deal with menu options that overlap?

Similar Questions

• State of the mouse with menu items that overlap control

  Hello

  I have a problem with the recovery of the location of the mouse using GetGraphCoordsFromPoint...

  I use the return status of GetGraphCoordsFromPoint to determine if the mouse cursor is over the plot of my graph control area (1) or not (0) to switch between styles of mouse (VAL_DEFAULT_CURSOR against VAL_CROSS_HAIR_CURSOR).

  It works in most cases...

  Above the Panel, there is a bar menu, located below is the xy graph. Now, if the mouse opens a menu and is the style of mouse on the menu (and also on the chart) depends on history of mouse:

  If the mouse has always been above the menu, it is not recognized by GetGraphCoordsFromPoint be loacted in the graph - which is what I would like to see, in this case of the style of the cursor is always the default style.

  Now, if the mouse leaves the menu for a short distance, the menu does not disappear (only if the mouse is to a greater distance) and acccordingly GetGraphCoordsFromPoint realizes that the mouse is over the chart. It is correct and as expected, too. (the style of the mouse is replaced by a sight then)

  Now, if I move the mouse over the menu, it is not recognized by GetGraphCoordsFromPoint, unfortunately, and the style of the mouse is not being in default.

  Am I missing something, or is there a way to fix this behavior? Styles different from the mouse on a menu is confusing for the user, and I would avoid it, of course

  Thank you...

  Hi Wolfgang,.

  It is not a very good way to work around this problem. As you found, Panel moving events are sent to the callback of the Committee even a menu is followed, and when you change the cursor of the mouse that it also affects any menu that can be active at a time.

  If the cursor changes do not at all while the menu is active, even if the user moves on the graph, there is a possible strategy don't mind you can pursue to remedy the situation. It consists of trying to detect if a menu is active, so that you do not change the cursor when the menu is active. Unfortunately, this is easier said than done. Although it is easy to be notified whenever a new menu is activated (via a menu drive recall) there is no right way to be notified when the menu disappears. And there are several ways in which it can disappear. So it is not possible to set an internal flag that tracks when the menu is active.

  However, it is possible to know if the menu is active at the time you receive the Panel move event (or in the timer tick event, although I'm not completely sure why you also use a timer). You can't do it with the UI CVI library, but you can, using the Windows SDK, in a way a little round point.

  The idea is to know which window is the top-level window. And if she is not the window of the Control Panel, then you should be able to assume that a menu is active and therefore refrain from changing the cursor. Note that you must also make sure that the active window belongs to your process, because there could be a number any other windows that might be the 'top' window at any time. But if it belongs to your process and it is not your Panel, then presumably it's the menu.

  I did a quick test with the following code and it seems to work, although you might want to test more thoroughly I did:

  topHwnd = GetTopWindow (NULL);
  GetWindowModuleFileName (topHwnd, topHwndModule, MAX_PATHNAME_LEN);

  GetPanelAttribute (Panel, ATTR_SYSTEM_WINDOW_HANDLE, (intptr_t *) & panelHwnd);
  GetWindowModuleFileName (panelHwnd, panelHwndModule, MAX_PATHNAME_LEN);

  If (! strcmp (topHwndModule, panelHwndModule) & panelHwnd! = topHwnd)
  return 0; do not change the cursor, unless the Panel is really on top

  Good luck

  Luis

• How to deal with Menu select when there are NULL or a value with SQL

  I have a Menu(:P_55X) SELECT with:

  "NULL VALUE DISPLAY" = NULL

  'NULL RETURN VALUE' = NULL

  The graphical query is as follows.

  
  

  SELECT NULL LINK,
  START_DATE "FOR_MONTH",
  ROUND(AVG("SLA"),3) "SLA_UPTIME"
  from SLA_TIMES_ZABBIX
  LEFT JOIN (SELECT DISTINCT NODE_NAME,OS_TYPE from CMS.CMS_NODE_OS where remove_dt is NULL) OSNODE on LOWER(SLA_TIMES_ZABBIX.NODE_NAME)=LOWER(OSNODE.NODE_NAME)
  where OS_TYPE=:P55_X group by START_DATE order by START_DATE ASC;
  

  How can I accout for the (: P55_X) variable is sometimes NULL and not null sometimes. which means I can't use the '=' when values is null because I need an IS NULL it.

