Help! Computer HP DC7900 SFF freeze then BSOD

Similar Questions

• dc7900 sff: Quadro nvs 290 in dc7900

  Hello
  
  
  in my dc7900 SFF and I don't have a chance.
  I followed these instructions without result.
  "When a PCIeX16 graphics card is installed in the PCI onboard VGA connector black
  "and display ports will be disabled automatically."
  What was happening is not with me. When I have a pci-e card in the dark crack in the system
  stills boots in VGA. It's like the pci-e slots are not there.
  "To solve this problem the PCIeX16 first graphics card must be installed in.
  the white PCI slot. "Then do the following:
  It made no difference.
  "Starting the unit to the BIOS by pressing F10 at startup upward.
  
  Select the device, advanced integrated graphics subsystem options and enable the embedded video.
  By default the built-in graphic subsystem will be defined as disabled. »
  I have no video option integrated in the device options.
  'Save the changes and restart the device. Once the above steps are performed both
  display port and the VGA port will work in addition to graphs with ports for
  total of up to four screens. »
  As I said this is not the case. I've tried everything I can think and am now
  at a total loss.
  I bought an another NVS 290 pci-ex16, thinking the one I held should be defective, but
  It's exactly the same thing.
  I then bought a NVS 290 pci - ex1 in case the mentioned White slot was the little
  PCI-e slot. who has made a difference, he would not even boot into bios with
  This card is installed.
  In the BIOS of the safety device: there is no option video device
  
  in the devices on board: it just shows the serial port has
  
  Features: It shows Intel VGA on the irq 5
  
  In the device Options: it doesn't show VGA or integrated video.
  
  in Options of Bus: PCI Serr # generation (disabled) and PCI VGA Palette
  Snooping (activated)
  I tried all combinations but nothings working, I even updated the
  BIOS 1.08 to 1.26. I feel like pulling my hair now. Is there something
  I'm missing, is there any jumpers on the Board of directors who need to change or what? Any
  help would be greatly appreciated.
  John
  

  Hi, John:

  Installation of a video slot PCIex16 black card should have automatically disabled the onboard video and the video card must have worked.

  I suggest...

  1. go to Device Manager and uninstall the integrated Intel graphics card and also uninstalling driver box.

  Shut down the PC.

  Unplug all connected to it... keyboard, mouse, monitor... everything.

  Follow the instructions to clear the CMOS.   See Appendix B, pp. 63 and 64.

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3785403 & docid = emr_na-c01516072 & docLocale = en_US

  Install the video card and put everthing back together and see if it works.

• HP DC7900 SFF: battery cmos HP DC7900

  Hello

  I have a HP DC7900 SFF refurbished running Widows 7 SP1.

  Everything's fine now, but as I've had the computer for about 18 months now, I find the CMOS battery will soon need to change the.  My questions relate to this situation.

  (1) I have not yet opened the computer so I'm not sure of the model battery.  I type lithium batteries CR2032 3v as him my old Packard Bell XP computer.  This is a BIOS battery commonly used - the HP DC7900 SFF also use it and if not what battery does use?

  (2) I downloaded documents HP regarding the HP DC7900 SFF, but I'm a little confused by the change information battery.  One document states that the BIOS got must be saved because they will be lost during the replacement process.  Is it true that I don't remember to do this on other computers?  If so, how can I save the settings?

  All the other tips about the CMOS battery change for this model would be very much appreciated.

  Thank you.

  Hello:

  Yes, you can use the battery 2032 what to have on hand.

  The only thing that's going to happen to the BIOS settings when you remove the battery, it is that they will be set to their default values.

  If you have not changed the BIOS settings, then there is no need to save the settings.

  I make a few changes to the BIOS settings in my dc7800 and I remember just what they are.

  I never saved before BIOS settings.

  You will need to set the time and date after replacing the battery.

• my computer guard stop and start then I am browsing

  I have windows 7 installed in my computer. I'm not very tech savvy and don't know why, but the computer continues to stop and then hesitating and eventually go back to the top while I am browsing through Facebook or other Web sites. The computer is not shut down it's just sort of freezes. Also, I got messages saying that "pages do not react. I tried troubleshooting from my control panel and it worked once. It detected the problem corrected, and my computer was quick again. Now, it's back to frost up and such. I tried to resolve yet and that is to say 'no problem not detected '. This is why I post here. Again, I am not tech savvy so I have no idea what to do.  The other time the computer (when I did the first troubleshooting), I first called my cable company where I have my modem and wifi. Everything on their end was perfect. No problem there.  They suggested I have delete my browsing history. I did it. Nothing. It's still (once again) slowing down, freezing and eventually go back to the top.

