Load a file EDS into LabView 2012
Through research I found that DeviceNet Configurator is no longer available. I'm under LabView 2012 with IndComm/Devicenet 2.2 pilot. What replaces the DeviceNet Configurator? How to load the EDS files?
Thank you
Tennessee Paul
My post here on a different topic, I thought that I would wear it to conclude this thread.
Load an EDS file to the slave device
- Right-click on the slave device
- Select "Sheet"... »
- Click on add files...
- Navigate to the location of the EDS file.
- Select the file.
- Click OK.
- In the left pane, expand the data sheet newly added up to reach the node displays the version.
- Select the version.
- Click OK.
Check the device and file EDS
- Right-click on the slave device
- Select utilities
- Select the Panel of Test online
- Select the option 'Device status' in the field of category on the left.
- On the right, select the slave device, you want to check.
- Click on "check the device".
- Read the errors/warnings or lack thereof.
Edit the file EDS
To change the EDS file, I used EZ-EDS , which is a specific devicenet EDS of ODVA freeware Editor.
I did my corrections and saved my file EDS. (After having saved my original, of course).
Remove the installed Labview EDS file
- Navigate to the following location: C:\ProgramData\National Instruments\NI-IndComm for DeviceNet\Datasheet
- Remove the sheet (Note: there is more that one datasheet added manually.) Additional EDS files come with the IndComm driver. Find the EDS file for the specific device that you want to replace and delete).
Tags: NI Products
Similar Questions
-
How to load the Calibration file Agilent Instruments LabView 2012
I'm using a vector Network Analyzer. Calibration is essential to give our creditbility of measurement results. In our case, we use Agilent instruments. Newer models allow certain calibration profiles be saved as States of calibration. These files are saved to the local hard disk of the unit and are loaded when needed.
What is the equivalent to set all the parameters of calibration in this .cal file in the Agilent with Labview 2012 instrument?
I downloaded the driver for my instrument and even ran the sample programs. It works fine but the calibration is set to the preset state that makes my whole system inaccurate.
It should look like this (assuming that it's a NAP you use):
-
Error Code HDL with CRio RFP generation after update for LabView 2012
Hello everyone,
I use a CRio DP Comsoft master/slave module for my communication with a PLC system. The application worked perfectly under LabView 2011. After the update to LabView2012, I got an error message that the HDL Code generation failed. After that I've updated also the Software NI Profibus CRio in Version 1.3, but this n ' t´t solve the problem. The next step was to use the example of project code "CS_cRIO-PB_DP-MasterExample" which was delivered with the new NI CRio Profibus software. Even with this code example, the problem still exists. For detailed information on the configuration and the error message please refer to the screenshot. Any help or idea would be appreciated.
Jürgen
Hi Jürgen,
I looked inside and could reproduce this error. Somehow the compiler with LV 2012 has problems with the coded 8.5.1 Subvi LV. Please use the attached VI and copy it to the following location. (\\Program Files\National Instruments\LabVIEW 2012\vi.lib\addons\Comsoft.lib\cRIO PB)
Before do you it please close your LabVIEW.
Then try to compile again.
Let me know if it still does not. We are currently working on a new installer that will correct this problem.
DirkW
-
File reading in Matlab, LabVIEW 2012
Hello
I am very new to LabVIEW and this could be a very simple question.
I'm reading a simple labview .vi file in Matlab. I use the version of LabVIEW 2012 32 bit. I saved a file .vi and tried to load it into Matlab as mentioned inof LabVIEW in the MATLAB® environmentsection of http://digital.ni.com/public.nsf/websearch/2f8ed0f588e06be1862565a90066e9ba?Open Document. But I can't load the data. Maybe I am doing it the wrong way.
In Section Of LabVIEW in the MATLAB® environment , I do not understand what is meant by ""write into the file of worksheet VI on the programming "' e/s filespalette. '"
Can someone explain to me how to do this? I'm just trying to read any exmple saved in LabVIEW in Matlab. If anyone can give another example, which would also help a lot.
Thanking you.
INDI
INDI,
I think that your problem may be to understand the terminology. .Vi files are LabVIEW programs, not data. Those who cannot be "read" by MATLAB.
Writing in the worksheet File.vi is a VI that comes with LV on the palette file. It can be used in your program to write data to a file text delimited by tabs. These files can be read by MATLAB.
