Dc7900 FDF: Startup on DC7900 SFF Message

Similar Questions

• dc7900 sff: Quadro nvs 290 in dc7900

  Hello
  
  
  in my dc7900 SFF and I don't have a chance.
  I followed these instructions without result.
  "When a PCIeX16 graphics card is installed in the PCI onboard VGA connector black
  "and display ports will be disabled automatically."
  What was happening is not with me. When I have a pci-e card in the dark crack in the system
  stills boots in VGA. It's like the pci-e slots are not there.
  "To solve this problem the PCIeX16 first graphics card must be installed in.
  the white PCI slot. "Then do the following:
  It made no difference.
  "Starting the unit to the BIOS by pressing F10 at startup upward.
  
  Select the device, advanced integrated graphics subsystem options and enable the embedded video.
  By default the built-in graphic subsystem will be defined as disabled. »
  I have no video option integrated in the device options.
  'Save the changes and restart the device. Once the above steps are performed both
  display port and the VGA port will work in addition to graphs with ports for
  total of up to four screens. »
  As I said this is not the case. I've tried everything I can think and am now
  at a total loss.
  I bought an another NVS 290 pci-ex16, thinking the one I held should be defective, but
  It's exactly the same thing.
  I then bought a NVS 290 pci - ex1 in case the mentioned White slot was the little
  PCI-e slot. who has made a difference, he would not even boot into bios with
  This card is installed.
  In the BIOS of the safety device: there is no option video device
  
  in the devices on board: it just shows the serial port has
  
  Features: It shows Intel VGA on the irq 5
  
  In the device Options: it doesn't show VGA or integrated video.
  
  in Options of Bus: PCI Serr # generation (disabled) and PCI VGA Palette
  Snooping (activated)
  I tried all combinations but nothings working, I even updated the
  BIOS 1.08 to 1.26. I feel like pulling my hair now. Is there something
  I'm missing, is there any jumpers on the Board of directors who need to change or what? Any
  help would be greatly appreciated.
  John
  

  Hi, John:

  Installation of a video slot PCIex16 black card should have automatically disabled the onboard video and the video card must have worked.

  I suggest...

  1. go to Device Manager and uninstall the integrated Intel graphics card and also uninstalling driver box.

  Shut down the PC.

  Unplug all connected to it... keyboard, mouse, monitor... everything.

  Follow the instructions to clear the CMOS.   See Appendix B, pp. 63 and 64.

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3785403 & docid = emr_na-c01516072 & docLocale = en_US

  Install the video card and put everthing back together and see if it works.

• Update CPU dc7900 sff

  Hello

  I have a DC7900 SFF with Intel Core 2 Duo E7400 2.80 GHz socket LGA775. I want to upgrade my CPU with best compotible CPU. On processors Intel web site I saw CPU Intel Core 2 Quad Q9550S Processor with the same power (65W) necessary to last, but it is no longer sold.

  What is the solution?

  The Q9550S is not compatible with the motherboard of your computer desktop.

  The processors in the image below are compatible with the dc7900 SFF PC. You can always find the processors on the second hand market. Make a Google\Bing search to locate a source. I'd go with the processor Q9650. Search on the HP part number.

  As seen in the search I did on the part number for the Q9650, they are available. They are cheaper on the market, refurbished and second hand.

  https://www.Google.com/search?q=497734-001 & OQ = 497734-001 & AQS = chrome... 69i57.2135133j0j0 & sourceid = chrome & es_sm = 122 & ie = UTF-8

  

• HP DC7900 SFF: battery cmos HP DC7900

  Hello

  I have a HP DC7900 SFF refurbished running Widows 7 SP1.

  Everything's fine now, but as I've had the computer for about 18 months now, I find the CMOS battery will soon need to change the.  My questions relate to this situation.

