Dc7800: "display driver igfx stopped responding and was recovered with a success." for Windows7
Hello
Dc7800 series systems are in error - "display driver igfx stopped responding and has successfully recovered. Windows 7 "with Windows7 operating system
The systems provided with Windows Vista and we have later upgraded to Windows 7. Now 2/3 systems many DC7800 systems that we have in our office are showing the above error and the screen turns off for 2/3 seconds. We have reloaded OS but still the problem persits.
There is no display driver for Windows 7 for DC7800 HP driver/software downloding site. Application of detection of driver of Intel found that this latest version of the driver is installed.
Ran windows memory diagnostic tool and has not found any error.
Can anyone help?
Thank you
Hello:
Try this driver for 32 bit OS:
Try this driver for the 64 bit OS:
Paul
Tags: HP Desktops
Similar Questions
-
How can I fix this problem display driver igfx stopped responding and has recovered?
No matter what time do anything in 'normal' mode my screen flashes black, and an error comes up saying display driver igfx stopped responding and has successfully recovered. Sometimes it gets so bad that my computer will freeze and close. This has happened for about two months now. I had to keep my computer in "safe mode with network. This problem does not occur in "safe" mode What should I do to solve this problem. As soon as possible, I take online courses, and a major problem.
I have a HP Pavolion dv4-1120us
Vista Home Premium
The problem can be solved by following these steps .
-
Help, please. On the next computer I have terrible crash problems while playing WoW. Critical error WOW States: "not enough memory to process command - 11 538 bytes requested."
When running 3D Mark Vantage I can reproduce the "display driver nvlddmkm stopped responding and was recovered successfully.
Processor Intel Core i7 CPU 920 @ 2.67GHz
Details of the component
NVIDIA GeForce GTX 295 graphics
4 095 MB total graphics memory available graphic set
Main hard drive 53GB free (140 GB Total)
64 bit version with service PAC 2 Vista UltamateForums are full of posters indicating that it is a Vista / Nvidea incompatibility problem that has been around for years and that the problem is not treated. I tried everything I can think of, check the RAM to download new drivers, to the removal of unnecessary records of WOW. I reinstalled everything, run each diagnostic tool in the plane, patches downloaded, checked for the virus and still no help.
I am currently able to play WOW on the smaller graphics settings and avoid cities. With this level of equipment, it's a shame, really, I should be able to do more.
Did anyone have any suggestions of what I can do at this point?
OK, I did a lot of research on this issue. The problem lies in the Blizzard, most of the time.
World of Warcraft is a set of 32 bits. Because it is strictly 32 bit, it only has access to 2 gigabytes of memory. Windows manages the other 2 giga of addressable space.
Most of the developers of games flag their games before the compile time to use larger amounts of memory. Blizzard doesn't do this, because their anti-cheat system and third-party tools rely on the 32-bit addressing and address 64-bit would mean that they must all be rewritten.
What happens in the game, is that your footprint large capacity memory card is mapped in the game. In general, it is when your settings are high, because it uses the most memory, which explains why the game is playable when you use minimal settings. Given that the configuration of your particular graphics card uses close to 2 gig of RAM itself, quickly force you the game short of memory addressable space.
To resolve this problem, you may be able to play with reduced settings. Reduce your resolution is usually the best way to limit the use of memory, since it increases exponential use RAM when you increase the resolution. You might have to play with different parameters. You can open the upward Task Manager and monitor the use of your memory WoW game to see where the sweet spot is maintaining your memory under control.
Blizzard will have to make the difficult choice to eventually allow access extended memory. More people are buying equipment like yours, this problem will be more widespread.
-
original title: display driver nvlddmkm stopped responding and has recovered successfully after sleep, then BSOD.
