DDR3 PC3-10600 speed RAM can be installed in a ThinkPad x201t?

Similar Questions

• Modernization of the EliteBook 8560w - NIVIDIA 1000 M K2000M or DDR3 PC3-10600, DDR3 PC3-12800?

  I have an EliteBook 8560w with 1000M installed.  Is anyone know offhand if I can pass the 1000M to a K2000M or should I stay with the 2000M?

  Also, I am eager to increase the RAM.  I went to Crucial to check their offers and they list DDR3 PC3-10600 and DDR3 PC3-12800.  Which one should I go with?

  Thank you!

  Hello

  Based on the following (July 2012)

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c03424153/c03424153.PDF

  1. you can have Nividia 2000 M (page #84). The book shows you how.

  2. What is the least expensive because your machine is running only at 10600 (page #69)

  Kind regards.

• Satellite 1900-303-type of RAM can be installed?

  Hi guys,.

  I want to know a news on my Satellite 1900-303.
  What type of RAM can be installed?
  I have a 266 mHz, but it is quite impossible to find now on the market at a good price.
  so can I get a 333 mHz RAM, or my laptop it does not recognize in a good way?
  Will it work? And how do I set the bus on the BIOS? (If I may...)

  Thank you
  Davide

  Hello

  Satellite 1900-303 can be upgraded up to 1 GB of RAM.
  This means that you can use 2 x 512 MB RAM max modules.
  The compatible RAM modules are:
  200-pin PC2100 (266 MHz) DDR SODIMM

  I think you could use 333 Mhz too, but if the FSB is set to 266 Mhz and 333 mHz will run only at 266 Mhz.

  Greetings

• How much ram can I install?

  How much ram can I install in a Pavilion 500 152ea?

  with the chipset AMD APU A10-6700 (4.3 GHz with Turbo Core, 3.7 GHz, 4 MB cache) card mother AMD A75 FCH.

  Already installed a simple 8 GB of ram

  It is 8GB 16 GB or 32GB? & is it dual channel memory

  operating system is said to be 64-bit has a graphics card separate installed there are 4 dimm slots, I know that is not double

  Thanks for reading & a helping hand

  Tgirl_Alana, welcome to the forum.

  Here is the page of 'product' for the computer.  If you look in the section titled 'Memory upgrade information', it shows the maximum memory as 32 GB with a 64 bit OS.  It is dual channel memory architecture.  Therefore, you should check the memory stick existing brand and match exactly.  Otherwise, dual channel does not work correctly.  Running dual channel memory is faster.  If you does not match the existing memory, it may be better to buy two new sticks as a set.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• 8 GB DDR3 PC3-10600 ECC UDIMM

  I see where the 8 GB PC3-10600 DDR3 ECC UDIMM modules are now available in the C20 series. What is the room and/or the FRU number please. Thank you.

  Reference number: 0A 68681

  FRU: T 03, 8429

• Satellite 2800-600: how much RAM can I install?

  How much memory (RAM vivid), I can install on this computer. I want to have 512 MB but my systm stops when I install this memory size.

  Sorry for my English

  Poland Rafal

  Hello

  I found some information on this laptop and it seems that this laptop support max 256 MB (2 x 128 MB) of memory.
  You can use the modules:
  PS3004U - 1 M 06 64 MB
  PS3005U - 1 M 12 128 MB

• What is the Max Ram can be installed in an HP Pavilion ZV5000?

  What is the maximum amount of ram I can install it in a hp Pavilion zv5000.

  Search the site of HP. It depends on if its got a 64 bit OS on it. It can support more

• Satellite Pro A30: How much RAM can I install?

  Hi, I have a satellite pro a30 and I want to know how can I put it inside the ram. now, I have 512 MB, but I would have 2 GB. is this possible?

  Thank you very much

  Hello

  Yes it s possible to update your computer with a maximum of 2 GB of main memory, just put 2 x 1 GB sticks in slots and you will have 2 GB. You must ensure that you use PC3200 (400 Mhz) modules to ensure the best performance.

  Welcome them

• p6310f reading of RAM PC3-8500 but has installed PC3-10600. What gives?

  Here, I'm confused.  I bought your desktop p6310f with 6 GB of RAM.  I couldn't resist the temptation to fill the fourth slot with another stick of RAM, so I ordered a 2 GB of RAM PC3-10600 from Newegg key since it is what the three sticks that are installed in the machine - I removed the cover and looked. After installing stick I checked to see if it was ok by CPU - Z and SIW, and saw that the system has acknowledged the new stick (Patriot) PC3-8500.