  (1) I have not yet opened the computer so I'm not sure of the model battery.  I type lithium batteries CR2032 3v as him my old Packard Bell XP computer.  This is a BIOS battery commonly used - the HP DC7900 SFF also use it and if not what battery does use?

  (2) I downloaded documents HP regarding the HP DC7900 SFF, but I'm a little confused by the change information battery.  One document states that the BIOS got must be saved because they will be lost during the replacement process.  Is it true that I don't remember to do this on other computers?  If so, how can I save the settings?

  All the other tips about the CMOS battery change for this model would be very much appreciated.

  Thank you.

  Hello:

  Yes, you can use the battery 2032 what to have on hand.

  The only thing that's going to happen to the BIOS settings when you remove the battery, it is that they will be set to their default values.

  If you have not changed the BIOS settings, then there is no need to save the settings.

  I make a few changes to the BIOS settings in my dc7800 and I remember just what they are.

  I never saved before BIOS settings.

  You will need to set the time and date after replacing the battery.

• Can I update to this processor DC7900 SFF?

  -Hello, I have a PC HP - Compaq DC7900 SFF with a processor Intel E7300 (Core 2 Duo), and I want to update this processor by an Intel Q9650 (Core 2 Quad) (only to change the processor)?

  -Thank you.

  Hi, Pepito,.
  
  Yes you can upgrade this processor is compatible.
  
  Click on "Bravo Star" icon on the left side so resolute.
  
  I am an employee of HP, but the comments in this forum is of myself and is not HP

• HP dc7900 sff (energy star): upgrade to q6600 or q9650

  Hi I want to upgrade to q9650 or q6600 and I have hp compaq dc7900 sff (energy star)

  and I want to know if the upgrade works and I want to know if I can change the power supply

  Thank you and power supply 400w

  Hello:

  Here is the link to the quickspecs for the dc7900.

  Can be found on page 9, taken processors supported.

  http://static.highspeedbackbone.NET/PDF/13029_na-2.PDF

  The Q6600 will not work, but will the Q9650.

  You cannot change the power supply.  It is the property of HP and they do not have a better for the SFF.

  The Q9650 will draw 30 more watts than a core 2 such as the E8400 processor, so I would not expect on adding a video card, etc., unless you install a vido cards as a GT 610 or HD 6450 low powered.

• Best graphics card for dc7900 SFF

  Hi all

  My PC is a HP dc7900 SFF. Its having a Q45 chipset. I need to upgrade to a dedicated graphics card. The only problem I am facing is I know that pci-e slot of the PC is limited to 35 watts max draw. If anyone can recommend the best graphics card my system can handle?

  HP dc7900 SFF

  Integrated graphics - Intel Q45 chipset

  No additional hardware / stock only the usual stuff.

  You are the very welcome.

  This is excellent news.

  I have the HIS Radeon HD 6570 1 GB in my Elite 8200.

  Nice, it works!

  Enjoy your video card.

• HP dc7900 SFF. ATI Radeon HD 7750

  Hello

  I plan to buy a 7750 the radeon hd gpu. I want to just make sure it will work with supply POWER 240 w, it's in my hp dc7900 sff and my pc specs are:
  HP dc7900 sff
  Q45 chipset
  Intel Core 2 Quad Q6600 ~ 2.4 GHz
  4 GB of ddr2 ram

  power SUPPLY 240 block w

  GPU Nvidia gt 630 2 GB

  Please tell me if it will work or not?

  Hello:

  Here's a thread where a member successfully installed the 7750 low profile card in its dc7800 SFF, who has the same exact power supply like the dc7900 SFF.

  It has not reported any problem at all.

  He also posted the link to the actual card, bought it in this thread.

  http://h30434.www3.HP.com/T5/desktop-hardware/dc7800-memory-compatibility/m-p/2553943#M63061

  This of course was surprised that it worked!

• Help! Computer HP DC7900 SFF freeze then BSOD

  Please help, my dc7900 SFF has been so frustrating. Just after the start of the login screen, I log in after a few seconds, the screen freezes all pixelated and a bsod shows for one second and then the screen turns off. The Tower of the computer itself is still on.