  Any help in this matter is greatly appreciated!

  In addition, if the problem persists try a "clean boot" and see if that solves the problem:

  https://support.Microsoft.com/kb/929135?WA=wsignin1.0

  If a clean boot helps there are other measures in the article trying to find out what is causing the problem and then you could return to a normal startup.

• Update CPU dc7900 sff

  Hello

  I have a DC7900 SFF with Intel Core 2 Duo E7400 2.80 GHz socket LGA775. I want to upgrade my CPU with best compotible CPU. On processors Intel web site I saw CPU Intel Core 2 Quad Q9550S Processor with the same power (65W) necessary to last, but it is no longer sold.

  What is the solution?

  The Q9550S is not compatible with the motherboard of your computer desktop.

  The processors in the image below are compatible with the dc7900 SFF PC. You can always find the processors on the second hand market. Make a Google\Bing search to locate a source. I'd go with the processor Q9650. Search on the HP part number.

  As seen in the search I did on the part number for the Q9650, they are available. They are cheaper on the market, refurbished and second hand.

  https://www.Google.com/search?q=497734-001 & OQ = 497734-001 & AQS = chrome... 69i57.2135133j0j0 & sourceid = chrome & es_sm = 122 & ie = UTF-8

  

• laptop HP 2000: friends, I have laptop hp 2000. When I go to install windows xp on it then BSOD takes place.

  Friends, I have 2000 hp laptop. When I go to install windows xp on it then BSOD takes place.
  I have the motherboard intel with HM70.
  I have windows xp sp3.
  Please, help me to install xp on it.
  I hope that you will all help me...

  Hello:

  You must integrate the drivers for XP sata controller to be installed.

  I zipped and tied the drivers you need below.

  Unpack the drivers that I have attached to their record.

  Then, read the section Intel the link below and the downloadable document that explains how to integrate the drivers that I've fixed it so that XP will be installed.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place

  Original title: blocking or scrolling

  Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place. It scrolls upwards or downwards, when I try to open a place to file an open letter from mail, or trying to do some work. Please notify.

  Hello

  1 how long have you been faced with this problem?
  2 don't you make changes on the computer before this problem?
  3 what e-mail client or browser you use?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, viruses or malware scan and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• My computer start or load, continues coming BSOD

  My computer start or load, continues coming BSOD
  The problem seems to be caused by the following:Ntfs.sys
  PAGE_FAULT_IN_NONPAGED_AREA
  I followed the instructions and procedures, but it cannot go beyond that point and keep recurring whenever he starts or is restarted
  Technical information:
  STOP: OxOOOOOO50 (OxE2DD1000, 0x00000001, 0xF837D73, 0x00000001)
  NTFS.sys - address F8373D73 base at F834F000
  DateStamp 48025be5
  Beginning physical memory dump
  Hoping you can help with this problem
  Thanking you
  Chris

  Hi Chris,
   
  Try the methods listed in the articles given below to resolve this issue:
  The computer may automatically restart, or you may receive a "serious error" message or a stop error message in Windows Server 2003, Windows XP, or in Windows 2000
   
  You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

• Please help computer does not start!

  Hello, I need desperate help! When I try to start my computer, it starts work and then comes to the screen below. I tried to start it in safe mode and others, but this screen keeps coming back. Please help, how can I get rid of him?  The screen is bright blue with white writing and said.  A problem has been detected a windows has shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME so he says a lot of stuff on the verification of the material and at the bottom it said technical information: * STOP: 0x000000ED (0x89D35900, 0x00000000, 0xC000009C, 0x00000000) Please help me! I can't get my computer to start so I have a lot of data out there I'm desperate to get. Thanks, kate

  Hi KateStapleton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  See the Microsoft article below and try the steps mentioned, check if it helps.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/kb/297185

• Restart computer, windows xp screen came then the screen turned white

  Restart computer, windows xp screen came then the screen turned white

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error at startup of the computer?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Is it possible to put in place a wake-up call to the PC/computer Windows Vista laptop? Then, he can wake up in the morning.

