DB & silent installation creating with script to new servers

Similar Questions

• Problem with Script using New() to create a #Vectorshape

  Hello

  I'm having a problem with a movie in a movie script, I build and I can't understand why.

  The unique film script, developed by JC in 2004, is reproduced below. It works perfectly in a film in itself. But I need to integrate it into a sequence exists in which the other sprites and behaviour must co-exist.

  The problem I see is that George is created with the new command (can be seen in the message using window put George), but it won't allow attachment of gMem.regPoint, gMem.centerRegPointand so on. These errors any return.

  I would also be open to another solution to the problem. What I have to do is to create rectangles which represent a plan view of a roof on an underlying grid and then be able to slide and place other images on it (it's not a game for training purposes).

  I use MX2004 on a PC. Any help, greatly appreciated.

  Rod Wolford

  ------------------------------------------------------------------------------------------ --

  George overall, gCount, gNum, gLoc, gCreateVert, gMemNum

  on prepareMovie
  clearGlobals()
  _movie.puppetTempo (60)
  gCreateVert = False
  gMemNum = 5
  end

  on mouseDown
  If not (gCreateVert) then
  George = new (#vectorShape, Member gMemNum of castLib 1)
  gMemNum = gMemNum + 1
  gMem.regPoint = point (0,0)
  gMem.centerRegPoint = False
  gMem.closed = False
  gMem.antialias = True
  gMem.strokeWidth = 0.25
  gMem.strokeColor = rgb (0,0,0)
  gNum = getFreeChannel()
  channel (gNum) .makeScriptedSprite (George, point (0,0))
  Sprite (gNum) .encre = 36
  gCount = 0
  gCreateVert = True
  end if
  
  If gCreateVert then
  
  If the doubleClick may
  gCreateVert = False
  gCount = gCount - 1
  gMem.deleteVertex (gCount)
  gMem.closed = True
  gMem.fillMode = #solid
  gMem.fillColor = rgb (random (256) - 1, random (256) - 1, random (256) - 1)
  gFinished = True
  output
  end if
  
  gCount = gCount + 1
  gMem.addVertex (gCount, the mouseLoc)
  
  gCount = gCount + 1
  gMem.addVertex (gCount, the mouseLoc)
  gLoc = the mouseLoc
  
  end if
  
  end

  on enterFrame
  
  If gCreateVert then
  
  gMem.moveVertex (gCount, the mouseH - gLoc [1], the mouseV - gLoc [2])
  theLoc = (gMem.vertexList) [gCount] [1]
  
  If not (theLoc = the mouseLoc) then
  gMem.moveVertex (gCount, the mouseH - theLoc [1], the mouseV - theLoc [2])
  end if
  
  gLoc = the mouseLoc
  
  end if
  end

  on stopMovie
  theCount = castLib (1).member.count
  Repeat with i = 1 to theCount
  If the Member (i) game = #vectorShape then member (i) .erase)
  end repeat
  end

  on getFreeChannel
  
  Repeat with i = 1 to the lastChannel
  If sprite (i).member.type = #empty then
  aNum = i
  output of repetition
  end if
  end repeat
  
  return aNum
  
  end

  While I have not read any of your script, try to replace

  George = new (#vectorShape, Member gMemNum of castLib 1)

  with

  George = _movie.newMember (#vectorShape, Member gMemNum of castLib 1)

  It is possible that the film you want to integrate that into a script #movie with a #new Manager, who must have been typed as a script #parent

• Silent installation and scripted of SSO and vCenter 5.1

  Hello

  
  

  I'm looking to do a silent installation and SSO scripted and vCenter.

  
  

  The following worked for v5.0...

  
  

  «"Start/wait d:\vCenter-Server\vmware-vcserver.exe/q/s/w/L1033 /v" /qn DB_SERVER_TYPE custom = DB_DSN =------DB_PASSWORD = ' vc\'-'XXXXXXX\' DB_USERNAME =------'sa\' VPX_USES_SYSTEM_ACCOUNT = 1/l * v \"c:\vcinstall.log\»»

  
  

  ... but does not work by 5.1 and I can't find any documentation.

  
  

  Any help is appreciated as always.

  
  

  Thank you, Andy.

  Hi Andy,.

  As Boloo said, there are some underlying the rules for vCenter 5.1 that did not exist for 5.0, which means that some additional settings are required for an installation script.

