the number I've read lately. However, I'm not sure if the OS build number changes after each update of Windows.

Someone faced this problem before? Is there a solution?

Thanks in advance!

Just google the name of the key and you will probably find documents on the Microsoft Web site. And if it's not exactly the key you nedd look in related links until you get the one you want.

Hope that helps

Tags: NI Software

Similar Questions

  • Error database that can be updated windows detected 0x8007000D - not been fixed in Windows 8.

    Original title: slow startup and commissioning, also blocks windows 8

    My computer began to take 10 minutes to start and run. then hangs every now and again when I use it.

    I had problems installing an update and I thought that was the problem, so I followed the instructions and installed the update (KB2855336) on a clean restart. When I put the settings back to normal reboot I see the update succeeded, but the computer is still a good 10 minutes to restart.

    I tried to do a repair, but this is notauto-start.

    I tried to run a sfc/scannow and that froze the verification step 100%, I have waited a long time, checked in the Task Manager and saw that he was inactive and if you click end task.

    My Task Manager shows 99% or 100% use of the disk.

    I tried to do a system restore to a point in mid-July and which failed, error 0x80071a90 code.

    I followed the advice of someone to uninstall the update and restart twice, but the problem persists.

    What can I do to fix this? I use my laptop to work and so I need this problem as soon as possible.

    I just tried in safe mode and also it took forever to start and run. I tried different jumpers in safemode, maintenance of the system not found no problem, windows update however found two:

    Error in database that can be updated windows detected 0x8007000D - not fixed

    Windows Update, the components must be repaired to no fixed

    Help, please!

    Thank you

    Hello

    This problem is usually caused by Windows Update corrupted downloads or installations. However, virus infections are also known to cause this problem. Before scanning for viruses, please try these troubleshooting steps and check whether the problem is resolved:

    Method 1: reset the Windows Update components and check if the error persists:

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058/en-us

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    Method 2: use Deployment Image Servicing and Management to fix Windows Update errors.

    To do this, follow these steps:

    a. press the Windows key + C and type cmd in the Search box.

    b. right-click on command prompt and select run as administrator.

    c. type these commands and press enter after each:

    DISM.exe / Online/Cleanup-image /Scanhealth

    DISM.exe / Online/Cleanup-image /Restorehealth

    d. close the command prompt, and then run Windows Update again.

    Please get back to us with the State of the question.

  • Problem updating Windows on Hp EliteBook 8560w - HP ProtectTools Security Manager 8.1

    When I ' try to update Windows 8 Preview of Windows 8.1 on a laptop HP EliteBook 8560w, I ' am getting this error message: "before upgrade you to Windows 8.1 Preview, uninstall these apps: HP ProtectTools Security manager, HP WebCam.

    Hp ProtectTools 8.0.2.1341 Security Manager is installed with the password manager and Credential Manager.

    Someone had this problem and fixed it yet?

    Thank ' s!

    Hello!
    Thanks for posting in the HP support forum!

    8.1 Microsoft Windows (although very good and big update ) is still in BETA (testing) phase and is not officially supported.

    Windows has features upgrade analysis and that it has detected that HP ProtectTools are not (yet) compatible with the new operating system (new update) - still in test.

    Note that this OS is still in beta and may contain bugs. In addition, he brings a few changes that any other 3rd party suppliers must take into account and it will take a while until the program is compatible.

    I recommend - if you want to test the new operating system, install fresh on another computer to test (processing Edition), not a production machine. Otherwise, for your laptops of business - use only the final versions of the software (such as Windows 7 SP1 or Windows 8).

    Let me know if I can help you further!

    IT_WinSec

    Please, take into consideration my location (Europe) and time zones. I'll try to give the answer as soon as possible.

  • updated Windows vista sp 2 KB948465 fails with the error code 80070057

    the Sp 2 update will not work under windows update or standalone download.  the preparation of updated system ran with the following result:

    =================================
    Preparation of control system was updated.
    Version 6.0.6001.22275
    2009-11-04 17:31

    Checking deployment Packages

    Audit of manifest Package and catalogs.

    Checking package watchlist.

    Control of component watchlist.

    Verification of the packets.

