DBMS_SQL and Transaction control

Similar Questions

• Transaction and transaction AppModule Taskflow both are the same or not?

  Transaction and transaction AppModule Taskflow both are the same or not? or what are the differences between these two operations.

  Workflow transaction is different from the transaction data base (I mean the transaction returned by am.getDBTransaction ()). Each workflow is associated with a data control framework. A data control framework is the container that is associated with a workflow that contains several instances of data control. The ADF Model layer exposes the DataControlFrame interface to manage a transaction involving data controls in the framework. DataControlFrame interface exposes methods such as:

  • beginTransaction()
  • Commit()
  • Rollback()
  • createSavepoint () - Note that it is the backup point maintained by the controller of Oracle ADF and it is similar to the point of backup of database
  • isTransactionDirty()

  Task Transaction flow

  There are four transaction options that a stubborn workflow can use (notice that unbounded flow task does not support transactions):

  1. No Transaction controller: delimited task called flow does not participate in the management of transactions any controller ADF.
  2. Always Begin new Transaction: A new transaction begins when the stubborn workflow is entered, regardless of whether a transaction is in progress. The new transaction ends when the stubborn workflow stops.
  3. Always Use Existing Transaction: When it is called, the stubborn workflow participate in an existing transaction already underway.
  4. Use the existing if Possible Transaction: when it is called, the stubborn workflow is involved either in an existing transaction if there is, or starts a new transaction when the entrance to the stubborn workflow, if one does not exist.

• How to use transaction control extensions?

  Hello

  Anyone worked on transaction control extensions?

  The requirement:

  each project will have a flag associated with him; Y or N

  the user will enter his timesheet in OTL with the project

  If the project includes the flag, then it is OK to use, otherwise if the project includes the N indicator, then an error message is displayed on the screen.

  Can you please provide some examples of code?

  Thank you.

  Kind regards

  Yuvraj

  1 Add the flag of de FACTO to the project, it will be saved in attribute10. Thus in the tc_extension the x_attribute10 will be used to check.

  2. create a message, for example: XX_PA_TEST_ERROR1, in DNF Messages, when demand is projects.

  3 change the procedure for extension of client:

  CREATE OR REPLACE PACKAGE BODY APPS. PATCX AS

  PROCEDURE tc_extension)