What it the way which operate you: generate the data you want to save in your LabVIEW VI in the form of a table of numbers. Wire of this array of numbers to Scripture in the File.vi worksheet at the time where you want to save the data. If you do not connect a path at the entrance to the path of the file, a dialog box appears asking where to save the data.
Lynn
-
Load a file in tiara with a use using LabVIEW
Is it possible to load a file into tiara with a use that is customized by using LabVIEW. I looked through the palette and see nothing.
Hi Siriusly,
I've added 2 additional lines of configuration of trainer to the use, and now that the last row of empty values has disappeared from a single file you sent me.
Brad Turpin
Tiara Product Support Engineer
National Instruments -
Conversion of files from LabView 2012 to 2011
Hello
I'm new to Lab View. I'm stuck with the conversion of this file of LabView 2012 to 2011. Help is highly appreciated
Thank you
With respect,
Jagadish
-
Where LabVIEW 2012 keeps the files recently opened?
When you open LabVIEW 2012, the right side of the home screen displays a list of existing open. In my case, 'bad' screws and projects (some no longer exist) appear. I would like to change this list to clear the junk. However, it is more in the file LabVIEW.ini, there doesn't seem to be (although I may have missed it) in my LabVIEW data folder.
Who knows where it is?
Found! This is the file LabVIEW.ini - either I was watching 'bad' that precedes it, or someone put something weird in my tea when I wasn't looking. Cleaning now...
-
How to load several files column data into essbase using the rule of load.
Hello
I need to load a file of data into essbase, which includes data from several columns.
Here is a sample file.
Year, Department, account, Jan, Feb, Mar, Apr, may, June, July, August, Sept, Oct, Nov, Dec
FY10, ministere1, account1, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
FY10, agencies2, account1, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
FY10, ministere3, account1, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
Thank you
SirotBut this isn't an error as such, that is to say that no data values have been changed so that they possible already exist in the database.
If there is no release, they should be in a file of errors.See you soon
John
http://John-Goodwin.blogspot.com/ -
Hi all
First of all, I would like to thank everyone on this forum. You may not know it, but you helped me get up now with my request.
Forgive my stupidity, as I'm a noob with ActionScript. But what I try to do is to read an excel file that I have stored in my src file. Its called "t1.xls".
I use a library called as3xls and this is what my code looks like:
var xls:ExcelFile = new ExcelFile(); var ba:ByteArray = new ByteArray(); var f:File = File.applicationDirectory; f = f.resolvePath("t1.xls"); ba = tempFiles.data; xls.loadFromByteArray(ba);
ExcelFile class is a class that comes with the as3xls library.
I get an error when you do this, which is basically telling me that my ByteArray is null. I don't know much, but I suspect that I do not read the file correctly. As I said earlier, the file, "t1.xls" is located in my src folder.
I would like to know if I'm reading the file correctly, and if I do something wrong, how do I make a ByteArray from a file in my src file.
Thanks in advance
Hello
You must first load the file until you can access the ByteArray of this file data.
Here's a simple example:
private function onClick(e:Event):void { loadStatus = "Loading file"; _xlsFile = File.applicationDirectory.resolvePath('sample.xls'); _xlsFile.addEventListener(Event.COMPLETE, onFileLoaded); _xlsFile.load(); } protected function onFileLoaded(event:Event):void { var ef:ExcelFile = new ExcelFile(); ef.loadFromByteArray(_xlsFile.data); loadStatus = "Loaded sheets: " + ef.sheets.length; }
You should also know that as3xls is using the Flex framework classes then you will not be able to use this library in your project in pure AS3/QNX.
Here is the example of Flex Hero project where you can see the complete example.
You will need Flash Builder Burrito to open the project.
-
load the file into the virtual machine
How can I load any file to the virtual machine using java api
How to download the file in the guest on VMware operating system:How to transfer the file to the operating system guest on VMware | DoubleCloud = & gt; Private cloud and Public Cloud
How to download files from GOS on VMware:How to download a file from the operating system guest on VMware | DoubleCloud = & gt; Private cloud and Public Cloud
If you have any question/problem related to this, please post on above blog
-
Load a complex DLLs in Labview
Hi guys:
I need to load a dll into labview, the prototype is:
running long (const char a [],
const double b,
const int c,
double d [5] [23],)
Double e [4],
);I put the prototype in labview is:
Uint64_t function (const CStr has,
const double b,
const int32_t c,
Array2DDouble * d,.
