DBMS PARALLEL EXECUTE TASK NOT VISIBLE IN DATA DICTIONARY (don't no segmentation of data)

Similar Questions

• The task bar is not visible

  title original: TASK BARR NOT VISIBLE

  MY PC TASKBAR AND START MENU IS COVERED BY THE FOGGY GLITTERING BAR. HOWEVER I CAN ACTIVATE THE MENU START AND OTHER WINOWS ICON ON WHICH I WORK BY NAVIGATION CURSOR BLINDLY. I TRIED TO FIX IT BY DIDN'T SYTEM RESTORE, BUT IT WORKED

  Try to update your display driver:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  You may need to download the latest version of the driver from your computer manufacturer "s support Web site:"
  How to upgrade Windows Vista drivers
  http://pcsupport.about.com/od/fixtheproblem/HT/updatedrvvista.htm

• Data from external hard drive not visible

  My computer has been recently infected with the virus to restore Windows. As soon as I was aware, I unplugged my network cable and a drive external hard (without using to remove the device safely), who has all my data. I then used a previous restore point to get rid of the virus, which was apparently with success, because there is no remaining trace.

  Now, the external hard drive is not visible in Explorer. Other utility programs say that the data is always there, but I can't see it or access it in the usual way. This drive worked perfectly up to this point. I tried to restart, unplug the external drive and reconnect it and using a different USB port, but so far nothing has worked.

  How can I get Vista to recognize my external drive?

  Hello

  Run the system restore will be not delete or remove the virus on the computer. System Restore helps you restore system files from your computer to an earlier point in time.

  First I suggest you to run the check, and online virus scan if no malware or viruses detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  For the problem with the external hard drive, follow the methods below:

  Method 1:

  Check if the device is detected in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, locate the drive

  Method 2:

  Run the fix it from the link below and check if it helps. Link: Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• Disk groups are not visible cluster. vSAN datastore exists. 2 guests (on 8) cluster do not see the vSAN data store. Their storage is not recognized.

  http://i.imgur.com/pqAXtFl.PNG

  http://i.imgur.com/BnztaDD.PNG

  Do not know how even tear it down and rebuild it if the disk groups are not visible. The discs are in good health on each host storage adapters.

  Currently the latest version of vCenter 5.5. Hosts running 5.5 build 2068190

  Just built. Happy to demolish and rebuild. Just do not know why it is not visible on the two hosts and the disk groups are only recognized 3 guests when more are contributing. Also strange that I can't get the disk groups to fill in vCenter. I tried two different browsers (chrome and IE).

  I have now works.

  All the identical 5.5 relies on ESXi hosts. All hosts are homogeneous CPU/sum of the prospects for disk controller / installed RAM/storage.

  I have work. I had to manually destroy all traces of the vSAN on each single to help host node:

  (1) put the hosts in maintenance mode and remove the cluster. I was unable to disable vSAN in the cluster, I made on each node host (manually via the CLI below) then disconnected web client vCenter and return to finally refresh the ability to disable on the cluster.

  esxcli vsan cluster get - to check the status of each host.

  esxcli vsan cluster drop - the vSAN cluster host.

  storage of vsan esxcli list - view records in the individual host group

  esxcli vsan storage remove-d naa.id_of_magnetic_disks_here - to remove each of the disks in the disk group (you can ignore this using the following command to remove the SSD only falling each disc in this host group).

  esxcli vsan storage remove s naa.id_of_solid_state_disks_here - this is the SSD and all the magnetic disks in a given disk group.

  After that, I was able to manually add hosts to the cluster, leave maintenance mode and configure the disk groups. Aggregated data of the vSAN data store is correct now, and everything is functional.

  Another question for those of you who still read... How to configure such as the VM storage strategy that migrates towards (or inspired) the vSAN data store will immediately resume the default storage policy, I built for VSANs?

  Thanks for anyone who has followed.

• NEW_FORM opens in the SAME session, but the data are not visible

  We have a requirement like this:
  
  -Our menu calls other forms using NEW_FORM
  -In the KEY OUTPUT of all forms of our that we call the form of menu using NEW_FORM
  - We do.
  -In the menu (form) before we call a form using NEW_FORM insert us a record in a table. We have no ' commit.
  -Normal form of an application is open (e.g. billing form)
  -We close the form of billing.
  -KEY-RELEASE of billing forms call the menu using NEW_FORM (menuform) form
  -In the Menu when new forms - form example, we must now read the inserted record and get the values of line
  -Read us the data, BUT the problem is that the line is not there.
  
  I tried this:
  -I put debug code to see if the form menu and other forms will open in the SAME session.
  - And Yes, 63325/138/79687 what we get for sid, serial #, audsid from V$ SESSION for all other forms and
  -the form of menu
  -This means that all open forms (forms app and form menu) using NEW_FORM opens in the SAME session.
  
