Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

Similar Questions

• problems with the coating on Macbook pro retina

  the coating on my macbook pro has disappeared... leave stains.

  It's a well-known problem: http://www.staingate.org

  Apparently Apple will replace the screen.

• iMac 27 "with the second monitor boots black with cursor

  I can't seem to find another discussion altogether as my problem starting special 'black screen ':

  New iMac 27 "retina 5K (end of 2015) running OS X El Capitan 10.11.3 with second monitor Samsung connected by Mini DP - DVI.  When starting, the two screens are displayed in black, but the cursor is available and can be moved.

  I have to make a hard stop and disconnect the second monitor to start at the login screen. Then I can reconnect the monitor and everything works.

  Any suggestions for a fix?

  So, I spent some time with Apple customer support. Several of the standard troubleshooting for problems of mystery, they came to the conclusion that there was an incompatibility of driver with the Samsung monitor at startup which is mucking things up, and I just have to accept starting with the second disconnected monitor then plug it in again after a successful login.

  Samsung does not write the monitor for Mac drivers (for some reason any), that's why the customer support figures that there is a hangup at startup. But why OS X recognize the monitor and run fine otherwise? Why only hang at boot time? And why my Mac Book Pro 2007 running the same version of El Capitan boot fine with the connected monitor? It has something to do with the Thunderbolt/mini-DP-to-DVI connection? I don't know, and I guess that Apple's Support is not either.

  I fell on a hack, which is as follows:

  1. start with the second monitor connected

  2. in the "black screen with cursor" hold the power button quite long to put the computer to sleep

  3 wake up the computer with the keyboard or trackpad or other

  4 and now the login screen will appear.

  5 log in as usual.

  6.

  I hope this helps someone. One day I'll get a more compatible monitor and it will not be a Samsung.

  They make nice dish, however.

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• Hi, I downloaded Adblock yesterday, since then my Safari is running as Aol dial up to 20 years. Do uotknow how to uninstall Adblock.Don't you think that this is the cause? MacBook Pro 2014 please help me! Thank you.

  Hi, I downloaded Adblock yesterday, since then my Safari is running as Aol dial up to 20 years. I don't know how to uninstall Adblock.Don't you think that this is the cause? MacBook Pro 2014 OS X El Capitan Version 10.11.3 retina 13 inches processor: 2.6 GHz Intel Core i5, 34,88 GB 120,11 GB free memory I must sound stupid that I don't know how to uninstall it, but I can't even find Adblock anywhere on my computer. Please help me! My nephew who is my personal COMPUTING guru is in Russia on vacation. Thank you very much.

  greekmama1

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• El Capitan v10.11.5 - problems with the second user

  Just installed 10.11.5.  I am able to log in under the master user, but when I try to log on to the second user, she just the turning wheel under the name after entering the password.  Any ideas of what I should do?  I'm not trying to delete and start again there are programs, files, etc. that are on this profile.  Thank you!

  The first time, it connects after an upgrade of the system always takes a relatively long time (maybe a minute or two) that various pieces of household necessity to do.

  If it's every time, however, you may have gotten a 'connection point' for the second user who is not compatible with 10.11.5.

  Restart in 'safe mode ':

  Try safe mode if your Mac does not end commissioning - Apple Support

  then try to connect. If this succeeds, use

  System Preferences > users and groups > login items

  and disable/enable the suspects until what you identify the problem by a process of elimination.

  If this does not work there are more complicated things to check, such as incorrect permissions and uid duplicate, but I would try first things easy.

  C.

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• Problems of heat with the mid-2015 MacBook Pro 15-inch with retina display

  MacBook Pro (retina, 15 inch, mid-2015). 2.2 GHz Intel Core i7 | OS X El Capitan (10.11.3) | 16 GB 1600 MHz DDR3 | Intel Pro Iris 1536 MB | 251 GB of Flash storage

  My 2006 13 "MacBook White would get really hot on my knees if I was using the DVD player.

  Since then, my new MacBook Pro has no disc hard turns and no great, should I feel any heat at all?

  There is an old rule to never put your laptop on your lap, because it may damage your skin. I wonder if the new MacBook Pro will become warmer over time, or if I can expect to not feel high heat.

  Is there a range?

  I did have the machine long enough to say that I have done the troubleshooting steps.

  The DVD player is not the primary heat generator, the CPU/GPU are the creators of the heat.  When you use resources intensive applications, you can expect your MBP become very hot.  Video, Skype, games, etc., are applications that will make the CPU/GPU heat, reaching temperatures in the range of 90 ° c.