Double * e);
but the function does not work, I suppose that it maybe some concern to the parameter d, the attached file is the config box,.
Someone tell me where is the problem?
Thank you
Good news. I have fix
-
How to load a file automatically from a folder that contains batch files?
I have pictures taken every 2 or 3 minutes and then dumped into a file with number of sequentail as file names.
Now, I want to find a routine to check the last picture and load it into labview automatically.
Please be aware that I have other material acquisition of images and store them in the computer, all the tips with the help of any other device I/O are appreciated, but not necessary.
Task is simpel! (hopfully for you.) Just find the latest file in a fixed folder and open it in labview (for example reading JEPG file.vi). any ideas?
Thank you!
I have written a VI to find the most recent file (well, changed the file) in a given folder.
-
How to Read. File HWS in LabVIEW
Hello
I'm new to LabVIEW. I used the Analog Waveform Editor software to create an arbitrary waveform. Home-made file HWS that I like to read samples of theis in LabVIEW and as their output on a DDS signal generator.
I know that one. HWS file read using NOR-HWS Express load.vi but my labview hasn't this vi!
Please guide me! what I can do! This vi is a downloadable vi? If there is, where can I download it!
MDLT,
The load.vi of NOR-HWS Express is a VI that is loaded into LabVIEW when Signal Express is installed. You have the Signal Express? It is included in the packages complete, professional and Development Suite LabVIEW.
-
Error loading XML file in the column of XMLTYPE through SQL loader
Hi gurus,
I am trying to load the XML file into the column of XMLTYPE through SQL Loader but the errors themselves. Here are the details
Databases
The table structureSQL*Plus: Release 10.2.0.3.0 - Production on Tue Jul 24 17:17:55 2012 Copyright (c) 1982, 2006, Oracle. All Rights Reserved. Connected to: Oracle Database 10g Release 10.2.0.3.0 - 64bit Production BANNER ---------------------------------------------------------------- Oracle Database 10g Release 10.2.0.3.0 - 64bit Production PL/SQL Release 10.2.0.3.0 - Production CORE 10.2.0.3.0 Production TNS for Linux: Version 10.2.0.3.0 - Production NLSRTL Version 10.2.0.3.0 - Production
XML (simple.xml) fileCREATE TABLE TH_XML ( COL_ID_1 VARCHAR2(100 BYTE), IN_FILE_1 XMLTYPE ) XMLTYPE IN_FILE_1 STORE AS CLOB (TABLESPACE SMDAT)
Control file<?xml version="1.0"?> <catalog> <book id="bk101"> <author>Some Author1</author> <title>Some Title1</title> <genre>Computer</genre> <price>44.95</price> <publish_date>2000-10-01</publish_date> <description>creating applications</description> </book> <book id="bk112"> <author>Some Author2</author> <title>Some Title2</title> <genre>Computer</genre> <price>49.95</price> <publish_date>2001-04-16</publish_date> <description>Microsoft Visual Studio 7 is explored in depth</description> </book> </catalog>
LOG fileLOAD DATA INFILE 'c:\simple.xml' APPEND INTO TABLE TH_XML XMLTYPE(in_file_1) ( col_id_1 filler CHAR (100), in_file_1 LOBFILE(CONSTANT "c:\simple.xml") TERMINATED BY EOF )
I get error ORA-00904: "SYS_NC_ROWINFO$": invalid identifier in the logfile (mentioned above). Could someone help me know where I am doing wrong?SQL*Loader: Release 10.2.0.3.0 - Production on Tue Jul 24 16:42:25 2012 Copyright (c) 1982, 2005, Oracle. All rights reserved. Control File: c:\my_file.ctl Data File: c:\simple.xml Bad File: c:\simple.bad Discard File: none specified (Allow all discards) Number to load: ALL Number to skip: 0 Errors allowed: 50 Bind array: 64 rows, maximum of 256000 bytes Continuation: none specified Path used: Conventional Table TH_XML, loaded from every logical record. Insert option in effect for this table: APPEND Column Name Position Len Term Encl Datatype ------------------------------ ---------- ----- ---- ---- --------------------- COL_ID_1 FIRST 100 CHARACTER (FILLER FIELD) IN_FILE_1 DERIVED * EOF CHARACTER Static LOBFILE. Filename is c:\simple.xml Record 1: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 2: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 3: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 4: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 5: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 6: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 7: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 8: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 9: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 10: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 11: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 12: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 13: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 14: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 15: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 16: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 17: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 18: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 19: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 20: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 21: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 22: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Record 23: Rejected - Error on table TH_XML. ORA-00904: "SYS_NC_ROWINFO$": invalid identifier Table TH_XML: 0 Rows successfully loaded. 23 Rows not loaded due to data errors. 0 Rows not loaded because all WHEN clauses were failed. 0 Rows not loaded because all fields were null. Space allocated for bind array: 256 bytes(64 rows) Read buffer bytes: 1048576 Total logical records skipped: 0 Total logical records read: 23 Total logical records rejected: 23 Total logical records discarded: 0 Run began on Tue Jul 24 16:42:25 2012 Run ended on Tue Jul 24 16:42:26 2012 Elapsed time was: 00:00:00.23 CPU time was: 00:00:00.05
Thanks in advance.
