DBSTART start the database but the instance is not started...

Hello

I use dbstart and it works fine (version is 10g R2)

I run the command dbstart and it starts the database, even I added two lines to select the version name and databsae. everything is ok. But when he finished, I connect to sqlplus and run

sqlplus "/ as sysdba"

It gives me "connection to an instance inactive."
I check ORACLE_SID and ORACLE_HOME, everything is ok. I checkd the processes using the ps - to the | grep db_name and it shows the current Oracle process

What is the reason?

Thank you

/Home/opt/Oracle/product/10.2/Db_1/

Remove the slash and try again

export ORACLE_HOME=/home/opt/oracle/product/10.2/db_1
sqlplus / as sysdba

Tags: Database

Similar Questions

Connection of the agent to the Instance is not avialable
Hello
I have a problem on
My linux is 64 bits,
I have used insatallation guide is here * "http://ivan.kartik.sk/oracle/install_ora10gR2_a.html."
I installed 10201_database_linux_x86_64.cpio.gz on OEL - 5.4
I used this public yum repository * "http://public-yum.oracle.com/public-yum-el5.repo."

[el5_u4_base]
name = Enterprise Linux $releasever U4 - $basearch - base
baseurl = http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/4/base/ $basearch.
gpgkey = http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck = 1
Enabled = 1

[el5_oracle_addons]
name = Enterprise Linux $releasever - $basearch - oracle_addons
baseurl = http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/oracle_addons/ $basearch.
gpgkey = http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck = 1
Enabled = 1

It's my error ORA-28547: failed to connect to the server, probable Oracle Net admin error (DBD ERROR: OCISessionBegin)
Jin

ORA-28547: connection to the server has failed, probable Oracle Net admin error
Cause: An error occurred during initialization of a network connection from a client process to the Oracle server: the connection has been made, but a gap is produced when trying to run the initialization protocol specific, usually due to the use of different protocols share network connection. This is usually caused by incorrect Oracle Net administrative installation for links from the database or external procedure calls. The most common specific causes are:-the connection uses a connection string that refers to an agent of the heterogeneous Services instead of an Oracle server. -The connection uses a connection string that includes a (HS =) specification.

Action: Administration check Oracle Net in one of the following ways:-when you use the TNSNAMES file. ORA or on an Oracle Names Server, make sure that the connection from the client to the ORACLE Server uses the correct service name or SID. -Check the LISTENER. ORA on the host machine from the ending point of the connection to make sure that this service name or SID refers to the correct server. -Check in the TNSNAMES file. ORA or the definition of service equivalent that the connection string does NOT contain (HS =).

Kind regards
Deepak

Connection of the agent to the Instance is not
New to Oracle, but confused with the old question. Did you find it? in past discussions with discussion unanswered.
agent connection has not seemed to be a problem before restarting.
the listener is up & running
in the Enterprise Manager have the error message:
"ORA-12505: TNS:listener is not currently of SID given in connect descriptor (DBD ERROR: OCIServerAttach).
error sqlplus: "ORA-12162: TNS: net service name is incorrectly specified.
Any clue?
/ as sysdba user name results in
"ERROR:
"ORA-12162: TNS service name: net is incorrectly specified.

ORACLE_SID you put before firing 4 lines?

Kind regards
Julien

How do I know whether or not the instance is affected?
Hello

Automatic activity or screenflow how would I know if instance has been attributed to a participant or not?

Thank you
Hello

Please find the code below and make the necessary changes in it.

Write the following code in the workflow activity of automatic screen, but before that you must pass the instanceid as an argument to the screen flow.
In the process as well as screen brand flow layer an instance instanceid as Intvariable.
Make a variable instanceidArg of the argument as a Int in the process and screenflow layer and map accordingly so that it will take the instanceid of process layer to the layer of screen flow.

Assign instanceid = id.number; in automatic business process layer but before the global interactive activity where you maped the screen flow.