  Here are some examples for you which I use when redeploy my lab (note that B:\VIM_51 is my media extracted folder):

  Installation of SSO

  start/wait B:\VIM_51\"Single Sign On"\VMware-SSO-Server.exe/L1033 /v"/ QR MASTER_PASSWORD = VMware1! CONFIRM_MASTER_PASSWORD = VMware1! CONFIG_TYPE = configuration SETUP_TYPE = basic SSO_DB_SERVER_TYPE =-"Custom\" JDBC_DBTYPE = Mssql JDBC_DBNAME = RSA JDBC_HOSTNAME_OR_IP = DC JDBC_HOST_PORT = 1433 JDBC_USERNAME = RSA_USER JDBC_PASSWORD = VMware1! SKIP_DB_USER_CREATION = 1 DBA_JDBC_USERNAME = RSA_DBA DBA_JDBC_PASSWORD = VMware1! COMPUTER_FQDN = VC. Lab.local IS_SSPI_NETWORK_SERVICE_ACCOUNT = 1 SSO_HTTPS_PORT = 7444 "

  Installation of the Web Client

  Start/wait B:\VIM_51\vSphere-WebClient\VMware-WebClient.exe/L1033 /v"HTTP_PORT HTTPS_PORT 9090 9443 SSO_ADMIN_USER=admin@System-Domain SSO_ADMIN_PASSWORD = = = VMware1! "LS_URL = https://vc.lab.local:7444 / lookupservice/sdk/QR".

  Installation of the inventory

  start/wait B:\VIM_51\"Inventory Service"\VMware-inventory-service.exe/L1033 /v"HTTPS_PORT = XDB_PORT = FEDERATION_PORT = QUERY_SERVICE_NUKE_DATABASE = 1 TOMCAT_MAX_MEMORY_OPTION 10111 10109 10443 = S SSO_ADMIN_USER=admin@System-Domain SSO_ADMIN_PASSWORD = VMware1! "LS_URL = https://vc.lab.local:7444 / lookupservice/sdk/QR".

  vCenter installed (at least)

  Start/wait B:\VIM_51\vCenter-Server\VMware-vcserver.exe/L1033 /v"/ QR DB_SERVER_TYPE = Custom DB_DSN = vCenterDB DB_USERNAME = vpx DB_PASSWORD = VMware1! FORMAT_DB = 1 JVM_MEMORY_OPTION = SSO_ADMIN_USER=admin@System-Domain SSO_ADMIN_PASSWORD = VMware1 S! LS_URL =https://vc.lab.local:7444/lookupservice/sdk IS_URL =https://vc.lab.local:10443 VC_ADMIN_USER=vi-admin@lab VC_ADMIN_IS_GROUP_VPXD_TXT = 0 VPX_USES_SYSTEM_ACCOUNT = 1 VCS_GROUP_TYPE = VCS_ADAM_LDAP_PORT unique = 389 VCS_ADAM_SSL_PORT = 636 VCS_HTTPS_PORT = 443 VCS_HTTP_PORT = 80 TC_HTTP_PORT = 8080 TC_HTTPS_PORT = VCS_WSCNS_PORT = VCS_HEARTBEAT_PORT = 902 "60099 8443

  vSphere Client Installation

  "Start/wait B:\VIM_51\vSphere-Client\VMware-viclient.exe/q/s/w/L1033 /v" / QR ".

  VUM Plugin

  "Start/wait B:\VIM_51\updateManager\VMware-UMClient.exe/q/s/w/L1033 /v" / QR ".

  Install the Update Manager

  Start/wait B:\VIM_51\updateManager\VMware-UpdateManager.exe/L1033 /v"/ QR VMUM_SERVER_SELECT = vc.lab.local VC_SERVER_IP = vc.lab.local VC_SERVER_ADMIN_USER =-'lab\vi-admin\' VC_SERVER_ADMIN_PASSWORD = VMware1! VCI_DB_SERVER_TYPE = Custom VCI_FORMAT_DB = 1 DB_DSN = DB_USERNAME VUM = vpx DB_PASSWORD = VMware1! »

  Hope that helps, shout if you have any questions.

• vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

  Kia Ora.

  Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

  I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

  The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

  News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

  News: 2014-01-15 09 49 58 604 h: build succeeded.

  News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

  News: 2014-01-15 09 49 58 604 h: error (s) 0

  News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

  News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

  News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

  Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

  Any help much appreciated.

  Thank you and happy new 2014!

  Hi there.

