dbTier error adcfgclone
Hi allI'm trying to run perl adcfgclone.pl dbTier but out with the following error
ERROR: Cannot run /erp/oracle/devdb/9.2.0/appsutil/clone/bin/adclone.pl
the logs show the following errors
Control of the extension of the core AIX 64-bit for Oracle...
FAILED: Please ask the patch 2896876
Could not load the sqlplus program:
Symbol resolution failed for usr/lib/libc.a[aio_64.o] because:
Symbol kaio_rdwr64 (number 0) is not exported by dependent
module/UNIX.
Symbol listio64 (number 1) is not exported by dependent
module/UNIX.
Symbol acancel64 (number 2) is not exported by dependent
module/UNIX.
Symbol iosuspend64 (number 3) is not exported by dependent
module/UNIX.
Aio_nwait symbol (number 4) is not exported by load
module/UNIX.
Symbol aio_nwait64 (number 5) is not exported by dependent
module/UNIX.
Aio_nwait_timeout symbol (number 6) is not exported by load
module/UNIX.
Symbol aio_nwait_timeout64 (number 7) is not exported by dependent
module/UNIX.
System error: error 0
Consider the symbols of section .loader with the command "clear - Tv.
egrep: cannot open /erp/oracle/devdb/9.2.0/appsutil/log/DEV_test/adcrdb_DEV.txt
.end err out.
---------------------------------------------------------------
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
getConnection()->
sDbHost: test
sDbDomain: quest - global.com
sDbPort: 1522
sDbSid: DEV
sDbUser: APPS
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@test.quest-global.com:1522:DEV
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.quest-global.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=DEV)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.quest-global.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=DEV.quest-global.com)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Connection could not be obtained; return null
Database utility - ADX finished-
RC-00118: an error occurred during the creation of database
Asked by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: control file creation failed
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:661)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:328)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:304)
to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
the impossible (Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:513)
is the IO exception: the network adapter could not establish the connection because of the pre-reqsite error missing patch 2896876 ? might suggest?
Thank you
SK
Published by: mirage on May 11, 2010 20:32
Hello
I also had a question is autoconfig to be run on the source (the two DB & APPS) before running preclone scripts?
It is not a must to run AutoConfig on nodes sources, however, I wouldn't recommend it impoverish (I used to make me run before preclone).
What is the impact of AutoConfig race / is not not running before the preclone scripts?
Depends on what changes have been made recently on the nodes of the source.
Thank you
Hussein
Tags: Oracle Applications
Similar Questions
-
Hi all
I intend to update an instance of an instance of Test development. The source and target are in the same server.
I followed the Note: 406982.1 - cloning Oracle Applications V12 with rapid Clone. Here, I am referring to
Section 4: Advanced cloning options Section
3. set up the target system.
Now my question is what do I have to use the xml system target file existing during the Post Clone using the syntax
Perl adcfgclone.pl dbTier [context of database target file]
Perl adcfgclone.pl appsTier [context APPL_TOP target file]
or
Should I start the
Perl adcfgclone.pl dbTier
Perl adcfgclone.pl appsTier
1. I'm confused here because I don't know if I'm Port already in use error if I use the method later as I will reuse the existing port numbers.
2. in addition, it would be great if you let me know how to get to the database and applications of port numbers. I know there is a rule of thumb to calculate the same.
Kind regards
Mahesh1. the question of whether I can use existing xml target file method or direct method when cloning a post?
You can do both. If you do not plan to change the DEV instantiate details (port number, directory names, SID,... etc) and then use the existing context files.
2. because I'm refreshing will the node (both source & target in the same server), I get in a 'Port already in use question' I need to reuse already configured port numbers.
Not as you want to stop the DEV instance until you refresh it, if none of the ports will be in use.
3. how to Port serial numbers? I suppose that there is a rule of thumb and a Metalink note for this but can't remember the ID. MetaLink
See my previous response.