Well, if not some time ago, we got a Nvidia GeForce 240GT video card. We used an ATI Radion 3460 I think and it worked normally. Then when we got the nVidia card, we started to see the problems. Occasionally, he would show the blue screen of death. I tried to reproduce the error and came to an interesting conclusion. Whenever I put the computer in sleep mode turn off mode 'sleep', I wait a bit and then the login screen appears. I connect and it shows me the "display driver nvlddmkm stopped responding and was recovered successfully. Then after that, if I go on YouTube and try to watch a video, the computer hangs and a BSOD would leap upward. I am angry. I used "standby mode" so and with the new map video, everything got worse. I tested this problem on Windows Vista and 7. And btw, the drivers are up-to-date, I made sure the driver nvlddmkm himself file is up-to-date, and temperatures are perfect.
update the drivers from NVIDIA. Also make sure that your power supply is powerful enough to handle the new nVIDIA card. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
P70 Intel HD 530 display driver igfx stopped responding and has successfully recovered.
Once or twice during the day I get a black screen and then a notification Windows 10 saying "display driver stopped responding and has recovered.
In which case the log, the following event is recorded: "display driver igfx stopped responding and has successfully recovered."
I updated the Intel graphics driver via windows 20.19.15.4352 mechanism and the frequency of the message seems to be reduced. However I understand 3-5 times a day.
Go to control PANEL, then select MANAGER of DEVICES. Then select the selection of GRAPHICS cards. You should see Intel(r) HD GRAPHICS 530 and NVIDIA QUADRO M600M. For each, open (by double clicking), select UPDATE DRIVER and select SEARCH AUTOMATICALLY for UPDATED DRIVER SOFTWARE. There should be updates for each.
When both are installed, stop and restart. After the reboot, you may need to go into control PANEL, then select NVIDIA control PANEL. Select MANAGE 3D SETTINGS. Under FAVORITE the CPU GRAPH, select SELECTION AUTOMATIC, and then click APPLY. (If you are still running on AC you can choose NVIDIA PROCESSOR HIGH PERFORMANCE).
-
Dell XPS 15 "display driver igfx stopped responding and has successfully recovered."
Hello
About 3 - 4 times a day while working, my computer hangs for 1 - 2 seconds and I get a message saying my display driver crashed and has fully recovered. In the event log, I see a warning saying:
"Display driver igfx stopped responding and has successfully recovered."
I have a Dell XPS 15 10 Windows running with the latest updates. It has a Intel (r) HD 4600 Graphics and an NVIDIA GeForce GT 750 M graphics card. I also use a Dell D3100 3 USB docking station, however I notice the issue with and without this used.
I tried to install the latest drivers for the NVIDIA card. I am currently using "10.18.13.5906".
Any ideas on how to solve this problem?
See you soon,.
Mark
Latest drivers work for me, Yes.
-
Display driver igfx stopped responding and has recovored.
I installed some updates 'important' my computer keeps pushing me to install today and shortly after my screen started going black, for 5 to 30 seconds at a time at random intervals. After returning to normal display mentions a "display driver igfx", I would like to repair or replace this driver if possible, but don't know how. If there is anything I can do I appriciate it.
Hello Wodahsdrol,
You should try to update the drivers for your video card.
I suggest that you go to your computer manufactuers website and download the latest drivers for your video card.
See this article which will give you different options to upgrade the drivers:
If nothing works, try to uninstall and reinstall the graphics card.
========================
1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
2. expand "Graphics cards", double-click the entry to the display device.
3. click on the "Driver" tab, click "Uninstall".
4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
5 remove the related entries the display device.Reinstall the driver with your driver CD.
Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
Display driver atikmdag stopped responding and has recovered.
Ok
So I've had this problem for a while now... Whenever I try to play a game like Eve or Counter Strike Source, it will freeze not long after the opening of the game (to sleep that I don't get to log in CSS after that I opened a server). I studied the problem of many things, tried everything and nothing really seems to work for me. I've updated all my drivers, made of many quickfixes on many sites. What solutions have all come with? Any help is greatly appreciated. (I have 4 GB of ram, processor intel duo core, ATI Radeon 3100, on Satellite L555D with windows 64 bit premium).Hello
Don't forget to check with the AMD/ATI support & forums as you're probably not alone with the question.
