Modernization of the EliteBook 8560w - NIVIDIA 1000 M K2000M or DDR3 PC3-10600, DDR3 PC3-12800?

Similar Questions

• Where can I find a set of RAM for my Elitebook 8560w 2x16GB?

  The Elitebook 8560w is said to have 32 GB memory maximum capacity in two slots of RAM SO-DIMM 204 pins.  Unfortunately, I did not have chance to find a set of RAM 2x16GB with the correct specifications (1333 MHz or 1600 MHz). Can someone point me in the right direction?

  Hello
  I've yet to see a single 16GB sodimm module. The chipset can support 32 GB of RAM, but in case that the laptop has only 2 slots you are limited to 16 GB only. I've seen laptops with 4 memory locations, but they have been adapted...

• EliteBook 8560w: startup stops at the HP logo

  EliteBook 8560w, 8 MB ram, Intel i5 - 2540M to 2.6 Ghz, AMD over-pants M5950

  Computer was working fine without any problems. Windows Update, now stuck on startup with HP logo on the screen and the text "press the ESC key for startup menu '.

  • ESC key does nothing.
  • Removed the battery, held on substantive residual load lost power button
  • Holding F9 or F11 at startup does nothing.
  • Win7 32 disk turns but will not start.

  Which exhausts my troubleshooting led by Google, any ideas out there?

  Thank you

  Ken

  Try to get the hard drive to see if you can get into the BIOS with F10. If that gets you more far, he can point to hdd bad start to stop.

• Problem updating Windows on Hp EliteBook 8560w - HP ProtectTools Security Manager 8.1

  When I ' try to update Windows 8 Preview of Windows 8.1 on a laptop HP EliteBook 8560w, I ' am getting this error message: "before upgrade you to Windows 8.1 Preview, uninstall these apps: HP ProtectTools Security manager, HP WebCam.

  Hp ProtectTools 8.0.2.1341 Security Manager is installed with the password manager and Credential Manager.

  Someone had this problem and fixed it yet?

  Thank ' s!

  Hello!
  Thanks for posting in the HP support forum!

  8.1 Microsoft Windows (although very good and big update ) is still in BETA (testing) phase and is not officially supported.

  Windows has features upgrade analysis and that it has detected that HP ProtectTools are not (yet) compatible with the new operating system (new update) - still in test.

  Note that this OS is still in beta and may contain bugs. In addition, he brings a few changes that any other 3rd party suppliers must take into account and it will take a while until the program is compatible.

  I recommend - if you want to test the new operating system, install fresh on another computer to test (processing Edition), not a production machine. Otherwise, for your laptops of business - use only the final versions of the software (such as Windows 7 SP1 or Windows 8).

  Let me know if I can help you further!

  IT_WinSec

  Please, take into consideration my location (Europe) and time zones. I'll try to give the answer as soon as possible.

• HP EliteBook 8560w Win8.1 does not fingerprint IE11

  CZE: Hi,

  Vlastnim for laptop HP EliteBook 8560w u Saada jsem provedl update na CZE Win 8.1 Pro x 64. Bohužel in. installation nastroje HP Password Manager 8.0.1.1328 a jeho současti v IE11 přihlašovani nefunguje mi. Přihlašeni počitače funguje v pořadku, ale v IE11 to sice objevi ikóna tohoto nastroje, ikóna problikne, že byl načten, ale do formulaře learn otisk is nic nevyplni.

  I chyba mě, nebo s neni IE11 kompatibilni nastroj u?

  ----------------------------------------------------------------

  Google translation to ENG: Hello,.
  I have a laptop computer Watt HP EliteBook 8560 with whom I made the update 8.1 for Win x 64 in English unfortunately, after installing the HP Password Manager 8.0.1.1328 and part of me does not connect in IE11. Connect you to the computer works fine, but in IE11, well as the icon flashes of this tool icon, fingerprint was loaded, but the form page does not do anything.
  It is a mistake for me or tool is not compatible with IE11?

  Ignore the box below this one. This site won't let me edit or input text from my smart phone without using the code box. I got my fingerprint reader to work in Windows 8.1 (both windows login and in an internet browser) using the blog that I mention in my post at this link: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-J070CA-Windows-8-1-Validity-Fingerprint-Reader/td-p/3025495/highlight/true/page/3 . It's, I believe, the sixth (6th) post by Melissa_01 (me) on the page in the link.
  

  Hey, I got it to work for me. Read what I posted in another thread (page 3) and see if it works for you too. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy stems-and-Software/HP-J070CA-Windows-8-1-Validity-...
  

• Drivers on Elitebook 8560w problem

  Hi all

  I wonder if you might be able to shed some light on a problem I encounter.

  I'm building an Elitebook 8560w with Windows XP x 86. But I can't find the drivers for the following items:

  Base system device

  USB device

  This is how they appear in Device Manager. Strangely, I have installed the USB driver from the HP site, and they work very well. But I still have the yellow exclamation next to the USB device in the DM window?  I don't know what is peripheral Base system!