  The column in the database has a value or is set to NULL.

  Thank you

  Robert

  where (OS_TYPE = :P55_X OR (:P55_X IS NULL and OS_TYPE IS NULL))
  

• How to deal with a computer that keeps overheating?

  Original title: overheating

  Overheating of 3.2 Ghz Sony Vaio system XP if hurt my machine stops - what can be done?

  The two main causes of overheating are that the CPU fan does not turn properly and that dust has accumulated inside your computer, and is inhibiting cooling.  Desktop computers can be opened and cleaned more easily than a laptop, but assuming that the fan is not the problem, you can buy a can of compressed air that can be used to blow off the dust of the computer.  Sometimes that will hold it for a while.

  HTH,
  JW

• Transparency problem with several sprites that overlap.

  [Moved from the AS3 forum - seems not to involve Actionscript 3]

  I've been programming an effect of smoke by using partially transparent images. I'm having a problem when more than two or three images begin to overlapp, their outlines or borders become visible and the overall effect is lost because you can see the different particles. I can't solve the problem. I tried to create a transparent png, I tried to use graphic tool to draw the image, but no approach I use changes the fact then when a few of these images overlap, their borders have become visible. If anyone has encountered this before? Is any way to solve?

  

  Solved: cacheAsBitmap = true;

• How can I copy recipients of a letter sent in a fresh mail I have to deal with some of the deleted recipients?

  I want to be able to select the recipients of a new mail from a mail sent. I want to be able to copy some of the recipients of those previous mail, but not all. Is there a simple way to copy all the old recipients in a single operation, and then selecting some recipients to delete in one operation?

  jazzebel2 said

  My original question remains: how to remove some of the recipients at once? Is it possible to deselect say's five recipients on 20 without each of them manually and detached, one at a time?

  Really, I've had dealing with the situation that you have described. I don't think it's possible with current TB. You may request a feature on Bugzilla request.
  https://Bugzilla.Mozilla.org/

• 5.5 Web client, right-click in Chrome now very boring with a menu that overlap, barely usable

  My setup is vSphere 5.5 with latest edition ESXi/Vcenter, and I use Google chrome 49.0 both 45.0 Firefox on my Windows 7 computer. Recently, some change has happened to Google chrome, making it extremely annoying. Please see the photo. Notice that eventually (it started to appear on April 5), every time I'm with the right button of the mouse, a window overlapping menu web client appears, preventing me from accessing some menu web client, I tried to solve this problem by selecting 'Settings' and disable flash related things (for example access flash to the camera privacy, etc.).  How can you get rid of the menu circled in red?

  Also Firefox's question, I use 4K monitor, the web client window is very small and cannot be changed even if I have the window zoom to 250-300%, no difference.

  

  Here's how I solved the problems for these who can use Firefox, I suggest that you switch to Firefox and install Adobe flash, it's difficult for me because the last Flash on Firefox does not the web interface to scale correctly on my 4K monitor, everything seems tiny.

  (1) uninstall Google chrome,

  (2) download old version of Google chrome by visiting this site:

  Download Google Chrome 46.0.2490.80 (Enterprise version for Windows - OldVersion.com

  (3) after the installation, turn off the update of Google chrome auto, here's the info:

  Disable updates of Chrome - Super user

  It will be implicitly security once you disable Chrome/flash update, if someone else finds the best solution, do not hesitate to add your opinion here.

  Update: this evening, the flash inside my google chrome (still in version 46.0.2490.80) is updated to the latest edition, automatically, I have no way to prevent this.    Now, when I use Google chrome, the annoying menu disappeared, I tried the same thing on my laptop, which hosts the last Chrome and Flash, the menu that overlap also disappeared, I wonder why?  This pi * s me off.

• The page of "Getting started with Mozilla Firefox" continues to load at startup, regardless of settings in the menu options (next to the home page that I select, as appropriate)

  This page continues to show only at startup. When I chose a different home page or a blank page in the menu options, it comes to side with them. Nothing about this is mentioned in the options / home page or start section

  You can delete all rows in user_pref since this file except the browser by default if you need this setting.