    Control components store

    Checking SMI Store
    Summary:
    Milliseconds: 2514738
    No error detected

    and the file sfcresults contained the following text:
    2009-11-04 19:35:23, info CSI 00000006 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:35:23, transaction Info CSI 00000007 [SR] beginning verify and repair
    2009-11-04 19:35:33, info CSI 00000009 [SR] full audit
    2009-11-04 19:35:34, CSI of information 0000000 components [SR] a check 100 (0 x 00000064)
    2009-11-04 19:35:34, CSI Info 0000000b transaction [SR] beginning verify and repair
    2009-11-04 19:35:43, CSI to 0000000 d [SR] full audit information
    2009-11-04 19:35:44, CSI 0000000e Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:35:44, CSI Info 0000000f transaction [SR] beginning verify and repair
    2009-11-04 19:35:46, info CSI 00000011 [SR] full audit
    2009-11-04 19:35:46, info CSI 00000012 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:35:46, transaction Info CSI 00000013 [SR] beginning verify and repair
    2009-11-04 19:35:48, info CSI 00000015 [SR] full audit
    2009-11-04 19:35:49, info CSI 00000016 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:35:49, transaction Info CSI 00000017 [SR] beginning verify and repair
    2009-11-04 19:35:51, info CSI 00000019 [SR] full audit
    2009-11-04 19:35:51, CSI Info 0000001 components [SR] a check 100 (0 x 00000064)
    2009-11-04 19:35:51, CSI Info 0000001 b transaction [SR] beginning verify and repair
    2009-11-04 19:35:53, CSI Info 0000001 d [SR] full audit
    2009-11-04 19:35:54, 0000001e Info [SR] CSI components check 100 (0 x 00000064)
    2009-11-04 19:35:54, CSI Info 0000001f transaction [SR] beginning verify and repair
    2009-11-04 19:35:56, info CSI 00000021 [SR] full audit
    2009-11-04 19:35:56, info CSI 00000022 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:35:56, transaction Info CSI 00000023 [SR] beginning verify and repair
    2009-11-04 19:35:58, info CSI 00000025 [SR] full audit
    2009-11-04 19:35:58, info CSI 00000026 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:35:58, transaction Info CSI 00000027 [SR] beginning verify and repair
    2009-11-04 19:36, info CSI 00000029 [SR] full audit
    2009-11-04 19:36, CSI Info 0000002 components [SR] a check 100 (0 x 00000064)
    2009-11-04 19:36, CSI Info 0000002b transaction [SR] beginning verify and repair
    2009-11-04 19:36:02, info CSI 0000002d [SR] full audit
    2009-11-04 19:36:03, CSI [SR] 0000002e Info components check 100 (0 x 00000064)
    2009-11-04 19:36:03, CSI Info 0000002f transaction [SR] beginning verify and repair
    2009-11-04 19:36:04, info CSI 00000031 [SR] full audit
    2009-11-04 19:36:05, info CSI 00000032 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:36:05, the transaction Info CSI 00000033 [SR] beginning verify and repair
    2009-11-04 19:36:06, info CSI 00000035 [SR] full audit
    2009-11-04 19:36:07, info CSI 00000036 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:36:07, transaction Info CSI 00000037 [SR] beginning verify and repair
    2009-11-04 19:36:09, info CSI 00000039 [SR] full audit
    2009-11-04 19:36:10, CSI Info 0000003 components [SR] a check 100 (0 x 00000064)
    2009-11-04 19:36:10, CSI Info 0000003b transaction [SR] beginning verify and repair
    2009-11-04 19:36:11, info CSI 0000003d [SR] full audit
    2009-11-04 19:36:12, CSI 0000003e [SR] Info components check 100 (0 x 00000064)
    2009-11-04 19:36:12, CSI Info 0000003f transaction [SR] beginning verify and repair
    2009-11-04 19:36:13, info CSI 00000041 [SR] full audit
    2009-11-04 19:36:14, info CSI 00000042 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:36:14, transaction Info CSI 00000043 [SR] beginning verify and repair
    2009-11-04 19:36:18, Info CSI 00000045 [SR] check complete
    2009-11-04 19:36:18, 00000046 CSI info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:36:18, transaction Info CSI 00000047 [SR] beginning verify and repair
    2009-11-04 19:36:20, Info CSI 00000049 [SR] check complete
    2009-11-04 19:36:20, CSI Info 0000004 components [SR] a check 100 (0 x 00000064)
    2009-11-04 19:36:20, CSI Info 0000004b transaction [SR] beginning verify and repair
    2009-11-04 19:36:23, CSI Info 0000004 d [SR] full audit
    2009-11-04 19:36:24, CSI 0000004e [SR] Info components check 100 (0 x 00000064)
    2009-11-04 19:36:24, CSI Info 0000004f transaction [SR] beginning verify and repair
    2009-11-04 19:36:27, info CSI 00000051 [SR] full audit
    2009-11-04 19:36:27, info CSI 00000052 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:36:27, transaction Info CSI 00000053 [SR] beginning verify and repair
    2009-11-04 19:36:29, info CSI 00000055 [SR] full audit
    2009-11-04 19:36:29, info CSI 00000056 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:36:29, transaction Info CSI 00000057 [SR] beginning verify and repair
    2009-11-04 19:36:34, Info CSI 00000059 [SR] full check
    2009-11-04 19:36:34, CSI 0000005 components [SR] a Info check 100 (0 x 00000064)
    2009-11-04 19:36:34, CSI Info 0000005b transaction [SR] beginning verify and repair
    2009-11-04 19:36:36, CSI Info 0000005 d [SR] full audit
    2009-11-04 19:36:37, CSI 0000005e [SR] Info components check 100 (0 x 00000064)