  Any help would be appreciated!

  See you soon,.

  Andy

  You are the very welcome, Andy.

  It's your sensor of fingerprints that need the pilot.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071171&prodNameId=5071173&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-99717-1

  Best regards

  Paul

• EliteBook 8560w: 8560w w / external projector does not not under Linux or Windows 8.1

  I recently bought an Elitebook 8560w opportunity and installed 8.1 for WIndows and Linux in a dual-boot configuration.  Using the laptop for weeks caused no problems at all.

  I used the display port on the screen on a TV 720 p to Samsung to mirror, so the kids can play games and it works perfectly, but when I try to connect to a home theater receiver as a passage to a projector 1080 p, the projected screen turn black for a few seconds, and then correctly show the desktop. This trend will continue indefinitely.

  I hooked it goes back to the 720 p TV and it works perfectly.  The problem exists in Linux and Windows.  I uninstalled the drivers and reinstalled a different version in each operating system.

  Ideas?

  The Elitebook works and no hardware or software problem.

  You may need to have an active DisplayPort to HDMI adapter since signal must pass the home theater receiver.

• BSOD Atikmpag.sys Elitebook 8560w ati m5950

  Hi all

  I have problems with my Elitebook 8560w. I get the BSOD on startup all the time, when the login screen appears in windows 7. (atikmpag.sys)

  I have tried several things but I can't solve it, the laptop cannot start up if I use the standard vga driver.

  Things I've tried:

  Fresh install Windows 7 x 64, Windows 7 x 86, Windows XP x 64, Windows XP x 86

  Tried all versions of BIOS

  Tried all versions of drivers for video card, both HP and Ati with fres installs Windows.

  It's getting boring, please help me.

  Where can I get the latest version of the video Bios for my m5950? Who can solve my problem.

  Hello hlaca20. I understand that you have a problem with the blue screens that often occur during startup. Is this correct?

  You've tried quite a few steps to solve the problem. I think that the combination of the BIOS update, fresh install multiple operating systems and fresh drivers excluded the majority of software problems. Have you tried to test your equipment?

  If you have not deleted the partition of HP_Tools you can use the built-in tools that provides HP. You should test your memory and the hard disk to determine whether there are problems.

  This document describes how to run the hard drive test. Simply repeat the steps in selection of memory the second time to test the RAM.

  I'm waiting for your answer; have a great day!

• M.2 for the elitebook 745 g2 ssd

  Hello

  I would like to know if the WWAN slot (I think it's a PCIE port) in the elitebook 745 g2 (see image) could be used to insert an ssd m2 as extra storage. The only information I have is this forum (http://forum.notebookreview.com/threads/elitebook-700-series-elitebook-725-g2-elitebook-745-g2-and-e... where it says that this operation would be that the system recognizes not the module.) Can someone confirm that your experience?

  It's a shame I can't use this location for that purpose. Is there a way around the problem?

  

  Thanks in advance for your help

  Please see HP EliteBook 745 G2 HP Notebook PC and PC portable G2 EliteBook 755 - Maintenance and Service of Guidefor more information on this model. Based on the MSG, it does not appear that the WWAN slot will support an SSD m2.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• The HP TouchSmart 420-1000 t is a PCI-Express x 1 card?

  Hello
  I have a problem: I recently bought an HP TouchSmart 420-1000 t (hp touch smart pc 420, n {removed privacy} series)
  Productn; QB908AV #ABA, model N; 420-1000 t) and I noticed that she had no firwire port. the problem is that I need a firewire port to my Sony HVR-M25AE recorder... I bought a PCI Firewire 1394 with 3 + 1 Ports controller card, but I have not found a PCI-Express x 1 on HP TouchSmart...

  The HP TouchSmart 420-1000 t is a PCI-Express x 1 card? ... If so: where is this you?

  Please help me: I galley

  Telhouni1, welcome to the forum.

  You are welcome!  It's a pleasure.

  Here's a mini adapter PCIE card for your computer.  I suggest to contact TigerDirect Customer Service to ensure that it will not go in the space provided.  They should be able to help you.

• To put the module chassis SCXI 1000 with sinusoidal input name

  It is imperative to turn the module chassis SCXI 1000 with a pure sinusoidal nickname of entry sector rather than sinusoidal waveform?

  This will affect the performance and reliability of the DAQ module to provide power with a sinusoidal waveform of nickname, he entered input sector?

  Concerning

  Jamal

  Hi Jamal,.

  If you look at page A-2 of the 1000 users manual found here you can see that the power needed for the 1000 is not too strict. So I guess that if your hands are almost sinusoidal at all about these tensions ca then you won't have a problem.

• EliteBook 8440p: supports the elitebook 8440p

  OK so we (my father and me & anyone else) are repairing an Elitebook 8440p for my father and I wonder even if the elitebook 8440p does not support windows 10 - it does support windows 8/8.1?

