Start the clusterware (CRS) without starting the instance in a node

Similar Questions

• Cannot start the instance after adding nodes to the cluster

  Hello world
  
  After you add a third node to my group, I can't start instance. Error:
  

  ORA-01078: failure in processing system parameters
  ORA-01565: error in identifying file '+DATA/gwt/spfilexxxx.ora'
  ORA-17503: ksfdopn:2 Failed to open file +DATA/gwt/spfilexxxx.ora
  ORA-01034: ORACLE not available
  ORA-27123: unable to attach to shared memory segment
  Linux-x86_64 Error: 13: Permission denied

  Additional information:

  [grid@nodedc3 ~]$ crsctl query css votedisk
  ##  STATE    File Universal Id                File Name Disk group
  --  -----    -----------------                --------- ---------
   1. ONLINE   7887e29070204f52bfda4091940f4672 (ORCL:VOTE_OCR) [OCR_VOTE]
  Located 1 voting disk(s).
  [grid@nodedc3 ~]$ srvctl status asm -a
  ASM is running on nodedc3,nodedc2,nodedc1
  ASM is enabled.
  [grid@nodedc3 ~]$ ps -ef | grep lsnr | grep -v 'grep' | grep -v 'ocfs' | awk '{print $9}'
  LISTENER_SCAN2
  LISTENER
  [grid@nodedc3 ~]$ olsnodes -n
  nodedc1 1
  nodedc2 2
  nodedc3 3
  [grid@nodedc3 ~]$ crs_stat -t -v
  Name           Type           R/RA   F/FT   Target    State     Host
  ----------------------------------------------------------------------
  ora.DATA.dg    ora....up.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora.FRA.dg     ora....up.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora....ER.lsnr ora....er.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora....N1.lsnr ora....er.type 0/5    0/0    ONLINE    ONLINE    nodedc2
  ora....N2.lsnr ora....er.type 0/5    0/0    ONLINE    ONLINE    nodedc3
  ora....N3.lsnr ora....er.type 0/5    0/0    ONLINE    ONLINE    nodedc1
  ora....VOTE.dg ora....up.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora.asm        ora.asm.type   0/5    0/     ONLINE    ONLINE    nodedc1
  ora.cvu        ora.cvu.type   0/5    0/0    ONLINE    ONLINE    nodedc1
  ora.gsd        ora.gsd.type   0/5    0/     OFFLINE   OFFLINE
  ora.gwt.db     ora....se.type 0/2    0/1    ONLINE    ONLINE    nodedc1
  ora....network ora....rk.type 0/5    0/     ONLINE    ONLINE    nodedc1
  ora....SM1.asm application    0/5    0/0    ONLINE    ONLINE    nodedc1
  ora....C1.lsnr application    0/5    0/0    ONLINE    ONLINE    nodedc1
  ora....dc1.gsd application    0/5    0/0    OFFLINE   OFFLINE
  ora....dc1.ons application    0/3    0/0    ONLINE    ONLINE    nodedc1
  ora....dc1.vip ora....t1.type 0/0    0/0    ONLINE    ONLINE    nodedc1
  ora....SM2.asm application    0/5    0/0    ONLINE    ONLINE    nodedc2
  ora....C2.lsnr application    0/5    0/0    ONLINE    ONLINE    nodedc2
  ora....dc2.gsd application    0/5    0/0    OFFLINE   OFFLINE
  ora....dc2.ons application    0/3    0/0    ONLINE    ONLINE    nodedc2
  ora....dc2.vip ora....t1.type 0/0    0/0    ONLINE    ONLINE    nodedc2
  ora....SM3.asm application    0/5    0/0    ONLINE    ONLINE    nodedc3
  ora....C3.lsnr application    0/5    0/0    ONLINE    ONLINE    nodedc3
  ora....dc3.gsd application    0/5    0/0    OFFLINE   OFFLINE
  ora....dc3.ons application    0/3    0/0    ONLINE    ONLINE    nodedc3
  ora....dc3.vip ora....t1.type 0/0    0/0    ONLINE    ONLINE    nodedc3
  ora.oc4j       ora.oc4j.type  0/1    0/2    ONLINE    ONLINE    nodedc1
  ora.ons        ora.ons.type   0/3    0/     ONLINE    ONLINE    nodedc1
  ora.scan1.vip  ora....ip.type 0/0    0/0    ONLINE    ONLINE    nodedc2
  ora.scan2.vip  ora....ip.type 0/0    0/0    ONLINE    ONLINE    nodedc3
  ora.scan3.vip  ora....ip.type 0/0    0/0    ONLINE    ONLINE    nodedc1
  [grid@nodedc3 ~]$ crs_stat -t -v | grep ams
  [grid@nodedc3 ~]$ crs_stat -t -v | grep asm
  ora.asm        ora.asm.type   0/5    0/     ONLINE    ONLINE    nodedc1
  ora....SM1.asm application    0/5    0/0    ONLINE    ONLINE    nodedc1
  ora....SM2.asm application    0/5    0/0    ONLINE    ONLINE    nodedc2
  ora....SM3.asm application    0/5    0/0    ONLINE    ONLINE    nodedc3
  [grid@nodedc3 ~]$ ocrcheck
  Status of Oracle Cluster Registry is as follows :
           Version                  :          3
           Total space (kbytes)     :     262120
           Used space (kbytes)      :       3068
           Available space (kbytes) :     259052
           ID                       : 1523128137
           Device/File Name         :  +OCR_VOTE
                                      Device/File integrity check succeeded
  