Write the following code in the automatic screen workflow activity.

logMessage ("= instanceid =" + instanceid); InstanceID is the id of the instance that you had a layer of process.
ProcessService ps;
InstanceFilter instF = InstanceFilter();
ps.connectTo (url: Fuego.Server.directoryURL, user: "", password: ""); In the studio the username and password will be the same
logMessage ("Connected");

instF.create(processService: ps);
SearchScope = instF.searchScope (participantScope: ParticipantScope.ALL, statusScope: StatusScope.ONLY_INPROCESS);
is the id of the process where you want to know the id of participant assighed
instF.addAttributeTo (variable: VarDefinition.processid, comparator: Comparison.CONTAINS, value: "/" + "");
instF.addAttributeTo (variable: VarDefinition.INSTANCE_NUMBER, comparator: Comparison.IS, value: Int (instanceid));
Instances of [] Fuego.Papi.Instance = getInstancesByFilter (ps, filter: instF);

{foreach (instance in instances)
logMessage ("Assigned?:" + instance.participantId.empty);
logMessage ("instance.participantId:" + instance.participantId);

}
ps.disconnectFrom ();

In the runtime if assigned?: true which means that the instance is not assigned or false means assigned.

Sidonie

the examples are not not in the common dbca Wizard
Hi all

Oracle 10.2.0.2 on RHEL 5

I have two db instances that are currently running. They are created with scripts for creating custom db not by dbca...

Now I need to configure the control of EM database using dbca, but two instances do not appear in the wizard dbca.

I can configure EM via emca CLI but a few trinkets on this problem...

Any help please...

~ Thank you
the two instances are not listed in the wizard dbca.

You have configured/etc/oratab?

Oracle instance does not start

Hello
I set config the memory_max_target of the B instance, by change of 600M to 500M, the instance does not start.
I tried to start instance by
> sqlplus/nolog
> conn / as sysdba
> stop immediately
> startup pfile = d: \testparam.ora
then it turn to the starting instance A, may I know how to change the setting of 500 M to 600 M of the B instance memory?
Thank you.

Try simple:

sqlplus / as sysdba

create a pfile='/tmp/init.ora' of spfile;

"exit";

It should work even if the instance is down (and ASM). If you are on 12 c and your spfile is on ASM only you must specify the location of the spfile (as it appears initially in $ORACLE_HOME/dbs).

This pfile file can be edited with the correct settings and you can recreate the spfile.

.. .the file could not be created. ORA-00202:
Hello

When you create a (10.2.0) RAC database using dbca control file could not be created,
because the previous file still exists. The dbca deleted the previous database, but no doubt
did not remove all files.

What steps are recommended to do so, after the dbca has been removed and a database?

Thank you!

Published by: user545194 on May 2, 2012 02:22

Published by: user545194 on May 2, 2012 02:22
user545194 wrote:
Hello

When you create a (10.2.0) RAC database using dbca control file could not be created,
because the previous file still exists. The dbca deleted the previous database, but no doubt
did not remove all files.

What steps are recommended to do so, after the dbca has been removed and a database?

Thank you!

What is the type of shared storage? Try to delete the files manually by accessing the location.

Aman...