  My question is:
  - If forms will open in THE SAME SESSION, why is - our inserted line is not visible when we come back to the
  switchboard form?
  -If we are COMMITTED to the line, then it becomes visible.
  -The problem is that we cannot make according to the requirement of the app.
  -We need her to be visible ONLY for the connected to the users session.
  -I tried using a GLOBAL temporary table and the result is the same as above.
  
  Any advice would be greatly appreciated since our application is based on the insertion of a record in the form of menu, calling from any other form of app, and when the menu form is called again this line must be visible to read.
  
  Published by: Channa 18 April 2010 22:44

  By default, the NEW_FORM did a restore when it is called, your insertion will simply be rollbacked.
  Some ideas of what you can do:
  -Using a GLOBAL TEMPORARY TABLE with ON COMMIT PRESERVE, and then issue a commit in your code after insertion
  -Use a context in the DB to store data
  -Use a package in the db to store data

• Data in my Flash drive were not visible

  Hi all!

  Yesterday I was to use my Flash drive on my Dell laptop and came across a strange question. I plugged my USB for laptop and I could not well any data in there, he was shoeing empty folder. However, when I checked used space that it showed that 9.2 GB 16 GB is used. I checked it then on my desktop, but once again the same thing. What could the question? If anyone can suggest me with solution, it will be appreciated. I have to format my USB?

  Note that my laptop is virus protected with a version update of the anti-virus software.

  Thanks in advance

  Vasihnavi.VK.7

  Hi Vasihnavi.vk.7,

  Open an command prompt and type the following command:

  attrib *. * X: - r s h/s/d (where X: is the drive letter of your flash)

  Tell me if all files displayed on the flash drive when invoke you this command.

• EL CAPITAN - when in safari Apple toolbar is not visible

  I tried this and do not find any answer to El Capitan and NOT the FULLSCREEN MODE. When I open safari, NOT full-screen, the Apple toolbar is not visible (the one with wi - fi, Apple, file edit, history etc.). The only thing visible is the bar with red, yellow and green circles. If I click on the safari window in another program, it comes back.

  Most solutions speak to exit full screen, but I'm not in full screen - I have several open small windows (safari, word, etc.) which are all on the desktop at the same time.

  I spent hours looking for this. One solution was to repair permissions, but has no El Capitan - it is built in.

  If anyone has a solution for El Capitan, I would be very grateful.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in the Preferenes system, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the United Nations to the Installer application or instructions to uninstall using the developer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Windows internal scroll of the Web site is not visible

  Address restaurant offers a menu that is not visible in FireFox, but is visible and fully functional in Internet Explorer. The menu is a drop-down window contained in the web page.

  http://fifersseafood.com/menu.html

  You can transfer files to the new profile, make sure that you do not move corrupted files, however.

  • Recovering important data over an old profile

• Re: Qosmio X 500 - USB IDE drive not visible external HARD

  Hello

  Someone was kind enough to educate myself on this problem?

  How to view the contents of an IDE hard drive connected to the USB port on my Qosmio X 500?

  -The drive is already formatted and filled with data
  -LED lights on the outer box, but the disc is not visible in the browser...

  I got my old laptop internal hard drive and I bought a box to be able to connect to the USB port on my Qosmio in order to get my data...
  What is the problem?

  The hard drive come from 32-bit Windows XP and Qosmio with seven 64-bit...

  I need to install a special driver? use a specific software? or configure specific settings?

  Thank you...

  > What is the problem?
  Who knows? If other discs hard USB can be connected properly to the Qosmio laptop, the problem might be related to the connected HARD drive.
  So I recommend this external USB with other computers.
  If the other computers will not recognize it, so the external HARD disk is a problem

  > additional power supply is probably necessary for a HARD drive
  Maybe my HDD USB requires a cable that can be connected to the two USB ports

• In any case for a column in a control tree not Visible?

  I would like to hide some data for a column in a tree control. There are string data that my application needs to store and retrieve from a column in a tree control, but it is relatively large and the user has no need to see.

  Is there a way to make a column of the tree control or cells is not not Visible?

  Thank you.

  Hmmm, I don't know if you can hide an arbitrary column (I don't see immediately a way to obtain a reference to it), but if your data is stored in the last column of the control, you can simply resize using the property number of columns. It does not solve all of the data stored in this column (you can resize the rear door and it'll be there).

  Actually, just thought of this: you can define a column activates (identify the column you'll work with), then use the Active cell > cell size > width to set the width of the cell 0, which resizes the entire column. You should be able to get with simple manipulations of here.

  Hope that helps,

• Will be performing tasks VISA with a data acquisition (Dev1) in a VI block tasks with the second DAQ (Dev2) VISA in a second VI?