Thank you
Hussein -
Migration of instance new server Unix AIX11i / 10g
Hi all
We intend to migrate our application/database to the new server. Please let me know how to save/fast time of this migration.
I went through the document below, but it seems that this will consume more time.
10 g Release 2 process Import/Export for Oracle Applications Release 11i [Article ID 362205.1]
Application: 11i
DB: 10G
Platform: AIX
Kind regards
MD
Option 2: What backup should be restored? Do you mean restore backup DB with APPL_TOP, COMM_TOP & OA_TOP? We need to copy anything else here? and do we not have any document to this option?
Restore all files from node level database and the application without exception.
Option 3: To copy the files, we need to copy db_top, data_top, appl_top, comm_top and oa_top. We need to copy anything else here? and do we not have any document to this option? I hope we can run level dbTier/apps adcfgclone giving the source xml files.
Copy all the files mentioned in the doc of rapid Clone. If you chose to go with this approach, then you need not file context source as quick Clone will create new ones for you (must be identical to the source ones).
Thank you
Hussein
-
Error when runnig adcfgclone.pl dbTier
HII.
I was cloning my PROD instance for an instance of Test and when you configure the server database of the target system
Perl adcfgclone.pl dbTier, Im getting the following error
..
..
..
The new context of database file was created:
* / U03/UAT/uatdb/10.2.0/appsutil/UAT_msftora2. XML *.
Logfile located at /tmp/CloneContext_10081143.log
Clone of fast running with the command:
java /u03/UAT/uatdb/10.2.0/appsutil/clone/bin/adclone.pl = Perl / u03/UAT/u atdb/10.2.0/appsutil/clone/bin/... /JRE mode = apply stage=/u03/UAT/uatdb/10.2.0/app sutil/clone/bin /... component = dbTier = CUSTOM dbctxtg=/u03/UAT/uatdb/10.2.0/ appsutil/UAT_msftora2.xml contextValidated = true showProgress method
Beginning database layer apply - Sam 8 Oct 11:44:14 2011
Logfile located at /u03/UAT/uatdb/10.2.0/appsutil/log/UAT_msftora2/ApplyDBTier_ 10081144.log
RC-50004: Fatal: error in ApplyDatabase:
Creating control files is not
ERROR when executing apply...
ERROR: Cannot run /u03/UAT/uatdb/10.2.0/appsutil/clone/bin/adclone.pl
And my log file content is illustrated below
..
..
..
---------------------------------------------------------------
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
getConnection()->
sDbHost: msftora2
sDbDomain: msftpnq.com
sDbPort: 1528
sDbSid: UAT
sDbUser: apps
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@msftora2.msftpnq.com:1528:UAT
Exception occurred: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=msftora2.msftpnq.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=UAT)))
Exception occurred: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=msftora2.msftpnq.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=UAT.msftpnq.com)))
Exception occurred: java.sql.SQLException: listener refused the connection with the following error:
ORA-12514, TNS:listener is not currently of service requested in connect descriptor
Used by the client connect descriptor was:
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=msftora2.msftpnq.com) (PORT = 1528)) (CONNECT_DATA = (SERVICE_NAME = UAT.msftpnq.com)))
Connection could not be obtained; return null
Database utility - ADX finished-
RC-00118: an error occurred during the creation of database
Asked by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: control file creation failed
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:661)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:328)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:304)
to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance (unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance (unknown Source)
the impossible (unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run (unknown Source)
can someone help me solve the problem
waiting for your answers
Thanks in advance
Edited by: 881222 October 8, 2011 12:46 AMHello
It's really great.
It is quite easy to change apps password.
Please follow the following steps:
1. stop the application services.
2. use the following FNDCPASS utility.FNDCPASS apps/apps_old_pass 0 system/system_pass SYSTEM APPLSYS apps_new_pass
... Note the 0 (zero) and enters the pass system and applications. update accordingly.
3. run autoconfig on level apps.
4 starting the services.
Its done.
Hey and kindly remember to mark this thread as answered and assigh brands of useful and correct resolver delivers brands post... :)
Happy learning.
