Deactivation of the U3014 monitor

Similar Questions

• U3014 monitor hangs, not responding

  Hello

  I bought this camera last week and since I noticed that sometimes the monitor becomes unresponsive (several times a week, sometimes several times a day). Here is what I noticed:

  -Computer saving energy and monitors goes, but this monitor feeds not off but instead goes to the white screen (the other display off fine)
  -After the previous monitor does not display an image after getting out of the power save; again, made another display
  -Sometimes the screen turns off, but does not illuminate

  Common to these events, it's that the menu button (or the other buttons) do not work. The only way to get a reaction is the power button, and even in this case it does not sometimes. However, I noticed that now the button for a few seconds the stop screen always makes. After power cycling the display always comes back fine.

  Sometimes the symbol corresponding to the DVI cable (dual-link DVI-I use for 2560 x 1600 60 Hz) appears to the left upper corner of the screen and stays there. This is similar to the other crashes.

  I used to have a HP ZR24W and a Dell 2412 M connected to the PC with GTS450 (Linux) without any problems earlier. U3014 replaced the HP.

  Any suggestions?

  Finally, the problem has been resolved by replacing the unit with a new one.

• I can connect new iMAC (A1418) on my Win10 to use the iMAC monitor?

  Can I connect my new iMAC (A1418) to my Win10 so the Win10 can use the iMAC monitor?

  Read the article to use your iMac as a display with the target - Apple Support Display Mode Apple. Apple described the iMacs will work. You will probably find that you get an external display to work with your Windows machine.

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Half the Office disappears when you unplug the external monitor

  I have a MacBook (early 2011) with a single office shared between two monitors - with one hand on the internal screen and the other half on a Dell 23 inch. The Dell is my first when I use both at the same time. Until a few months ago, when I unplugged the external monitor, all windows automatically appears in the monitor to the laptop, including the menu bar and dock.

  After an operating system upgraded a few dos systems (I'm on version of El Capitan.6), when I unplug the screen seems not to register - in other words, the left side of my office, including the menu bar and the dock, and all the apps that were there just to disappear. So my laptop seems to think that the other view is always connected and direct, unless I restart with the detached monitor. (I unchecked 'Displays have separated spaces') in Mission Control.

  Is that what I can do to force the Office to redesign the internal screen? (Note that the display is a Dell S2330MX, which seem not to support any Mac OS - so who could answer the question here.) Thank you

  I've known who issues from time to time, try to close and reopen the lid, which needs to redraw your office.

• How to use the activity monitor?

  Can I use the activity monitor active processes against a list of processes that are supposed to be here vs not and if so, can someone point me in the direction where the default process for comparison?

  You have a problem or if you are curious?  I think that etrecheck would be a better choice.  You could start your mac in safe mode to see what is typical.  There is a lot of process.  I have internet google with the name of the process.  is going to be a bit tedious for all 185 or let etrecheck aside.

  You can run etrecheck, by default, it leaves aside the common process of apple.

  Download etrecheck.  Click the link to download at the bottom of the screen.

  http://etrecheck.com/

  Seal of approval

  https://discussions.Apple.com/docs/doc-8181

• Firefox opens the wrong monitor

  I have a monitor left and right, and normally FF opens on the left, but now without reason, it opens on the right side. I want to open on the left side

  gemarkk said

  I have a monitor left and right, and normally FF opens on the left, but now without reason, it opens on the right side. I want to open on the left side

  Hello

  If Firefox is maximized and then minimize the window and drag the window to the correct monitor and close Firefox to save the setting.

  After the reboot, you can maximize again.

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• Suggestion menu doesn't show is not on the second monitor. Firefox 29.0.1

  After the upgrade to version 29.0.1, I see in the drop-down menus suggestion on my second monitor.

  The menus show that only a small line black.

  This seems to happen on my secondary monitor on all the fields in the search bar, websites and connections.

  The menus still function, I can move through values with the arrow keys.

  I am Windows 8.1, Intel HD Graphics 3000.

  The main monitor works well.

  Here are some examples
  https://onedrive.live.com/redir?RESID=8F2CDA5FB6A9D21A! 913 & authkey =! ADamCtDU2Tbe2ok & v = 3 & ithint=photo%2c.jpg

  This could be a bug.

  Could test you with the use of Firefox hardware acceleration disabled? There are two ways to do:

  (1) temporarily to run Firefox in Safe Mode
  
  (2) turn off in normal mode of Firefox.

  # 1 :

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Your tabs and non-private windows must be restored (unless you have configured to not save a history of Firefox).

  Any difference?

  (To return to the normal mode, exit Firefox and restart normally.)

  # 2 :

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It takes effect after leaving and you launch Firefox, next time.

• How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

• Disappears from the main window of the activity monitor

  I'm under El Capitan 10.11.5, 15F34 build on an iMac (retina, 5K, 27 inch, mid-2015). If I open the activity monitor, I get the CPU usage, but the main window will briefly appear and disappear. If I minimize and restore, I also get it for a fraction of a second and then it seems to fall back on the dock. The history of CPU option (cmd 3) is grayed out, although I can get it as the icon in the dock.

  My question, then, is what caused this problem and how to restore to normal activity monitor?

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Problems connecting to a projector. Laptop recognizes the new monitor but projector does not display anything.

  I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.

  Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.

• 10 Firefox: Bookmarks Menu sparkles and is unusable on the secondary monitor

  After the upgrade to Firefox 10, the menu of bookmarks (and other features of the user interface) began to blink when selected. This only happens on my secondary monitor. It does not affect my main monitor. It makes Firefox unusable on the secondary monitor.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• I'm trying to calibrate a NEC monitor connected to my iMac end of 2014 running El Capitan.  Spectraview calibration software, does not recognize the NEC monitor.  Suggestions?

  I'm trying to calibrate a NEC monitor that is attached to my iMac end of 2014 El Capitan (10,11.4) running, the calibrator (Spectraview) is a dedicated to the NEC calibrator.  Unfortunately, I can't get Spectraview to recognize the NEC monitor.  Any suggestions?

  I looked on the NEC site and haven't seen El Capitan compatibilities listed.

  http://www.necdisplay.com/support-and-services/Spectra-view-II/compatibility#Mac h_os

  You should contact the support of NEC.

• Can the iPad will be the single monitor to a Mac Mini?

  For the most part, everything we do on the computer can be done with the iPad. However, there are some applications for which we need a computer that is running something other than iOS. What we have is for each family member to have an iPad, that would work for 95% of what we do and then have a Mac Mini that anyone can use for applications that do not work on an iPad. We really don't want children using a MacBook, because they are too fragile, and we do not want a monitor constantly sitting around the House. I saw a software that will transform the iPad into a monitor for the Mac Mini. Can this work as the single monitor? I consider the MacMini sitting quietly somewhere in the House, so that each of us could 'plug in' (either wireless or wired, not sure how it works) to him with an iPad when it takes more computing power. The MacMini would never be used with anything other than an iPad as a monitor. Is this possible? Thank you!

  There are apps like the Team Viewer free (for non-commercial use) and the paid LogMeIn and the GoToMyPC that allows an iPad control/use a computer...

  Do you need a real screen and keyboard initially configure the Mac