  Hi all

  I have two functional screw a loop a set of read and write tasks with device 1 (NI USB-6008).  The second loop a set of writing with device 2 (another NI USB-6008) tasks.  2 VI has a massively slower than VI 1 time scale, which means that it must run in a separate loop.  Otherwise, VI 2 was created by copying and modifying 1 VI and variable names actions with him (though not, for example, global variables).  The two screws are meant to run at the same time on the same PC.

  However, if VI 1 is running at the same time as VI 2, any read operations or in writing to 1 VI 1 device are executed - but the VISA read and write operations to a serial device work.  When VI 2, all VI 1 functions work fine.

  Although I configured channels for tasks using the GUI DAQmx, I execute tasks using reading DAQmx write commands and have correctly defined the task 'create' and 'stop the task' live out the beginning and the end of my loop, respectively.

  Does anyone have suggestions for what could be the cause?  My thoughts so far:

  a. maybe it's some conflicts in the names of variables in memory between the two screws?

  b. LabVIEW for some reason any cannot read and write two devices on two separate screws?

  should c. I avoid to use DAQmx to configure these tasks (a sort of memory)?

  I know I can make it work if I have all together in a single massive VI, but for my application, it is much easier and better to do them in two separate screws.

  Thank you in advance for your help!

  In case anyone wondered, I found the solution:

  When I copied the original code for a new VI, it turns out that the structures of loop timed in the new VI had the same object name in the delivery structure of LabVIEW as timed in the original VI loop structures.  This prevents effectively regardless of the VI was executed the second execution of the timed loop.  (The serial number read/write suite to work because he was in a different timed loop.)

  I found this error when I ran the VI in execution of highlight mode and noticed that the output of 'error' on the timed loop flashed.  When I plugged it on my error stream, I found error-808, which explains the above problem.

  I have it set by right-clicking on the timed loop, change to a while loop, then change to a timed loop and plug the broken wires.  LabVIEW gave the new timed loop object a new name, and all was well in the universe.

• The program window is not visible

  Hello. I use Windows XP Professional. Two days, I am facing a problem that when I open the files of a particular extension, it appears on the taskbar, but the current window on the desktop is not visible. I tried to maximize, minimize, and restore options by clicking on the task bar, but nothing happens. When I use the move option, the cursor changes to move the cursor and is placed on the upper left corner.

  Files opened properly until recently. Someone has an idea - please help. Thank you.

  Great! It worked. Thank you, Bruce! I really appreciate your help.

• The Start button is not visible on the taskbar and items on the computer display in large.

  PC screen too big... taskbar disappeared, but I came back... but the Start button did not return

  original title: too big screen - AutoScan not visible

  Hi Molly D.,.

  Thanks for posting your query in the Microsoft Community.

  The Start button gives you easy access to the applications and programs on the computer. You have a problem with the Start button is missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer the question-

  (1) is the big screen of the computer at any time on the computer or is it limited to Internet Explorer?

  (2) that you get an error message or error code?

  (3) how have you managed to return to the taskbar?

  (4) have you done other changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you follow the steps in the article-

  http://support.Microsoft.com/kb/318027#top

  Note: Make sure that get you the computer to a Normal startup after performing all the troubleshooting steps.

  Make sure you get the computer back to Normal Mode after performing all the troubleshooting steps.

  The antivirus will try to repair bad sectors on the hard drive damaged by viruses. All the data on these areas will be lost in the process.

  Make sure that you back up the data on the computer before you continue.

  Method 2-

  You must return the item to change the size of the screen-

  Change the resolution of your monitor

  http://Windows.Microsoft.com/is-is/Windows-XP/help/Setup/change-monitor-resolution

  To increase or decrease the size of objects and text on your screen

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_use_large_or_small_fonts.mspx?mfr=true

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• I get the message that Scheduler tasks not preformed tasks does not

  Original title: error messages
  I get the message that Scheduler tasks not preformed tasks does not

  You have can not be programmed tasks, but one or several applications that you have installed probably made (without bothering to tell you).  Google is a likely culprit, but certainly not the only one.

  Most of these tasks are "phone home" search for updates of applications.  If you ask me, you're better off with tasks not running - but I'm sure that you don't like the error message at every startup.

  Rather than starting at the end with the section of the "Troubleshooting" section, begins to run and find out what's on demand - so you can decide whether you care or not that it is not performed.

  Click Start > Accessories > system tools > scheduled tasks

  The window tasks planned opens and you can see the list of tasks.  If you want the tasks to be performed, but they are not, then follow «troubleshooting» article  If you don't want the task to run, do a right click and 'delete '.

  Or, if you do not want to risk to delete something you don't know, but don't want the error of "missed tasks", right-click on a task, select properties and then uncheck the box in the tab 'Task' that says 'Enabled '.  This will give time to what the job is all about and why he could not be executed but will prevent the message "some tasks have been missed" to come whenever you start the search.