    2009-11-04 19:36:37, CSI Info 0000005f transaction [SR] beginning verify and repair
    2009-11-04 19:36:39, info CSI 00000061 [SR] full audit
    2009-11-04 19:36:39, 00000062 CSI info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:36:39, transaction Info CSI 00000063 [SR] beginning verify and repair
    2009-11-04 19:36:51, info CSI 00000065 [SR] full audit
    2009-11-04 19:36:51, info CSI 00000066 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:36:51, transaction Info CSI 00000067 [SR] beginning verify and repair
    2009-11-04 19:36:59, info CSI 00000069 [SR] full audit
    2009-11-04 19:36:59, CSI Info 0000006 components [SR] a check 100 (0 x 00000064)
    2009-11-04 19:36:59, CSI Info 0000006b transaction [SR] beginning verify and repair
    2009-11-04 19:37:08, Info CSI 0000006e Verify [SR] full
    2009-11-04 19:37:08, CSI Info 0000006f [SR] components check 100 (0 x 00000064)
    2009-11-04 19:37:08, transaction Info CSI 00000070 [SR] beginning verify and repair
    2009-11-04 19:37:17, info CSI 00000073 [SR] full audit
    2009-11-04 19:37:17, info CSI 00000074 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:37:17, transaction Info CSI 00000075 [SR] beginning verify and repair
    2009-11-04 19:37:29, info CSI 00000077 [SR] full audit
    2009-11-04 19:37:30, info CSI 00000078 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:37:30, transaction Info CSI 00000079 [SR] beginning verify and repair
    2009-11-04 19:37:39, CSI Info 0000007 d [SR] full audit
    2009-11-04 19:37:40, CSI 0000007e Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:37:40, CSI Info 0000007f transaction [SR] beginning verify and repair
    2009-11-04 19:37:50, info CSI 00000087 [SR] full audit
    2009-11-04 19:37:51, info CSI 00000088 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:37:51, transaction Info CSI 00000089 [SR] beginning verify and repair
    2009-11-04 19:38, CSI Info 0000008b Verify [SR] full
    2009-11-04 19:38, components of CSI Info 0000008 c [SR] 100 audit (0 x 00000064)
    2009-11-04 19:38, Info CSI 0000008 d [SR] beginning verify and repair transaction
    2009-11-04 19:38:08, CSI 0000008f [SR] Verify Info full
    2009-11-04 19:38:08, info CSI 00000090 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:38:08, transaction Info CSI 00000091 [SR] beginning verify and repair
    2009-11-04 19:38:19, Info CSI 00000093 [SR] check complete
    2009-11-04 19:38:20, info CSI 00000094 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:38:20, transaction Info CSI 00000095 [SR] beginning verify and repair
    2009-11-04 19:38:33, info CSI 00000097 [SR] full audit
    2009-11-04 19:38:33, info CSI 00000098 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:38:33, transaction Info CSI 00000099 [SR] beginning verify and repair
    2009-11-04 19:38:39, CSI Info 0000009b [SR] cannot repair the military record [l:20 {10}] "angsaz.ttf" Microsoft-Windows-font-TrueType-AngsanaNew, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    "2009-11-04 19:38:43, Info CSI 0000009 c [SR] fixed queue \SystemRoot\WinSxS\Manifests\\[l:20{10}]"angsaz.ttf "by copying from backup
    2009-11-04 19:38:43, CSI Info 0000009 d [SR] repair corrupted file [ml:520 {260}, l:40 {20}] '------? \C:\Windows\Fonts"\[l:20{10}]"angsaz.ttf' of the store
    2009-11-04 19:38:47, a 000000, 1 CSI Info [SR] verification complete
    2009-11-04 19:38:47, 000000 a 2 CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:38:47, CSI Info a 000000 3 transaction [SR] beginning verify and repair
    2009-11-04 19:39:07, 000000 to 5 CSI Info [SR] verification complete
    2009-11-04 19:39:07, 000000 a 6 CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:39:07, CSI Info 000000a 7 transaction [SR] beginning verify and repair
    2009-11-04 19:39:27, a 000000, 9 CSI Info [SR] verification complete
    2009-11-04 19:39:28, 000000aa CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:39:28, CSI Info 000000ab transaction [SR] beginning verify and repair
    2009-11-04 19:39:33, 000000ad CSI Info [SR] verification complete
    2009-11-04 19:39:34, 000000ae CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:39:34, CSI Info 000000af transaction [SR] beginning verify and repair
    2009-11-04 19:39:38, 000000 b 1 CSI Info [SR] verification complete
    2009-11-04 19:39:38, 000000 b 2 CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:39:38, CSI Info 000000b 3 transaction [SR] beginning verify and repair
    2009-11-04 19:39:39, 000000 b 5 CSI Info [SR] cannot repair the military record [l:22 {11}] "Stknote.h1s" Microsoft-Windows-help - Stknote.Resources, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2009-11-04 19:39:43, 000000 b 7 CSI Info [SR] cannot repair the military record [l:22 {11}] "Stknote.h1s" Microsoft-Windows-help - Stknote.Resources, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2009-11-04 19:39:43, 000000 b 8 CSI Info [SR] this element is referenced by [l:166 {83}] "' Package_36_for_KB937286 ~ 31bf3856ad364e35 ~ x 86 ~ US ~ 6.0.1.18000.937286 - 100_en-us_GDR" "
    2009-11-04 19:39:43, 000000ba CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:66 {33}] '------? \C:\Windows\Help\Windows\en-us"\[l:22{11}]"Stknote.H1S '; source file in the store is also corrupted
    2009-11-04 19:39:43, 000000bc CSI Info [SR] verification complete