Concerning
RanjanS -
adcfgclone.pl dbTier gets error
Hello all I did the cloning of the steps on DB and apps. preclone completed successfully on db and apps and autoconfig and I also recently created appsutil. I did everything to make the clone of post succeed .everything is good just don't post clone.
APPLICATIONS: REDHAT 4.7 32BITS 11.5.10.2
DB: ORACLE LINUX 5.3 64BITS 10.2.0.5
THE LOG CONTAINS ERRORS SUCH AS:
Running runAutoConfig...
Deleting files of type INSTALLATION
File check: /oracle/oracle/proddb/10.2.0/network/admin/TEST_emctestdb/sqlnet.ora
Treatment of the driver file: /oracle/oracle/proddb/10.2.0/appsutil/template/addbtmpl.drv
File check: /oracle/oracle/proddb/10.2.0/network/admin/TEST_emctestdb/tnsnames.ora
File check: /oracle/oracle/proddb/10.2.0/dbs/initTEST.ora
File check: /oracle/oracle/proddb/10.2.0/network/admin/TEST_emctestdb/listener.ora
From CVM mode INSTE8_SETUP
Using the context file: /oracle/oracle/proddb/10.2.0/appsutil/TEST_emctestdb.xml
Any attempt to create a back up of the file context
Created to back up the files with the name:
Oracle/Oracle/proddb/10.2.0/appsutil/out/TEST_emctestdb/01300000/TEST_emctestdb. XML
===========================================================================
Start the synchronization context file system and its models with those of the database
Database connection: impossible
Support changing context OAM function: unverified
Support OAM customization feature: unverified
File system model: /oracle/oracle/proddb/10.2.0/appsutil/template/adxdbctx.tmp
Looking for customizations to the context model
WARNING: Unable to connect to the database.
If the system is activated OAM, this can result in a loss of customizations.
You are looking for a custom to template: /oracle/oracle/proddb/10.2.0/appsutil/template/custom/adxdbctx.tmp
Custom template: not available
Found customizations: no
----------------------------------------------------------------
File system context: /oracle/oracle/proddb/10.2.0/appsutil/TEST_emctestdb.xml
Check the context file for possible updates to the database
WARNING: Unable to connect to the database.
If the system is activated OAM, this can result in a loss of customizations and context of database and file system files can be not synchronized
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Generate Tns names
##########################################################################
Classpath : /oracle/oracle/proddb/10.2.0/jdk/jre/lib/rt.jar:/oracle/oracle/proddb/10.2.0/jdk/lib/dt.jar:/oracle/oracle/proddb/10.2.0/jdk/lib/tools.jar:/oracle/oracle/proddb/10.2.0/jdbc/lib/ojdbc14.jar:/oracle/oracle/proddb/10.2.0/appsutil/java/xmlparserv2.zip:/oracle/oracle/proddb/10.2.0/appsutil/java:/oracle/oracle/proddb/10.2.0/jlib/netcfg.jar:/oracle/oracle/proddb/10.2.0/jlib/ldapjclnt10.jar
ORACLE_HOME for loading of /oracle/oracle/proddb/10.2.0 environment
Logfile: /oracle/oracle/proddb/10.2.0/appsutil/log/TEST_emctestdb/01300000/NetServiceHandler.log
Generation of the database, temperory tnsnames.ora tnsnames.ora error using templates
The instantiation of the models
tnsnames.ora instantiated
Listener.ora instantiated
adgentns.pl dating status 25600
ERRORCODE = 25600 ERRORCODE_END
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ADX database utility
---------------------------------------------------------------
getConnection()->
sDbHost: emctestdb
sDbDomain: emceg.com
sDbPort: 1522
sDbSid: TEST
sDbUser: apps
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@emctestdb.emceg.com:1522:TEST
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=emctestdb.emceg.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=emctestdb.emceg.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=TEST.emceg.com)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Connection could not be obtained; return null
Database utility - ADX finished-
RC-40201: unable to connect to the TEST database.
