I'm trying to calibrate a NEC monitor connected to my iMac end of 2014 running El Capitan.  Spectraview calibration software, does not recognize the NEC monitor.  Suggestions?

Similar Questions

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

  I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

  If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

  Lightroom Journal | Tips and advice straight from the Lightroom team.

• I am trying to install an older version of CS (CS 6). It does not recognize the serial number. What can I do?

  I am trying to install an older version of CS (CS 6). It does not recognize the serial number. What can I do?

  Hello

  Please see error "serial number is not valid for this product". Creative Suite and serial number incorrect error

  Hope that helps!

  Kind regards

  Sheena

• I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

  I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

  You click on Expert in pse before trying to add layers?

  Or it is possible that the image is 16-bit/channel.

  In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

• I have a new Apple retina pro, and tried to install a child of 3 years applecare not open on my computer, but it does not recognize the code that accompanies it. any ideas, I live in New Zealand

  I have a new Apple retina pro and I am trying to install a 3 year applecare, unopened. It will not, except the code, any ideas. I live in New Zealand

  It has expired. You can buy guaranteed nine aa.

• Where to change the settigs in xp pro.w/sp3. My pc does not recognize the dvd - rw that I put in. Have tried to reinstall, update and system restore. HELP PLEASE

  HELP, I tried a lot of things.

  OK lets see windows xp pro. with sp3, all updates are installed.

  This is an old pc he had a CD in it, and I replaced it with another pc, in working condition.

  I think it's maybe in the settings, I don't know the right one for a change.

  Parameter is not what you are referring to. The rider is wrong, the dvd device does not work or it is possible that the drive is disabled in the system BIOS, although I seriously doubt that.

  Please tell me how your drives are connected for example... IDE or SATA? If the IDE is the disk device and hard dvd connected on the same cable IDE? Tell me what is the position of the rider is on the hard drive and the dvd device. CS, master or slave.

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• Photoshop does not recognize the tablet stylus pressure. Have tried everything. Help?

  Photoshop has suddenly stopped recognizing pressure from the pen of my Tablet yetsterday.

  I use a Tablet Wacom Bamboo to connect on a Windows 8 with Photoshop CS6

  I tried:

  1. uninstall the drivers

  2. verification of the files wintab went to system32 and sysWOW64

  3 restart

  4 reinstall the drivers

  5 checking new wintab files are present

  6 restart

  I upgraded from photoshop (and repeated these 5 steps), reinstall the drivers as long as an administrator, reset the Brush tool, but little matter I have, when I go to the option of dynamic shape in Photoshop, make the triangle with the exclamation point in telling me that I need a sensitive Tablet pressure.

  I tried to plug the Tablet and then open it with photoshop.

  I tried to open Photoshop and then plug the tablet.

  I've updated the drivers for all the hardware on my computer.

  I tried the sensitivity to pressure in the other two programs (not Adobe) and it works there, so apparently not a problem with the tablet itself.

  I tried all the solutions I could find online, but none of them does not seem to work for me. Any advice?

  I just want to remind everyone, if you encounter any problems, simply insert your tablet in a different USB slot. I literally just changed my Wacom on the back of my tower to the front of my Tower and suddenly the warning on pressure of the stylus disappears and it works fine.

  It could be a case of your computer and photoshop communicate just not very well.

  Another victory at SAI.

• Photoshop does not recognize the monitor color space

  I have a screen that supports Adobe RGB color space, but when I try to open a picture saved in this color space it tells me that my workspace supports sRGB IEC... and so wonder if I want to change the color on the picture profile or keep. Can it be because its only on the calibration in the factory and the first I need to recalibrate using a calibration device? I have tryied to use google, but in fact I was not yet able to formulate it to search correctly and only found nothing that could help me.  I use the BenQ sw2700 monitor if it helps.

  suggest you to calibrate your monitor profile

  See this link for the procedure: http://www.lightroomqueen.com/articles-page/how-do-i-change-my-monitor-profile-to-check-wh ether-STI-corrupted /

• T520 DisplayPort does not recognize the HD4K monitor

  T420 race that 6.7 RHEL is unable to see a P2715Q HD4K Dell monitor DisplayPort connection. I have no problem connecting to monitors 1080 p Dell P2414H to work, but not this 4K monitor at home. Further research and discussions with colleagues suggest that DisplayPort T420 would be v1.1 and not 1.2, that could be the issue. However, I was unable to find what is the DisplayPort specification in the T420. Could be my problem? If so, is it a material restriction or is a software/firmware possible?