  I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

  Now these lines look like this;

  News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

  I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

  Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

  see you soon

• help with script - create the jdeveloper build script to build

  Hello
  I'm being created build script for my portal webcenter application. I use jdeveloper 11.1.1.5.
  
  After reading some content, I am trying to use the simplest approach - it's creating build.xml thru jdeveloper.
  
  I selects the project portal, and then select new > project buildfile. and it creates huge build.xml and build.properties for me.
  
  It is this--
  
  * <? XML version = "1.0" encoding = "windows-1252"? > *.
  * <! - ant buildfile generated by Oracle JDeveloper - > *.
  * <!-generated on April 30, 2013 12:37:38 - > *.
  ' * < name of project = 'Portal' default = "all" basedir = ". ' > *.
  * < property = "build.properties" file / > *.
  * < path id = "library. WebCenter.Content.Templates.Tag.Library"> *.
  -----------------------
  --------------------------
  ------------------
  * < / path > *.
  * < target name = "init" > *.
  * < tstamp / > *.
  * < mkdir dir = "${output.dir}" / > *.
  * < / target > *.
  * < target name = "all" description = "building the project."
  function = "deploy, compile, copy" / >
  * < target name = 'clean' description = 'Clean up the project' > *.
  * < remove includeemptydirs = 'true' quiet = "true" > *.
  "< * fileset dir =" ${output.dir} ' includes = "* / *" / > *.
  * < / remove > *.
  * < / target > *.
  * < name target = "deploy" description = "Deployer JDeveloper profiles."
  function = "init, compile" >
  * < taskdef name = "ojdeploy."
  ClassName = "Oracle.JDeveloper.deploy.ant.OJDeployAntTask"
  URI = "oraclelib:OJDeployAntTask".
  *classpath="${Oracle.JDeveloper.Ant.library}"/ > *.
  * < xmlns:ora ora: ojdeploy = "oraclelib:OJDeployAntTask."
  * Executable = "${Oracle.JDeveloper.ojdeploy.Path}" *.
  *Ora:buildscript="${Oracle.JDeveloper.deploy.dir}/ojdeploy-build.xml"*
  * ora:statuslog="${oracle.jdeveloper.deploy.dir}/ojdeploy-statuslog.xml" > *.
  * < ora: deploy > *.
  * < name of ora: parameter = "workspace."
  *value="${Oracle.JDeveloper.workspace.path}"/ > *.
  * < name of ora: parameter = "project."
  *value="${Oracle.JDeveloper.project.name}"/ > *.
  * < name of ora: parameter = "profile."
  *value="${Oracle.JDeveloper.deploy.profile.name}"/ > *.
  * < name of ora: parameter = "nocompile" value = "true" / >. *
  * < name of ora: parameter = "outputfile."
  *value="${Oracle.JDeveloper.deploy.outputfile}"/ > *.
  * < / ora: deploy > *.
  * < / ora: ojdeploy > *.
  * < / target > *.
  * < name target = "compile" description = "Java compile source files" depends = "init" > *.
  * < javac destdir = "${output.dir}" classpathref = "classpath" * "
  * debug = "${javac.debug}" nowarn = "${javac.nowarn}" * "
  * deprecation = "${javac.deprecation} ' encoding ="Cp1252"source ="1.6"*"
  * target = '1.6' > *.
  * < path src = "src" / > *.
  * < / javac > *.
  * < / target > *.
  * < target name = "copy" description = "copy files to the output directory."
  * depends on = "init" > *.
  * < patternset id = "copy.patterns" > *.
  * < include name="**/*.gif"/ > *.
  * < include name="**/*.jpg"/ > *.
  * < include name="**/*.jpeg"/ > *.
  * < include name="**/*.png"/ > *.
  * < include name="**/*.properties"/ > *.
  * < include name="**/*.xml"/ > *.
  * < include name="**/*.ejx"/ > *.
  * < include name="**/*.xcfg"/ > *.
  * < include name="**/*.cpx"/ > *.
  * < include name="**/*.dcx"/ > *.
  * < include name="**/*.sva"/ > *.
  * < include name="**/*.wsdl"/ > *.
  * < include name="**/*.ini"/ > *.
  * < include name="**/*.tld"/ > *.
  * < include name="**/*.tag"/ > *.
  * < include name="**/*.xlf"/ > *.
  * < include name="**/*.xsl"/ > *.
  * < include name="**/*.xsd"/ > *.
  * < / patternset > *.
  * < copy todir = "${output.dir}" > *.
  * < fileset dir 'src' = > *.
  * < patternset refid = "copy.patterns" / >. *
  * < / fileset > *.
  * < / copy > *.
  * < / target > *.
  * < / project > *.
  
  
  now when I run that build.xml file, here is my output:
  
  * Buildfile: C:\JDeveloper\mywork\buildTest\Portal\build.xml*
  
  * init: *.
  