Database is started but the listener does not start

Hello community,
Over the weekend, a power outage took my Windows Server 2008 R2 down and my database in the same way.
I started back on the database, but I'm having some trouble from the TNS LISTENER of my 11.0.2 database.
I tried to start the service: OracleOraDb11g_home1TNSListener
but I get the following error: OracleOraDb11g_home1TNSListener service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
LSNRCTL status gives me this:
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 2: no such file or directory
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = LIPCSATT.ireq.ca) (PORT = 1521)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 61: unknown error
The departure of lsnrctl gives me this:
Z:\ > lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on August 6, 2013 07:55: 03
Copyright (c) 1991, 2010, Oracle. All rights reserved.
From tnslsnr: Please wait...
Failed to start the service, error 0.
AMT-12560: TNS:protocol adapter error
Here are my ora files:
sqlnet.ora # Network Configuration file: E:\app\da2803\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET. AUTHENTICATION_SERVICES = (NTS)
NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT, LDAP)
tnsnames.ora # Network Configuration file: E:\app\da2803\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
OROBEE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = OROBEE)
)
)
LISTENER_OROBEE =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)
)
listener.ora # Network Configuration file: E:\app\da2803\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\da2803\product\11.2.0\dbhome_1)
(= Extproc PROGRAM)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\da2803\product\11.2.0\dbhome_1\bin\oraclr11.dll")
)
)
LOGGING_LISTENER = OFF
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = LIPCSATT.ireq.ca)(PORT = 1521))
)
)
ADR_BASE_LISTENER = E:\app\da2803
TRACE_LEVEL_LISTENER = OFF
my variables are:
ALLUSERSPROFILE = C:\programdata
APPDATA = C:\Users\db4626\AppData\Roaming
BI_ORACLE_HOME = E:\app\Middleware_home\Oracle_BI1
CUSTOMERNAME = PCS00427
CommonProgramFiles = c: files
CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files
CommonProgramW6432 = c: files
COMPUTERNAME = LIPCSATT
ComSpec=C:\Windows\system32\cmd.exe
DEFLOGDIR = C:\ProgramData\McAfee\DesktopProtection
FP_NO_HOST_CHECK = NO
GRAILS_HOME=C:\grails-2.0.0
HOMEDRIVE = Z:
HOMEPATH =.
HOMESHARE = \\ireqhq\docireq\20032b\DB4626
JAVA_HOME=C:\Progra~1\Java\jdk1.6.0_26
LOCALAPPDATA = C:\Users\db4626\AppData\Local
LOGONSERVER = \\WINDSOR
NUMBER_OF_PROCESSORS = 4
ORACLE_HOME=E:\app\da2803\product\11.2.0\dbhome_1
ORACLE_SID = OROBEE
OS = Windows_NT
Path=E:\app\da2803\product\11.2.0\dbhome_1\BIN;D:\oracle\product\11.2.0\client_1
\Bin; E:\app\Middleware_home\Oracle_BI1\bin; E:\app\Middleware_home\Oracle_BI1; C:\
Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32\Windows
PowerShell\v1.0\; C:\Program Files\TortoiseSVN\bin; C:\Progra~1\Java\jdk1.6.0_26\b
in; C:\grails-2.0.0\Bin; C:\Program Files\TortoiseGit\bin; E:\app\Middleware_home\O
racle_BI1\products\Essbase\EssbaseServer\bin; E:\app\Middleware_home\Oracle_BI1\b
in; E:\app\Middleware_home\Oracle_BI1\opmn\bin; E:\app\Middleware_home\Oracle_BI1\
opmn\lib; E:\app\Middleware_home\Oracle_BI1\perl\bin; C:\apps\FME\; E:\app\da2803\p
roduct\11.2.0\dbhome_1\bin
PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_IDENTIFIER = Intel64 family 6 model 44 Stepping 2 GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 2 C 02
ProgramData = ProgramData
ProgramFiles = c: Program Files
ProgramFiles (x 86) = c: Program Files (x 86)
ProgramW6432 = C:\Program Files
PROMPT = $P$ G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC = C:\Users\Public
SESSION = RDP - Tcp #0
SystemDrive = C:
SystemRoot = C:\Windows
TEMP = C:\Users\db4626\AppData\Local\Temp\3
TMP = C:\Users\db4626\AppData\Local\Temp\3
TNS_ADMIN=E:\app\da2803\product\11.2.0\dbhome_1\NETWORK\ADMIN
USERDNSDOMAIN = IREQ.CA
USERDOMAIN = IREQHQ
USER name = db4626
USERPROFILE = C:\Users\db4626
VSEDEFLOGDIR = C:\ProgramData\McAfee\DesktopProtection
windir = C:\Windows
_PENTAHO_JAVA = C:\PROGRA~2\Java\jre7\bin\javaw
_PENTAHO_JAVA_HOME = C:\PROGRA~2\Java\jre7\bin\java
Please HELP my COMMUNITY, I'm out of resources.

Hi guys,.

I found the problem.

It was the system ORACLE_HOME variable which had 3 different paths and one of those who was referring an earlier instance of the db.

After modification, I started the start lsnrctl successfully!

Thx for your help everyone!

The instance is down, unavailable listener but database is running.
I read in a similar position in the hope that I can fix this on my own but so far... no joy.

Until recently the system responds correctly, statement that all components work properly. Recently, I've recreated a database user that has been used by our Java application to access via OIC, since then OEM reported that the Instance is down and the listner is not available. Reboot proceeds normally and does state that this anomaly after a period of time, I am able to connect via Sqlplus and our Java application successfully.

The startup.log and listener.log displays normal behavior which indicates that the database starts successfully.

Any help would be greatly appreciated.