                                      Device/File not configured
  
                                      Device/File not configured
  
                                      Device/File not configured
  
                                      Device/File not configured
  
           Cluster registry integrity check succeeded
  
           Logical corruption check bypassed due to non-privileged user

  I use Centos 5.8 and Oracle 11.2.0.3. Thanks in advance
  
  Edited by: 922736 2013-05-13 23:51

  Hello

  Sometimes, we are not able to access ASM for creation of database due to permissions on a file ' Gride_Home/bin/oracle' owner should be like this:

  -rwsr-s - x 1 grid oinstall 152462728 October 12, 2012 /u01/app/11.2.0/grid/bin/oracle

• Cannot start the instance with srvctl only sqlplus

  Hello
  
  I must be missing something very obvious here... I can't launch the instances on our 2 CCR node with srvctl (fine get all others managed by cluster service/listeners/etc), but if I use sqlplus + start, all right.
  
  Oracle Standard Edition 11.1.0.7 on Linux x 86-64
  Instances: bopa1 + bopa2
  Nodes: bls0114 + bls0115
  
  The error I get is:
  -----
  bls0115:ora. Bopa.bopa2.inst:
  bls0115:ora. Bopa.bopa2.inst:SQL * more: version 11.1.0.7.0 - Production on Sun Oct 21 16:12:59 2012
  bls0115:ora. Bopa.bopa2.inst:
  bls0115:ora. Bopa.bopa2.inst:Copyright (c) 1982, 2008, Oracle. All rights reserved.
  bls0115:ora. Bopa.bopa2.inst:
  bls0115:ora. Bopa.bopa2.inst: Enter-username: connect to an idle instance.
  bls0115:ora. Bopa.bopa2.inst:
  bls0115:ora. Bopa.bopa2.inst:SQL > ORA-00119: invalid specification for the system REMOTE_LISTENER parameter
  bls0115:ora. Bopa.bopa2.inst:ORA - 00132: error syntax or network name not resolved "LISTENERS_BOPA."
  bls0115:ora. Bopa.bopa2.inst:ORA - 01078: failure in the treatment of system settings
  bls0115:ora. Bopa.bopa2.inst:SQL > disconnected
  bls0115:ora. Bopa.bopa2.inst:
  CRS-0215: could not start resource 'ora.bopa.bopa2.inst '.
  -----
  Looking lsnrctl status, I don't see that LISTENER_host name on the nodes, has something to do with it?
  
  The cluster has been newly installed and works fine otherwise.
  
  Published by: traore on 25 October 2012 14:25

  Hello

  you have defined a REMOTE_LISTENER parameter in the database which can be solved with the TNSNAMES.ora uses the clusterware.

  Then 2 possibilities:

  (a.) your tnsnames.ora to the dbhome contains no entry of the LISTENERS_BOPA.
  (b) you use a tnsnames.ora different due to the use of the TNS_ADMIN variable. It's probably settled in the sqlplus environment, but not on the level of database/instance when clusterware tries to start.

  Set it with:
  setenv srvctl database d t ' "TNS_ADMIN =".

  or perhaps at the level of the instance (instance of setenv srvctl - but I'm not sure it exists.) Sorry no atm 11.1 cluster to check).

  Concerning
  Sebastian

• Error ORA-17503 at the start of the instance data in the CARS

  Hello!