StackTrace:
java.lang.Exception: could not connect to the database using DBUtil
at oracle.apps.ad.clone.ApplyDatabase.checkDBConnection(ApplyDatabase.java:3414)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:524)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:328)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:304)
to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance (unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance (unknown Source)
the impossible (unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run (unknown Source)
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
getConnection()->
sDbHost: emctestdb
sDbDomain: emceg.com
sDbPort: 1522
sDbSid: TEST
sDbUser: apps
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@emctestdb.emceg.com:1522:TEST
Exception occurred: java.sql.SQLException: IO exception: Got minus one since a call to reading
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=emctestdb.emceg.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: IO exception: connection reset
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=emctestdb.emceg.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=TEST.emceg.com)))
Exception occurred: java.sql.SQLException: IO exception: connection reset
Connection could not be obtained; return null
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Creating the database TEST_emctestdb control file...
SQL * more: version 10.2.0.5.0 - Production on Wed Jan 30 00:01:47 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connect to an instance is idle.
ORACLE instance stops.
Connect to an instance is idle.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Bytes of size 2101672 fixed
427822680 variable size bytes
629145600 of database buffers bytes
Redo buffers 14671872 bytes
Created control file.
Database altered.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Database utility - ADX finished-
RC-00118: an error occurred during the creation of database
Asked by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: control file creation failed
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:661)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:328)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:304)
to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance (unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance (unknown Source)
the impossible (unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run (unknown Source
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
increased by the average listener:
You are running version 115.7 addlnctl.sh
Logfile: /oracle/oracle/proddb/10.2.0/appsutil/log/TEST_emctestdb/addlnctl.txt
From listening TEST process...
addlnctl.sh: exit with status 0
.end std out.
.end err out.
Thank youIts a test system, right?
If you wish, you can try the clone of post on appstier on target
on the other
Add your test host name in the lists of guests on production sqlnet and run autoconfig on two levels, run preclone on two levels
Make sure that the operating system installer is good user, host name, network configuration
Copy the required files from source to test
Perform the steps in the post on the target clone -
Hello
I'm setting up a clone on and 5U8 RHEL environment. When I run on the dbTier adcfgclone.pl, she went out with an error at 0%. Excerpts from the journals are as follows:
****************************************************
Profile Phase jump
Jump apply Phase
Complete RunAutoConfig...
StackTrace:
java.lang.Exception: RC-00128: error reading from file oraInst.loc
Asked by oracle.apps.ad.clone.util.OracleHomeCloner
at oracle.apps.ad.clone.util.OracleHomeCloner.getGlobalInventoryLocation(OracleHomeCloner.java:540)
at oracle.apps.ad.clone.ApplyDBTechStack.executeOUICLI(ApplyDBTechStack.java:1596)
to oracle.apps.ad.clone.ApplyDBTechStack. < init > (ApplyDBTechStack.java:462)
to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:156)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance (unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance (unknown Source)
the impossible (unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run (unknown Source)
You are looking for help, please guide
Thank you
I applied the Patch 9171650
-
failed adcfgclone.pl dbTier
Hi expert,
I have a confusion please clear.
When we run on the test instance adcfgclone.pl after preclone.pl his request password apps on db level. Here, the apps password it is necessary to give the apps password identical prod past apps.
or
We can provide the password for different applications on the test for prod apps password instance.
I ask this question because currently I m adcfgclone.pl face to make my adcfgclone not complted with success.