  * compile: *.
  
  * deploy: *.
  * [ora: ojdeploy]-file build-*.
  * [ora: ojdeploy] <? XML version = "1.0" standalone = 'Yes'? ". > *.
  * [ora: ojdeploy] < ojdeploy-construction > *.
  * [ora: ojdeploy] < deployment > *.
  * [ora: ojdeploy] < name of the parameter = "workspace" value="C:\JDeveloper\mywork\buildTest\buildTest.jws"/ > *.
  * [ora: ojdeploy] < the name of the parameter = value 'project' = 'Portal' / > *.
  * [ora: ojdeploy] < name of the parameter = value "profile" = "*" / > *.
  * [ora: ojdeploy] < the name of the parameter = "nocompile" value = "true" / >. *
  * [ora: ojdeploy] < name of the parameter = "outputfile" value="C:\JDeveloper\mywork\buildTest\Portal\deploy\${profile.name}"/ > *.
  * [ora: ojdeploy] < / deploy > *.
  * [ora: ojdeploy] < default > *.
  * [ora: ojdeploy] < name of the parameter "buildfile' value="/C:/JDeveloper/mywork/buildTest/Portal/deploy/ojdeploy-build.xml"/ = > *.
  * [ora: ojdeploy] < name of the parameter 'statuslogfile' value="C:\JDeveloper\mywork\buildTest\Portal\deploy/ojdeploy-statuslog.xml"/ = > *.
  * [ora: ojdeploy] < / defaults > *.
  * [ora: ojdeploy] < / ojdeploy-construction > *.
  * [ora: ojdeploy]-*.
  * [ora: ojdeploy] 30 April 2013 15:48:06 oracle.bali.xml.gui.jdev.JDevXmlContext _setProjectAndAttachDetach *.
  * [ora: ojdeploy] INFO: open defense in the Portal.jpr project in the creation of XmlContext (web.xml) *.
  * [ora: ojdeploy] 30 April 2013 15:48:06 oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl$ DeployConsoleLogger willPrepare *.
  * [ora: ojdeploy] INFO:-deployment began. ----*
  * [ora: ojdeploy] *.
  * [ora: ojdeploy] 30 April 2013 15:48:06 oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl$ DeployConsoleLogger printTargetPlatform *.
  * [ora: ojdeploy] INFO: target platform is (Weblogic 10.3). *
  * [ora: ojdeploy] *.
  * [ora: ojdeploy] 30 April 2013 15:48:07 oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl$ DeployConsoleLogger willPrepare *.
  * [ora: ojdeploy] INFO:-deployment began. ----*
  * [ora: ojdeploy] *.
  * [ora: ojdeploy] 30 April 2013 15:48:07 oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl$ DeployConsoleLogger printTargetPlatform *.
  * [ora: ojdeploy] INFO: target platform is (Weblogic 10.3). *
  * [ora: ojdeploy] *.
  * [ora: ojdeploy] 30 April 2013 15:48:07 oracle.jdevimpl.deploy.common.ProfileDependencyAnalyzer deployImpl *.
  * [ora: ojdeploy] INFO: runs the analysis of dependence... *.
  * [ora: ojdeploy] *.
  * [ora: ojdeploy] 30 April 2013 15:48:08 oracle.jdevimpl.deploy.common.ModulePackagerImpl deployProfiles *.
  * [ora: ojdeploy] INFO: deployment of 3 profiles... *.
  * [ora: ojdeploy] *.
  * [ora: ojdeploy] 30 April 2013 15:48:15 oracle.adfdtinternal.model.portlet.mds.PortletMarPlugin exportPortletMds *.
  * [ora: ojdeploy] INFO: perform a complete export of the producers to: [C:\JDeveloper\mywork\buildTest\.mdsExport].*
  * [ora: ojdeploy] 30 April 2013 15:48:15 oracle.adfdtinternal.model.portlet.mds.PortletMarPlugin exportPortletMds *.
  * [ora: ojdeploy] INFO: export of portlet metadata and customizations.*
  * [ora: ojdeploy] *.
  * [oracle.mds* ora: ojdeploy] 30 April 2013 15:48:16
  * [ora: ojdeploy] NOTIFICATION: the export operation started.*
  * [oracle.mds* ora: ojdeploy] 30 April 2013 15:48:16
  * [ora: ojdeploy] NOTIFICATION: export is complete. Total number of documents successfully processed: 0, total number of documents failed: 0.*
  * [oracle.mds* ora: ojdeploy] 30 April 2013 15:48:39
  * [ora: ojdeploy] NOTIFICATION: the export operation started.*
  * [oracle.mds* ora: ojdeploy] 30 April 2013 15:48:39
  * [ora: ojdeploy] NOTIFICATION: export is complete. Total number of documents successfully treated: 23, total number of documents failed: 0.*
  * [ora: ojdeploy] 30 April 2013 15:48:39 oracle.mds.internal.dt.packaging.MDSMarDeployer logFileWritten *.