  Peter

  Well, I managed to do work! Put it down to user error. I finally found a Guide of the user here (http://cdn.cnetcontent.com/a6/3a/a63a60d9-e04e-4eee-bba0-58e8fcd4371f.pdf) and realized I had been connecting my DP cable into the socket of DP output! (The DP entry had been occupied by a DP - CDM cable used by the MacBook Air my daughter!) Make the right connection and it works beautifully :-)

  Peter

• I'm trying to get my computer to change printers, but it does not recognize the other printer.

  I have HP 2410 PhotoSmart all-in-one printer.  I used this drive to install it on three other computers.  So I know it's the right disc for this printer.

  I now have a NEW computer and a printer that I used.  The new printer is giving me.  He came with a disk and it says that I need a "Reinstall".
  Instead, I decided to just go back to my old printer for awhile.  But now the drive will not pick up the old printer.  He is looking for the newest printer is out of use.
  At least that's MY opinion.  What now?

  Hello

  1. What is the brand and model of the new printer?

  2. these computers is on a domain network?

  3. what happens when you tried to install the new printer?

  Looks like that the printer needs a new together drivers to make it work. The best thing you can do is that you can download and install the drivers manually on the printer manufacturer website. You need to find the correct drivers.

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Once the printer is ready, you can change the printer and set a default to use according to your wish.
  Note: applies to Windows Vista and more.

  Reference:
  Change your default printer

  http://Windows.Microsoft.com/en-in/Windows7/change-your-default-printer

  Hope this information helps. Response with status so that we can help you.

• my pc does not recognize the cd drive. I tried restoring the system without success.

  Windows does not recognize the cd drive

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I bought a new Mac to replace my windows PC. Bought 13 elements Photoshop for Mac and I tried to transfer the ss12 on my PC backup file. PE13 on Mac does not recognize the file then it will not be imported. What should do?

  Any suggestions?

  Look for the file .tly in the backup and restore to that point.

• Windows 7 does not recognize my Dell 2407WFP monitor - only as monitor not Plug-and-Play credits.

  This monitor is able to execute the resolution 1920 x 1200 and it worked well on the same laptop Dell Latitude D820 under XP Pro SP3. However, Windows 7 does not recognize the Dell Monitor (shows as non-Plug-and-Play monitor credits) and will go no higher than 1600 x 1200. The monitor on the laptop will run in 1920 x 1200 and also 1920 x 1200 poster XP running inside a virtual machine, so the problem is with Windows 7 not properly recognizing the Dell 2407WFP monitor in VGA mode. All other operating systems work very well to support the material properly.

  The laptop is running a NVidia Quadro NVS 120 M map. I tried several versions of Vista Dell drivers (do not have for Windows 7 - therefore Dell is not to follow). NVidia has no drivers for this card because it specially designed for Dell and all pilots must come from Dell (new Dell doesn't help here - I know that Windows 7 was just recently released but there are important suppliers for some time. Thought Dell was big by taking charge Microsoft with their business line of products but I think that even they cannot follow.

  It seems that the problem is also Windows 7 is not correctly identify the Dell monitor and many other monitors as well. Unfortunately, I doubt that this issue will never be resolved by Microsoft. I have yet to see that all the issues MS resolved long. I begin to see the truth in the last pub in Apple vs MS on television. Well the time to upgrade the new hardware.

  If anyone has a suggestion or a solution to solve this - I'm all ears!

  Don

  wait until that Dell publishes drivers for win 7 or you can contact them for the same thing.