Deactivation by scanning

Similar Questions

• OfficeJet 8500 Prime will not connect to wireless for the scanning of email

  HP Officejet 8500 first.

  Western Digital N900 router

  Printer is connected to my home wireless network and wireless to my HP Pavilion laptop (which is in the same room).

  I felt for a few years and I do a LOT of scans to myself on my e-mail and rarely have problems.

  About a month ago, I got a new wireless router, and the problems started.

  I had the wireless configuration.  Printer connect to my home wireless.

  If I try to scan to e-mail, I get a message "unable to connect to the server. Check the address and the name of the server.

  I can print from my laptop very well (wireless)

  I have run the wireless network test report (which incidentially, does NOT use the default tray as specified in default values, so I have to remove the media in a status bar and replace them with paper to make turn this test).

  All passes.

  very good signal strength.

  no other network with the same ssid

  Wireless networkes detected: 3

  Channel 11

  everything looks great.

  I connect to my router (from my wireless laptop).

  My router says that the printer is on the network.

  I turned off/power on router to reset.

  I tried the reset network default printer and returning via the wireless Assistant.

  I tried another wireless (5g below)

  I got the preferred wireless network name and password several times.

  I turned the printer deactivation / activation.

  The SSID signal is using 2.4 Ghz (802.11 B + g + n) 20 / 40 mhz channel (auto) AND I ALSO tried with channel (11) just

  The router includes a 5 GHz (802.11 a + n), but the printer never sees this SSID, and tried manually enter the name and password as well.

  I get the same error every time.

  Sounds like you arehaving problems with scanning to email. Can you tell me first if you have tried all the other email accounts other than the one you are using. According to the security on the SMTP servers for the customer, you will have to go and try another account. I suggest to make a Gmail account and attempt to put in place the new feature.

  I would like to know how this happens, and I'll get back right with you!

  -Spencer

  PS I hope you had a great weekend and had a wonderful day!

• Photosmart 7510 will not scan. Print, fax, Eprint, everything works, but not software for scanning

  I spent over 10 hours on the phone with Technical Support, Cloud Computing service and an escalation of HP handler.  The escalation of HP Manager ran a cleaner tool to remove completely all HP printer software and reinstalled.  Now, everything works except for analysis.

  Using the utility to scan the PC gives HP, "the series of HP Photosmart 7510 was not found"

  Using Scan of the computer for the printer display gives, "make sure that the HP printer software is installed.  I can, however, scan-to-one chip memory inserted in the computer, but is produces a jpg file and I need PDF.  All scanning software worked before technical support and escalation of HP is involved.

  Hi Bob,

  I discovered that Windows has made a number of updates to security on my computer.  Therefore, windows do not see the 7510 as a device scan and judged that he was a suspect and deactivated engine part analysis of the HP software.

  Reinstall the printer as a wireless printer, and then by reactivating the printer to scan, my HP software came back and now everything works as advertised.

  I think you were on the right track.  Then analysis stops on an HP printer without apparent reason, check if there's any recent Windows updates.  If so, reinstall the printer as a new wireless printer.

  Thanks for your comments!

• whenever I try to use the windows fax and scan, I have this message:

  whenever I try to use windows fax and scan, I have this message: Windows fax and scan cannot access your documents folder. Please, make sure that windows fax and scan can access this folder. How I do that?

  Hi Mohamed

  Thanks for your posting in the Microsoft community

  You can check if you have my documents in C:\Users\ (username) \My documents correct location.
  If the problem persists, you can deactivate and then activate Windows Fax and consolidated expansion of print and Document services from the windows on or off check and option features if this solves the problem.

  You will need to disable the function, and then click OK. Now open Windows Fax and Scanand check. Yet once activate the Windows Fax and Scan and check if you experience the same problem.

  See the link below to display the window for the deactivation and activation windows fax and scan under Print and Document services and check option.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  OR

  Just find a hidden file called 'fax' at c:\users\rich\Documents\. I have
  delete the file and create a directory named "Fax" to
  c:\users\rich\Documents\ with subfolders called "Drafts", "Inbox", and
  "Personal cover pages. You click Windows Fax and Scan

  It will work

• How to disable edge scans?