  * [ora: ojdeploy] INFO: written MAR file to file:/C:/JDeveloper/mywork/buildTest/deploy/AutoGeneratedMar.mar*
  * [ora: ojdeploy] 30 April 2013 15:48:52 oracle.mds.internal.dt.packaging.WarPackagingListener prepared *.
  * [ora: ojdeploy] WARNING: WARNING: integration of view ADF with MDS not configured to 'Portal.jpr', JSPX, JSFF files or their customizations to MAR will be ignored when running. Enable setting customizations seeded under the view of the ADF option in the project properties to configure even MDS
  * [ora: ojdeploy] 30 April 2013 15:49:03 oracle.jdevimpl.deploy.war.WarDeployer writeWarFile *.
  * [ora: ojdeploy] INFO: Application Module Web wrote to file:/C:/JDeveloper/mywork/buildTest/Portal/deploy/buildTest_webapp1.war*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace ' / oracle/adf/share/prefs is mapped to deploy metadata-store-use 'WebCenterFileMetadataStore' target in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/cycle of life/importexport" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/lock" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/rc ' is mapped to deploy target the metadata store use"WebCenterFileMetadataStore"in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace ' / persdef' maps to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace ' / shared/oracle/wcps ' is mapped to deploy metadata-store-use 'WebCenterFileMetadataStore' target in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace ' / ' xliffBundles is mapped to deploy metadata-store-use 'WebCenterFileMetadataStore' target in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/research/scopedMD" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/framework/scope/scopedMD" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/page/scopedMD" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace ' / ' pageDefs is mapped to deploy metadata-store-use 'WebCenterFileMetadataStore' target in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/adf/portlet" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/adf/portletappscope" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/doclib/scopedMD" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/security/scopedMD" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/siteresources/shared" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:24 oracle.mds.internal.dt.packaging.EarPackagingListener generateConfigForMAR *.
  * [ora: ojdeploy] INFO: Info: Namespace "/ oracle/webcenter/quicklinks/scopedMD" is mapped to deploy target the metadata store use "WebCenterFileMetadataStore" in the ADF - config.xml but no namespace metadata is included in the MAR.*
  * [ora: ojdeploy] 30 April 2013 15:49:30 oracle.jdevimpl.deploy.ear.ApplicationAssembler logFileWritten *.
  * [ora: ojdeploy] INFO: Application Module Enterprise wrote to file:/C:/JDeveloper/mywork/buildTest/deploy/buildTest_webapp1.ear*
  * [completed oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl$ DeployConsoleLogger ora: ojdeploy] 30 April 2013 15:49:30 *.
  * [ora: ojdeploy] INFO: time for deployment: 1 minute, 23 seconds *.
  * [ora: ojdeploy] *.
  * [completed oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl$ DeployConsoleLogger ora: ojdeploy] 30 April 2013 15:49:30 *.
  * [ora: ojdeploy] INFO:-deployment is complete. ----*
  * [ora: ojdeploy] *.
  * [completed oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl$ DeployConsoleLogger ora: ojdeploy] 30 April 2013 15:49:30 *.
  * [ora: ojdeploy] INFO: time for deployment: 1 minute, 23 seconds *.
  * [ora: ojdeploy] *.
  * [completed oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl$ DeployConsoleLogger ora: ojdeploy] 30 April 2013 15:49:30 *.
  * [ora: ojdeploy] INFO:-deployment is complete. ----*
  * [ora: ojdeploy] *.
  * [ora: ojdeploy] summary status written to /C:/JDeveloper/mywork/buildTest/Portal/deploy/ojdeploy-statuslog.xml*
  
  * copy: *.
  