  I installed Oracle 11 g SE (11.2.0.4) with CARS with 2 nodes on RedHat 7.1 with separation of roles (grid and oracle db run under different users)

  Just after installation it worked, I was able to connect to the database, create a table and see it on the two nodes of the RAC.

  But after restarting the servers, I can not make it works again

  Maybe someone could help me understand what I am doing wrong?

  When I'm trying to start a database on the vm-ora-05 node instance, I get this:

  sqlplus/nolog

  01:35:22 @: > connect / as sysdba

  Connect to an instance is idle.

  01:35:28 SYS @ racdba1: > start

  ORA-01078: failure in the treatment of system settings

  ORA-01565: error in the identification of file "+ DATA/racdba/spfileracdba.ora".

  ORA-17503: ksfdopn:2 could not open the file +DATA/racdba/spfileracdba.ora

  ORA-12547: TNS: lost contact

  01:35:32 SYS @ racdba1: >

  **********************************

  Environment variables for GRID

  ORACLE_HOME=/U01/app/11.2.0.4/grid

  ORACLE_SID = + ASM1

  Environment variables for Oracle DB

  ORACLE_HOME=/U01/app/Oracle/11.2.0.4/rachome1

  ORACLE_SID = racdba1

  **********************************

  If I check the status of the disk groups and +DATA/racdba/spfileracdba.ora asmcmd file it seems to be Ok (for me at least)

  [grid of grid@+ASM1] $asmcmd

  ORACLE_SID = [+ ASM1]?

  The Oracle base remains unchanged with the value/u01/app/oracle

  [+] ASMCMD > lsdg

  State Type sector Rebal to Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files name of the block

  EXTERN MOUNTED N 512 4096 1048576 5121 4725 0 4725 0 SRC /.

  EXTERN MOUNTED N 512 4096 4194304 153596 151240 0 151240 0 N DATA.

  EXTERN MOUNTED N 512 4096 4194304 153596 153020 0 153020 0 N FRA.

  ASMCMD [+] > ls-l +DATA/racdba/spfileracdba.ora

  Name of type Redund time scratched Sys

  N spfileracdba.ora = > +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829

  ASMCMD [+] > ls-l +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829

  Name of type Redund time scratched Sys

  Fichier_parametres UNPROT COARSE NOV 03 01:00 Y spfile.267.894291829

  **********************************

  At the same time, do not know why oracleasm scandisks/listdisks appear not all discs...

  [root@vm-ora-05 Diba] # / usr/sbin/oracleasm scandisks

  Reload from disk partitions: fact

  Cleaning up stale ASM disks...

  ASM disks scanning system...

  [root@vm-ora-05 Diba] # / usr/sbin/oracleasm listdisks

  [root@vm-ora-05 Diba] #.

  **********************************

  Here is the result of the res stat-[NULL] crsctl you and crsctl check cluster

  [grid@+ASM1 grid] $crsctl res stat - you

  --------------------------------------------------------------------------------

  TARGET STATE SERVER STATE_DETAILS NAME

  --------------------------------------------------------------------------------

  Local resources

  --------------------------------------------------------------------------------

  ORA. CRS.dg

  Vm-ora-05 online

  ORA. DATA.dg

  Vm-ora-05 online

  ORA. FRA.dg

  Vm-ora-05 online

  ORA. LISTENER.lsnr

  Vm-ora-05 online

  ORA.asm

  LINE Started vm-ora-05 online

  ORA. GSD

  In offline mode offline vm-ora-05

  ORA.net1.Network

  Vm-ora-05 online

  ORA.ons

  Vm-ora-05 online

  --------------------------------------------------------------------------------

  Cluster resources

  --------------------------------------------------------------------------------

  ORA. LISTENER_SCAN1. LSNR

  1 vm-ora-05 online

  ORA. CVU

  1 vm-ora-05 online

  ORA. OC4J

  1 vm-ora-05 online

  ORA.racdba.db

  1 stop an Instance offline online

  Terminating the Instance offline in LINE 2

  ORA.scan1.VIP

  1 vm-ora-05 online

  Ora - ora. VM - 05.vip

  1 vm-ora-05 online

  Ora - ora. VM - 06.vip

  1 in LINE THROUGH MORE out of vm-ora-05

  [grid@+ASM1 grid] $crsctl check cluster

  CRS-4537: Cluster Ready Services is online

  CRS-4529: Cluster Synchronization Services is online

  CRS-4533: Event Manager is online

  [grid@+ASM1 grid] $

  Please help, this problem makes me crazy)

  -rwxr-x---x 1 grid 209854149 28 Oct 02:10 /u01/app/11.2.0.4/grid/bin/oracle oinstall

  ^ ^ This x must do for setuid/setguid not x for execute

  Check the docs on setuid/setguid and this note:

  ASM login fails with ORA-12547: TNS: lost contact (Doc ID 1942740.1)
  https://docs.Oracle.com/CD/E19683-01/816-4883/secfile-69/index.html

  This should solve the problem:

  /U01/app/11.2.0.4/grid/bin/Oracle chmod 6751

  Concerning

  Thomas

• How to find the history of the instance starts/stops?