    2009-11-04 19:39:43, 000000bd CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:39:43, 000000be CSI Info transaction [SR] beginning verify and repair
    2009-11-04 19:40:01, CSI Info 000000dc Verify [SR] full
    2009-11-04 19:40:01, 000000dd CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:40:01, CSI Info 000000de transaction [SR] beginning verify and repair
    2009-11-04 19:40:04, 000000e0 CSI Info [SR] verification complete
    2009-11-04 19:40:05, Info CSI [SR] 000000e1 components check 100 (0 x 00000064)
    2009-11-04 19:40:05, CSI Info 000000e2 transaction [SR] beginning verify and repair
    2009-11-04 19:40:13, CSI Info 000000e4 Verify [SR] full
    2009-11-04 19:40:14, 000000e5 CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:40:14, 000000e6 CSI Info transaction [SR] beginning verify and repair
    2009-11-04 19:40:21, 000000e8 CSI Info [SR] verification complete
    2009-11-04 19:40:22, 000000e9 CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:40:22, 000000ea CSI Info transaction [SR] beginning verify and repair
    2009-11-04 19:40:33, 000000ec CSI Info [SR] verification complete
    2009-11-04 19:40:34, 000000ed CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:40:34, Info CSI 000000ee transaction [SR] beginning verify and repair
    2009-11-04 19:40:47, 000000f1 CSI Info [SR] verification complete
    2009-11-04 19:40:47, 000000f2 CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:40:47, CSI Info 000000f3 transaction [SR] beginning verify and repair
    2009-11-04 19:40:51, 000000f5 CSI Info [SR] verification complete
    2009-11-04 19:40:52, 000000f6 CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:40:52, 000000f7 CSI Info transaction [SR] beginning verify and repair
    2009-11-04 19:41:07, 000000f9 CSI Info [SR] verification complete
    2009-11-04 19:41:08, 000000fa CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:41:08, CSI Info 000000fb transaction [SR] beginning verify and repair
    2009-11-04 19:41:16, 000000fd CSI Info [SR] verification complete
    2009-11-04 19:41:16, CSI Info [SR] 000000fe components check 100 (0 x 00000064)
    2009-11-04 19:41:16, CSI Info 000000ff transaction [SR] beginning verify and repair
    2009-11-04 19:41:25, info CSI 00000101 [SR] full audit
    2009-11-04 19:41:26, info CSI 00000102 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:41:26, transaction Info CSI 00000103 [SR] beginning verify and repair
    2009-11-04 19:41:43, info CSI 00000128 [SR] full audit
    2009-11-04 19:41:44, info CSI 00000129 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:41:44, CSI Info 0000012a transaction [SR] beginning verify and repair
    2009-11-04 19:42:01, CSI Info 0000012 c [SR] full audit
    2009-11-04 19:42:01, info CSI 0000012d [SR] components check 100 (0 x 00000064)
    2009-11-04 19:42:01, Info CSI 0000012e transaction [SR] beginning verify and repair
    2009-11-04 19:42:30, info CSI 00000130 [SR] full audit
    2009-11-04 19:42:30, info CSI 00000131 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:42:30, transaction Info CSI 00000132 [SR] beginning verify and repair
    2009-11-04 19:42:54, info CSI 00000134 [SR] full audit
    2009-11-04 19:42:55, info CSI 00000135 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:42:55, transaction Info CSI 00000136 [SR] beginning verify and repair
    2009-11-04 19:43:07, info CSI 00000138 [SR] full audit
    2009-11-04 19:43:08, info CSI 00000139 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:43:08, CSI Info 0000013a transaction [SR] beginning verify and repair
    2009-11-04 19:43:18, CSI Info 0000013 c [SR] full check
    2009-11-04 19:43:18, 0000013d of CSI Info [SR] components check 100 (0 x 00000064)
    2009-11-04 19:43:18, Info CSI 0000013e transaction [SR] beginning verify and repair
    2009-11-04 19:43:26, info CSI 00000140 [SR] full audit
    2009-11-04 19:43:26, info CSI 00000141 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:43:26, transaction Info CSI 00000142 [SR] beginning verify and repair
    2009-11-04 19:43:34, Info CSI 00000145 [SR] full check
    2009-11-04 19:43:34, Info CSI 00000146 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:43:34, transaction Info CSI 00000147 [SR] beginning verify and repair
    2009-11-04 19:43:56, info CSI 00000149 [SR] full audit
    2009-11-04 19:43:57, CSI Info 0000014 components [SR] a check 100 (0 x 00000064)
    2009-11-04 19:43:57, CSI Info 0000014b transaction [SR] beginning verify and repair
    2009-11-04 19:44:07, CSI Info 0000014 d [SR] full audit
    2009-11-04 19:44:07, CSI 0000014e [SR] Info components check 100 (0 x 00000064)
    2009-11-04 19:44:07, CSI Info 0000014f transaction [SR] beginning verify and repair
    2009-11-04 19:44:23, info CSI 00000151 [SR] full audit
    2009-11-04 19:44:23, info CSI 00000152 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:44:23, transaction Info CSI 00000153 [SR] beginning verify and repair
    2009-11-04 19:44:39, info CSI 00000155 [SR] full audit
    2009-11-04 19:44:40, info CSI 00000156 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:44:40, transaction Info CSI 00000157 [SR] beginning verify and repair
    2009-11-04 19:44:50, info CSI 00000159 [SR] full audit
    2009-11-04 19:44:51, CSI Info 0000015 components [SR] a check 100 (0 x 00000064)