  * all: *.
  
  * SUCCESSFUL BUILD. *
  Total time: 12 minutes 1 second *.
  
  
  
  However when I check the deployments in the console, I don't see my deployed application.
  I see no error as well output.
  
  can anyone suggest where I'm wrong?
  
  Thank you.

  Happy that you do your research :-)

  Yep, wlst is the best option for a generation automated. Using wlst provides options to configure your MDS application. I should have one of my python deploy scripts somewhere. For this, I'm going to watch tonight.

• While the MBP for repair, I downloaded FCP 10.2.3 to a computer lent. Back on my own machine, FCPro borrowed machine library will not be opened because it was created with a newer version of the CPF App Store not 10.2.3 full download

  While my MacBook Pro for the repair, I downloaded FCPX to a computer lent 10.2.3. Back on my own machine, library of FCPX of the borrowed machine will not open because it was created with a newer version of FCPX. And the App Store won't let me finish a 10.2.3 download because the FCC is already on my computer - and he says that no update is available.

  FWIW - MBP 15 "beginning 2011, running OS 10.11.6 Beta (15G7b)

  Any ideas that can help me to keep the day of the Assembly, I did on the other machine?

  Move the application to the trash and try to download it from the shopping page.

• Problem with the Installation of JAVA in my new Dell running Windows 7

  Problem with the Installation of JAVA in my new Dell running Windows 7 - error message when you try to intall Java using Chrome.

  "lib'charsets.jar: old file not found."  However, a file of the same name was found.  No updates since the contents of the file do not match. »

  Then "Java update fails to apply the changes to your system."

  Then "error 1722.  There is a problem with this Windows Installer package.  A fun program as part of the Setup did not finish as expected.

  Earlier, I had a problem with the video and had Windows reinstalled 7.  Now my AOL games don't show/reading.  JAVA said error 1722 is an InstallShield error code. It indicates that the installation process has failed. The exact reason for this error is not known at this time.  I was told to uninstall JRE (Java Runtime Environment).  I find two versions of Java on my system (no JRE) - Java (TM) 6 - update 14 and 14 (64-bit).  Should I uninstall both?... OR WHAT?

  Hi Betty48228,

  Here's how to solve your problem:
  (1) uninstall all versions of Java.
  (2) the uninstall will probably fail. If so, get Revo Uninstaller free http://www.revouninstaller.com/revo_uninstaller_free_download.htmland uninstall Java in advanced mode (integrated Java uninstaller runs, failure and then Revo will delete everthing manually). You will need to restart your PC.
  (3) reinstall Java: http://java.com/en/download/

• Create a script to list all the .bat and .cmd files with the dir command &

  Hello

  Im trying to create a script that will list all the .bat and .cmd files in a specific folder and add the data to a new file (file.txt) - example below:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat>>desktop\file.txt/OD

  IM able to search the F drive and the list of all the .bat files using a generic parameter, but ideally id like to search for .bat and .cmd files, but whenever I have it try does not work. Any ideas?

  I tried the following:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat,*.cmd>>desktop\file.txt/OD

  Any help is appreciated, the reason for which I need to check all the .bat and .cmd files is to ensure that the scripts on a cluster are all data, so need them all listed in a doc if possible

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for guys official script Forum. Please ask your question in the official Scripting Guys Forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

• How can I access the models "Scripted' in PS creative cloud as described in the tutorial titled"creating with Patterns"Andy Anderson as of 13/01/2014?  Specifically, the option "Trees".  They are not available in the drop-down list.  I downloaded t

  Can't access scripted bosses - specifically "trees".

  in the program Photoshop Creative Cloud such as shown in the tutorial "Creating with Patterns" Andy Anderson.

  I found the answer.  The tutorial is not common.  It seems that the 'trees' have been moved to the menu Filter under the section of rendering.  Please up date the tutorial to reflect this change/move.  Thank you

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

• I am new to Dreamweaver and to modify the prior site created with XSite Pro.  How to upload my Web site?

  How to import my site created with a different web designer?

  I don't think you'll like what you see in DW.  Best advice, rebuild the site.

  Basically, there is nothing much to import. Simply open DW, click Site > new Site and say DW where you keep the files of your site on your local hard drive.

  That said, no XSite Pro features exclusive web, you used will probably not work in DW.  You may need to find replacements for them.

  Good luck!

  Nancy O.