  Hello
  I'm looking for history of instance starts/stops.
  
  Thanks in advance.

  Hello

  You can find the history of start/stop of the instance in the alert log file.

  Follow the steps below.

  1 SQL > show settings back.

  / u02/oracle/admin/test_db/bdump string background_dump_dest

  It is the location of the my bdump folder.

  2. got to the location.

  3. alert ls *.

  alert_test_db.log

  Kind regards
  Ranjan

• If the instance starts due to low memory?

  Hello

  11g R2 (Linux)

  Other day one of the 3 nodes obtained ousted due to low memory

  ERR message is

  «ORA-04031: impossible to allocate 4136 bytes of memory ('pool', 'unknown object', ' sga heap (3.0) ", 'gcs dynamic r') shared»

  ' LMS0 (ospid: 8489): put an end to litigation because of the 4031 error '

  
  

  Thank you
  

  
  

  
  

  He could go down. Normally, if a user session meets an ORA-4031, the instance is assigned and the only operation in the user session fails.  However, if a process (PMON, SMON, LGWR and DBWR etc) background data dictionary operations fails, it could bring back the instance.

  Hemant K Collette

• Leave only one participant who started the instance runs workitems

  Hello
  
  I want that some work items in my case to be executed by the participant who created the instance.
  
  I tried setting participant.sticky = true in the BeginIn of the process but did not work.
  
  Please tell me how to get there.
  
  Thank you
  Elina
  
  Edited by: 22 Elina_ Ιαν 2013 03:35 μμ

  Hi Elina,

  One way to do this in 10g would be to add this logic in an automatic activity immediately preceding your Interactive activity:

  participant.next = creation.participant
  

  'Participant' and 'creation' variables are variables predefined which is created automatically when a new work item instance is created. By the "participant.next" parameter, you say engine Oracle BPM work item must only show a person (from the default value of the being in the queue of each person who plays) in the queue. Setting it to "creation.particpant", that you want to set it to the person who created the work item instance.

  Dan

• How to close the instance of Firefox launched via file/new window without killing all instances of Firefox?

  Before the last update Firefox, running on Ubuntu if it makes a difference, I was able to select close on the file menu (and if memory is also by clicking the x on the last tab) to exit an instance of Firefox open via file new window.

  With the 9.x update this no longer seems to be possible. If I choose the file altogether starting an instance that was launched via the new window, all instances of Firefox away!

  It's embarrassing because I have to leave all the instances that have been launched.

  I tried closing last tab add on, and it allows me to close the last tab content but still leaves the instance running with a blank tab.

  Is there a setting somewhere that I missed to restore the operating mode to exit the additional instances of Firefox without killing all the previous configuration?

  Thank you
  Burt

  Each window must have its own close button (big X in the right corner.)
  But it depends on the 'Theme' that you use in Ubuntu. This large X chould be a round point when you hover over the color changes. It could be on the left instead of the right site.
  This screenshot shows the close the left side, but always an X button.

  CTRL + SHIFT + W closed the window Active.
  CTRL + W closes the current tab.

• Can't start RAC instance

  Hello

  We have two-node Oracle RAC (11.2.0.3) and one instance got crashed. Could not start the instance and gave the command two start the instance below.

  srvctl start instance d-i ACCELA1 accela

  get error below

  RPRC-1013: failed to start of ora.accela.db resources

  RPRC-1064: could not start ora.accela.db of resources on the node adbcprora01

  CRS-2527: cannot start 'ora.accela.db', because it has an addiction "hard" ' ora. DG_DATAFILES. DG'

  CRS-2503: resource ' ora. DG_DATAFILES. DG' is in unknown state and must be stopped first.

  Hello

  You could try stopping and starting of the database?