This isn't my 1st time of the quick clone and I did many times successfully.
suddenly, I Micaela all the time when I give the same apps on the test instance password as prod passes apps for cloning is successfully done.
but currently I have going on of applications different mention of password apps prod during adcfgclone.pl (post clone step on the test instance). and it's because of the error.
so please clear this problem.
question detials of the dbTier ApplyDBTier_11120822.log log file
#################################################################################################3
---------------------------------------------------------------
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
getConnection()->
sDbHost: testerp
sDbDomain: eigl.com
sDbPort: 1524
sDbSid: UAT
sDbUser: APPS
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@testerp.eigl.com:1524:UAT
Exception occurred: java.sql.SQLException: ORA-01017: name of user and password invalid; denied connection
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=UAT)))
Exception occurred: java.sql.SQLException: ORA-01017: name of user and password invalid; denied connection
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=UAT.eigl.com)))
Exception occurred: java.sql.SQLException: listener refused the connection with the following error:
ORA-12514, TNS:listener is not currently of service requested in connect descriptor
Connection could not be obtained; return null
Database utility - ADX finished-
RC-00118: an error occurred during the creation of database
Asked by oracle.apps.ad.clone.ApplyDatabase
##########################################################################################################
or this issue is raised for another reason.
Thanks and greetings
pritesh Rodriguez
getConnectionUsingSID()-->
JDBC URL: jdbc:oracle:thin:@testerp.eigl.com:1524:UAT
Exception occurred: java.sql.SQLException: ORA-01017: name of user and password invalid; denied connection
Try to connect using SID as ServiceName
getConnectionUsingServiceName()-->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=UAT)))
Exception occurred: java.sql.SQLException: ORA-01017: name of user and password invalid; denied connection
Yes, you must give the same apps password as it was in the source. This is because during the phase of preclone created models have the APPS source password.
If necessary, you can switch later using FNDCPASS.
-
Hi all
I got following error while cloning an instance of R12 on HP UX.
After having copied from source to target, I ran perl adcfgclone.pl dbTechStack.
error...
Start the synchronization context file system and its models with those of the database
Database connection: impossible
Support changing context OAM function: unverified
Support OAM customization feature: unverified
File system model: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
.
.
.
No download file of context and its data base models. Connection to database failed
.
.
.
[AutoConfig error report]
The following report lists the errors autoconfig met in each
execution phase. Errors are grouped by directory and by phase.
The format of the report is:
< file name > < phase > < eventually return code >
[INSTANTIATE PHASE]
AutoConfig impossible successfully to instantiate the following files:
Directory: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/install/RSU_reeldev
adcrdb.sh INSTE8
Fate of automatic configuration with State 1
RC-50014: Fatal: failed to run the auto configuration service
Asked by oracle.apps.ad.clone.ApplyDBTechStack
Kind regards
Sandeep.Hi user;
Please check:
12 adcfgclone release fails with AC-00423, RC-50014 adcrdb.sh lack of filesystem [549872.1 ID]
RC-50004: Fatal: error occurred running adcfgclone.pl dbTier RDBMS 64 bit [336875.1 ID]It may be useful
Respect of
HELIOS -
Perl adcfgclone.pl dbTier
Hi all
Please I need help, I was cloning oracle EBS to a new instance of test, but learn to run perl adcfgclone.pl dbTier he returned
$ perl adcfgclone.pl dbTier
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Applications Oracle rapid Clone
Version 12.0.0
adcfgclone Version 120.20.12000000.11
Enter the password for APPS:
Check to make... found - / usr/ccs/bin/make
Verification of the ld... found - / usr/ccs/bin/ld
Audit of cc... found - / usr/bin/cc
Control of the ar... found - / usr/ccs/bin/ar
Control of the extension of the core AIX 64-bit for Oracle...
FAILED: Please ask the patch 2896876
WARNING: Could not find all the utilities operating system required in the $PATH. Please see the above checks
but can't find the patch on the support.
Please see (perl adcfgclone.pl dbTechStack fails with: FAILURE: Please apply the patch "2896876" on AIX 5 L 64-bit (Doc ID 412655.1)) for the fix.
Thank you
Hussein
-
can we use different SID at the adcfgclone on dbTier
Hello
I want to know if adcfgclone on dbTier and appsTier can we use different SID at the adcfgclone?
Suppose that my production is PROD and I want to keep the target as a TEST so I use the SID with a different name? or is it necessary to use the same SID as the source environment?