    2009-11-04 19:44:51, CSI Info 0000015b transaction [SR] beginning verify and repair
    2009-11-04 19:45:04, CSI Info 0000015 d [SR] full audit
    2009-11-04 19:45:05, CSI 0000015e [SR] Info components check 100 (0 x 00000064)
    2009-11-04 19:45:05, CSI Info 0000015f transaction [SR] beginning verify and repair
    2009-11-04 19:45:24, Info CSI 00000162 [SR] check complete
    2009-11-04 19:45:24, CSI Info [SR] 00000163 components check 100 (0 x 00000064)
    2009-11-04 19:45:24, transaction Info CSI 00000164 [SR] beginning verify and repair
    2009-11-04 19:45:32, info CSI 00000166 [SR] full audit
    2009-11-04 19:45:32, info CSI 00000167 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:45:32, transaction Info CSI 00000168 [SR] beginning verify and repair
    2009-11-04 19:45:44, CSI Info 0000016a Verify [SR] full
    2009-11-04 19:45:44, CSI Info 0000016 components [SR] b check 100 (0 x 00000064)
    2009-11-04 19:45:44, CSI Info 0000016 c [SR] beginning verify and repair operation
    2009-11-04 19:45:55, Info CSI 0000016e [SR] full Verify
    2009-11-04 19:45:56, CSI 0000016f [SR] components Info check 100 (0 x 00000064)
    2009-11-04 19:45:56, transaction Info CSI 00000170 [SR] beginning verify and repair
    2009-11-04 19:46:08, info CSI 00000172 [SR] full audit
    2009-11-04 19:46:08, info CSI 00000173 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:46:08, transaction Info CSI 00000174 [SR] beginning verify and repair
    2009-11-04 19:46:23, info CSI 00000176 [SR] full audit
    2009-11-04 19:46:24, CSI Info [SR] 00000177 components check 100 (0 x 00000064)
    2009-11-04 19:46:24, transaction Info CSI 00000178 [SR] beginning verify and repair
    2009-11-04 19:46:29, CSI Info 0000017a Verify [SR] full
    2009-11-04 19:46:29, CSI Info 0000017 components [SR] b check 100 (0 x 00000064)
    2009-11-04 19:46:29, CSI Info 0000017 c [SR] beginning verify and repair operation
    2009-11-04 19:46:40, Info CSI 0000017e [SR] full Verify
    2009-11-04 19:46:40, CSI 0000017f [SR] components Info check 100 (0 x 00000064)
    2009-11-04 19:46:40, transaction Info CSI 00000180 [SR] beginning verify and repair
    2009-11-04 19:46:52, info CSI 00000182 [SR] full audit
    2009-11-04 19:46:53, info CSI 00000183 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:46:53, transaction Info CSI 00000184 [SR] beginning verify and repair
    2009-11-04 19:47:04, info CSI 00000186 [SR] full audit
    2009-11-04 19:47:04, info CSI 00000187 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:47:04, transaction Info CSI 00000188 [SR] beginning verify and repair
    2009-11-04 19:47:23, CSI Info 0000018a Verify [SR] full
    2009-11-04 19:47:24, CSI Info 0000018 [SR] b components check 100 (0 x 00000064)
    2009-11-04 19:47:24, CSI Info 0000018 c [SR] beginning verify and repair operation
    2009-11-04 19:47:52, Info CSI 0000018e [SR] full Verify
    2009-11-04 19:47:52, CSI 0000018f [SR] components Info check 100 (0 x 00000064)
    2009-11-04 19:47:52, transaction Info CSI 00000190 [SR] beginning verify and repair
    2009-11-04 19:48:01, info CSI 00000192 [SR] full audit
    2009-11-04 19:48:02, info CSI 00000193 [SR] components check 100 (0 x 00000064)
    2009-11-04 19:48:02, transaction Info CSI 00000194 [SR] beginning verify and repair
    2009-11-04 19:48:14, CSI 0000019f [SR] Verify Info full
    2009-11-04 19:48:14, 000001 has 0 CSI Info [SR] components check 44 (0x0000002c)
    2009-11-04 19:48:14, 000001 has 1 CSI Info transaction [SR] beginning verify and repair
    2009-11-04 19:48:18, 000001 has 3 CSI Info [SR] full audit
    2009-11-04 19:48:18, 000001 has 4 CSI Info [SR] repair 2 components
    2009-11-04 19:48:18, 000001 has 5 CSI Info transaction [SR] beginning verify and repair
    2009-11-04 19:48:18, 000001 has 7 CSI Info [SR] cannot repair the military record [l:20 {10}] "angsaz.ttf" Microsoft-Windows-font-TrueType-AngsanaNew, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2009-11-04 19:48:18, 000001 has 9 CSI Info [SR] cannot repair the military record [l:22 {11}] "Stknote.h1s" Microsoft-Windows-help - Stknote.Resources, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2009-11-04 19:48:18, 000001aa CSI repaired Info [SR] file \SystemRoot\WinSxS\Manifests\\[l:20{10}]"angsaz.ttf" by copying from backup
    2009-11-04 19:48:18, 000001ab CSI Info [SR] repair corrupted file [ml:520 {260}, l:40 {20}] '------? \C:\Windows\Fonts"\[l:20{10}]"angsaz.ttf' of the store
    2009-11-04 19:48:18, 000001ad CSI Info [SR] cannot repair the military record [l:22 {11}] "Stknote.h1s" Microsoft-Windows-help - Stknote.Resources, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2009-11-04 19:48:18, 000001ae CSI Info [SR] this element is referenced by [l:166 {83}] "' Package_36_for_KB937286 ~ 31bf3856ad364e35 ~ x 86 ~ US ~ 6.0.1.18000.937286 - 100_en-us_GDR" "
    2009-11-04 19:48:18, 000001 b 0 CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:66 {33}] '------? \C:\Windows\Help\Windows\en-us"\[l:22{11}]"Stknote.H1S '; source file in the store is also corrupted
    2009-11-04 19:48:18, 000001 b 2 CSI Info [SR] full repair
    2009-11-04 19:48:18, 000001 b 3 CSI Info [SR] validation transaction
    2009-11-04 19:48:19, 000001 b 7 CSI Info [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

    Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    If you do not have a valid antivirus application installed, or your subscription has expired:

    Help: I got hacked. Now what should I do?
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

    Hello!

    For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

    It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

    My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

    Here are more details, where they can help in the diagnosis of my problem:

    • ID of the system board: 30BB
    • Type of processor: Genuine Intel(r) CPU T2250
    • Processor speed: 1730 MHz
    • Total memory: 1024 MB
    • Video memory up to: 128 MB
    • BIOS version: F.06

    Here's the entire message to the blue screen:
    - - - - - - - - - - - - - - - - - - - -
    A problem has been detected and windows has shut down to prevent damage to your computer.

    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

    Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

    Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

    Technical information:

    STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
    - - - - - - - - - - - - - - - - - - - -

    I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

    Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

    With great appreciation for your time,.
    Damaya

    Quick suggestion

    Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
    Good luck

  • Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install?

    Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install? True, it is that it is already installed on your computer. If hide us, an another previous KB2570791 arises in our updates of Windows and asked to install anything, that it was installed... of the questions repeated and very annoying.  Help, please!

    (Microsoft Answers just sent us message have deleted our previous thread, ask for help!) We are simply not that these problems are problems with Windows XP updates related to DST or not?)

    Nadia. PA supporter said that your computer is hacked. He may be right. I can't weigh because I don't know what led him to this conclusion. If your computer is hijacked, then you should address that more that you need to fix this minor update. However, under the resolution of your problem to update, you can try this:

    Assume Windows XP

    Check the C:\Windows\System32\ directory for the presence of the file tzchange.exe

    If the file is not present or if the version of the file is not 5.1.2600.6171 or newer...

    Download the update appropriate 2633952 for your platform here:

    http://support.Microsoft.com/kb/2633952

    Run with - extract switch (e.g., Start > run > "[path to the downloaded file] \WindowsXP-KB2633952-x86-ENU.exe"-x)

    Of course, replace [path to the downloaded file] with the path to the downloaded file.

    Citations may or may not be required depending on the path. Place the x - out the citations if you use them.

    Choose a location for the extracted files (a new folder is recommended)

    Locate the extracted files. File tzchange.exe you want and copy it into C:\windows\System32

    That rerun Windows Update detection to see if the problem is resolved.

  • Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

    Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

    Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

    Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

    Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

    Beginning physical memory dump

    Total physical memory dump. Contact technical support for further assistance group.

    Hi fernandomventura,

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

    Step 2: Follow the steps mentioned in the articles below which deals with a similar question

     

    General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

    http://support.Microsoft.com/kb/945658/

    You receive a random "0x0000008E" error message on a blue screen in Windows XP

    http://support.Microsoft.com/kb/827663

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Updates Windows Vista system never works

    I tried for awhile know what is the problem with my Windows Vista updates, but I have not found a solution for the moment.
    Here is the situation;

    In the Windows Update window, he said;
    "Last check updates: never.
    Updates have been installed: 02-07-2009 at 08:10 (Failed)
    etc... »

    Well, when I try to click on the link above to ' Check for Updates '... He performs the operation of loading, then appears.

    "Windows could not search for new updates"
    Error (s) found:
    Code 80070490 Windows Update encountered an unknown error.

    I really wanted a solution to this problem, but have not found anything, and the search for the solution is quite tiring and confusing. Of course, I think because my system is quite outdated it affects the performance of my computer with my antivirus software also.

    I have the Windows Service Pack 1 installed. I noticed that there is a Windows Service Pack 2, but I don't know if that does not solve the problem either.
    I have Windows Vista Home Premium installed on my computer, are there other specific information about what system?

    Anyway, if I could get feedback with the solution described in measures specific on how to fix... I would be eternally grateful!

    Here's all the info on your error Code Microsoft supplies.
    And if you don't have a good DVD of Vista, you can not make their recommendation of repairs to fix the problem.
    A Dell, HP, etc. recovery disc won't.

    This problem may occur if there is corruption in component maintenance (EC) manifest. http://support.Microsoft.com/kb/958044

    'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

    Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

    Note Run a repair installation will not damage files and applications that are currently installed on your computer.

    To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

    1. Close all applications and restart the computer.
    2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
    3. In the settings window, click install now.

      Note If Windows does not automatically detect the DVD, follow these steps:

      1. Click Start

        Collapse this includes this image

        and then type Drive: \setup.exe in the box start the search .

        Note The placeholder drive is the drive letter of the computer's DVD.

