DB tools Analyzer

Similar Questions

• What does this error message "a problem has been encountered a problem of personalized treatment tools manifest file (C:\Windows\system32\MSCFGTLC.» (XML)"and what can I do about it?

  For about a week now that I get a lot of 'freeze' and try to eliminate contradictory processes that cause my Vista Home Premium 32-bit w / SP1 system to "lock" onto me.

  I tried but can't do a restore effective because none of my points of store go back enough to solve the problem.

  So I try a "clean boot" as described in article http:// support.microsoft.com/kb/331796.

  My system has installed significantly since turning off half of the services non-Microsoft configured to run at startup.

  But every time I launch msconfig.exe I get this error message-"a problem when processing custom tools manifest file (C:\Windows\system32\MSCFGTLC. '"). XML ".

  It is not stop fiddling with the boot configuration, but I don't think I should get this error. Any ideas on what it is and what to do about this?

  HP Pavilion dv6700 Notebook PC AMD Turion (TM) 64 X 2 Mobile Technology TL - 60 GHz 2.00 3.00 GB RAM

  Hello ch4rlie1949,

  Run The System File Checker utility:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the appropriate Microsoft versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search .
  2. Right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue
  3. To order invites, the following line and press ENTER: sfc/scannow (Yes there is a space after sfc)

  This analysis may take some time to complete. When the analysis is complete, test to see if the problem you are experiencing is resolved. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• How to determine which files can be repaired by the System File Checker tool

  Original title: results of scan now

  I have scan now it says I have corrupted files, how to know what they are

  Hi Honey bunch,

  To determine which files can be repaired by the System File Checker tool, analyze the file journal program SFC.exe (System File Checker) generates. Follow the steps mentioned in the article below

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra M2, at wits end, trying to find the latest drivers

  Tecra m2 - PTM20A-00RTD
  Windows XP Pro

  After a reinstall of Windows, I started installing drivers, but difficulties with the 3 drivers.

  _Display Driver_
  1. pilots nvidi interrupt the display of work so I had to disable it in safe mode, now the screen and display working but not properly. When I move the screen open on the desk his jumpy. Also when I scroll down on a window in Internet Explorer Web page flickers.

  _Wireless Driver_
  2. I can't get the wireless to work. I could install the LAN driver but in the network controller device manager has the q mark yellow and under network connections, there is no wireless driver. I tried to install all the different drivers available on the Web site for different brands, but nothing helped. There is no description of the appliance under the laptop wireless. I tried the utility network driver as well, but did not work. It has certainly capacity wireless on the laptop I have a switch on the front of the laptop, when I turn it on an orange light appears.

  _Unknown Device_
  3. There is a unit marked as unknown in Device Manager. I hoped this summer the wireless, but tried to install the drivers and no luck.

  Please any help will be appreciated as I have been at this for 2 days now and its starting to get the better of me.

  Hello

  As far as I know the Toshiba Tecra M2 supports a chip nVidia graphics.
  The graphics card driver can be found on the European driver Toshiba page.

  The WiFi chip could be Cisco.
  But as far as I know that a series of laptop can be equipped with different pieces of equipment and notebook loads may be a little different. For example; the wireless network card can be different.

  Install a tool of diagnosis of equipment as mentioned by another user; You can also use an Everest home edition or Sandra (System tool).
  Such tools analyze the material and provide different details.

• THE 2N2222A reverse breakdown characteristics

  I'm tracing the characteristic of ventilation reversed for a transistor of 2N2222A CE. SCR is 80V and Ib 0uA. I'm inceasinf VDC increments of 10 v in the sweep of DC and trying to draw Ic, but I don't get distribution avalanche to Vcc > 75V. The base is open and I'm 0 to 80V for Vce, but the break never happens in the graph.

  Place the tool Analyzer of IV and open the front panel. Then click on the button simulate param to open the window settings to simulate .

  Kind regards

• error code windows update_8007371C?

  I get an WindowsUpdate_8007371C error code. How can I solve this problem?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.
  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  Try to perform scanning of auditor of file system (CFS).

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  Follow the instructions in the link below to run the SFC scan.

  http://support.Microsoft.com/kb/936212/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• 64 c error code someone knows about it?

  So what three downloads installed two could not because of error Code64C?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O the update caused the problem?

  In the meantime, try the troubleshooting steps followuing.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.
  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 3:

  Follow the instructions in the link below to reset Windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4:

  Analysis of auditor of file system (CFS) which will help you to solve the problem.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  Follow the instructions in the link below to run the SFC scan.

  http://support.Microsoft.com/kb/936212/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• How to fix the error message: xerces.dll is missing

  You try to view a dvd, but when I go to play the dvd, I get an error message: xerces.dll is missing.  How can I solve this problem?

  Hello

  1. what operating system do you use?
  2 are there any changes or updates made on the computer?
  3. are you able to read the DVD by cancelling the error message?
  4 is the issue limited only when you try to play the DVD?

  Try to play the DVD on another computer and check.

  Xerces.dll error message can be caused by corruption in the Windows System.