  I have Windows 8 on a 64 bit system with an Elantech touchpad.  I am trying to disable all the striking edge to swipe.  All of this.  I want that * gone.  Now, I went in ASUS Smart gesture and disabled all of it... but only by scanning left and drag dessu disappeared.  Forehand is always to be abhorrent and refused to turn it off under any circumstances.  Until you tell me to go to the mouse properties > settings of the device in the Control Panel, IT is not a.  The tabs in my mouse properties window include buttons, pointers, pointer Options and hardware only - no other tabs.  I had to go in the registry just to understand that I had an Elantech touchpad.

  In the registry, I found a few things like HKEY-CURRENT-USER/software/Elantech/SmartPad/Edge_F1_SwipePage_Enable and /Edge_F2_SwipePage_Enable

  I have no idea what they mean respectively, and I don't know how to play with them without breaking all my *.  The (default) entry of current value is 0 when you click on 'Edit' for each of them.  All clues on whether or not the violin can solve my problem and if so, how?

  Also, if it is possible to add the "Device settings" tab for the properties of the mouse, I would like to know.  I got pretty sick of not being able to do basic troubleshooting whenever my touchpad decides to have a fit of anger.

  Hello Jonathan.

  Thanks for the quick response. I'm sorry if I misunderstood the question or provided the steps which were not relevant.

  I would like to know, you have the Elantech touchpad installed on the computer?

  If so, I would like to inform you that the touch pad of the Windows Control Panel setting now seems to access the settings menu of bad touch pad.

  Please download the latest version of the Elantech Touchpad driver from the link providedhere.

  Navigate to the location below:

  C:\Program files\elantech\ETDSimpleUI.exe

  Once you access this location, run the ETDSimpleUI.exe file.

  Check if you can disable gestures touch and feature of this utility landslide. For more information on touch deactivation using the Elantech utility, you may need to get in touch with the AsusAsus.

  Hope that the information provided is useful. Keep us updated on the status of the issue.

• Scan of confusion of the intellectual property implementation of ORACLE R12 with 11 GR 2 applications

  Hi all
  
  We intend to implement a R12 apps with 11.2.0.3.
  As I know that when we install 11gR2.scan oracle listener and scan vip was created in GRID_HOME. The listener to scan comes with the default port.
  
  
  As R12 by default comes with 11.1.0.7. According to oracle note ID - 823587.1
  
  We must follow the procedure below.
  
  srvctl add listener-l listener_ebs o < ORACLE_HOME 11 GR 2 > < port EBS database > Pei
  srvctl setenv listener-l listener_ebs t TNS_ADMIN = $TNS_ADMIN
  
  srvctl add scan_listener-l listener_scan Pei 1521
  
  My question is what do I have to configure TNSNAMES.ora? Tnsnames.ora entry contains scan-vip or vip virtual.
  
  What should be the value of remote listener tha and local listener.
  
  Help, please.
  
  Thanks and greetings

  My question is what do I have to configure TNSNAMES.ora? Tnsnames.ora entry contains scan-vip or vip virtual.

  See "3.7.1 steps to realize on all Oracle RAC nodes" in the same doc.

  What should be the value of remote listener tha and local listener.

  See (Appendix D: activation/deactivation SCAN listener support in Autoconfig) in same doc.

  Thank you
  Hussein

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• Scanning PC settings appears every day

  Whenever I have begin to macOS, I get a window of "Scan-from-PC. It does list some scanners and does not include the option Add / Remove. There is a "Scan of operating Panel settings" button which takes me for a nearly identical and all as useless screen. And there is a? Help button that signals "the subject is currently unavailable.

  Any suggestions on how I can do this, go far? Granted it's only a click, but it's a nuisance that I get to enjoy every day.

  Thank you.

  Uninstall the scanner software - it doesn't seem to be compatible with macOS Sierra.

  You can also check the preferences > users and groups > [you] > login items and remove (with the minus sign) any scanner related Articles.

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• Impossible to scan on Canon MB2350

  I occasionally scan using the Scan 2 IJ of Canon utility software.