Also check with the Game makers' Support and Forums that these problems could be known.Drivers and Support ATI
http://support.AMD.com/us/pages/AMDSupportHub.aspxAMD/ATI game forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11Reinstall the drivers for your video - do not use the scan for drivers - update
manually using the methods below. Be sure and download the Versions of Catalyst.ATI drivers
http://support.AMD.com/us/gpudownload/pages/index.aspxIt's my generic how updates of appropriate driver: (use this for video drivers)
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Display driver igfx stopped responding and has successfully recovered.
OK I play world of warcraft (obviously?) and every time I log in it does not show were I'm in the game the screen goes black and then my screen says 'no signal' if I don't hit the windows key or alt tab it will freeze, then it will goto this blue screen where it says "windows has encountered an error of display and restarts." There is much more on the blue screen, but I don't get enough time to read it because the computer stops... to be honost its rly... me off and I would rly appreciate any help to solve this annoying problem ty!
If a this manufacturers site graphics card driver, for example Nvidia / Ati etc. If on board from the motherboard manufacturers site
IGFX tells me that it is an Intel hraphic chip:
http://Downloadcenter.Intel.com/default.aspx
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
display driver nvlddmkm stopped responding and has successfully recovered
So, about a week ago I checked the nVidia website to see if there was no news available drivers for my card (XFX GeForce 9600 GSO) and there was. Installiation was simple then a restart. After reboot, I thought that I would play Call of Duty 4 and after 5-10 minutes of play my screen goes black and it appears with a small warning sign in the region of noticfication "display driver nvlddmkm stopped responding and was recovered successfully."
The pc will be a blue screen with a nvlddmkm.sys error or it goes off and nothing will workforcing me to turn off by the power button. I had never met moyenessentiel before you install the latest drivers.After looking for some fix on google, I couldn't findsomething solid. So I opened the Device Manager and clicked on graphics cardsand redeployed the pilot.Still no luck. Most of the games I played this error still appeared. I tried all the drivers on the nVidia sitethat are suitable for my card. The drivers on thecd also included witht that card and they do not seem to work either.I installed the drivers with Windows Live OneCare disabled, disabled UAC and nothing runningin the background, such as recommended by nVidia. Still nothing works. I have the Sims 3, Call of Duty 4,Call of duty: World at War, Halo 2 for Vista and HAWX installed. The only onegame I havn't had the error is H.A.W.XI am running Windows Vista Home Premium authentic with all latest updates from Windows Update.Any ideas? This leads me through the wall...Hello PaulFordge,
Hello go to the temperature settings in the nivida, here's an image Control Panel.,.
What is your idle temp? If you can load a game in windowed mode and have the temperature to be measured to see if the window is active, what is the temperature under load?
Thank you
jlluitj
Josh Luitjens - self-taught computer tech. -
Driver IGFX stopped responding and the screen is now healed
Hello!
I have a problem with games on my Inspiron 1525. I found subjects with this problem but can't find any idea how to solve this problem.
"Driver Igfx stopped responding and the screen has now recovered" - this error pops up when I play 3D games.
Video: Mobile Intel® 965 Express Chipset Family.
Latest drivers from dell.com are installed: 7.14.10.1409.
Of the intel.com, I downloaded driver v7.14.10.1472 but cannot install it.
How can I solve this problem?
p.s. DirectX 10 installed.
-
I constantly get a message error display driver has stopped working and has recovered.
I have my getting an error message display driver atikmdag stopped responding and has successfully recovered. Just typing this screen deleted three times! What should I do? I have an AMD processor and Windows Vista Home.
Hello
See this article which has a Fix - it:
"Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
http://support.Microsoft.com/kb/2665946Also check with Support ATI, their drivers and documentation online and ask in their forums
on known problems. You should perhaps update the video driver or re - install the same as
If it is more recent. It is sometimes necessary to return to an older stable version.Drivers and Support ATI
http://support.AMD.com/us/pages/AMDSupportHub.aspxATI Catalyst drivers - use the Catalyst drivers
http://game.AMD.com/us-en/drivers_catalyst.aspxAMD/ATI Forums
http://forums.AMD.com/game/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Qosmio G50-10 q - driver has stopped responding and has recovered
My father has a Qosmio g50-10 q for more than a year, and as he bought it he could not see the videos with a resolution more than 640 * 480 and preview of the photos by right click on them and select Preview.