Published by: 876991 on 24 July 2012 14:18Hello
This remove the control file:
XMLTYPE(in_file_1)
It is used only if the target table is an array of XMLType object.
For an XMLType column LOBFILE is sufficient, for example:
LOAD DATA INFILE * APPEND INTO TABLE TH_XML ( col_id_1 CHAR (100), in_file_1 LOBFILE(CONSTANT "c:\simple.xml") TERMINATED BY EOF ) begindata MYID1
It tells SQL * Loader data consisting of one record with COL_ID_1 = "MYID1" and content = "c:\simple.xml" IN_FILE_1
SQL> CREATE TABLE TH_XML 2 ( 3 COL_ID_1 VARCHAR2(100 BYTE), 4 IN_FILE_1 XMLTYPE 5 ); Table created. SQL> host sqlldr control=test.ctl Username:dev Password: SQL*Loader: Release 11.2.0.2.0 - Production on Mer. Juil. 25 01:30:46 2012 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. Commit point reached - logical record count 1 SQL> set long 5000 SQL> column col_id_1 format a15 SQL> select * from th_xml; COL_ID_1 IN_FILE_1 --------------- -------------------------------------------------------------------------------- MYID1
Some Author1 Some Title1 Computer 44.95 2000-10-01 creating applications Some Author2 Some Title2 Computer 49.95 2001-04-16 Microsoft Visual Studio 7 is explored in depth -
Cannot find FP write in LabVIEW 2012
System: Win7 64 bit
LabVIEW: LabVIEW 2012 (64-bit)
I can't find FP read/write etc in LabVIEW 2012.
I installed FieldPoint 6.11 and disk driver OR. Nothing happened... And I can't find "fieldpoint" folder in "vi.lib".
I noticed that my Win7 "Program files" and "Program files (x 86)". The labveiw program was in "Program files", I think. But there is also a "National Instrument" folder in "program feels (x 86). I just used by default to install the labivew.
Do not know why. Can anyone help?
Hi Yang,
FieldPoint is not supported with 64-bit LabVIEW. I propose to install LabVIEW 32 bit and then see if you can see these FieldPoint VI.
Kind regards
Maybe you are looking for
-
Satellite L500 - Windows 8 GPU Drivers
Hey! My apologies if this isn't the right forum. Not sure if it is purely for laptops upgraded via the official update program. But anyway, I have a Satellite L500-1ZR which is not covered by the official program, I went and updated my laptop directl
-
HP Pavilion 15 laptop: The laptop has been shutdown automatically
Hello! I've been using this laptop for almost a year now and it has never happened before with me. While I was working on the laptop, it stopped all of a sudden. Any order of work which includes the display, the light power, HDD witness, all but fan
-
Satellite A200: Need driver sound
Hello! My problem is that I need a driver for my laptop Satellite A200 (it seems that I have is not working properly, I can listen to a track only once, after that-no sounds at all.) How can I get sound driver for my laptop? Best regardsDaria
-
How to convert a pdf attachment to a word document?
I received evidence for an article that I wrote to make final corrections but when I open the file it is a set of symbols that I can't read. Please help, I'm on a deadline.
-
A DesignJet 1055 CM (model A, c6075a) would work OK with Mac OS 10.7 (Lion) or 10.8 superior? I don't have a Mac; I plead for a potential buyer of my 1055CM. The 1055CM currently has 96 MB of RAM; I could put 128 MB in. I would get "out of memory" p