  I called the Patriot - and actually spoke to a person, who said that the system could be down the RAM because of a stick "odd" as opposed to a pair that would be preferable, though even there is no support dual channel on this system.  He also said he could be a limitation of the motherboard, and he said that HP have been difficult to resolve.  He told me to remove the three original sticks of RAM and install just the food a stick to see if she would recognize him as PC3-10600.  I did what he said, and the computer recognizes the stick as PC3-8500.  I tried to call food back but could not get through.

  I removed the stick of Patriot and reinstalled three sticks of oem.  When I went into the BIOS it says that I have now three sticks of memory PC3-8500.  WHA -?  PC3-8500 all along was, and I didn't know?  She changed something by installing the stick of Patriot who will not change by itself unless I have reset the CMOS?

  I went to a local Best Buy today where they had their version of this machine (p6310y) on the screen, but I could not get into the BIOS.  Guess they don't want not customers bricking the system...

  A favor please, someone with a p6310f and who had not touched the RAM again: start the machine and go into the BIOS.  The first screen will tell what he has memory, the real rating-PC3-8500 MB or PC3-10600.  I suppose it's possible such HP got a good deal on these sticks of RAM, they put 'em in machines where their potential is not used.

  TIA

  Larry

  Bristol, TN

  Larry, this is the Product Specifications page for the computer.  If you look in the section titled "Memory", it shows "sustained speed PC3 10600 MB/s (message as PC3 8500).  It's a little confusing.  However, it seems that you are correct.  The motherboard can only use memory as PC3 8500.

  
  

• replacement ram: will be a CT12864BA1339 Crucial 1 GB PC3-10600 DDR3 DIMM 240 - pin make my computer faster?

  will be a CT12864BA1339 Crucial 1 GB 240 - PIN DDR3 DIMM PC3-10600
  Memory module (ram) works for a dell dimension 3000?

  and he will make my computer go faster?

  It is absolutely essential that any new module of RAM is fully compatible with both the motherboard and/or any other module of RAM already in the system.  In addition, there are sometimes jumper switches on old motherboards that need to be reset for new configurations of the RAM.  Consult the manual of your motherboard or the web site of the manufacturer for specific instructions and compatibility requirements.

  If you can't get your hands on the manual of the computer and the manufacturer does not provide a support web site, you can use these utilities to help determine the right kind of RAM required:

  SiSoft Sandra
  http://www.SiSoftware.co.uk/index.php?dir=&location=sware_dl&lang=en

  Belarc Advisor
  http://www.Belarc.com/free_download.html

  Of AIDA32 of unlimited possibilities
  http://Forum.aumha.org/overflow/AIDA32.zip

  In addition, memory Crucial (www.crucial.com) website has a database to help find the right RAM for your specific brand and model computer or the motherboard.  (By the way, Crucial is the only company I have ever buy RAM.)  I've never been disappointed.)

• RAM 2 gb 10600 s will work well with 2 GB 8500 s ram in computer hp laptop g62, please answer? can I install both

  I have hp g62 laptop with 2 gb 10600 s ram installed, I have an another 2 gb ram 8500 s, I can install them both in the laptop? they will work very well or they will conflict because of the difference between s and 8500 10600 s?

  Hello:

  They should work fine, but the memory will operate at slow speed of 8500.

  Paul

• HP 250 mobile G1 - maximum RAM that can be installed?

  Hi, I recently bought a 250 HP laptop (H6E24EA #ABU) G1: processor: Intel® Core™ i3 - 2348 M 2.3 GHz 3 MB cache • 2 carrots • Mobile Intel® HM75 Express;     Memory: (PREINSTALLED) 4 GB 1600 MHz DDR3 SDRAM • 2 x SODIMM

  Wanted to update the RAM - have read conflicting amounts - 6 GB max HP and sites of the reseller site (maybe they are just copy and paste from HP site?) - BUT 8 GB on other "cranky" sites and also the sites of RAM as Crucial when I search for this EXACT model.

  Q1: which is correct?

  Q2: if possible or no one is safe, would it hurt / impair the laptop, if I chose to install the 8GB (even if it can only access 6 GB)? In other words, is it bad/harmful for computer laptop/CPU/etc if I OVERINSTALL ram (8 GB rather 6 GB HP spec)? 