  ++ srvctl stop database d accela

  ++ srvctl start database accela d

  Kind regards

  Vautrin - Oracle

• Error in the instance of SIDES-RMS: cannot call method returnTypes MBean

  Summary of the problem
  ---------------------------------------------------
  Error in the instance of SIDES-RMS: cannot call method returnTypes MBean
  
  Description of the problem
  ---------------------------------------------------
  By clicking on the "card Manager", you get the following error:
  
  Application exception: java.lang.Exception: cannot call MBean method returnTypes... at com.retek.rib.management.adapters.model.AdapterTypes.getAdapterTypesList (AdapterTypes.java: 161) at com.retek.rib.management.adapters.model.AdapterTypes.getAllAdapterTypes (AdapterTypes.java: 185) to side_adapter__manager._jspService (_rib__adapter__manager.java: 130) to com.orionserver.http.OrionHttpJspPage.service (OrionHttpJspPage.java: 59) at oracle.jsp.runtimev2.JspPageTable.service (JspPageTable.java: 462) to oracle.jsp.runtimev2.JspServlet. internalService (JspServlet.java: 594) at oracle.jsp.runtimev2.JspServlet.service (JspServlet.java: 518) at javax.servlet.http.HttpServlet.service (HttpServlet.java: 856) to the com.evermind.server.http. ServletRequestDispatcher.invoke (ServletRequestDispatcher.java: 713) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal (ServletRequestDispatcher.java: 370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java: 871) at com.evermind.server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java: 453) at com.evermind.server.http.AJPRequestHandler.run (AJPRequestHandler.java: 313) to com.evermind.server.http.AJPRequestHandler.run (AJPRequestHandler.java: 199) to $ oracle.oc4j.network.ServerSocketReadHandler SafeRunnable.run (ServerSocketReadHandler.java: 260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket (ServerSocketAcceptHandler.java: 234) to oracle.oc4j.network.ServerSocketAcceptHandler. access to $700 (ServerSocketAcceptHandler.java: 29) to at java.lang.Thread.run (Thread.java: 595)
  
  System Exception message: java.lang.Exception: cannot call method returnTypes MBean...
  
  We followed the steps described in the article "Unable to change" orion-ejb - jar.xml "and get Exception of application while Adapters tab by clicking [ID 739489.1]" without positive results.
  
  What happens in our test environment. In addition to the steps described in the article "Unable to change" orion-ejb - jar.xml "and get Exception of application while Adapters tab by clicking [739489.1 ID]", we tried to cancel their deployment and SIDES reploy but got no positive results.
  
  From Management.rib.log:
  