  I just tried to analyse a contract and that's all that I can get this message:

  

  It worked fine the week last under OSX.

  I have a network wired ethernet LAN connection.

  The printer can print OK.

  Any ideas please?

  Kind regards

  Bob

  I contacted Canon, they have yet to get their act together (my words) and, at this late stage, realized that some of their software, drivers, etc., is incompatible with the Sierra.

  Their recommendation does not upgrade to Sierra if you want their kit to work.

  No time estimated for fix.

  Either by the way, Nikon have now identified a problem.

  Maybe Apple should have an Upgrade Advisor as Microsoft do...

  Thanks for reading this.

  Bob

• Canon MG7100 prints but will not scan after update of the iMac? How to fix?

  Canon MG7100 worked very well with the iMac - scanning and printing. After doing the updates of the iMac and installation Siri scanning does not work. Always printing. The printer/scanner Canon said - Set PC to start scanning - I have MG7100 added on the iMac. I opened (and re-locked) firewall to let in the Canon UJ utility. I deleted the all-in-one Hi - and added MG7100.

  http://support-Asia.Canon-Asia.com/contents/Asia/en/0100535401.html

  doesn't look like canon has a printer that takes in charge the newer versions of Mac OS x, if I were you I would take contact them to see if they plan on support of new versions, apple made no drivers for the hardware they don't and if hardware manufacturers does not provide a working driver head can group with the new version of Mac OS x We have to rely on manufacturing to have a download on their page

• Giant PDF scans from Sierra update

  I like to use the 'digital images' app to scan documents and save them directly as a PDF. Ever since I updated my system to Mac OS Sierra pdf files created when scanning are about three times the size they were before and I can't find a place to change the setting for that. I don't want to use a different software since it worked perfectly fine before the update. Any ideas?

  Same question. I have been in contact with Apple Support who had no idea about this, and it should report a bug. Most of the reports are more likely to get noticed: http://www.apple.com/feedback/macosx.html

• New feature of memories do not scan all the photos

  I've updated to Sierra and was really looking forward to memories in pictures. I turned it on and it said that it would take some time to analyze my library. I thought that. I have a library of 60 GB. However, the bar has not moved for several days. So I left and reopened the photos. He then invited me again to activate the memories. After only a few times to quit smoking pictures and allowing the memories, it seemed to take. A couple of souvenirs presented themselves (3).

  However, now its more than a week later and there are no more. I can't understand how to trigger memories to analyze my photos.

  Does anyone know how to force the re-scan for souvenir Photos? Or has had a similar experience? Found a solution?

  Thank you

  The f

  I can't understand how to trigger memories to analyze my photos.

  Memories will be triggered by adding more pictures, naming faces, names of places and in some time.

  I often see new memories appear as "on this day". For example, if the date is the same day of AAS, when I was on vacation and shot a lot of photos, a memory 'on this day' will appear.

  You have the preference ' Photos > Preferences > memories: holiday events Show "enabled?  Then you should see a lot of memories of family get-togethers as well.

• PROBLEM when scanning multi-page pdf

  Hello

  Since the update of the sierra, I have a problem when scanning multiple page document. If I check the checkbox "merge pdf" in the scanner window, first page works fine but when I scan page #2 or one of the more page don't merge in the file pdf which flashes briefly in the sidebar, but still with only one page...

  I tried with another scanner (diff brand and model) and the same problem, so not a driver issue...

  any idea?

  Thanks in advance

  Stephane likes

  Best I can tell with Sierra make a pdf of many a scanner using the preview page is completely broken. Time to report through www.apple.com/feedback/.

• How to scan a document multi-page with preview in macOS Sierra with Scanner and printer Dell network?

  Hello, I know that macOS Sierra had a big problem with PDF / scanning due to an update to the pdf engine. Here we have Dell printers / scanners Dell C3765dnf Color MFP. We usually scan with Preview app (import of the device). But with macOS Sierra, the scanner scans all pages but the first page is available after the scanning process. Maybe can someone help?

  Have you tried scanning with Capture of Image?