  Q3: If the RAM chips on the two slots game (eg. need same #GB in each slot; in spec (CL, voltage, etc.); or even the brand of RAM?)

  I ask because some of the programs CC Adobe (Indesign, Illustrator, etc.) CAN work on existing ram pre-installed but Adobe recommends that 8 GB. And Yes, I realize that an i5 or i7 cpu would have been better for my needs than an i3 to turn things like photoshop etc, but I really need to keep my purchase within a very limited budget and still Adobe CC minimum specifications. And Yes, I understand that overinstalling RAM can be a loss of a little money, but I was still wondering.

  Thank you very much.

  Hello:

  Here is the link to the service manual for your laptop.

  The news of memory support are listed in Chapter 1, page 2.

  http://h20566.www2.HP.com/portal/site/hpsc/template.BINARYPORTLET/public/KB/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI & spf_p.rid_kbDocDisplay = docDisplayResURL & javax.portlet.begCacheTok = com.vignette.cachetoken & spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c03763062-1%257CdocLocale%253Den_US & javax.portlet.endCacheTok = com.vignette.cachetoken

  It seems to me that they left just on the config 2 x 4096 as the first thing that is written is that 8 GB is taken in charge.

  2 memory customer module slots available/upgradable memory

  Supports dual-channel memory

  Supports up to 8192 GB of RAM

  So I think you see this info anywhere, they are copied to memory of this source configuration specifications.

  Too bad they have not just install 1 x 4 GB PC3-12800 memory.

  Now, you will need to remove the bars of memory 2 GB and install the memory 2 x 4 GB modules.

• Compatibility of PC3-12800E (DDR3-1600) without buffer RAM with HP Z800

  Hello

  I recently bought a Z620 and a Z800 (second two had, of course).

  The Z620 has 48 (6 x 8) GB RAM unbuffered PC3-12800E (DDR3-1600). I'm busy to remove the 16 GB of the Z620 and install them on the Z800, which has only 2 x 2 GB RAM.

  Please let me know if PC3 - 12800E (DDR3-1600) without buffer RAM compatible with Z800?  It doesn't matter if I have to remove the existing 4 GB of RAM.

  Thanks a lot for your answer.

  concerning

  Sabba

  At any time.

  I am pleased to have been of assistance.

• can I install an operating system on my ram?

  I went through a lot of posts on how to do that, people just give fancy words in huge paragraphs, that's the only problem I have not been able to address, I mean, Ive got a lot of things in my pc just by reading a few posts. but this, increasing the operating speed of my pc by like 1000% is too hard to resist, but I've never met a detailed procedure. It would be great if I get a link to a video that comes of showing me how to do the same thing, a break step by step what to do also would suffice.

  Ask yourself, "Can I install an operating system on my ram?"

  Microsoft does not provide a way, or he takes it somehow, to install one of its operating systems to any volatile storage device. This includes RAM any form or configuration.

  For a moment, we suppose you could do: as soon as power was removed from the unit, all contents are lost. So, the installation will have to be repeated the next time you want to use the computer.

  See an overview of what makes setup in place. The Windows DVD is put in the DVD player and Setup copy a base to HD image and preparing it for use. Control passes to the newly created system and a detection phase begins which determines the hardware in the computer uses and assembles a special computer image on the hard drive. The system restarts and uses the custom image. (The actual process may require several reboots and download files from the Internet, if a connection is available). At the end of the installation, there are on the hard drive an image of the operating system working together customized for this computer. Whenever the computer starts, it loads its core working together. How much is loaded depends on the amount of RAM available. Manager windows memory must take into account / meet the requirements of the programs started and run as well as the background as networking, memory of the file transfers to the use of system and application, & c.

  Perhaps you would be worth considering the use of SSD devices or hybrid rather than or in addition to the HDs ordinary.

  Tom Ferguson

• Linux operating system can be installed on Mac Mini; Intel Core i5 at 2.8 GHz. 8 GB 1600 MHz DDR3; Iris 1536 MB Intel?

  Linux operating system can be installed on Mac Mini; Intel Core i5 at 2.8 GHz. 8 GB 1600 MHz DDR3; Iris 1536 MB Intel?

  Depends on whether you want to replace OSX, dual boot with OSX, or run in a virtual environment.

  Linux operating system isn't a BONE btw, is a generic name for all versions of Linux.