  I press the button for 5 seconds to hard reboot power and turn it back on, the screen remains black and the computer fans speed up to full power.

  Now, I rarely beyond seconds logon before it freezes again. So I can't access minidump files. Also, I tested the memory modules in another computer and the graphics card, and they are very good. The drivers in Device Manager are all updated as well. The monitor is also perfectly correct.

  Please help me!

  Welcome to the forum.

  I think that you won't have answers to your problem if you start a thread here.  They are the members who know your best computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Upgrading power supply on DC7900 SFF

  Hi, I want to know what options are available to upgrade the power supply on my DC7900 SFF to support a graph card Radeon R6570.  Block of current output 250W PSU but the graphics card needs minimum 400W.  Did someone awatre of a secondary market PSU with > 500W that can fit into the SFF case?  Any other suggestions would be greatly appreciated.

  You are the very welcome.

  Yes, this diet is the P/S standard for the dc7900 CMT.

  It will be, in any way, shape, fit into the dc7900 SFF.

  As I posted above, I do not know of any alternative feeds that will work in the SFF.

  Try the card as it is and see what happens.  What a guy says it works fine.

  I guess it depends on how much of a load you put on it and the other factors.

  Use this power supply calculator to help you determine if it is possible to use the 6570 in your machine.

  http://www.Thermaltake.outervision.com/index.jsp

  Paul

• DC7900 SFF - CPU + GRAPHICS + HARD DRIVE CARD

  In order to upgrade my DC7900, I want to get help if you can:

  1. Can what type of CPU I put in my DC7900 SFF.
  2. What type of graphics card can I buy?
  3. Y at - it no problem to put a 1 TB HARD drive?

  TKS in advance to anyone who helps me

  Hello:

  I have provided the link to the quickspecs for your model:

  http://h18000.www1.HP.com/products/QuickSpecs/13029_div/13029_div.PDF

  Looks like the processor the faster, you can install processor Intel Core 2 Quad Q9650 (page 10).

  The options show up to a 500 GB HARD drive. Nothing more than that, you're on your own (page 16).

  Graphics cards options found on page 20. Note the power supply for the dc7900 SFF is just 240W.

  Paul

• HP27-k350xt:. On each startup, I get this message. "There was a problem starting C:\Users\bulldog2u\AppData.

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  BULLDOG2U wrote:
  

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  You don't want in this file.  Ads by Call Builder is malware that opens the ads on your computer.  If you encounter this error, then it is likely that you have an antivirus/antimalware program which was removed from your computer, but left the startup item.  More information on Call Builder, and how to remove can be found here.

  To remove this item from your startup list, follow these steps:

  System (Windows 7) Configuration utility

  1. In the start search box, type MSCONFIG and press ENTER.
  2. Click the Startup tab.
  3. Uncheck the items you want to run at startup.
  4. When you have finished your selections, click OK.
  5. In the box that appears, click on restart to restart your computer.

• When I re-startup I get a message "no available boot device - HDD internal.

  Original title: start the problem.

  Recently, my computer hangs in.  Sometimes, when I re-startup I get a message "no available boot device - HDD internal. Can someone tell me what this means? (Doesn't look good!)

  This probably (should) means that your hard drive is dying

  Try this if you can initialize

• On startup, I get a message "Alert." "The battery voltage is low," what battery? How do ifix it?

  On startup, I get a message "Alert." "The battery voltage is low," what battery?  How can I fix it?

  Try changing the battery CMOS CR2032 (battery on motherboard).

• I use Windows XP and on startup, I get the message insert the disc from center of solutions?

  I use Windows XP and on startup, I get the message insert the disc from center of solutions?

  You have one something or other HP connected to the PC? Check the CD-ROM that
  came with it. Otherwise, contact HP support.