  X_project_id NUMBER

  X_task_id number

  X_expenditure_item_date AS

  X_expenditure_type IN VARCHAR2

  X_non_labor_resource IN VARCHAR2

  X_incurred_by_person_id number

  X_quantity IN NUMBERS by DEFAULT NULL

  X_denom_currency_code IN VARCHAR2 default NULL

  X_acct_currency_code IN VARCHAR2 default NULL

  X_denom_raw_cost IN NUMBERS by DEFAULT NULL

  X_acct_raw_cost IN NUMBERS by DEFAULT NULL

  X_acct_rate_type IN VARCHAR2 default NULL

  X_acct_rate_date DATE default NULL

  X_acct_exchange_rate IN NUMBERS by DEFAULT NULL

  X_transferred_from_id IN NUMBERS by DEFAULT NULL

  X_incurred_by_org_id IN NUMBERS by DEFAULT NULL

  X_nl_resource_org_id IN NUMBERS by DEFAULT NULL

  X_transaction_source IN VARCHAR2 default NULL

  X_calling_module IN VARCHAR2 default NULL

  X_vendor_id IN NUMBERS by DEFAULT NULL

  X_entered_by_user_id IN NUMBERS by DEFAULT NULL

  X_attribute_category IN VARCHAR2 default NULL

  X_attribute1 IN VARCHAR2 default NULL

  X_attribute2 IN VARCHAR2 default NULL

  X_attribute3 IN VARCHAR2 default NULL

  X_attribute4 IN VARCHAR2 default NULL

  X_attribute5 IN VARCHAR2 default NULL

  X_attribute6 IN VARCHAR2 default NULL

  X_attribute7 IN VARCHAR2 default NULL

  X_attribute8 IN VARCHAR2 default NULL

  X_attribute9 IN VARCHAR2 default NULL

  X_attribute10 IN VARCHAR2 default NULL

  X_attribute11 IN VARCHAR2 default NULL

  X_attribute12 IN VARCHAR2 default NULL

  X_attribute13 IN VARCHAR2 default NULL

  X_attribute14 IN VARCHAR2 default NULL

  X_attribute15 IN VARCHAR2 default NULL

  X_msg_application IN OUT NOCOPY VARCHAR2

  X_billable_flag IN OUT NOCOPY VARCHAR2

  X_msg_type OUT VARCHAR2 NOCOPY

  X_msg_token1 OUT VARCHAR2 NOCOPY

  X_msg_token2 OUT VARCHAR2 NOCOPY

  X_msg_token3 OUT VARCHAR2 NOCOPY

  X_msg_count certain number NOCOPY

  X_outcome OUT VARCHAR2 NOCOPY

  p_projfunc_currency_code IN VARCHAR2 default null

  p_projfunc_cost_rate_type IN VARCHAR2 default null

  p_projfunc_cost_rate_date to DATE default null,

  p_projfunc_cost_exchg_rate NUMBER null default

  x_assignment_id IN OUT NOCOPY number

  p_work_type_id NUMBER null default

  p_sys_link_function IN VARCHAR2 default null

  By default P_Po_Header_Id in null NUMBER

  By default P_Po_Line_Id in null NUMBER

  P_Person_Type IN VARCHAR2 default null

  P_Po_Price_Type IN VARCHAR2 default null

  , P_Document_Type IN VARCHAR2 default null value - added these for R12

  P_Document_Line_Type IN VARCHAR2 default null

  P_Document_Dist_Type IN VARCHAR2 default null

  By default P_pa_ref_num1 in null NUMBER

  By default P_pa_ref_num2 in null NUMBER

  By default P_pa_ref_num3 in null NUMBER

  By default P_pa_ref_num4 in null NUMBER

  By default P_pa_ref_num5 in null NUMBER

  By default P_pa_ref_num6 in null NUMBER

  By default P_pa_ref_num7 in null NUMBER

  By default P_pa_ref_num8 in null NUMBER

  By default P_pa_ref_num9 in null NUMBER

  By default P_pa_ref_num10 in null NUMBER

  P_pa_ref_var1 IN VARCHAR2 default null

  P_pa_ref_var2 IN VARCHAR2 default null

  P_pa_ref_var3 IN VARCHAR2 default null

  P_pa_ref_var4 IN VARCHAR2 default null

  P_pa_ref_var5 IN VARCHAR2 default null

  P_pa_ref_var6 IN VARCHAR2 default null

  P_pa_ref_var7 IN VARCHAR2 default null

  P_pa_ref_var8 IN VARCHAR2 default null

  P_pa_ref_var9 IN VARCHAR2 default null

  P_pa_ref_var10 IN VARCHAR2 default null)

  IS

  BEGIN

  X_outcome: = NULL;     -Initialize output parameter

  X_msg_type: = "W";     -Parameter indicator initialization error/warning

  -Add your logic of Transaction control Extensions here

  IF X_Calling_Module = "PAXVOTCB' AND X_attribute10 = 'Y' - it will BE launched for the time sheet only. Learn more about the calling module in the Client Extensions guide

  X_msg_count: = 1;

  X_msg_type: = 'E ';

  X_Outcome: = 'XX_PA_TEST_ERROR1 ';

  END IF;

  -Add your logic of Extension of Transaction control for warnings here.

  -Always encode your last warning section. Before returning all of your

  -X_msg_type parameter to 'W' to the warnings.

  EXCEPTION

  WHILE OTHERS THEN

  -Add your logic here of exception handling

  NULL;

  END tc_extension;

  END PATCX;

  /

• I use the latest version of firefox, but cannot print all downloads. I tried to use the icon to print the downloaded form and also control P

  I tried using the icon of the downloaded form printing and also control P, but only get a blank page. I even changed my printer, but it did not help. My print menu looks the same, and I have quite everything, print only with downloaded files.

  Hello, it's currently a bug in firefox's built-in pdf viewer that is studied by our developers. in the meantime, you can use a plugin third pdf as Adobe that you can enable in the firefox options > applications -scroll down and set the default action for the portable document (pdf) format.

  How to disable the built-in PDF Viewer and use another Viewer

• Do all my purchased apps and transactions, transfer again ID after changing Apple ID?

  Hello

  I use my custom as my apple ID email address, but this year I decided to change my domain and ID.

  I've seen this before: https://support.apple.com/en-us/ht202667

  My question is:

  Do all my purchased apps and transactions, transfer again ID after changing Apple ID?

  Concerning

  Change the primary e-mail address on an account should not lose any content of the accounts - after changing your id: what to do when you have changed your Apple ID email address or password - Apple support (or disconnection across before changing preference and return with the updated later version)

  But if you are referring specifically to be able to redownload apps etc, they (and albums of music, etc.) could be removed from the Bank by the holder of the rights at any time, so you should not rely on the possibility of any element of the store to download again.

• Satellite A200-1VP - Trackpad and the control volume

  Hello

  for the first time posting here so apologies in advance if I posted this topic in the wrong place or have not included all relevant information.

  My question is about a Satellite A200-1VP I bought recently from a friend. Model number PSAE6E-08D02YEN. The laptop has been completely annihilated and installed Windows 7 Ultimate before being redeemed.

  This seems to have brought the track pad and volume control to stop working.
  Are there drivers available that I could try to help to solve this problem?

  Thanks in advance.

  Hello

  I checked on http://www.toshiba.eu/innovation/download_drivers_bios.jsp Toshiba download page, and as I can see it, your machine is fully supported for Win7 32 bit, so you need to do is install all available drivers, tools and utilities.