Thank you.
Of course, you can!
You can change the SID, the location of database files, etc..
Kind regards
Bashar
-
adcfgclone.pl dbTier fail with RC-20200: Fatal: Unzip is not found.
Nice day
I find this strange because I already applied patch 9874305 .
Database has been recently improved 10.2.0.4 to 11.2.0.3 a machine of redhat5 successfully.
I'm now trying to clone the database for a redhat 6.
Any suggstions?
####################################
NetServiceHandler 115.59 started for negril at Sun Aug 17 17:00:12 this 2014
===============================================================================
[Background information]
Host: negril
Domain: pajhq.dom
The Dir: /ora/oracle/proddb/11.2.0/appsutil/out/PROD_negril/08171700
Level type: DATABASE LAYER
Get the connection...
---------------------------------------------------------------
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
getConnection()->
sDbHost: negril
sDbDomain: pajhq.dom
sDbPort: 1521
sDbSid: PROD
sDbUser: apps
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@negril.pajhq.dom:1521:PROD
Exception occurred: java.sql.SQLException: IO error: the network adapter could not establish the connection
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=negril.pajhq.dom)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=PROD)))
Exception occurred: java.sql.SQLException: IO error: the network adapter could not establish the connection
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=negril.pajhq.dom)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=PROD.pajhq.dom)))
Exception occurred: java.sql.SQLException: IO error: the network adapter could not establish the connection
Connection could not be obtained; return null
Hello
I had to manually configure the tnsnames.ora (nodename.domainname added), then start the listener. So ran
Perl level appsuser db = adbldxml.pl = apps appspasswd =
and managed to generate a good contextfile and restarted perl adcgclone dbTier to the estate.
* I also had to copy adbcrdb.sh from the source due to the
AC-00423: template file: /ora/oracle/proddb/11.2.0/appsutil/template/adcrdb.sh lack of file system.
Asked by oracle.apps.ad.autoconfig.InstantiateFile
Thank you
-
I am getting below error when running APPS pane adcfgclone
ERROR: Unable to set the classpath
/ corp_ex1/DRPM/drpmcomn/clone/bin /... /jlib/classes111.zip: missing
First create a new context for the cloned system file.
The program will ask you for information on the new system:
ERROR: creation of context not completed successfully.
Please check for errors in the /tmp/adcfgclone_29475.err file
I copied the classes111.zip from IAS_HOME to COMMON_TOP. Now I'm getting below error
First create a new context for the cloned system file.
The program will ask you for information on the new system:
ERROR: creation of context not completed successfully.
Please check for errors in the /tmp/adcfgclone_30763.err file
Hi all
Fixed a problem. Deleted and re-created a soft link for java and no other errors
-
Adcfgclone.pl dbTechStack runtime error: RC-20403
Issue of cloning database environment target during a stage preclone
Description of the problem
---------------------------------------------------
cannot continue command perl adcfgclone.pl dbTechStack /db01/oracle/TESTDB/db/tech_st/11.1.0/appsutil/TESTDB_machine.xml results in the following error message and preclone as follows:
RC-20403: the following port numbers are busy - please make sure that the ports are available and try again.
Asked by oracle.apps.ad.clone.ApplyDBTechStack
s_dbport: 1522
Don't know why I had received this error, I did this step several times before without error. Any ideas?So, are you able to use this port now?
Thank you
Hussein -
Error occurred in adcfgclone... Fatal error in FNDCPUCF in R12
Hello
When executing the adcfgclone script run error below.
The execution of script in InstantiateFile:
/A02/orapre/inst/apps/preprod_stfemapsapp01/admin/install/afcpctx.sh
script gave:
****************************************************
afcpctx.sh started sat 4 Feb 08:18:05 GMT 2012
The environment settings are...