Thank you
Todd
If you need to re-create the database, you must run EMCA to reconfigure the OEM

EMCA - deconfig dbcontrol db-rest drop
EMCA - config dbcontrol db-rest create
or

EMCA - deconfig dbcontrol db
EMCA - config dbcontrol db-rest recreate

Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

Hi all... I am a newbie with oracle database.,.
I have the problem of monitoring:
I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.
I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.
Installation-) before and during the hostname is localhost.
(-) After the installation, I changed the host name in VMCentOS
From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.
When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:
ORA-12514: TNS:listener is not currently of service requested in connect descriptor
I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!
Can someone tell me if, maybe, the problem is with the host has changed? ... and why?
P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

Hello

It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

When you install EA or there is no script that starts the database at startup.

If you wish, you can create by yourself. For example search for instructions to Google how to create script.

Kind regards

Jari

Error ORA-17503 at the start of the instance data in the CARS

Hello!
I installed Oracle 11 g SE (11.2.0.4) with CARS with 2 nodes on RedHat 7.1 with separation of roles (grid and oracle db run under different users)
Just after installation it worked, I was able to connect to the database, create a table and see it on the two nodes of the RAC.
But after restarting the servers, I can not make it works again
Maybe someone could help me understand what I am doing wrong?
When I'm trying to start a database on the vm-ora-05 node instance, I get this:
sqlplus/nolog
01:35:22 @: > connect / as sysdba
Connect to an instance is idle.
01:35:28 SYS @ racdba1: > start
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of file "+ DATA/racdba/spfileracdba.ora".
ORA-17503: ksfdopn:2 could not open the file +DATA/racdba/spfileracdba.ora
ORA-12547: TNS: lost contact
01:35:32 SYS @ racdba1: >
**********************************
Environment variables for GRID
ORACLE_HOME=/U01/app/11.2.0.4/grid
ORACLE_SID = + ASM1
Environment variables for Oracle DB
ORACLE_HOME=/U01/app/Oracle/11.2.0.4/rachome1
ORACLE_SID = racdba1
**********************************
If I check the status of the disk groups and +DATA/racdba/spfileracdba.ora asmcmd file it seems to be Ok (for me at least)
[grid of grid@+ASM1] $asmcmd
ORACLE_SID = [+ ASM1]?
The Oracle base remains unchanged with the value/u01/app/oracle
[+] ASMCMD > lsdg
State Type sector Rebal to Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files name of the block
EXTERN MOUNTED N 512 4096 1048576 5121 4725 0 4725 0 SRC /.
EXTERN MOUNTED N 512 4096 4194304 153596 151240 0 151240 0 N DATA.
EXTERN MOUNTED N 512 4096 4194304 153596 153020 0 153020 0 N FRA.
ASMCMD [+] > ls-l +DATA/racdba/spfileracdba.ora
Name of type Redund time scratched Sys
N spfileracdba.ora = > +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829
ASMCMD [+] > ls-l +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829
Name of type Redund time scratched Sys
Fichier_parametres UNPROT COARSE NOV 03 01:00 Y spfile.267.894291829
**********************************
At the same time, do not know why oracleasm scandisks/listdisks appear not all discs...
[root@vm-ora-05 Diba] # / usr/sbin/oracleasm scandisks
Reload from disk partitions: fact
Cleaning up stale ASM disks...
ASM disks scanning system...
[root@vm-ora-05 Diba] # / usr/sbin/oracleasm listdisks
[root@vm-ora-05 Diba] #.
**********************************
Here is the result of the res stat-[NULL] crsctl you and crsctl check cluster
[grid@+ASM1 grid] $crsctl res stat - you
--------------------------------------------------------------------------------
TARGET STATE SERVER STATE_DETAILS NAME
--------------------------------------------------------------------------------
Local resources
--------------------------------------------------------------------------------
ORA. CRS.dg
Vm-ora-05 online
ORA. DATA.dg
Vm-ora-05 online
ORA. FRA.dg
Vm-ora-05 online
ORA. LISTENER.lsnr
Vm-ora-05 online
ORA.asm
LINE Started vm-ora-05 online
ORA. GSD
In offline mode offline vm-ora-05
ORA.net1.Network
Vm-ora-05 online
ORA.ons
Vm-ora-05 online
--------------------------------------------------------------------------------
Cluster resources
--------------------------------------------------------------------------------
ORA. LISTENER_SCAN1. LSNR
1 vm-ora-05 online
ORA. CVU
1 vm-ora-05 online
ORA. OC4J
1 vm-ora-05 online
ORA.racdba.db
1 stop an Instance offline online
Terminating the Instance offline in LINE 2
ORA.scan1.VIP
1 vm-ora-05 online
Ora - ora. VM - 05.vip
1 vm-ora-05 online
Ora - ora. VM - 06.vip
1 in LINE THROUGH MORE out of vm-ora-05
[grid@+ASM1 grid] $crsctl check cluster
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
[grid@+ASM1 grid] $
Please help, this problem makes me crazy)