  2013-05-03 12:20:40, 355 DEBUG [Timer-7] org.apache.commons.beanutils.BeanUtils - copyProperty (com.retek.rib.j2ee.ErrorHospitalRetryTimerTask @1d00beb, used, SUB)
  2013-05-03 12:20:40, 360 [Timer-7] ERROR com.retek.rib.j2ee.TimerAdapterCaller - could not start timer sub_hosp_0
  java.lang.IllegalArgumentException: no positive period.
  at java.util.Timer.schedule(Timer.java:221)
  at com.retek.rib.j2ee.TimerAdapterCaller.startTimer(TimerAdapterCaller.java:126)
  at com.retek.rib.management.adapters.mbeans.external.levels.adapters.AbstractTimerAdapterMgmtBean.start(AbstractTimerAdapterMgmtBean.java:236)
  at com.retek.rib.j2ee.ManagedAdaptersFactory.getTimerDrivenElements(ManagedAdaptersFactory.java:611)
  at com.retek.rib.j2ee.ManagedAdaptersFactory.getHospMBeans(ManagedAdaptersFactory.java:197)
  to com.retek.rib.monitor.engine.MBeanRegisterServletContextListener$ 1.run(MBeanRegisterServletContextListener.java:94)
  at java.util.TimerThread.mainLoop(Timer.java:512)
  at java.util.TimerThread.run(Timer.java:462)
  2013-05-03 12:20:40, 365 [Timer-7] com.retek.rib.alert.Alert DEBUG - $Header: /cvs/Integration/RIB/Rib_Support/src/com/retek/rib/alert/Alert.java,v 1.6 2007-04-16 03:45:28 dikshih Exp $
  2013-05-03 12:20:40, 377 [Timer-7] DEBUG com.retek.rib.util.RibProperties - value (com.retek.rib.alert.impl.EmailAlertPublisher, com.retek.rib.alert.impl.JmxAlertPublisher) of key property (alertPublisherImpl).
  2013-05-03 12:20:40, 393 [Timer-7] DEBUG com.retek.rib.util.RibProperties - value (cmcasarrayp01) of key property (mail.smtp.host).
  2013-05-03 12:20:40, 393 [Timer-7] com.retek.rib.util.RibProperties DEBUG - value (25) key (mail.smtp.port) of property.
  2013-05-03 12:20:40, 394 [Timer-7] DEBUG com.retek.rib.util.RibProperties - value of property key (mail.smtp.from) ([email protected]).
  2013-05-03 12:20:40, 394 [Timer-7] DEBUG com.retek.rib.util.RibProperties - value of the property key (mail.smtp.to.list) ([email protected], [email protected]).
  2013-05-03 12:20:40, 395 [Timer-7] com.retek.rib.alert.AlertPublisherFactory - the following implementation of AlertPublisher DEBUG has been defined in sides - system.properties and will be used: com.retek.rib.alert.impl.EmailAlertPublisher
  2013-05-03 12:20:40, 397 [Timer-7] com.retek.rib.alert.AlertPublisherFactory - the following implementation of AlertPublisher DEBUG has been defined in sides - system.properties and will be used: com.retek.rib.alert.impl.JmxAlertPublisher
  2013-05-03 12:20:40, 397 [Timer-7] com.retek.rib.alert.impl.EmailAlertPublisher DEBUG - $Header: /cvs/Integration/RIB/Rib_Support/src/com/retek/rib/alert/impl/EmailAlertPublisher.java,v 1.7 2008-02-15 22:29:44 borapra Exp $
  2013-05-03 12:20:40, 398 [Timer-7] com.retek.rib.alert.impl.JmxAlertPublisher DEBUG - $Header: /cvs/Integration/RIB/Rib_Support/src/com/retek/rib/alert/impl/JmxAlertPublisher.java,v 1.3 2007/04/16 03:38:37 dikshih Exp $
  2013-05-03 12:20:40, 399 [Timer-7] DEBUG com.retek.rib.alert.AlertPublisherFactory$ AlertPublisherProxy - method invocation in AlertPublisher com.retek.rib.alert.impl.EmailAlertPublisher of implementation
  2013-05-03 12:20:40, 399 [Timer-7] com.retek.rib.alert.impl.EmailAlertPublisher DEBUG - trying to send by e-mail to [email protected], [email protected]
  2013-05-03 12:20:41, 820 [Timer-7] ERROR com.retek.rib.alert.impl.EmailAlertPublisher - send e-mail to [email protected], [email protected]
  2013-05-03 12:20:41, 822 [Timer-7] DEBUG com.retek.rib.alert.AlertPublisherFactory$ AlertPublisherProxy - method invocation in AlertPublisher com.retek.rib.alert.impl.JmxAlertPublisher of implementation
  2013-05-03 12:20:41, 823 com.retek.rib.management.adapters.mbeans.external.levels.adapters.AbstractTimerAdapterMgmtBean [Timer-7] ERROR - cannot call the start-up operation
  java.lang.IllegalArgumentException: no positive period.
  at java.util.Timer.schedule(Timer.java:221)
  at com.retek.rib.j2ee.TimerAdapterCaller.startTimer(TimerAdapterCaller.java:126)
  at com.retek.rib.management.adapters.mbeans.external.levels.adapters.AbstractTimerAdapterMgmtBean.start(AbstractTimerAdapterMgmtBean.java:236)
  at com.retek.rib.j2ee.ManagedAdaptersFactory.getTimerDrivenElements(ManagedAdaptersFactory.java:611)
  at com.retek.rib.j2ee.ManagedAdaptersFactory.getHospMBeans(ManagedAdaptersFactory.java:197)
  to com.retek.rib.monitor.engine.MBeanRegisterServletContextListener$ 1.run(MBeanRegisterServletContextListener.java:94)
  at java.util.TimerThread.mainLoop(Timer.java:512)
  at java.util.TimerThread.run(Timer.java:462)
  2013-05-03 12:20:41, 824 [Timer-7] com.retek.rib.monitor.mbeans.DynamicMBeanBase DEBUG - check if the notification is enabled for com.oracle.rib.rib - rms.sub_hosp_0.runtimeState.failed
  2013-05-03 12:20:41, 825 [Timer-7] ERROR com.retek.rib.j2ee.ManagedAdaptersFactory - no positive period.
  2013-05-03 12:20:41, 825 [Timer-7] ERROR com.retek.rib.monitor.engine.MBeanRegisterServletContextListener$ 1 - cannot call ManagedAdaptersFactory sign up.
  java.lang.RuntimeException: no positive period.
  at com.retek.rib.j2ee.ManagedAdaptersFactory.getTimerDrivenElements(ManagedAdaptersFactory.java:615)
  at com.retek.rib.j2ee.ManagedAdaptersFactory.getHospMBeans(ManagedAdaptersFactory.java:197)
  to com.retek.rib.monitor.engine.MBeanRegisterServletContextListener$ 1.run(MBeanRegisterServletContextListener.java:94)
  at java.util.TimerThread.mainLoop(Timer.java:512)
  at java.util.TimerThread.run(Timer.java:462)
  Caused by: java.lang.IllegalArgumentException: no positive period.
  at java.util.Timer.schedule(Timer.java:221)
  at com.retek.rib.j2ee.TimerAdapterCaller.startTimer(TimerAdapterCaller.java:126)
  at com.retek.rib.management.adapters.mbeans.external.levels.adapters.AbstractTimerAdapterMgmtBean.start(AbstractTimerAdapterMgmtBean.java:236)
  at com.retek.rib.j2ee.ManagedAdaptersFactory.getTimerDrivenElements(ManagedAdaptersFactory.java:611)
  ... 4 more
  2013-05-03 13:44:28, 947 DEBUG [UnDeployerRunnable Thread for sides-rms] com.retek.rib.monitor.engine.MBeanRegisterServletContextListener - contextDestroyed start.