ORACLE_HOME: /a02/orapre/apps/tech_st/10.1.2
ORACLE_SID:
TWO_TASK: preproduction
/
Download /a02/orapre/inst/apps/preprod_stfemapsapp01/appl/admin/preprod_stfemapsapp01.xml file context
Download context for /a02/orapre/inst/apps/preprod_stfemapsapp01/appl/admin/preprod_stfemapsapp01.xml file failed.
Check the log created by the FNDCPUCF program.
SQL * more: version 10.1.0.5.0 - Production on sat 4 Feb 08:18:06 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter the value 1: enter the value 2: enter the value 3: connected.
COUNT (*)
----------
96
Disconnected from the database to Oracle 10 g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
With partitioning, OLAP and Data Mining options
Download metadata file /a02/orapre/apps/apps_st/appl/ad/12.0.0/admin/template/adctxinf.tmp
Failed to download metadata files a02/orapre/apps/apps_st/appl/ad/12.0.0/admin/template/adctxinf.tmp.
Check the log created by the FNDCPUCF program.
ERRORCODE = 137 ERRORCODE_END
.end std out.
LD.so.1:: FNDCPUCF: fatal: /a02/orapre/apps/tech_st/10.1.2/lib/libclntsh.so.10.1: evil class ELF: ELFCLASS64
Killed
LD.so.1:: FNDCPUCF: fatal: /a02/orapre/apps/tech_st/10.1.2/lib/libclntsh.so.10.1: evil class ELF: ELFCLASS64
Killed
.end err out.
****************************************************
Please help me solve the problem.
I checked the error log file in $APPLCSF/folder FND_TOP/log log and $. But there was no available log file.
I'm trying to clone the application stack of the production to the test environment.
Thank you
Shrikant.Details of the source position and target of the BONES of the pl. Pl see if this Doc MOS is relevant
R12 - adcfgclone appsTier fails with the error for LD.so.1: ' bad class ELF: ELFCLASS64' [1078123.1 ID]
HTH
Srini -
11.5.9 on HR quick clone as4 errors occurred when ' perl adcfgclone appsTier
errors:
RC-50004: Fatal: error in ApplyAppsTechStack:
RC-50013: fatal: failed to instantiate the driver /u01/oradata/prodora/iAS/appsutil/driver/instconf.drv
ERROR when executing apply...
ERROR: Cannot run /u01/oradata/prodcomn/clone/bin/adclone.pl
Logfile located at /u01/oradata/prodappl/admin/PROD_ebstest/log/ApplyAppsTier_07160400.log
Fate of 8 stateful auto-configuration
RC-50013: fatal: failed to instantiate the driver /u01/oradata/prodora/iAS/appsutil/driver/instconf.drv
Asked by oracle.apps.ad.clone.ApplyAppsTechStack
StackTrace:
java.lang.Exception: RC-50013: fatal: failed to instantiate the driver /u01/oradata/prodora/iAS/appsutil/driver/instconf.drv
at oracle.apps.ad.clone.ApplyAppsTechStack.checkInstallDrvErr(ApplyAppsTechStack.java:647)
at oracle.apps.ad.clone.ApplyAppsTechStack.runInstallConfigDriver(ApplyAppsTechStack.java:573)
to oracle.apps.ad.clone.ApplyAppsTechStack. < init > (ApplyAppsTechStack.java:348)
to oracle.apps.ad.clone.ApplyAppsTier. < init > (ApplyAppsTier.java:181)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run (Thread.java)
It's my surgery:
[applprod@ebstest bin] $ perl adcfgclone.pl appsTier
Enter the password [APPS] APPS:
Apps
First create a new context for the cloned system file.
The program will ask you for information on the new system:
Provide the values required for the creation of the new file APPL_TOP context.