  I ask only because my father gave me 2 licenses and I was wondering if the elitebook 8440p support windows 8/8.1 cause then I can give 1 license while my lenovo has another

  -cause the way that I see - if it does not support windows 10 then at least it would support windows 8 or 8.1 lowest

  so the question - it's officially support or is there a list of the devices supported for windows 8/8.1?

  Hello:

  All I can tell you is that there is no official support from the W10 by HP drivers for the 8440p.

  I have the model that preceded the 8440p (the 6930p) and it works fine W10.

  Mine doesn't have a webcam, and I do not like the fingerprint reader security features, so I can't report on these devices.

  All the drivers are installed but in Device Manager, and I used the drivers for W7 for everything what has not installed W10, such as the card reader and HP 3D driveguard.

• Where the second RAM on the Elitebook 8540w location?

  Hello, I have the Elitebook 8540w with processor i5 and windows 7 Pro. I bought two 8 GB cards to increase the ram, but can find accommodation with a stick of ram in it.

  The manual says there are two slots for ram and it can be upgraded to 16 GB. But the video installation shows a slot under the keyboard. I thought he would have another slot somewhere once I opened and removed the keyboard. But there is no. Also, I opened the compartment in the bottom where other portable store their ram and it was not a slot.  My computer said it has 4 GB of ram installed on the computer. The stick I found was only 2 GB, which means that there are another 2 GB key somewhere. Anyone know where and how to get home? Thank you very much.

  Best,

  Jeremy

  You are the very welcome.

  This isn't the problem.

  The problem is due to your mobile workstation with the i5 processor - it only supports 2 x 4 GB of memory.

  You must have the quad core i7 for PC to support 2 x 8 GB of memory.

  Please refer to the link below, page 7, double asterisk.

  http://h18000.www1.HP.com/products/QuickSpecs/13529_ca/13529_ca.PDF

  I quote:

  * 8 GB SODIMM is supported only on the quad-core processors.

• have the new Canon pro-1000. Just installed the inks. He tells me that I'm not on a flat surface and c

  I have the new Canon pro-1000. Just installed the inks. He tells me that I'm not on a surface level code1340 error '. Impossible to go to the next step,

  No post?

  Ian

• Cf11 VFS error: The Global memory limit 1000 MB for virtual file system in memory exceeded.

  Greetings,

  I have a new standard CF11 installation on Windows 8 server x 64

  16 GB of ram

  Parameters to the JVM:

  -serveur - Xmn1024m-Xss1024k - XX : PermSize = 256 m - XX : MaxPermSize = 2048 m - XX : + UseParallelGC - Xbatch-Dcoldfusion.home={application.home}-Duser.language=en-Dcoldfusion.rootDir={application.home}-Dcoldfusion.libPath={application.home}/lib-Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true-Dcoldfusion.jsafe.defaultalgo=FIPS186Random

  Min heap: 2048 mb, Max 6144 mb

  Parameters of VFS:

  VFS global memory limit: 1000 MB

  Memory per request of VFS limit: 400 MB

  
  

  CF is currently 1.7 GB of ram

  
  

  I have a 6 applications on this server. 1 use the VFS.

  The others are applications simple cfm that have NOTHING to do with the VFS system.

  
  

  I have a scheduled task that calls simple cfm pages to update the tables in our database. During her run of these tasks, I get an email from the overall error (which I have the installer if there is an error in CF) and most of the error is
  

  Browser	CFSCHEDULE
  DateTime	{ts ' 2014-08-16 15:07 '}
  Diagnosis	The overall memory limit 1000 MB for virtual file system in memory exceeded. < br > increase memory VFS limit in the ColdFusion administrator. < br / > the error occurred on line 17.
  GeneratedContent	[empty string]
  HTTPReferer	[empty string]
  Mailto	[empty string]
  Message	The overall memory limit 1000 MB for virtual file system in memory exceeded.

  QueryString

  [empty string]

  RemoteAddress

  xxx.xxx.xxx.xxx

  I have a utility I can run to show all files in the VFS. and there are currently a total of 8 cfm files that comprise 4064 KB of space in the VFS.

  The 1 application that actually uses the VFS has several functions. Which essentially writes the CFM files includes the MTC as a contained variable and returns the variable.

  Under CF9 we also remove disk ram CFM files after their inclusion. But under CF11 it fails with an error indicating that the modification date is not found. I removed from the part of the file delete and the system works but we get this error of memory with the VFS.

  Can someone shed some light on this for me?

  It's not since.

  Thank you

  
  

  
  

  
  

  
  

  
  

  I'm sorry to tell someone else that my find this question, I could not solve it.

  Thanks for all your great suggestions and help in the BK.

  We are just past the entire system to the hard drive. This will eventually hurt us in the end, but at this point we don't have an option, our system has been down since the day wherever we improved to CF11. We did a lot of testing before the migration of load and our tests, it worked. But there were many problems with the IIS connectors and we also installed new memory. There has been a lot of things and it is difficult to find the exact cause.

  However, the error should always be reported as a bug. It gives a wrong idea, which is actually the issue and this will lead to someone else in the future in a ghost rabbit hole that does not exist.

  Thank you

  Tim