  2013-05-03 12:20:40, 355 DEBUG [Timer-7] org.apache.commons.beanutils.BeanUtils - copyProperty (com.retek.rib.j2ee.ErrorHospitalRetryTimerTask @1d00beb, used, SUB)
  2013-05-03 12:20:40, 360 [Timer-7] ERROR com.retek.rib.j2ee.TimerAdapterCaller - could not start timer sub_hosp_0
  java.lang.IllegalArgumentException: no positive period.

  Looks like you have a typing error in the configuration of the rib-rms - adapters.xml, check in your $RIB_HOME/application-Assembly-home/side-rms.

  Should look like this, if it does, check the items before and after and see if you have errors. You can compare with the file from another environment where the error occurs and make a diff to see what is different.

  
  
  
  
  
  
  

• 11g BPM - definition of the instance of a running process instance data

  Hello
  
  What is the recommended model to interrupt the running process instance and modify an instance variable (data object)?
  
  Scenario is:
  -process instance is launched with an interactive look at the instance data
  -an event is fired, effectively the interruption of the instance and change the instance data
  -as soon as the user opens the screen for the interactive data has changed
  
  Any help much appreciated.
  
  see you soon
  
  Tony

  Hi Tony,.

  It depends on what version you have.

  If you use an earlier version or 11.1.1.5 (without the feature pack), I think that arun Pareek has an old blog on how to do it using BPEL. I can find it for you if you need.

  If you use 11.1.1.5 (with the feature pack) or more, you can use a correlation as we are used to use in 10g. Let me know if you need more information, but your process would need to have:
  1. a defined correlation that is unique
  2. a subprocess of the event which has a startup (no-the interrupting) Message event that uses the correlation (this sub-process of the event, that's what you would use from outside the process to notify the process).
  3A inside the subprocesses of the event, you would be directed to an update activity that would change the value of the variable in the main process (perhaps put to a value you pass in from outside the process via the subprocesses of the event start Message event).

  Hope it gets you going. Let me know if you need more details.

  Dan

• 11g RAC Installation fails add the instance on windows 2003 Server

  I am install 11g RAC on windows server 2003.
  Finished creating House of CRS and it looks good.
  Tried to create the database using DBCA it gives me below error. Help, please.
  
  D:\ > srvctl add instance d mgrpdb-i mgrpdb1 - n mgrpcluster-1
  PRKO-2010: error in adding instance to the node: mgrpcluster-1
  PRKR-1008: adding the instance mgrpdb1 on the mgrpcluster-1 node to the cluster database
  mgrpdb failed.
  PROC-27: error in authentication layer authentication failure [ALS error informat
  ion: category: operation [1234]: [scls_iddb_get_privgrp_id_by_name] location: [L
  [ookupAccoun] others: [LookupAccountName failed] Dep: [1332]] [1]
  
  concerning
  Musaddaq

  Salvation;

  Please check below and see its useful for your question:

  Upgrade to 10204 CRS cannot start Instance resource to aid native group 'dba' [603667.1 ID]
  PRK % error - Cause and Action required [ID 178435.1]
  Bug 3584146 - PRKR-1008 instance adding to SIR via SRVCTL [3584146.8 ID]

  It may be useful

  Respect of
  HELIOS

• The TNS service name gives preference to connect the instance that is in a mount

  OS: HPUX
  Oracle version: 11.1.0.7
  
  Why TNS service name give preference to connect the instance that is in a mode of installation and the dsiaply ' ORA-01033' as mentioned below.»
  I wanted to connect the single instance that are OPEN (no EDITING) using connection string and want to know the status of all instances using SQL query "select instance_name, status of gv$ instance. How can I achieve this?
  