  • user_pref ("browser.shell.checkDefaultBrowser", false);

  All others are set automatically by Firefox, and should not be in user.js

• I chose an option that has eliminated the word of bookmarks in my Start menu of the page and, of course, all the rest. I want it back to the default initial value, but don't see any option to do this. currently I see: most visited, road and past news repo

  I chose an option that has replaced "bookmarks" from the menu with the most visited, commissioning and the latest headlines. I have to go back to the default value, simply "bookmarks" How do I do this?

  Don't see the menu bar not (File, Edit, View, history... (Help)? Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  See the other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• I want to add my lexmark on the desktop with an icon that opens all options... fax, scan, copy, printing, etc...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I want to add my lexmark to desktop (laptop), with an icon that opens the options fax, copy, scan, print, etc... ???

  ·    You have problems with programs

  ·    Error messages

  ·    Recent changes to your computer

  ·    What you have already tried to solve the problem

  Hi paulwarnsholz,

   

  Method 1: There should be a program of control of printer accessible from the Start Menu (Start > all programs), locate program Lexmark, right click > Send to > desktop (create shortcut)

  Check if it works for you

  You can check the link below

  To add an icon

  You might want to know
  To add a shortcut to printers on the start menu, click the Start button, click Properties, and then on the Start Menu tab, click Customize. Select the printers check box, and then click OK.

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to make a menu like that on the Web site of the State of San Diego, with Muse?

  How to make a menu like that on the Web site of the State of San Diego, with Muse? www.SDSU.edu

  Hello

  You can use the Widget Library > panels > tab panels

  or

  Click on "Objects" > add Widget > Panel > tabbed panels

  Make sure that if you want the concept of score as it appears on the site of Ref. (www.sdsu.edu), under events option in the Panel "The reversal" should be selected.

  

  Enjoy working with MUSE!

  Thank you

  Prabhakar Kumar

• I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. Any ideas please?

  I have a new mini iPad 4. I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. I don't know how it came to be. Any ideas please? Thank you.

  First try a reset to see if it finishes downloading. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait until the iPad tour starts on its own.

  Check if you can remove the application. If not go into settings > general > use iCloud and storage > storage > storage management. Wait for the list of apps to open. See if the float is on the list. If it is delete it from there.

• I got a CD with a file that has the extension .mdb. What are my options to open and view this file? Secondly, the recommendation for pc virus protection?

  I have a HP with Windows Vista Premium installed.  I got a CD with a file that has the extension .mdb.   What are my options to open and view this file?    There is a second file on the disk with an extension .ldb.   What kind of file is it?

  Second, the recommendations that you offer for pc virus protection?   My coverage of Trend Micro systems allows access to the Explorer after I disable add ons... while I am limited with respect to the capabilities of the computer.

  Thank you!

  .Mdb and .ldb file extensions are used by the Microsoft Access database program. .mdb is a .ldb file is a lock file. You may be able to consult the data base with Access runtime, downloadable here:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=d9ae78d9-9DC6-4b38-9fa6-2c745a175aed&displaylang=en

  For an antivirus that doesn't interfere too much, try Microsoft Security Essentials:http://www.microsoft.com/security_essentials/?mkt=en-us . Ensure that anti-virus programs are completely removed, with vendors removal tool, preferably before installation.

• Traffic that overlap on the device with the power of fire

  Hello world

  How should I handle the traffic that overlap on the device of firepower?

  I am inspection 2 VLANS using switches virtual, one VLAN is my edge of the internet and the other VLAN is my internal servers VLAN.

  Sometimes my internal servers to THAT VLAN needs access to internet and that traffic is superimposed on the inspection of my internet edge VLAN.

  Is there a configuration to avoid connections between connected/inspected twice?

  Thank you

  Hello

  You can create rule of the trust with areas / vlan specific or IP source/destination if you want a specific traffic does not inspect.

• I just changed my signature of account Windows Live Hotmail E-mail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important.

  Hello!

  A few weeks, I just change my signature to email hotmail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important. I went into the signing options, re-created the signature, and for 3 weeks completely removed the signature, but I always get the grey box display. Email being accessible via www.hotmail.com, and I don't have the problem, when I answer emails via my iPad2.

  Any help will be greatly appreciated, so that e-mail can be sent to the search normally. Thank you!

  Hi Paul,.

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=2