  What version of operating system are you using (32 or 64 bit)?
  You have installed all the drivers?

• ATI Catalyst Install Manager and Catalyst Control Center help

  I just run the Windows 7 upgrade

  report from the consultant and he said that I have to uninstall the ATI Catalyst Install Manager and Catalyst Control Center and then reinstall after upgrade...

  Could someone direct me to where I could t find these programs for Windows 7

  You should not do this. Just proceed with the upgrade installation.
  On my Satellite, I got the same message, but I just kept with upgrade.
  At the end everything went well.

• FN keys and volume control does not not on Satellite A210-131

  Hello
  I have a Satellite A210-131 for 3 days now, and the FN keys do not work. The numeric keypad using FN works fine, just the F1-12 combined with FN do nothing. I have the latest drivers and utilities from the website...

  In addition, my touch volume control works quite stupid, it takes less than 20 seconds to set and then its way too hard... I always have to go to the sound control menu to change...
  Help, please!

  Hello

  It's very strange. Usually, if you press the FN key and keep down flash cards must be indicated at the top of the screen. Please try to restart flash cards: start > all programs > TOSHIBA > utilities > restart Flash Cards.

  I don't know what the problem with the touchpad and the control volume but friends Satellite X 200 (the same tablet like on your A200) works well. Problem described is quite strange, and to be honest, I don't know.

• Equium A60-199: audio and video control buttons not working not

  Audio and video control buttons used to work for windows media player, but now they are not, I wondered if I had pressed or something changed by mistake, or maybe I need to take it to be fixed? Help, please.

  Hello

  AFAIK utility Toshiba controls must be preinstalled if you have correct functionality. Check this box on your device.

  Good bye

• Management of user accounts and Parental control in Windows 8

  Hello

  I'll post a thread on how to manage the user accounts and Parental control in Windows 8.

  A user account allows you to connect to Windows 8. By default, your computer already has a user account that you have been
  needed to create when you configure Windows 8. If you want to share your computer, you can create a separate for each Member of your household or office user account. You can also choose to associate any user account with a Microsoft account. Signature with a Microsoft account will bring all your SkyDrive files, contacts and more in the start screen. You can even connect to another computer that has Windows 8 and all your important files will be there.

  Here is a video on how to manage the user accounts and Parental control in Windows 8.

  Also, here is a document showing you how to manager Our user on Windows 8.

  If you have any questions let me know.

  THX

  I hope it's useful.

  THX

• My function keys and volume controls will no longer work. Help.

  I'm unable to use my function keys and my volume level is not displayed on the screen as before.  I think that maybe the software controlling the function keys and volume control screen is damaged or not loading.  HELP please.

  Hello

  Download and install HP Quick Launch Buttons on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

  Once the installation is complete, restart the laptop.

  OSD volume is provided by HP MediaSmart SmartMenu, so if you still don't see display, try the method in the link below and use Recovery Manager to reinstall this app - NOTE: you need at least one other application MediaSmart must be already installed, IE HP MediaSmart DVD, before you reinstall the Menu Smart.

  http://support.HP.com/us-en/document/c01868333

  Kind regards

  DP - K

  

• Save and read control values

  I have a program which is highly intensive GUI.

  It has almost 100 boxes of orders/combo of chain on the front panel.

  Once the user fills all the fields, I need to save all the values to a file.

  I don't care if the user can open/view/play the file, I just need LabVIEW to read.

  Later, it the user will need to load this file and all controls have to be filled from the file.

  From what I have seen when looking for boards of Directors.
  I heard a lot of suggestions like this that say I should

  all controls to group together, and then use the XML functions to read/write.

  I have attached a version very very simplified from what looks like the Panel front of the program.

  Do you agree with the above method? Or do you have another way you prefer?

  I would always try to automate it. Rather than treating each control manually, you can do something in this direction or change my previous example:

  

  The big advantage is that you do not have to write manually to the code for each single control and when you add controls he just continues to work. If the controls are not all channels, you can use the OpenG screws to convert a string of variant human readable.

• How can I move these indicator and the control to another page?

  How can I move these indicator and the control to another page? I page Kontrol and those on Installningar page, move!

  Or I want to hide them Kontrol page, how can I do

  Thank you

  Hi q8.

  move: select the controls, move them out of the container tab, drag them into the appropriate page of the tab container

  Hide: Terminal controls (!) right click, select "hide"...

• The hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view.

  The same thing happened to me recently: the hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view. Click on "Show common tasks in folder" but that doesn't change anything. Finally, I tried a restore without success point. No idea how to get back the link "control Panel Home"?

  Thank you very much for your support

  Alain Truchat

  Split from here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/left-hand-pane-on-Control-Panel-missing-XP-Home/6ca7e184-e2be-4709-b865-81e5c3702629#last

  Hi, Alan.

  Reset Control Panel-
   
  Press Windows key + R
   
  Type inetcpl.cpl regsvr32.exe/n/i
   
  Press ok

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.