  You should expect at a temperature between 40 ° c to 50 ° c when running during 'normal' light applications such as text editing and browsing the web.

  Ciao.

• New user with the iMac and MacBook Pro...

  I just ordered Lightroom 3, and while I'm waiting for delivery, I did the research so that I set up correctly from the start.  My husband and I are amateur photographers, not professionals.  So, we have a lot of pictures, but not thousands.  I take most of the photos.  I do not use RAW, but sometimes my husband does.  We use Photoshop Elements 8 to edition and iPhoto to produce books, export to our iPad, etc..  We have 2 computers... an iMac and a MacBook Pro.   All the reading I've done, I think I should install the Lightroom Catalog to the shared drive on our iMac.  All photos that we can live on this share drive (when importing we can mark with our own name so that we can each make a collection of our own photos).  As I understand it, each of us could use our own space on the iMac's Lightroom to access this library shared, to make our own edits, etc.

  First question... is what I said above correct and it seems like the best way to organize?

  Second question... it is now quite easy to access my files from my MacBook on our home network bridge.  It will be easy to access files via Lightroom when they live on the iMac but I want to use the MacBook instead?

  No help to you all, experts out there would be greatly appreciated!

  Thank you, Cindy

  Well, wireless will be /technically/ work. Because the wireless network connection simply provides a conduit through which is an extra layer of stuff system of sent files (probably AFP or SMBFS or something) for you give access to remote files and directories, you can see the performance is not acceptable.

  Some people report performance ok with remote catalogues and managed files, but many have catalog locally, with the managed pictures on drive accessible via a protocol of remote files.  Despite this, I suspect that some of these people are connected via gigabit ethernet.

  You will find that the network connection or the remote file system protocol may bring slow unreasonable things.

  Another restriction is that, under the right circumstances, Lr will change behavior to prevent you from using it in network. I forgot the exact circumstances in which this happens (I think it was reported that in other threads). I remember that it is limited to the import dialog. It will probably cause problems for you since the paths you use will probably be impossible to distinguish from local paths, but I wanted to mention it just in case.

• Print via Wi - Fi on Photosmart Premium C309 connection problem on an iMac and MacBook Pro

  Hi all

  I just bought and installed a Photosmart Premium C309.

  I am running the latest Mac OS 10.6.5 on two computers: an IMac and a MacBook Pro.

  The printer software installation went well and I was able to print via USB cable.

  Then I connected the printer to my wireless network (Modem-Router: Fritz!) Box Fon WLAN), again without problems.

  I printed out a page of the control panel the printer network Test and got "no problems found. Congratulations on the successful your printer wireless installation.

  But when I tried to print via the wireless network, I continued to get "printer offline".

  I have disabled the firewall on the computer but no joy.

  Now, I'm unable to print via the USB port that the printer is "offline".

  Help!

  Thank you

  Problem solved! It has to do with Hello.

  When you set up the printer with the HP installation wizard must install the Hello printer drivers when you are prompted to choose the drivers. Simple.

  Thank you.

• Problems with the second machine

  I have an account with creative cloud and CC (2014) CC/PS PS and LR installed on my Macbook Pro. I have the account as on my Imac. However, when I downloaded the software, it shows that all the software are only on a 30 day trial. I can't find any way to activate the software on the second machine. What am I doing wrong please.

  Bazzatee please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to solve the connection error prevents the activation of Adobe Creative Software.

• With the help of Macbook pro, chrome os x Maverick 10.9.5, Firefox; I quite often get redirected. Can you help?

  I redirected when clicking on a link. Get a quick overview of what should be the page for less than a second then redirected to an error in Yahoo or similar. Redirect seems to happen sometimes, when there is a slight delay in the loading of the selected link. Thanks for any help!

  Hello

  I suspect your browser bars such as:

  • SearchMe
  • Slick saves

  This is potentially unwanted programs (PUP) which are usually bundled with other software. Here are guides for Windows, but you may be able to remove by uninstalling their toolbars and possibly reset your Firefox profile:

  • http://malwaretips.com/blogs/remove-Searchme-toolbar/
  • http://malwaretips.com/blogs/slick-savings-virus/

  You can uninstall toolbars by entering Subject: addons in your address bar and click Extensions, or:

  • Tools (or

    

    ) > Addons > Extensions

  And remove them.

  If the above does not remove the redirection, the reset Firefox feature can also correct many issues by restoring Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.
  To reset Firefox, perform the following steps:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information. Now, should open a new tab containing your troubleshooting information.

  2. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.