The problem exists on the operating system preinstalled Vista and today Ive tried to install an operating system windows 7 Professional 32-bit edition.
The problem is he stil.I downloaded the drivers from the official website of toshiba.
After a lot of testing, I downloaded nvidia nvidia drivers but the problem is exactly the same.
I am a COMPUTER expert, but I've never found a problem not solved like this.I can not even go on youtube and watch a video in full screen.
Whenever I try to play a video, the screen will start to Flash and then the video becomes black and a notification that says "display driver stopped responding and has recovered".I can't even see the video demo in the video folder of windows (wild life).
And the situation really strange when I click with the right button on an image and select Preview. It shows a white or a black image.If I press the button of the screen adjustment, the image appears, but when I go to the next pixture I can't see him again.
If I choose to see a presentation full screen, I can see all normally.
Its really frustrating for a laptop of this award and I don't know if this problem is drivers or the 9700 M GTS was defective from the start.I hope I can find an answer here before I return it to Toshiba
Thanks in advance
Hi mate
I had the same error happened on my laptop satellite.
The display driver crashed and recovered
I've updated the display driver and this has solved my problem.In your case, it of really strange that you can not watch movies in 640 * 480 or higher
Maybe you need to update the BIOS. Check if there is a newer version
If so, then an update of the BIOS would be worth a trySorry, but I have no other recommendation for you outside the update driver as mentioned it has helped in my case
-
G7 2017 Pavilion: display driver has stopped working and has recovered
I received this message at least twice this month. In addition, the laptop freezes several times a day. Not sure if the two problems are related. Thanks for any help you provide. Ana
Hello @Anne47,
Welcome to the Forums of HP Support!
I read your post on the issue of the display and wanted to help you!
Looks like there is a problem with the graphics driver. First of all, try to review the following document and let me know how it goes:
HP PC - error: display driver stopped responding and has recovered (Windows 10, 8, 7)
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great day!
-
Display driver has stopped working and has recovered - Inspiron 7359 2-in-1
This happens several times a day, please see the error message in the screenshot-"ha stopped working and also recovered display driver.
The strange thing is that she mentions Windows 8 when I have 10 Windows running on the machine. I also removed the display driver and installed from the dell support web site. Also updated the BIOS from the same place.
Had the same problem with an XPS 15 9530, to the point where it drove me crazy. I can confirm that, for a few days it's been corrected by installing the beta driver for Intel. You must uninstall the driver from Device Manager Dell, reboot and then install the beta driver.
Maybe you are looking for
-
HP p2-2334 PC: How do to recover from a c drive crashed
My PC just crashed and no longer sees a bootable disc. I have only the CD Kit b23 672285 supplied with the pc. What else do I need once I replaced the hard drive
-
Failure of memory computer format microtour HP Compaq dc5700
My computer as shown above has the 5 beeps and 5 red LED flashes of light from the memory, indicating that it is the failure of memory. Is it possible to reset the memory locations without opening my Tower? If theres no alternative solutions, it woul
-
Vista - Error Code: 0X8007000B (cannot install SP2)
ErrorCode: 0x8007000B that isn't on the list of possible errors to microsoft my PC came with no service pack, cause im trying to install SP2, which is the only one that updates yet, my windows Defender does not work, or msn messenger, or my windows u
-
Windows XP splash screen vanishes
My desktop runs on Windows XP service pack 3. No recent new software.For the last 2 days when I boot the Windows splash screen (black background) runs, and at the point where it would usually turn into blue background (welcome, loading settings...) t
-
Try to log in to yahoo, will not! 12 sign in a chance its a password ID.
Cannot connect to yahoo, I went around and around! My 12-year-old signed for account using its Id password! Can't into account!