  Is it possible to put in place a wake-up call to the PC/computer Windows Vista laptop? Then, he can wake up in the morning.

  Hello Xltdnbl,

  Thank you for using the Microsoft Windows Vista Forums.  In Windows Vista, there is not a revival on the operating system, but you can add a.  The site below has different types of alarms that can be added.  You can set the alarm to wake up with the sidebar.

  http://Gallery.live.com/liveItemDetail.aspx?Li=354455a7-0b97-42d7-adb1-09aeebee0c46&BT=1

  Please let me know if this was helpful, or if you're still having problems. Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Upgrading power supply on DC7900 SFF

  Hi, I want to know what options are available to upgrade the power supply on my DC7900 SFF to support a graph card Radeon R6570.  Block of current output 250W PSU but the graphics card needs minimum 400W.  Did someone awatre of a secondary market PSU with > 500W that can fit into the SFF case?  Any other suggestions would be greatly appreciated.

  You are the very welcome.

  Yes, this diet is the P/S standard for the dc7900 CMT.

  It will be, in any way, shape, fit into the dc7900 SFF.

  As I posted above, I do not know of any alternative feeds that will work in the SFF.

  Try the card as it is and see what happens.  What a guy says it works fine.

  I guess it depends on how much of a load you put on it and the other factors.

  Use this power supply calculator to help you determine if it is possible to use the 6570 in your machine.

  http://www.Thermaltake.outervision.com/index.jsp

  Paul

• setChecked() ToggleButton, causing demand to freeze, then SIGSEGV

  Hey all.  I started to develop my first Cascades / C++ application in my spare time (time full employment is developer java BB).

  I have a question which I hope someone can help me with.

  In my main constructor, after that I loaded in the QML document, I make a call to get a pointer to the QML object.  In this case, it's a toggle switch.

  // toggle switch
  mToggle = root->findChild("tab1_toggle");
  

  and further in the application, when a user touches another part of the screen or use a menu item, I trigger a method that contains this code:

  mToggle->setChecked(false);
  

  This code always causes the application to freeze, then the OS it stops and it printed in the console

  SIGSEGV code=1 fltno=11 ip=791f13f2(/base/usr/lib/libbbcascades.so.1@+0x35a9a) mapaddr=000f13f2. ref=00000010
  

  Why?

  What do you mean when you say "findChild method"?

  And Yes, I believe that it is valid.  Here is the part of the QML who lives the toggle

                  Container {
                      id: tab1_contToggle
                      layout: StackLayout {
                      }
                      topMargin: 65
                      layoutProperties: StackLayoutProperties {
                          horizontalAlignment: HorizontalAlignment.Center
                      }
                      ToggleButton {
                          id: tab1_toggle
                          onCheckedChanged: {
                              //I can put code here to get triggered w/o problems when the switch is toggled
                          } // end of tab1_ toggle element
                      } // end of tab1_contRoot
                  } // end of tab1
  

  Here's the hpp file where mToggle is declared.

  private:
  
  // toggle switch
      ToggleButton *mToggle;
  
  // other UI elements here that work just fine from other bits of code..
  

• Windows media player cannot play streaming music it freezes then replays

  I can't continually playing recorded music on my net book it freezes then play again, but if I play the music through my USB it's perfect... What could be the problem, can someone here who could help you? They already formatted to the service center but still that my concern is not resolved. Your comments are very much appreciated!

  See if that helps,

  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

• DC7900 SFF - CPU + GRAPHICS + HARD DRIVE CARD

  In order to upgrade my DC7900, I want to get help if you can:

  1. Can what type of CPU I put in my DC7900 SFF.
  2. What type of graphics card can I buy?
  3. Y at - it no problem to put a 1 TB HARD drive?

  TKS in advance to anyone who helps me

  Hello:

  I have provided the link to the quickspecs for your model:

  http://h18000.www1.HP.com/products/QuickSpecs/13029_div/13029_div.PDF

  Looks like the processor the faster, you can install processor Intel Core 2 Quad Q9650 (page 10).

  The options show up to a 500 GB HARD drive. Nothing more than that, you're on your own (page 16).

  Graphics cards options found on page 20. Note the power supply for the dc7900 SFF is just 240W.

  Paul