-rwxr-x---x 1 grid 209854149 28 Oct 02:10 /u01/app/11.2.0.4/grid/bin/oracle oinstall

^ ^ This x must do for setuid/setguid not x for execute

Check the docs on setuid/setguid and this note:

ASM login fails with ORA-12547: TNS: lost contact (Doc ID 1942740.1)
https://docs.Oracle.com/CD/E19683-01/816-4883/secfile-69/index.html

This should solve the problem:

/U01/app/11.2.0.4/grid/bin/Oracle chmod 6751

Concerning

Thomas

Cannot start the instance with srvctl only sqlplus
Hello

I must be missing something very obvious here... I can't launch the instances on our 2 CCR node with srvctl (fine get all others managed by cluster service/listeners/etc), but if I use sqlplus + start, all right.

Oracle Standard Edition 11.1.0.7 on Linux x 86-64
Instances: bopa1 + bopa2
Nodes: bls0114 + bls0115

The error I get is:
-----
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst:SQL * more: version 11.1.0.7.0 - Production on Sun Oct 21 16:12:59 2012
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst:Copyright (c) 1982, 2008, Oracle. All rights reserved.
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst: Enter-username: connect to an idle instance.
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst:SQL > ORA-00119: invalid specification for the system REMOTE_LISTENER parameter
bls0115:ora. Bopa.bopa2.inst:ORA - 00132: error syntax or network name not resolved "LISTENERS_BOPA."
bls0115:ora. Bopa.bopa2.inst:ORA - 01078: failure in the treatment of system settings
bls0115:ora. Bopa.bopa2.inst:SQL > disconnected
bls0115:ora. Bopa.bopa2.inst:
CRS-0215: could not start resource 'ora.bopa.bopa2.inst '.
-----
Looking lsnrctl status, I don't see that LISTENER_host name on the nodes, has something to do with it?

The cluster has been newly installed and works fine otherwise.

Published by: traore on 25 October 2012 14:25
Hello

you have defined a REMOTE_LISTENER parameter in the database which can be solved with the TNSNAMES.ora uses the clusterware.

Then 2 possibilities:

(a.) your tnsnames.ora to the dbhome contains no entry of the LISTENERS_BOPA.
(b) you use a tnsnames.ora different due to the use of the TNS_ADMIN variable. It's probably settled in the sqlplus environment, but not on the level of database/instance when clusterware tries to start.

Set it with:
setenv srvctl database d t ' "TNS_ADMIN =".

or perhaps at the level of the instance (instance of setenv srvctl - but I'm not sure it exists.) Sorry no atm 11.1 cluster to check).

Concerning
Sebastian

Start the clusterware (CRS) without starting the instance in a node

version is > 11.2.0.1
operating system: Solaris 5.10

Using

#$GRID_HOME/bin/crsctl start crs

I can start the CRS in a node. But I don't want to start the instance in this node. I just want to start the clusterware and ASM instance in this node.
No idea how I can do this?

Haven't seen this option in the Help menu for crsctl

# ./crsctl -h
Usage: crsctl add       - add a resource, type or other entity
       crsctl backup    - back up voting disk for CSS
       crsctl check     - check a service, resource or other entity
       crsctl config    - output autostart configuration
       crsctl debug     - obtain or modify debug state
       crsctl delete    - delete a resource, type or other entity
       crsctl disable   - disable autostart
       crsctl discover  - discover DHCP server
       crsctl enable    - enable autostart
       crsctl get       - get an entity value
       crsctl getperm   - get entity permissions
       crsctl lsmodules - list debug modules
       crsctl modify    - modify a resource, type or other entity
       crsctl query     - query service state
       crsctl pin       - Pin the nodes in the nodelist
       crsctl relocate  - relocate a resource, server or other entity
       crsctl replace   - replaces the location of voting files
       crsctl release   - release a DHCP lease
       crsctl request   - request a DHCP lease
       crsctl setperm   - set entity permissions
       crsctl set       - set an entity value
       crsctl start     - start a resource, server or other entity
       crsctl status    - get status of a resource or other entity
       crsctl stop      - stop a resource, server or other entity
       crsctl unpin     - unpin the nodes in the nodelist
       crsctl unset     - unset a entity value, restoring its default

Hello

You cannot give this information directly at the start of clusterware.
This option is to disable the resources, you do not want to start before running the node.
Note: You can do it from another node, to disable the startup on the node that you want to start:

In general, you can do this with
Disable srvctl $

The correct syntax depends on the type of management you used.
Managed political use of databases:

srvctl disable the d - n database

Administrator management databases:

srvctl disable instance d -i "".