• Addition of the new Image and text to an existing Page created with Tables

  Work in DW 5.5

  I try to add a new image/link and a small amount of text to an existing web page that was created with tables and centered.  I use AP div tags. One for the image and one for the text.  Everything works fine, but I can't get the new anchor points and to re - center with the rest of the page.  I'm not able to get around the "absolute positioning".  I tried different solutions of various tutorials but I can't make them work with tables.

  Added items are a Facebook button and text.

  Go to: http://www.sugarhollowfarms.NET/index.html See the problem.

  Help, please. I'm not that experienced.

  First, make a back up of the page before you implement the changes below!

  Take the bit of code below to

  ...... to..........

  and insert it directly after the opening tag div FWTableContainer and before your opening table tag (see location below):

  ">

  Join us
  

  on Facebook

  Then add - position: relative; -to the css of FWTableContainer (as shown below):

  {#FWTableContainer209091602}

  / * The div master to make sure that our contextual menus get properly aligned.  Be careful when you play with this one. */

  position: relative;

  margin: auto;

  Width: 800px;

  height: 600px;

  text-align: left;

  top: 20px;

  background-image: url(images/homepage_new3.jpg);

  border: medium solid #336600;

  position: relative;

  }

  Edit the css for FBlogo to as below:

  {#FBlogo}

  position: absolute;

  left: 700px;

  top: 380px;

  Width: 91px;

  z-index: 1;

  text-align: center;

  }

  Edit the css for bodytext as below:

  {.bodytext}

  do-family: Verdana, Arial, Helvetica, without serif.

  do-size: 11px;

  line-height: 13px;

  margin: 0;

  padding: 0;

  }

• Any ideas why weather script will not appear in the index created with DW

  For an example of what I want to do with DW, please see my page now created with CoffeeCup. It will cost $49.

  http://96.9.48.31/

  This did not require a moment of my time asking them for help. It is not perfect and there are a lot of code that could be cut out, but it gives me results. I need assistance in support of DW to do what I know, the software can do, but maybe not easy at the beginning.

  Why the weather script does not play when the page is created with DW, but when created with Publisher and cup of coffee?

  Any help would be greatly appreciated.

  I want to use Dreamweaver, really I do. I have a whole database downloaded with the software of connection Member, just waiting for me to install. I don't install it until I first get a handle on a bug of ugly time.

  atmydeskworking wrote:

  Why the weather script does not play when the page is created with DW, but when created with Publisher and cup of coffee?

  The reason that the weather-report is not working in the Dreamweaver version of the page is that you have a gap between the words 'white' and '&' in the link below. Delete the gap and it will work.
  
  http://weatherreports.com/jscript.html?width=234&height=60&theme=white &location=Fairfax%2C%20Minnesota%2055332&units=f"
  

• marking of documents created in the last week with the word 'NEW '.

  Hi all.

  I have a mysql database with a table 'articles' containing the following (and other) fields:

  • category_name
  • Date_Created
  • level_name
  • title
  • Summary

  I have set up a query to extract information on the statutes of the db. The questioning of basic works very well. It looks like this:

  $r = @mysqli_query ($dbc, $q);

  / * display the results * /.

  If ($r) {}

  while ($row = mysqli_fetch_array ($r, MYSQLI_ASSOC)) {}

  echo "< div class ="derniers_articles"> < strong class >: < facilities >". "." $row ["category_name"]. ' < br / > < strong > < em > posted on: < facilities > '. $row ["date_created"]. ' < br / > < level >: < facilities > '. $row ["level_name"]. "< /em > < h3 > '. $row ["title"]. "< / h3 > < class p ="last_ten"> < em >. $row ["Summary"]. ' < /em > < /p > < / div > ';

  }

  mysqli_free_result ($r);

  } else {}

  echo "< p > Prob get the info you need." < /p > ';

  }

  The query gives me result like this:

  Category: News
  Posted the: 2011-02-10 22:58:05
  Level: 5, 6

  Are you interested in politics?

  There are too many young people who don't is interested not in politics. It's a secret United Nations pay no one. However, this isn't the case of Darcy Lonergan who, at 21 years old, the youngest is launching itself candidates who pour win a seat in the next Parliament.

  Now, I want to mark all records created in the last week with the word 'NEW' so I inserted the line in bold in the following code:

  $r = @mysqli_query ($dbc, $q);

  / * display the results * /.