  Check out the link to use the System File Checker (SFC) tool to troubleshoot missing or corrupted system files in Windows 7.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should usually be your first troubleshooting step.
  http://support.Microsoft.com/kb/929833

• Games does not

  I bought a new laptop and the first night, I checked everything and everything worked well.  The next day, I tried to get on my games that came on the phone and as soon as I open ANY game, it loads quickly and never says "not responding".  I tried to turn on the game and off in the Control Panel, I tried to reboot, and I don't know what else to try to get my game to work.  Note that I speak only of the factory installed games such as Solitaire and Mahjong.

  Hi RebeccaLynn,

  Welcome to Microsoft Windows 7 answers Forum!

  Method 1.
  You can run the System File Checker and check if it helps you to open the games on your computer. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.
  To do this, follow these steps:
  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
  Infoermation more on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  Method 2. Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual.
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

• How can I fix error d3d9.dll

  How can I fix the error d3d9.dll

  Hi Antony,

  1. when exactly did you D3D9. DLL error?

  2 have had any changes made to the computer before the show?

  3. what version of Windows is installed on your computer?

  D3d9.dll problems result in one way or another by a problem with Microsoft DirectX.

  The file d3d9.dll and d3d10_1.dll is one of many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3d9.dll errors usually only appear when you use these programs.

  Important note: Do not download the file d3d9.dll individually any "DLL download site."

  Note: If you have already downloaded the d3d9.dll in these places to download DLL, remove it from everywhere where put you it and continue with the following steps.

  Step 1:

  Restart your computer if you have not yet.

  D3d9.dll error may be a stroke of luck and a simple restart could clear up completely.

  Note: the latest version of DirectX should be installed no matter if you are on Windows 7, Windows Vista or Windows XP. Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  Step 2:

  Install the update from the link below and check if the problem is resolved.

  End-user Runtime Web install DirectX
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Step 3:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 4:

  System File Checker Scan SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• What should I do to remove it bchelper.exe or replace sqlite3.dll

  What to do to remove it bchelper.exe or replace sqlite3.dll. The system does not boot under any installer

  Hello

  1. What is the exact error message received when the problem occurs?

  2 do you want to remove bchelper.exe or replace sqlite3.dll because the system does not boot under any installer?

  3. what operating system is installed on the computer?

  Method 1:

  I recommend you perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as shown in step 7 of the foregoing provide KB article.

  Method 2:

  Try the SFC (System File Checker) scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know if it helps!

• Windows Update does not work, and internet explore is slow and crashes a lot

  OK, a few months ago, I'm doomed virut32 virus, and he did a number on my system.  I know everyone says just to restore but I have about 500 GB with a value of problem on this computer and want to really do not go through the time and hassle of reinstalling all the.  Is anyway that I can uninstall internet explore and reinstall, as well as difficulty of the update thing without having to do that.  I tried all the things that windows has segested to do so far. To uninstall IE 8 and fixing this cursed thing updated.

  Either way, I am running windows vista 32-bit

  I have some computer skills so if there is anyway to do let me know.

  Either way the virus is _ it took me three days of deteling the _ it was to get rid of it that's why I'm in this problem

  Thank you inadvance

  Hi cmaag,

  Thank you for using answers Forum.

  There is not a way to uninstall Internet Explorer 7 I know.
  Is there an error message that you can post on this forum?

  What happens when you try to update?

  I suggest to use the System File Checker to search for missing and corrupt files that can cause the problem.

  The tool File Checker system to determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search .
  2. Right-click cmd in the programs list and then click run as administrator .

     If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. At prompt command, the following line, and then press ENTER:
     sfc/scannow

  Please let us know if that helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• start of issue - missing C:\Users\Chuck\AppData\roaming\wisptisr.dll reports

  From the start, I get a window stating that I'm a missing file: what is this file, and if I need how can I download it?

  Hello

  • What were the changes made before the problem occurred?
  • What version of Windows are you using?

  You can view these methods:

  Method 1:

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Slow computer. At each "troubleshooting." Nothing works, not 'problems' detected.

  My computer is slow, and none of the troubleshooting suggestions seem to help. I disabled all startup programs unnecessary, Defrag, my 'score' is a Norton 4.2 is no problem.  I have 6 GB of available ram 5.75. Yet when I operate, say, media library, it works very well for a few minutes and then slowing to the degree that if I can manage to drag the mouse to close the program, it takes several minutes to do.

  Help!

  Hello
  • What version of Windows are you using?
  • What were the changes made before the show?
  • How long have you been faced with this problem?
  You can view these methods:
   
  Method 1:
  Try the SFC scan on the computer.
  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
  Reference:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How do repopulate you the Start/Programs tab after a windows xp recovery virus attack

  After having used StopZilla to remove malware everyhthing seems to work ok except for repopulating the START/PROGRAMS.  Looking for help to get all my programs listed under programs.

  Hello

  ·         What operating system is installed on your system?

  If you are using Windows XP and programs are not listed when you click Start, and then you can perform the scan SFC to solve the problem.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747