      2. In the list of programs , click Setup.exe.
      3. In the settings window, click install now.
    4. Click connect to get the latest updates for installation (recommended).
    5. Type the CD key if you are prompted to do so.
    6. Click Yes to accept the Microsoft software license agreement.
    7. On the which type of installation do you want? of the screen, click upgrade.
    8. When the installation is complete, restart your computer and try again to install updates.

    Mick Murphy - Microsoft partner

  • CD/dvd drive not detected by windows

    my reader of cd/dvd in my computer hp laptop dv6000 is not detected by windows. It is powered, both the BIOS and Device Manager detects it, but windows doesn't

    IM on Windows Vista Home Premium.
    I had this problem before and I managed to fix it by unplugging and reconnecting the Cd/dvd drive (nothing to lose, no more warranty), but after doing a system restore, the problem resurfaced again.

    The hard drive is a Toshiba MK1637GSX ATA Device
    I tried to use the pages of Microsoft support without success. I have no upper and lower filter.
    I already tried with also Device Manager nothing doesn't.

    Help, please!

    Hello

    Please start from the top and do it, even if you've done it before as is often the
    all operations which solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • Old hard drive PS3 by USB box not detected by Windows Vista

    Hello

    I recently updated my old HD PS3 40 GB with a 500 GB one. Since then, I bought an external HD for my old HD, in the hope that I could use it as a hard drive for some files I have. However, I encountered a big problem - Windows Vista does not detect the HD.

    So far I read a lot of posts on the internet with people having similar problems, but with no definitive answer, so I hoped to get :)

    So far, I've tested the speaker on both the different 40 GB and new 500 GB PS3 in HD, as well as 2-3 computers. Nor are detected by windows... both have the power (green light is on, and I can hear the disc rotation), but are not detected on the management of the devices or programs in 3rd (SwissKnife). As far as the computer is concerned, nothing is connected.

    Thinking that it was probably a hardware problem, I whipped my laptop HD out and connected on a separate computer and it worked without me even having to he invites. This leads me to believe that the device works perfectly and its something about the PS3 HD, who doesn't like Windows.

    The only thing I have not tried is put my old hard drive to the PS3 in the PS3 and reformatting. The only reason for this is a screw on the case of the PS3 has decided, that he's not budging despite all my efforts. Its now 12:45 and I'm too tired to fight with 1 screw more! :) I really don't know not how tabling in so well, 3 others went fine and I deliberately don't screw them in tight with the new HD after I read about the problems people have had by removing the screws.

    Someone at - it suggestions at all? How to get Windows to recognize that this has something plugged in, on how to remove that last screw embarrassing! Whatever that either would be appreciated!

    Thanks in advance

    Hello
     
    Check if the drive works very well with the game station.
    Chipset driver update and see if that makes a difference.
     
    Check if the HARD drive is detected in the Device Manager or disk management tool.
    1. click on start, type devmgmt.msc and press to enter.
    2. from the list of issues, expand disk drives and check the sub for its detection.
    1. Click Start, type diskmgmt.msc and press to enter.
    2. check if the HARD drive is detected.
     
    If the HARD drive is not detected, try the next step.
    Step 1: Connect the HARD drive to the computer and find the hardware check if it detects. To do this, try the following steps.
    1. click on start, type devmgmt.msc and press to enter.
    2. from the list of items, click drives.
    3. click on the Action menu, and then click check for material changes.
    4. follow the wizard to complete the task.
    5. If there is no progress, then click the Action menu and click Add legacy hardware to install the device.
     
    Post back with the results, so that we can help you further.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

  • Brother printer has not detected by Windows 7 64 bit.

    Brother DCP145C has not detected by Windows 7 64 bit. What port is recommended for the local printer - LPT1? Windows 7 should detect when the USB connection, but there is no activity. Similarly, the mode to scan on the printer is not responding to "check connection". Thank you.
    Checked the port LPT1 and COM on Device Manager and seem to work correctly. No updated driver needed updated port.

    Hello Richard,.

    If several USB devices are plug-and-play, printers need a print driver to work even on a USB port. I went to the Brother website and a research on the model of printer "DCP145C" increase any responses - are you sure the model number of the printer (not the part number)?

    You have a printer disk supplied with your printer? If you do, try to use that to install the print driver. As far as LPT1 goes, is for a printer with a parallel port (printer), and the COM ports are for those who use the ports series.

    Thus starts with the right model number and look for brother.com right print driver (or use the disc that came with the printer). Try and see if that solves the problem for you.

    Let me know how you fare.

    Kind regards

    BearPup

  • After that the last windows update windows is not recognizing mynorton antivirus

    I did the recent update of windows on 16/10/12 and norton antivrus also updated.  I have 205 days remaining on my norton subscription; However, when I turned on my computer today windows Action Center prompted me that my firewall is configured incorrectly and windows does not recognize a virus on my computer.  My Norton is still listed as a program on my computer and I can access them from the menu programs.  Help, please.

    Hello

    Thanks for posting the question. I will help you find a solution about the Norton as antivirus programs. Before that, please answer a few questions in order to refine the question.
     
     
     
    1. What is the exact error message?
    2 do you have any other installed third-party antivirus program program Norton?
    3. to confirm, is Norton works properly after the update?
    Method 1: Perform the steps described in the article

    Report on the health system does not detect in Windows 7 antivirus programs

    http://support.Microsoft.com/kb/2482947

     

    Method 2:
     
    If Norton works very well and you still get an error message from Windows. I suggest you to refer to this article to disable the notification. If Norton displays an error message, just reply back to us.