You want to use a virtual host for the node name target (y/n) [n]? 4 ·
Target the hostname [test]: source ebstest #The system is test.winfar.com
SID [PROD] target system database:
Target system [test] database server node: ebstest
Target database system [winfar.com] domain name:
The system target has more than one node of the server layer application (y/n) [n]? :
Is the system of target appl_top divided into several points of editing (y/n) [n]? :
Target system APPL_TOP [u01/oradata/prodappl] mount point:
Target system COMMON_TOP [u01/oradata/prodcomn] directory:
Target system 8.0.6 ORACLE_HOME [u01/oradata/prodora/8.0.6] directory:
Target system iAS ORACLE_HOME directory [u01/oradata/prodora/iAS]:
You want to preserve the test value display: 0.0 (y/n) [o]? :
Location of the JDK is installed on the system target [usr/opt/jdk1.3.1]:
You want to keep the values of source on the system system port target (y/n) [o]? :
RC-40201: unable to connect to the Production database.
Context of clone uses the same mechanism of pool of port as quick installation
After selecting a basin of the port, Clone context will validate the availability of port.
Enter the number of the port pool [0-99]:
1
Audit of the port pool 1
fact: Port 1 pool is free
Web listening port is 8001
Information available at /u01/oradata/prodappl/admin/out/PROD_ebstest/portpool.lst complete port
RC-40201: unable to connect to the Production database.
Target system proxy hostname [test.winfar.com]:ebstest.winfar.com
Target system [80] proxy port: 8000
Backup of /u01/oradata/prodappl/admin/PROD_ebstest.xml to /u01/oradata/prodappl/admin/PROD_ebstest.xml2.bak
Create the new file APPL_TOP context of:
/U01/oradata/prodappl/ad/11.5.0/admin/template/adxmlctx.tmp
The new context APPL_TOP file was created:
/ U01/oradata/prodappl/admin/PROD_ebstest. XML
Logfile located at /u01/oradata/prodcomn/clone/bin/CloneContext_07160358.log
Clone of fast running with the command:
Perl java /u01/oradata/prodcomn/clone/bin/adclone.pl = / u01/oradata/prodcomn/clone/bin /... /JRE mode = apply stage = / u01/oradata/prodcomn/clone/bin /... component = appsTier = CUSTOM appctxtg=/u01/oradata/prodappl/admin/PROD_ebstest.xml contextValidated = true showProgress method
Start application layer apply - Thu Aug 16 16:00:48 2009
Logfile located at /u01/oradata/prodappl/admin/PROD_ebstest/log/ApplyAppsTier_07160400.log
RC-50004: Fatal: error in ApplyAppsTechStack:
RC-50013: fatal: failed to instantiate the driver /u01/oradata/prodora/iAS/appsutil/driver/instconf.drv
ERROR when executing apply...
ERROR: Cannot run /u01/oradata/prodcomn/clone/bin/adclone.pl
Check the log file.
I had checked some questions like that, and I found that there may be something wrong with cache system source PORTAL of Note.372911.1
Could you help me to check it out.
I woule be appreciate your response.Hello
Please consult the following and see if it helps.
Note: 456017.1 - adcfgclone.pl fail on Apps layer with "tnsnames.ora INSTE8" and "java.lang.Exception: RC-50013: fatal: failed to instantiate the driver."
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=456017.1Note: 419671.1 - error: AC-00444 nncadvan.htm (permission denied) running 'perl adcfgclone.pl appsTier.
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=419671.1Kind regards
Hussein
Maybe you are looking for
-
iPhone apps on iPad with iOS 9: miniature camera roll white
Hello people, When you use applications with the latest iOS iPad iPhone 9 film shows only white tiles. Regardless if zoom level 1 x or 2 x - such as a screenshot of the app Tinder, but it applies to a bunch of applications native iPhone trying to use
-
IPod 6th generation. Download the milder dishes of iTunes by Apple. failure why he isrestoring
-
I have a request from the Hotmail team to verify my account or it will be deleted... Is it legitimate since they ask my name, username and password?
-
Original title: windows does not I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs What can I do?
-
Gateway RV320 ping RV320 VPN question
Hi all I have 3 x RV320 with the latest firmware to all configure to use VPN from gateway to gateway in a configuration of spokes and hub. On all RV320, I can see the connected state of the VPN tunnels. However, I can't do a ping to gateway to gatewa