  I have four-node rac and instance cluster four, one instance on each node and the State of the instances are as shown below
  
  SQL > select instance_name, status of gv$ instance;
  
  STATUS INSTANCE_NAME
  ---------------- ------------
  dtrac1 OPEN
  Dtrac4 ROAD
  dtrac3 OPEN
  dtrac2 FORCE
  
  I tried to connect using the name of the service "dtrac" (the tnsnames Details give below) any node, it gives priority to the instance that is set up and shows the sequence of error messages
  
  SQL > conn system/vcs@dtrac
  ERROR:
  ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
  
  
  WARNING: You are more connected to ORACLE.
  SQL > conn system/vcs@dtrac
  ERROR:
  ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
  
  
  SQL > conn system/vcs@dtrac
  ERROR:
  ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
  SQL >
  
  
  When I change dtrac2 instance in NOMOUNT or OPEN State, then connection correctly goes to instances that are open.
  
  TNSNAME.ora file:
  ==================
  
  
  tnsnames.ora # Network Configuration file: /oracle/db11g/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  DTRAC =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
  (LOAD_BALANCE = yes)
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  )
  )
  
  DTRAC4 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  (INSTANCE_NAME = dtrac4)
  )
  )
  
  DTRAC3 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  (INSTANCE_NAME = dtrac3)
  )
  )
  
  DTRAC2 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  (INSTANCE_NAME = dtrac2)
  )
  )
  
  DTRAC1 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  (INSTANCE_NAME = dtrac1)
  )
  )
  
  LISTENERS_DTRAC =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
  )
  
  LISTENER_DTRAC4 =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
  
  
  LISTENER_DTRAC3 =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
  
  
  LISTENER_DTRAC2 =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
  
  
  LISTENER_DTRAC1 =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))

  Too bad, I was hoping that it would work with srvctl

  [email protected] wrote:
  As you say a different way of configuring the service by referring to the favorite and attributes available for instances, but its not useful to know the instances that are open. Its helpful to separate the work to specific nodes by creating different services for different applications.

  Certainly, it only would be logical if you know in advance that you want to start an instance in editing mode and you want to bypass the connection failure. But when you know you're going to just mount a database he used to try to find later.

  I searched a bit on metalink and found notes 69546.1 which States that PMON will record with listeners the and remote start the instance, same no editing is required. Which is obviously stupid because of the error message you get when you try to connect.

  797713.1 note describes your exact problem and a solution. I'd love to quote, but I'm not sure if this is allowed or not. So instead I'll summarize what I learned: the default service that you create during the installation of first CARS behave as in one instance. As soon as the instance starts, it will register with the other. This is actually intended for you can perform administration. When you create additional services via srvctl or crs, they will somehow managed by crs and only you sign up once the instance is 'up' (I guess they mean open).
  So the solution would be to create another service through srvctl and use it for your connections.

  Bjoern

• Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

  Hello.

  I have Toshiba Satellite C55 - A (PSCGAE).

  Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

  Version 1.2.41.0 of his Studio of DTS (32/64 bit).

  When I try to open this application I have error: cannot create the instance APO.

  What should I do?

  You need to update the audio driver (I guess that your device uses IDT HD audio card)
  But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

  DTS Studio seems to be already aware...

  So I advise you to go to the Device Manager and uninstall its drivers Associates
  After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

• Backup of the instance

  I have two laptop one is Win 7 OS & other is win 8 OS. Among this way to make a backup of the instance. data should be stored in a common folder. During the particular period or simultaneously backup should do automatically. How to do?

  Or any other method of backing up the instance. Kindly help.

  Hi Muhammed,

  Thanks for posting in the Microsoft community!

  Both computers are connected to a network?

  You have created a home group?

  You can check the link below which speaks of the backup.

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  You can share data between computers using a home group.
  Please see the link below:

  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Reference:
  Homegroup
  http://Windows.Microsoft.com/en-us/Windows7/products/features/HomeGroup

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish

  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  What is a homegroup?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-HomeGroup

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.