    Method 3:
    If you have multiple antivirus programs installed on the computer other than Norton, please uninstall and check.
    Uninstall or change a program
     
     
     
    Hope this information helps. Response with status so that we can better help you.

  • Transceiver Bluetooth v3.0 can not be detected by Windows 7

    Transceiver Bluetooth v3.0 can be detected by Windows 7, it is broken? Is it possible to fix it? or buy the new v3.0 to replace?

    Hello

    1. If it works much earlier?

    2. do you get any error code or error message trying to connect?

    3. who is the manufacturer of the Bluetooth v3.0 transmitter/receiver?

    4 have have there been recent changes made on the computer before the show?

    Please follow the steps below and update us with the results.

    Method 1: Undetected Hardware devices or does not work - a Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2: Run the fix and verify.

    If please try running the fix from the following link and check if that helps.

    Bluetooth devices do not work correctly on a computer that is running Windows 7

    http://support.Microsoft.com/kb/980396

    For more information, see the links:

    Change settings for a Bluetooth compatible device

    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

    Add a Bluetooth device to your computer

    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

    Connect to Bluetooth and other wireless or network devices

    http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

    Let us know if it helps!

  • Wireless mouse not detected in Windows 8

    computer doesn't detect mouse Microsoft 1679 wireless model. I am running windows 8.0

    Original title: wireless mouse

    Hello Peter,.

    We are sorry for the inconvenience. Let me help you.

    Before you go, let us know a few more details on the sub questions.

    • What is the brand and model of the Windows device you use?
    • What is the status of the device mouse under Device Manager settings?
      Press on logo Windows + R > type devmgmt.msc , and then press ENTER to open the Device Manager.
      Note: Unknown and uninstalled devices are listed under other. The device will have a yellow to this topic alert symbol. The properties of the device indicates that no driver was found.

    Now, follow the methods and check them off below if it can help solve the problem.

    Method 1

    Make sure that the Bluetooth settings is enabled on your device. Follow the steps below.

    1. Turn on your Bluetooth device and make it discoverable.
      The way that make you it discoverable depends on the device. Check the device, or visit the manufacturer's Web site to find out how.
    2. Click the Start button > type Bluetooth > select Bluetooth settings in the list.
    3. Activate Bluetooth > select device > pair.
    4. Follow all the instructions if they appear. Otherwise, you are done and connected.
    Your device Bluetooth and PC will be connected usually automatically each time that the two devices are in range of each other with Bluetooth turned on.

    Method 2

    Material and device Troubleshooter

    Follow these steps to run the Windows in built store. It is a diagnosis that identifies any associated potential driver issues present in your PC.

    (a) write Troubleshooting in the search charm and click on enter.

    (b) click the Troubleshooting .        

    (c) click view all in the upper left corner.

    (d) select the material and devices in the list.

    (e) click Next to run the hardware and devices troubleshooter.

    If this does not help, run the fixit from following link and how it works.

    Hardware devices do not work or are not detected in Windows

    Write to us with updated status and the information required to allow us to help more.

    Thank you.

  • Firefox runs very slowly after updating Windows 10

    Saturday, December 12, 10 Windows spent an age of update itself, with several reboots. Since then, the navigation is horribly slow with Firefox, although my internet connection is always very well (fast my Smartphone using Microsoft Edge). I have two PCs, and both seem to have been affected in the same way. Using the Task Manager, I see that Firefox uses a lot of CPU most of the time - often more than 50%. Even typing and scrolling are very slow, not just downloading.
    I disabled all my add-ins and plug-ins, run in safe mode, rebooted and reinstalled Firefox without result. So far, I'd say that Firefox is the fastest browser. I think that Firefox updated itself 42.0 version a few days, so I have a suspect that this slowdown has occurred just after a Windows Update.

    Update: Windows update itself again today and, like magic, Firefox is again well. So problem solved.

Maybe you are looking for

  • Attempts of incorrect check APPLE ID

    I followed the process what to do when you have changed your Apple ID email address or password - Apple support , but he has asked security questions I don't have answers to.  These responses have been forgotten for a long time because it has been 16

  • Disconnected all the time

    Hello I saw a few topics, it seems I'm not the only one, but I can't find the solution... I try to connect every time, I get disconnected immediately. My partner connects without a problem on the same terminals. I try a lot of things, reset password,

  • Can Equium A100 - I use E drive for data backup?

    My Equium A100-27 has a 80 GB hard drive, it is split in the C drive half and drive E. I understand that the E drive is used for system recovery purposes, but can I also use it to store data? If I use it for how much room must be left free for system

  • Conversion of two 16-bit hexadecimal words in full signed

    I'm currently trying to use labVIEW 2010 to read the temperature and the information of mass flow out of a tool for modbus. However, the instrument returns all values in 2 16-bit hex words by ordering "Intel bytes. I can't convert that signed decimal

  • ATI Radeon X 800 XT MAC Edition GDDR3 256 MB AGP graphics card are to be reviewed

    I have a 30 "HD screen for my Mac G5, but the card is defective I need a replacement. all ideas were to the r - u bye that I saw some in the United States It must be the old type details of the card No Ser ATI Radeon X 800 XT 256 MB GDDR3 memory Mac