Concerning
Sebastian

ORA-38760: this database instance could not turn on the flashback database

Hi guys
Without knowing it, I deleted all the files in the directory "fra" where "flashback" folder was there because of space issues. Now am facing the error.
It's my practical database.
SQL > startup
ORACLE instance started.
Total System Global Area 608174080 bytes
Bytes of size 1268920 fixed
184550216 variable size bytes
419430400 of database buffers bytes
Redo buffers 2924544 bytes
Mounted database.
ORA-38760: this database instance could not turn on the flashback database
SQL > alter flashback database;
Database altered.
SQL > SHUTDOWN IMMEDIATE;
SQL > STARTUP MOUNT
SQL > select flashback_on from database v$.
FLASHBACK_ON
------------------
RESTORE POINT ONLY
Am not able to extinguish the flame.
SQL > select * from v$ restore_point;
Select * from v$ restore_point
*
ERROR on line 1:
ORA-38701: Flashback database log 1 seq 1 wire 1:
"/ u01/fra/PROD/flashback/o1_mf_c1l5n3lq_.flb".
ORA-27037: unable to get file status
Linux error: 2: no such file or directory
Additional information: 3
SQL > select flashback_on from database v$.
FLASHBACK_ON
------------------
RESTORE POINT ONLY
I also tried to create a restore point and the flashback there.
SQL > create restore point guaranteed rspt1 flashback database;
Restore point created.
SQL > select * from v$ restore_point;
Select * from v$ restore_point
*
ERROR on line 1:
ORA-00600: internal error code, arguments: [krfg_get_keepseq_2], [1], [0], [0,]
[0], [0], [0], [0]
SQL > flashback data base to restore the point rspt1;
flashback database to restore the rspt1 point
*
ERROR on line 1:
ORA-38729: not enough flashback database data log do FLASHBACK.
Please help me in this regard.
Alert log file:
...
...
...
Mount of redo thread 1, with mount id 305866694
Sun 25 Oct 10:13:30 2015
Bytes allocated of 3981204 in the shared pool for the generation of flashback buffer
From RVWR background process
RVWR started with pid = 16, OS id = 15486
Sun 25 Oct 10:13:30 2015
Errors in the /u01/oracle/product/10.2.0/db_1/admin/prod/bdump/prod_rvwr_15486.trc file:
ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.
ORA-27037: unable to get file status
Linux error: 2: no such file or directory
Additional information: 3
Sun 25 Oct 10:13:30 2015
Database mounted in exclusive Mode
Completed: ALTER DATABASE MOUNT
Sun 25 Oct 10:13:30 2015
ALTER DATABASE OPEN
ORA-38760 marked during: ALTER DATABASE OPEN...
Trace file:
...
...
...
:() 2015-10-25 10:13:30.087 SERVICE NAME
SESSION ID: (156.1) 2015-10-25 10:13:30.087
ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.
ORA-27037: unable to get file status
Linux error: 2: no such file or directory
Additional information: 3
1. Thank you.
you experience serious problem... because usually it works very well.

Try the following:

SQL > shutdown immediate;

SQL > bootable media.

SQL > alter flashback database;

SQL > alter database backup controlfile to trace noresetlogs;

SQL > shutdown immediate;

go to the trace file generated from running (alter database backup controlfile to trace noresetlogs ;)

location of the trace file is located in the query:

SQL > select * from v$ diag_info;

It will contain the script with the SQL commands, you can rename the file with the extension ".sql".

SQL > startup nomount

SQL > @trace_file. SQL

SQL > restore database;

SQL > alter database open;

So basically you are going to recreate the files of control again...