  If ($r) {}

  While ($row = mysqli_fetch_array ($r, MYSQLI_ASSOC)) {}

  echo "< div class ="derniers_articles"> < strong class >: < facilities >". "." $row ["category_name"];

  If (DATE_SUB (CURDATE (), 7 DAYS INTERVAL < = DATE($row['date_created']))) echo "< strong > NEW < facilities > ';"

  echo "< br / > < strong > < em > posted on: < facilities > '." $row ["date_created"]. ' < br / > < level >: < facilities > '. $row ["level_name"]. "< /em > < h3 > '. $row ["title"]. "< / h3 > < class p ="last_ten"> < em >. $row ["Summary"]. ' < /em > < /p > < / div > ';

  }

  mysqli_free_result ($r);

  } else {}

  echo "< p > Prob get the info you need." < /p > ';

  }

  .. but he throws this error:

  Parse error: syntax error, unexpected T_LNUMBER in [file path] on line 31

  31 is the "BOLD" line, I inserted. Can someone tell me what I am doing wrong? ("The date_created field is a timestamp like this ' 2011-01-08 18:06:39 '.)

  I'm new to php so be nice!...

  Thanks in advance.

  Hugh

  I think I'd be inclined to do in the query.

  By example SELECT field1, Field2, field3, etc, IF (DATEDIFF (NOW (), dtCreated)< 7,="" 'new',="" '')="" as="" recordstatus="" from="">

  Then echo just the value of the recordStatus for each record.

• response file is not created for silent installation

  Trying to create a response to a silent installation file. From page 15 of the Installation and the Administration of PDF:
  
  Example: ' < location of the Setup file > \setup.exe "/ r /f1" < location of the answer "
  "file > \setup.iss.
  
  Fact that, but no setup.iss after running through the installation. Did a search on the C drive too, but found nothing.
  
  It is for the Developer Version 3.5.1 esp2 PUK.
  
  Our environment is Windows XP Service Pack 2.
  
  Anyone know why the answer file is not created as the directions indicate? Thank you.

  Hi Jason,

  I might have an idea on why it does not work.

  When you run setup.exe you see a menu option which indicates that following:

  Read me (see the Upgrade Guide)
  Read me (see the Setup Guide and Administration
  Installation (installation of the Oracle User Productivity Kit 3.5.1...)

  If so, you need to get out of this configuration. Then in the source (CD-ROM or the location of the installation), browse to the UPKTool folder, there you will see a file named setup.exe, it is the executable that is launched when you click on the button install.

  In any case, to create a response file, you will need to run this setup.exe, so when you run at a command prompt, you should have something like this:

  / F1/r 'D:\UPKTool\Setup.exe' "C:\\setup.iss"

  I mentioned the C drive instead of drive D because I assume that D is a CD-ROM drive otherwise you can place it on any place.

  I hope this helps.

  Kind regards
  Ray

• Issues related to running applications after installation using a package created with CC Packager

  I am a technician in the field with a school district in Idaho. We just moved to Windows 10 this year, deploy us through SCCM. For the first time this year one of my schools chose to share the cost of a site license for the creative cloud. The license of the company is owned by a company called the OETC. The problems come after installing the suite on a local computer using a building package that I created with CC package. Programs install fine and I can run them without any problems, I have administrator rights. For reasons of network security and security that we do not generally allow access to C: drive by students, (more restrictive) and staff, (less restrictive but still limited), it seems that the software more, we need to package will not work under these restrictions. for example:

  • First pro is used by a teacher and students enrolled in a course of video journalism. The teacher has a network of only to peer support that it maintains separate districts. I gave him a copy of the version to install, and it gets an error when it runs, indicating that a .dll file is missing the exact message is:

    • This program cannot start because API-MS-Win-CRT-Runtime-L1-1-0.dll is missing on your computer.  Try reinstalling the program to fix this problem. Sound computer is
      using Windows 7 and the browser is IE 9. He tried to upgrade to IE 10 and 11, and he wouldn't.

  • I have a staff of security so that would like to use first pro to stream video of cameras throughout the school in support of disciplinary matters. When they run the program starts to open, then everything stops. I actually did him a member of the local administrator group, which made no difference, I also had him create an Adobe ID, so all the identifications with the Adobe servers should work.

  Another scenario with a group of students and their teacher in a digital photography class is when you use the room light, they are allowed to save catalogs on the C: drive. the only space that they ae allowed to write to is their own office.

  These problems are fixable? Can I access the .dll missing? Can save us a space of one drive for students or at least a network drive?

  Hello

  We already have a feature request to our engineers for that, I've added your voice!