Virtual machines are stored, but the workload is not started

I use Scheduler display 2.1 on vSphere 5.1 and 5.2 of the view. Try to start the load of local work on WIndows 7 32 bit.
When I run the test, Planner is VM, it restarts and shows that VM is saved, but nothing happens after that. For hours, I can see only
Status: [IP recorded: 1] [the workload began on machines 0] [Uploaded results-> desktop: 0]
On the virtual desktop, I see this error:
SvcRun() of the instance method failure
Traceback (most recent call changed):
File "c:\python26\lib\site-packages\win32\lib\win32serviceutil.py", line 806, in SvcRun
cottages. SvcDoRun()
File "C:\Package\serviceagent.py", line 32, of SvcDoRun
IOError: (4, "Interrupted function call")
2%: %3
Device in viewplanner.log I find this errors:
2013-04-30 09:06:26, 918 INFO-
2013-04-30 09:06:26, 918 compliance INFO
2013-04-30 09:06:26, 919 INFO-
2013-04-30 09:06:26, INFO 919 checking in the ad group: local
2013-04-30 09:06:26, 919 thinktime verification INFO: not OK
2013-04-30 09:06:26, 919 INFO verification of iterations: OK
2013-04-30 09:06:26, 919 applist verification INFO: not OK
2013-04-30 09:06:26, 919 audit INFORMATION for the Protocol (PCoIP): not OK
2013-04-30 09:06:26, 919 audit INFORMATION for (remote) mode: not OK
2013-04-30 09:06:26, 919 audit compliance for vm INFO: Image-Planer
2013-04-30 09:06:26, 991 INFO No. audit. of vcpu: OK
2013-04-30 09:06:26, 991 INFO allocated virtual memory verification: not OK
2013-04-30 09:06:26, 991 audit INFORMATION for the guest operating system: OK
2013-04-30 09:06:26, 991 WARNING compliance failed for this virtual machine: Image-plane (jump..)
2013-04-30 09:06:26, 991 INFO =.
2013-04-30 09:06:26, 991 INFO 5 compliance violations have been
2013-04-30 09:06:26, 992 INFO =.
2013-04-30 09:06:26, 992 INFO waiting for virtual machines to settle and sleep during the time scale
2013-04-30 09:06:52, 988 INFO Running query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('Temp', '192.168.147.100', '192.168.147.100', "RDP", "local_1", "passw0rd", "waiting", "2013-04-30 09:06:52", 0)
2013-04-30 09:06:52, 999 INFO Running query: SELECT * from testinfo where test_name = 'Temp' and test_state = 'pending' and ClientIP_FK = '192.168.147.100' and ServerIP_FK = '192.168.147.100. '
2013-04-30 09:06:53, 000 INFO-
2013-04-30 09:06:53, 000 INFO launch the execution plan for the run profile
2013-04-30 09:06:53, 000 INFO-
2013-04-30 09:06:53, 000 information from local workload for all virtual machines funds...
2013-04-30 09:06:53, 000 NEWS Running query: SELECT * from testinfo where ServerIP_FK = '192.168.147.100' and test_state = 'waiting '.
2013-04-30 09:06:53, the id of the test server INFO 001 is 7
2013-04-30 09:06:53, 001 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "192.168.147.100."
2013-04-30 09:06:53, 002 INFO Running query: UPDATE testinfo test_name SET = "Adobe", Protocol = "RDP", username is "local_1", password = "passw0rd", test_state = "Running", start_time is "2013-04-30 09:06:53" where test_id = 7
2013-04-30 09:06:53, 004 config of workload INFO pushing to the virtual machine: 192.168.147.100
2013-04-30 09:06:53, 004 INFO running commands remotely with args: server: 192.168.147.100, test_name: Adobe
2013-04-30 09:06:53, INFO 004 adding the callback function to get the object root remote to ipaddr: 192.168.147.100
Error unhandled offline:
Unhandled error
Traceback (most recent call changed):
Failed: twisted.internet.error.TCPTimedOutError: TCP connection has expired: 110: connection timed out.
Error unhandled offline:
Unhandled error
Traceback (most recent call changed):
Failed: twisted.internet.error.TCPTimedOutError: TCP connection has expired: 110: connection timed out.
2013-04-30 09:23:58, register a new server 305 information: 192.168.147.100
Any idea what could have gone wrong? Thank you in advance for your help!

There are only these three things, you can see again:

-The agent see Planner service is running in the desktop

-All the firewall, including the domain firewall is disabled

-The harness is able to ping the virtual desktop computer

Can you check and also download the viewplanner.log?

DBSTART start the database but the instance is not started...

Similar Questions

Maybe you are looking for